Natural history of periodontal disease: The original Sri Lanka and Oslo studies.

Susceptibility to periodontal disease depends on individual factors within the host response to the bacterial challenge. The study of these factors requires longitudinal studies of an undisturbed development of the disease process. On the basis of the original longitudinal studies on the natural histology of periodontal disease staged in Sri Lanka and Oslo/Norway, several analyses of periodontal parameters and tooth status have been performed. The main findings were that in the first 20 years of complete absence of oral hygiene practices or preventive services attachment was lost at various rates. Three groups of subjects could be identified: rapidly progressing (RP) (8%), moderately progressing (MP) (81%), and subjects with no disease progression (NP) (11%). In the second two decades, the RP subjects have lost most of their teeth and no NP patients were identified anymore. The progression rate in these two decades was much slower, and the tooth mortality decreased. It could be predicted that subjects who had lost more than 2 mm at age 30 would not maintain a functional dentition at age 60. The corresponding control population in Oslo was used to study the influence of gingival inflammation on the initiation and progression of periodontal disease. The pattern and rates of attachment loss were identified in a population that was exposed to optimal and regular preventive services from age 3 onward. In the observation period of 26 years, it could be demonstrated that gingival inflammation varied little throughout adult life and always bleeding sites occurred consistently in 10% to 20%. The role of ongoing gingivitis in the pathogenesis of attachment loss was identified and also reflected stability whenever it was absent. Tooth mortality was only found in subjects with ongoing gingivitis. After 50 years of tooth age, 63% of the teeth were still maintained, while 99.8% were maintained after 50 years when gingival inflammation had been absent. Consequently, continuous gingivitis represented a risk factor for tooth loss.

Long-term stability of curve of Spee depth among orthodontically treated patients: A retrospective longitudinal study.

OBJECTIVE: The curve of Spee is deemed important characteristic of the dentition for a balanced occlusion and distribution of masticatory forces, while orthodontic levelling of an accentuated curve of Spee is generally included as a treatment goal for deepbite correction. However, relapse is often seen and can be problematic. METHODS: A retrospective longitudinal study of predominantly young patients with a deep curve of Spee, who had been treated orthodontically with 0.018"-slot Edgewise fixed appliances, was performed. The depth of the curve of Spee was digitally measured before treatment (T1), at debond (T2), and an average of 7 years post-debond (T3) and analysed statistically at 5%. RESULTS: A total of 157 patients were included (56.7% female; 11.6-year-old at T1), 16.6% of which were treated with premolars extractions. Non-extraction treatment reduced the curve of Spee at the first premolar from 1.87 mm (T1) to 0.22 mm (T2), which relapsed 0.12 mm (T3; P = .04). The respective depths for the second premolar were 2.0 mm (T1), reduced to 0.80 mm (T2). No significant relapse was seen for the second premolar (0.08 mm; P > .05) or the first permanent molar (0.06 mm; P > .05). No overall significant differences in absolute relapse were seen between extraction and non-extraction patients, but premolar extractions were associated with less clinically relevant relapse at the first molar (odds ratio 0.27; 95%-confidence interval 0.08-0.88; P = .003). CONCLUSION: Steep curves of Spee can be satisfactorily levelled orthodontically with satisfactory stability in the long term, while premolar extractions might be associated with less relapse.

Spontaneous space closure after extraction of permanent first molars in children and adolescents: a systematic review and meta-analysis.

