Ultimate and Primary Biodegradation of a Range of Nonpolymeric and Polymeric Surfactants in Seawater.

Surfactants are chemicals commonly used in a wide range of domestic and industrial products. In the present study, ultimate biodegradation of 18 surfactants representing different classes (including several polymeric alcohol ethoxylates [AEs]) was determined in seawater at 20 °C by a Closed Bottle test method. After 28 days of incubation, 12 surfactants reached 60% biodegradation and were considered to be readily biodegradable in seawater. The results for the six additional surfactants indicated that the 60% pass level may be reached by extended incubation time, or that reduced biodegradation could be associated with toxicity of the chemicals. All these six surfactants were biodegraded >20% after 28 days, indicative of primary biodegradation in seawater. Polymeric ethoxylates with high numbers of ethylene oxide (EO) groups (40-50 EO groups) were more slowly biodegraded than polyethoxylates with 4 to 23 EO groups. Biodegradation experiments of the AE C12 EO9 (3 to 18 EO groups) in a carousel system at 20 °C with natural seawater and a surfactant concentration of 500 µg/L showed rapid primary biodegradation by targeted analyses of the AE, with >99% primary biodegradation after 2 days of incubation. The surfactant depletion coincided with temporary formation of polyethylene glycols, suggesting that central fission is an important degradation step in seawater. A primary biodegradation experiment in the carousel system with C12 EO9 was conducted in the presence of suspended particulate materials (SPMs; marine phytoplankton and clay particles), showing that the presence of SPMs did not hamper the primary biodegradation of the surfactant. Separation of fractions in 20-µm steel filters indicated some particle association of the surfactant. Environ Toxicol Chem 2023;42:1472-1484. © 2023 SETAC.

Attenuation coefficient in the energy range 14-36 keV of 3D printing materials for physical breast phantoms.

Objective.To measure the monoenergetic x-ray linear attenuation coefficient,µ, of fused deposition modeling (FDM) colored 3D printing materials (ABS, PLAwhite, PLAorange, PET and NYLON), used as adipose, glandular or skin tissue substitutes for manufacturing physical breast phantoms.Approach. Attenuation data (at 14, 18, 20, 24, 28, 30 and 36 keV) were acquired at Elettra synchrotron radiation facility, with step-wedge objects, using the Lambert-Beer law and a CCD imaging detector. Test objects were 3D printed using the Ultimaker 3 FDM printer. PMMA, Nylon-6 and high-density polyethylene step objects were also investigated for the validation of the proposed methodology. Printing uniformity was assessed via monoenergetic and polyenergetic imaging (32 kV, W/Rh).Main results. Maximum absolute deviation ofµfor PMMA, Nylon-6 and HD-PE was 5.0%, with reference to literature data. For ABS and NYLON,µdiffered by less than 6.1% and 7.1% from that of adipose tissue, respectively; for PET and PLAorangethe difference was less than 11.3% and 6.3% from glandular tissue, respectively. PLAorangeis a good substitute of skin (differences from -9.4% to +1.2%). Hence, ABS and NYLON filaments are suitable adipose tissue substitutes, while PET and PLAorangemimick the glandular tissue. PLAwhitecould be printed at less than 100% infill density for matching the attenuation of glandular tissue, using the measured density calibration curve. The printing mesh was observed for sample thicknesses less than 60 mm, imaged in the direction normal to the printing layers. Printing dimensional repeatability and reproducibility was less 1%.Significance. For the first time an experimental determination was provided of the linear attenuation coefficient of common 3D printing filament materials with estimates ofµat all energies in the range 14-36 keV, for their use in mammography, breast tomosynthesis and breast computed tomography investigations.

Fabrication of 3D printed patient-derived anthropomorphic breast phantoms for mammography and digital breast tomosynthesis: Imaging assessment with clinical X-ray spectra.

PURPOSE: To design, fabricate and characterize 3D printed, anatomically realistic, compressed breast phantoms for digital mammography (DM) and digital breast tomosynthesis (DBT) x-ray imaging. MATERIALS: We realized 3D printed phantoms simulating healthy breasts, via fused deposition modeling (FDM), with a layer resolution of 0.1 mm and 100% infill density, using a dual extruder printer. The digital models were derived from a public dataset of segmented clinical breast computed tomography scans. Three physical phantoms were printed in polyethylene terephthalate (PET), acrylonitrile-butadiene-styrene (ABS), or in polylactic-acid (PLA) materials, using ABS as a substitute for adipose tissue, and PLA or PET filaments for replicating glandular and skin tissues. 3D printed phantoms were imaged at three clinical centers with DM and DBT scanners, using typical spectra. Anatomical noise of the manufactured phantoms was evaluated via the estimates of the ß parameter both in DM images and in images acquired via a clinical computed tomography (CT) scanner. RESULTS: DM and DBT phantom images showed an inner texture qualitatively similar to the images of a clinical DM or DBT exam, suitably reproducing the glandular structure of their computational phantoms. ß parameters evaluated in DM images of the manufactured phantoms ranged between 2.84 and 3.79; a lower ß was calculated from the CT scan. CONCLUSIONS: FDM 3D printed compressed breast phantoms have been fabricated using ABS, PLA and PET filaments. DM and DBT images with clinical x-ray spectra showed realistic textures. These phantoms appear promising for clinical applications in quality assurance, image quality and dosimetry assessments.

Quick septoplasty in children: Long-term effects on nasal breathing and dentofacial morphology. A prospective cephalometric study.

OBJECTIVE: Many authors have investigated the most appropriate surgical approach to the deviated septum in childhood, considering the obligate mouth-breathing habit a possible cause of malocclusion and disharmonious development of the facial skeleton in growing kids. Nevertheless, controversies still remain about the long-term functional/esthetic results of such procedures, mainly due to the duration of the follow-up and possible confounding factors. METHODS: 111 Caucasian children (age range: 6-13 years) were submitted to a personal "Quick" septoplasty surgical technique between 2005 and 2010. Preoperative otorhinolaryngological examination using flexible nasal endoscopy, anterior active rhinomanometry (AAR), Nasal Obstruction Septoplasty Effectiveness (NOSE) questionnaire, and dentofacial evaluation (including cephalometry) were performed. Postoperative AAR, NOSE questionnaire and cephalometric assessment were carried out in all patients at the age of 18 years. Informed consent was obtained from children's parents as appropriate. RESULTS: No surgical complication was recorded. Among our patients, a significant (p <0.001) improvement of nasal breathing resistances at AAR and NOSE questionnaire scores was found after surgery. A significant improvement in cephalometric/dental parameters (gonial angle values, anterior facial height, prevalence of class I occlusion, maxillary intermolar width, and cross-bite frequency) was noticed after the follow-up with respect to preoperative conditions. CONCLUSION: The "Quick" septoplasty technique described is a practical and conservative procedure with a low complication rate that offers long-term favourable results for the correction of nasal septum deviations in children. Nasal-breathing restoration may favor a physiological and harmonious development of craniofacial and dental structures in offspring.