BACKGROUND: Extraction of the permanent first molars is sometimes necessitated in children and adolescents due to deep carious lesions or developmental defects. OBJECTIVE: To estimate the prevalence of spontaneous space closure after extraction of permanent first molars and identify factors associated with it. SEARCH METHODS: Unrestricted searches in five databases for human studies until February 2024. SELECTION CRITERIA: Longitudinal before-and-after (cohort) human studies assessing eruption of the permanent second molars and spontaneous space closure after extraction of the permanent first molar. DATA COLLECTION AND ANALYSIS: Study selection, data extraction, and risk of bias assessment were performed in duplicate. Random-effects meta-analyses of average spontaneous space closure prevalences and odds ratios (OR) with their 95% confidence intervals (CI) were performed, followed by meta-regression/sensitivity/reporting biases' analyses and evaluation of our confidence in effect estimates. RESULTS: Sixteen reports pertaining to 15 studies (1 prospective /14 retrospective) were included covering 1159 patients (ages 5.5-15.0 years [mean 10.0 years]; 45% male on average) and 2310 permanent second molars. The prevalence of spontaneous space closure was higher in the maxilla (nine studies; 85.3%; 95% CI = 73.7%-92.3%) than the mandible (11 studies; 48.1%; 95% CI = 34.5%-62.0%) to a significant extent (nine studies; OR = 7.77; 95% CI = 4.99-12.11; P < 0.001). For both maxillary/mandibular second molars, Demirjian category E was associated with increased space closure odds than earlier/later stages (P < 0.05). Spontaneous space closure in the mandible was seen more often for patients ages 8-10 years (compared with older patients; three studies; OR = 3.32; 95% CI = 1.73-6.36; P < 0.001) and when the mandibular permanent third molar was present (four studies; OR = 2.28; 95% CI = 1.67-3.09; P = 0.003). Additional analyses failed to find any significant modifying factors. LIMITATIONS: The quality of evidence was very low in all instances due to the inclusion of retrospective studies with methodological issues. CONCLUSIONS: Existing evidence indicates that spontaneous space closure in children and adolescents after extraction of the permanent first molar is seen more often in the maxilla than the mandible. Extraction of the permanent first molar at the Demirjian stage E of the second molar and presence of the lower permanent third molar is associated with increased odds of space closure, but uncertainty persists, due to methodological issues of existing studies. REGISTRATION: PROSPERO (CRD42023395371).

Surface alterations and compound release from aligner attachments in vitro.

AIM: The aim of the present study was to assess the alterations in morphology, roughness, and composition of the surfaces of a conventional and a flowable composite attachment engaged with aligners, and to evaluate the release of resin monomers and their derivatives in an aqueous environment. METHODS: Zirconia tooth-arch frames (n = 20) and corresponding thermoformed PET-G aligners with bonded attachments comprising two composite materials (universal-C and flowable-F) were fabricated. The morphological features (stereomicroscopy), roughness (optical profilometry), and surface composition (ATR-FTIR) of the attachments were examined before and after immersion in water. To simulate intraoral use, the aligners were removed and re-seated to the frames four times per day for a 7-day immersion period. After testing, the eluents were analyzed by LC-MS/MS targeting the compounds Bis-GMA, UDMA, 2-HEMA, TEGDMA and BPA and by LC-HRMS for suspect screening of the leached dental material compounds and their degradation products. RESULTS: After testing, abrasion-induced defects were found on attachment surfaces such as scratches, marginal cracks, loss of surface texturing, and fractures. The morphological changes and debonding rate were greater in F. Comparisons (before-after testing) revealed a significantly lower Sc roughness parameter in F. The surface composition of the aligners after testing showed minor changes from the control, with insignificant differences in the degree of C = C conversion, except for few cases with strong evidence of hydrolytic degradation. Targeted analysis results revealed a significant difference in the compounds released between Days 1 and 7 in both materials. Insignificant differences were found when C was compared with F in both timeframes. Several degradation products were detected on Day 7, with a strong reduction in the concentration of the targeted compounds. CONCLUSIONS: The use of aligners affects the surface characteristics and degradation rate of composite attachments in an aqueous environment, releasing monomers, and monomer hydrolysates within 1-week simulated use.

Leaching from a 3D-printed aligner resin.

AIM: To quantitatively assess the degree of conversion and the water-leaching targeted compound from 3D-printed aligners. MATERIALS AND METHODS: 3D-printed aligners were made of photopolymerized resin (Tera Harz TC85A). The molecular structure and degree of conversion of the set resin were investigated by ATR-FTIR spectroscopy (n = 5). The aligners (n = 10) were immersed in double distilled water for 1 week at 37°C and the eluents were analysed using liquid chromatography/mass spectrometry methods (LC-ESI-MS/MS for urethane dimethacrylate [UDMA] and LC-APCI-MS/MS for bispenol-A [BPA]). RESULTS: The resin was composed of aliphatic vinyl ester-urethane monomers, with acrylate and/or methacrylate functionalization. The degree of conversion was estimated as to 83%. There was no detection of BPA in any of the assessed samples (0.25 µg/l). Quantifiable amounts of UDMA were detected in all the exposed samples, ranging from 29 to 96 µg/l. CONCLUSIONS: Although efficiently polymerized and BPA free, the great variability in the amount of UDMA monomer leached from the examined samples may raise concerns on potential health hazards after repeated intraoral exposure, which is indicated for this class of materials.

Artificial intelligence in medico-dental diagnostics of the face: a narrative review of opportunities and challenges.

OBJECTIVES: This review aims to share the current developments of artificial intelligence (AI) solutions in the field of medico-dental diagnostics of the face. The primary focus of this review is to present the applicability of artificial neural networks (ANN) to interpret medical images, together with the associated opportunities, obstacles, and ethico-legal concerns. MATERIAL AND METHODS: Narrative literature review. RESULTS: Narrative literature review. CONCLUSION: Curated facial images are widely available and easily accessible and are as such particularly suitable big data for ANN training. New AI solutions have the potential to change contemporary dentistry by optimizing existing processes and enriching dental care with the introduction of new tools for assessment or treatment planning. The analyses of health-related big data may also contribute to revolutionize personalized medicine through the detection of previously unknown associations. In regard to facial images, advances in medico-dental AI-based diagnostics include software solutions for the detection and classification of pathologies, for rating attractiveness and for the prediction of age or gender. In order for an ANN to be suitable for medical diagnostics of the face, the arising challenges regarding computation and management of the software are discussed, with special emphasis on the use of non-medical big data for ANN training. The legal and ethical ramifications of feeding patients' facial images to a neural network for diagnostic purposes are related to patient consent, data privacy, data security, liability, and intellectual property. Current ethico-legal regulation practices seem incapable of addressing all concerns and ensuring accountability. CLINICAL SIGNIFICANCE: While this review confirms the many benefits derived from AI solutions used for the diagnosis of medical images, it highlights the evident lack of regulatory oversight, the urgent need to establish licensing protocols, and the imperative to investigate the moral quality of new norms set with the implementation of AI applications in medico-dental diagnostics.

Using artificial intelligence to determine the influence of dental aesthetics on facial attractiveness in comparison to other facial modifications.

BACKGROUND: Facial aesthetics is a major motivating factor for undergoing orthodontic treatment. OBJECTIVES: To ascertain-by means of artificial intelligence (AI)-the influence of dental alignment on facial attractiveness and perceived age, compared to other modifications such as wearing glasses, earrings, or lipstick. MATERIAL AND METHODS: Forty volunteering females (mean age: 24.5) with near perfectly aligned upper front teeth [Aesthetic Component scale of the Index of Orthodontic Treatment Need (AC-IOTN) = 1 and Peer Assessment Rating Index (PAR Index) = 0 or 1] were photographed with a standardized pose while smiling, in the following settings (number of photographs = 960): without modifications, wearing eyeglasses, earrings, or lipstick. These pictures were taken with natural aligned dentition and with an individually manufactured crooked teeth mock-up (AC-IOTN = 8) to create the illusion of misaligned teeth. Images were assessed for attractiveness and perceived age, using AI, consisting of a face detector and deep convolutional neural networks trained on dedicated datasets for attractiveness and age prediction. Each image received an attractiveness score from 0 to 100 and one value for an age prediction. The scores were descriptively reviewed for each setting, and the facial modifications were tested statistically whether they affected the attractiveness score. The relationship between predicted age and attractiveness scores was examined with linear regression models. RESULTS: All modifications showed a significant effect (for all: P < 0.001) on facial attractiveness. In faces with misaligned teeth, wearing eyeglasses (-17.8%) and earrings (-3.2%) had an adverse effect on facial aesthetics. Tooth alignment (+6.9%) and wearing lipstick (+7.9%) increased attractiveness. There was no relevant effect of any assessed modifications or tooth alignment on perceived age (all: <1.5 years). Mean attractiveness score declined with predicted age, except when wearing glasses, in which case attractiveness was rated higher with increasing predicted age. CONCLUSIONS: Alignment of teeth improves facial attractiveness to a similar extent than wearing lipstick, but has no discernable effect on perceived age. Wearing glasses reduces attractiveness considerably, but this effect vanishes with age.

Improving headgear wear: why force level and direction of traction matter.

BACKGROUND: Empiric data on headgear wear are scarce. The aim was to examine a possible discrepancy between the duration of wearing and force application, and whether such a difference is influenced by force level or direction of traction. MATERIALS AND METHODS: In this retrospective analysis, 122 consecutive patients were included. All were treated with headgear (three subgroups: high-pull headgear [n = 60], cervical-pull headgear [n = 32], and high-pull headgear in combination with an activator [n = 30]) and were monitored for three successive months using an electronic module. The device recorded chronographically the measured force magnitude and temperature, allowing to differentiate between the duration of headgear wear (recorded body temperature) and actual force application (recorded force). RESULTS: For all subgroups, the average recorded force application was lower than wear time (mean inactivity during wear: 15.9 ± 22.8 minutes/night). The direction of traction significantly influenced the extent and length of wear time without force application (P < 0.001): patients with cervical-pull headgear were more prone to inactive wear time (27.7 minutes/night) than patients with high-pull headgear (13.7 minutes/night) or with headgear-activator (7.8 minutes/night). The observed inter-individual variability of inactive wear time was considerable (0-134 minutes/night). The mean applied force was highly significantly associated with inactive wear time (correlation coefficient: -0.575; P < 0.001), and force levels below 250 g seem particularly related to episodes of inactivity. CONCLUSIONS: There is a clear incongruity between the duration of headgear wear and the duration of force application. Inactive wear time is influenced by the direction of traction and force level applied. Clinicians should be aware of the likelihood of periods of inactive wear time and researchers should search for options to reduce or even eliminate these periods.

Roughness and wettability of aligner materials.

OBJECTIVE: The characterisation of surface roughness and energy of contemporary thermoplastic materials used in manufacturing of orthodontic aligners. DESIGN: In vitro, laboratory study. MATERIALS AND METHODS: Four commercially available thermoplastic materials were selected (CA-medium/CAM, Essix-copopyester/COP, Duran/DUR and Erkodur/ERK). Five disks from each, as received, material were tested and subjected to: (1) reflected light microscopy; (2) optical profilometry for the estimation of Sa, Sz, Sq, Sdr, Sc, Sv surface roughness parameters (n = 5); and (3) contact angle measurements with a Zisman series of liquids for the estimation of critical surface tension (γC), total work of adhesion (WA), as well as the work of adhesion due to polar (WP) and dispersion (WD) components employing the Zisman method (n = 5/liquid). Thermoformed disks were prepared against a dental stone model and the roughness parameters were calculated again Statistical analysis was performed by one-way ANOVA/ Tukey multiple comparison test and t-test (a = 0.05). RESULTS: Microscopic and profilometric analyses revealed a smooth surface texture in the as-received materials, but a very rough texture after thermoforming, with insignificant differences within each state. Significant differences in the as-received state were found in the surface energy parameters; CAM showed the lowest γC and the highest WA, WP, WD, whereas ERK with the highest γC demonstrated lower WA. COP and DUR were ranked in an intermediate group regarding γC, with a statistically significant difference in WA between them, mainly attributed to the lower WP of the former. CONCLUSION: Given the differences in surface energy parameters and the lack of roughness differences within the as received or thermoformed groups, it may be concluded that variations in the plaque retaining capacity are anticipated, determined by γC, WA and the WP, WD components.

Natural history of periodontitis: Disease progression and tooth loss over 40 years.

OBJECTIVES: To assess long-term attachment and periodontitis-related tooth loss (PTL) in untreated periodontal disease over 40 years. MATERIAL AND METHODS: Data originated from the natural history of periodontitis study in Sri Lankan tea labourers first examined in 1970. In 2010, 75 subjects (15.6%) of the original cohort were re-examined. RESULTS: PTL over 40 years varied between 0 and 28 teeth (mean 13.1). Four subjects presented with no PTL, while 12 were edentulous. Logistic regression revealed attachment loss as a statistically significant covariate for PTL (p < .004). Markov chain analysis showed that smoking and calculus were associated with disease initiation and that calculus, plaque, and gingivitis were associated with loss of attachment and progression to advanced disease. Mean attachment loss <1.81 mm at the age of 30 yielded highest sensitivity and specificity (0.71) to allocate subjects into a cohort with a dentition of at least 20 teeth at 60 years of age. CONCLUSIONS: These results highlight the importance of treating early periodontitis along with smoking cessation, in those under 30 years of age. They further show that calculus removal, plaque control, and the control of gingivitis are essential in preventing disease progression, further loss of attachment and ultimately tooth loss.

The Potential of Self-assembling Peptides for Enhancement of In Vitro Remineralisation of White Spot Lesions as Measured by Quantitative Laser Fluorescence.

PURPOSE: To test the remineralisation potential of a single application of self-assembling peptides or acidic fluoride solution using quantitative light-induced fluorescence (QLF) in vitro. MATERIALS AND METHODS: Bovine enamel disks were prepared, and white spot lesions were created on one half of the disk with an acidic buffer solution. After demineralisation, disks were allocated into three groups of 11 specimens each. Group A served as a control group and received no treatment. Group B had a single application of fluoride, and group C was treated once with self-assembling peptides. All disks were embedded in a plastic mold (diameter 15 mm, height 9 mm) with an a-silicone, and remineralisation was initiated using a pH-cycling protocol for five days. Four experimental regions on each disk were measured prior to the start of the study (T0), after demineralisation (T1) and after the remineralisation process (T2) using QLF. RESULTS: After demineralisation, all areas showed a distinct loss of fluorescence, with no statistically significant difference between the groups (ΔF from -69.3 to -10.2). After remineralisation, samples of group B (treated with fluoride) showed a statistically significant fluorescence increase (ΔF from T1 to T2 15.2 ± 7.3) indicating remineralisation, whereas the samples of control group A and group C (treated with self-assembling peptides) showed no significant changes in ΔF of 1.1 ± 1.9 and 2.5 ± 1.9, respectively. CONCLUSIONS: Application of self-assembling peptides on demineralised bovine enamel did not lead to increased fluorescence using QLF, indicating either lack of remineralisation or irregular crystals. Increased fluorescence using QLF indicated mineral gain following a single application of a highly concentrated fluoride.

Cleaning Efficacy of Manual Toothbrushes Around Brackets - A Pilot Randomised Control Trial.

PURPOSE: To test the cleaning efficacy of different manual toothbrushes in orthodontic patients in a single-blind randomised clinical trial. The brushes tested were selected based on previous in vitro tests. MATERIALS AND METHODS: Thirty-five regular orthodontic patients with a minimum of six bonded brackets on the maxillary anterior teeth were randomly assigned to three experimental groups: staged (2-level) (Candida Parodin, 12 patients) and V-shaped (Oral-B Ortho, 12 patients) toothbrush head designs were compared in a two-phase study to planar control brushes (Paro M 43, 11 patients). First, all participants were advised to brush their teeth twice daily for 2 min for 3 weeks. Prior to the start and at the end of the study, the gingival index was assessed to evaluate the level of oral hygiene. Afterwards, cleaning efficacy was assessed planimetrically by disclosing the respective teeth after two days of not performing any oral hygiene measures. RESULTS: Of the initial 35 participants, two did not attend after 3 weeks and had to be excluded. After 3 weeks, the control (5 out of 180 sites or -2.8% with GI ≥ 2) and staged groups (16 out of 216 sites or 7.5% with GI ≥ 2) showed minor improvement in the oral hygiene level. In contrast, the V-shaped group (29 out of 198 sites or 14.6 % with GI ≥ 2) showed a statistically significant improvement of the oral hygiene level. Planimetric evaluation, however, showed no superior cleaning efficacy of any of the tested head designs. CONCLUSIONS: The use of V-shaped and staged toothbrush head designs might be beneficial in patients with inadequate oral hygiene undergoing orthodontic treatment with a fixed appliance. Further large-scale investigations are, however, necessary to validate the presented results.

Structural, morphological, compositional, and mechanical changes of palatal implants after use: a retrieval analysis.

PURPOSE: The aim of this study was to characterize the surface, elemental, and mechanical alterations of orthodontic palatal implants after intraoral aging. MATERIALS AND METHOD: Nineteen consecutively retrieved implants (RET) after orthodontic treatment and three unused implants used as control (CON) were included in this study. Both groups were characterized non-destructively by Stereomicroscopy, Optical Profilometry (Sa, Sq, Sz, Sc), and SEM/EDX analysis and then destructively after metallogaphic preparation employing instrumented indentation testing (HM, EIT, ηIT, and HV) and SEM/EDX at bone-implant interface. RESULTS: All retrieved implants showed a loss of gloss with the formation of bone-like formation on the majority of them. However, no differences in surface roughness parameters were identified between macroscopically intact and retrieved regions of implants. The elements precipitated on the surface were O, C, Ca, and P while traces of Na, K, Al, S, Cl, and Mg were also identified. The surface of control sample is characterized by small pits while only Ti and Al traces were identified by EDX analysis. The presence of all the aforementioned elements apart from Ti and Al on the retrieved implants' surface should be appended to the contact of implant with bone and biological fluids while Interfacial analysis revealed a well-formed bone-implant interface. However, no significant differences were found for all mechanical properties tested between RET and CON groups. CONCLUSIONS: The results of this study indicate that retrieved palatal implant surface has undergone morphological and elemental alterations probably associated with the osseointegration process during service. Insertion and functional loading did not affect the mechanical properties of implants tested.

The nasopalatine canal, a limiting factor for temporary anchorage devices: a cone beam computed tomography data study.

OBJECTIVES: There is only little knowledge on topographical predispositions of the nasopalatine canal as a limiting factor for insertion of mid-palatal temporary anchorage devices (TAD). The purpose of the study was to assess the course of the nasopalatine canal, the adjacent vertical bone quantity, and whether it might differ among vertical facial types, using pre-existing cone beam computed tomography (CBCT) scans. MATERIAL AND METHODS: Out of a consecutive sample collected from April 2008 to August 2012, only patient data depicting both upper and lower jaw completely were evaluated retrospectively. The linear measurements were taken on the respective midsagittal view perpendicular to the palate at the level of 1st molar/2nd premolar (5/6), 2nd premolar/1st premolar (4/5), and 1st premolar/canine (3/4). Screen-prints were used to measure the inclination of the nasopalatine canal in relation to the maxillary jaw base. Maxillary and mandibular divergence was assessed on rendered lateral cephalograms. RESULTS: Out of 3869 pre-existing consecutive CBCT scans, data from 398 patients met the inclusion criteria and could be extracted. The mean vertical bone was 4.09 mm at the 5/6 level, 5.22 mm at the 4/5 level, and 3.14 mm at the 3/4 level, respectively. A statistically significant negative correlation exists between jaw divergence and the canal angulation with regard to the maxillary base. A statistically significant negative correlation exists between the canal angulation and vertical bone measurements at the 4/5 and 3/4 levels. CONCLUSIONS: Vertical bone volume is sufficient at 4/5 level for TAD placement, and bares only a small risk for neuro-sensory impairment. Therefore, only in rare cases a CBCT is justified for palatal implant placement. The course of the nasopalatine canal is negatively correlated with the vertical skeletal facial pattern pointing to the fact that in hypodivergent patients a TAD might be placed in a more distal or paramedian region.

Noninvasive palatal implant removal.

OBJECTIVE: Orthodontic palatal implants are commonly used and do provide reliable absolute anchorage to assist orthodontic treatment. However, once treatment is completed, removal of these temporary implants is not considered easy or risk free. This short communication presents a clinical case in which a novel noninvasive procedure was applied to remove an osseointegrated palatal implant. MATERIAL AND METHODS: A customized explantation tool, tightly fixed to the implant and precisely grasping the implant's head, was used in combination with a ratchet to unscrew the implant instead of the traditional removal by trephine. RESULTS: Only a topical anesthetic was necessary before the implant-bone contact was broken by turning the ratchet counterclockwise. The implant was retrieved without any local anesthesia. The explanted palatal implant had no bone appending to it, except in its apical anti-rotational grooves, and the healing process thereafter was unproblematic. CONCLUSIONS: Noninvasive palatal implant removal offers a simple and fast approach for explantation. Moreover, it might reduce the risk of adverse patient reactions, iatrogenic tooth and nerve injuries, and possible oro-antral communications.

Non-invasive removal of sandblasted and acid-etched titanium palatal implants, a retrospective study.

BACKGROUND: Short, rough-surfaced palatal implants are an established and reliable anchor for orthodontic treatment. Until recently, removal was only possible surgically using a hollow cylinder trephine. This standard method retrieves the implant combined with a larger bone volume and is therefore considered invasive and has known complications. Lately, an explantation tool which allows a sufficient force application to break the bone-implant-connection and unscrew the palatal implant was developed and, since its introduction, has been used as the method of choice in several orthodontic offices. OBJECTIVES: The aim of this study was to assess the complications caused by removing rough-surfaced palatal implants simply by unscrewing them with an explantation tool in contrast to standard protocol by surgical removal with a trephine. MATERIAL AND METHODS: The removal of 73 palatal implants using a customized explantation tool has been evaluated retrospectively and was compared to an existing sample of 44 conventional surgical explantations. RESULTS: The new clinical procedure resulted in successful removal of 71 (97.3 per cent) palatal implants. In two cases, the new method failed but removal with the established surgical method was still possible with no further complications. The non-invasive palatal implant removal with a customized explantation tool had less medical complications compared to an existing sample of surgical explantations. CONCLUSIONS: User's opinion was that the new method is more easily executed, less invasive, and also applicable without local anaesthesia. Therefore, it is considered to be beneficial for patients and the treatment approach of choice. However, further research is needed for verification.

Three dimensional anatomical exploration of the anterior hard palate at the level of the third ruga for the placement of mini-implants--a cone-beam CT study.

AIM: The aim of this retrospective investigation was to measure vertical bone thickness on the hard palate, determine areas with adequate bone for the insertion of orthodontic mini-implants (MIs), and provide clinical guidelines for identification of those areas. MATERIALS AND METHODS: Pre-treatment records of 1007 patients were reviewed by a single examiner. A total of 125 records fulfilled the inclusion criteria and were further investigated. Bone measurements were performed on cone-beam computed tomography scans, at a 90° angle to the bone surface, on 28 predetermined and standardized points on the hard palate. Bone thickness at various areas was associated to clinically identifiable areas on the hard palate by means of pre-treatment plaster models. RESULTS: Bone thickness ranged between 1.51 and 13.86 mm (total thickness) and 0.33 and 1.65 mm (cortical bone thickness), respectively. Bone thickness was highest in the anterior palate and decreased significantly towards more posterior areas. Plaster model analysis revealed that bone thickness was highest at the level of the third palatal ruga. CONCLUSIONS: The areas on the anterior palate with adequate bone thickness for successful insertion of orthodontic MI correspond to the region of the third palatal ruga. These results provide stable and clinically identifiable landmarks for the insertion of palatal MIs.

Complications and adverse patient reactions associated with the surgical insertion and removal of palatal implants: a retrospective study.

OBJECTIVES: The purpose of this study was to assess the frequency and variety of surgical complications and adverse patient reactions associated with the implantation and explantation of palatal implants. MATERIALS AND METHODS: The implantations and explantations of palatal implants in 146 patients who had undergone orthodontic treatment using a palatal implant for anchorage in the time period 1999-2010 were evaluated retrospectively. All complications and adverse patient reactions associated with the surgical intervention of implantation and explantation of the implant were assessed. RESULTS: Of the 146 palatal implants reviewed, 104 implantations and 44 explantations met the inclusion criteria and their data could be extracted. Of the 104 implantations, 25 (24.0%) surgical complications and adverse patient reactions could be documented. They consisted of lack of primary stability: 7 (6.7%), prolonged pain: 7 (6.7%), secondary bleeding: 6 (5.8%), perforation of nasal floor: 2 (1.9%), necrotic mucosa anterior of the implant: 2 (1.9%) and sensory impairment of the anterior palate: 1 (1%). The respective incidents for the 44 explantations were: disturbed wound healing: 3 (6.8%), perforation of nasal floor: 1 (2.3%), secondary bleeding: 1 (2.3%) and fracture of the implant: 1 (2.3%). CONCLUSIONS: A wide spectrum of surgical complications and adverse patient reactions after palatal implant insertion and removal was found. All complications were of minor severity and duration except after one implantation, where a prolonged hypoesthesia of the anterior palate was found. Although only a small risk of a permanent sensory impairment of the anterior palatal region remains, patients must be well informed accordingly.

Cleaning performance of electric toothbrushes around brackets applying different brushing forces: an in-vitro study.

Throughout treatment with fixed orthodontic appliances, effective plaque control is crucial to maintaining dental health. This in-vitro study evaluated the cleaning performance of eleven different brush heads of seven electric toothbrushes (oscillating-rotating and sonic motions) and varying brushing forces around orthodontic brackets. Six Mini Diamond® Twin brackets were placed on black-stained front teeth. Teeth were coated with white titanium oxide and brushed in a machine six times for one minute with two different brushing forces (1 N and 1.5 N). Eleven different brush heads were evaluated (either oscillating-rotating or sonic movements). The teeth were scanned and planimetrically evaluated after brushing. Three detailed plaque areas (DPAs) were created: proximal (< 1 mm to bracket), mid-tier (1-2 mm to bracket), and distant (> 2 mm to bracket). The proportion of contaminated proximal, mid-tier, and distant surfaces (white regions) in relation to the respective DPA was calculated. Independent of brushing forces, places with a higher distance (> 2 mm) to the orthodontic bracket had the least amount of residual contamination, followed by areas with a minor (1-2 mm) and proximal distance (< 1 mm). In all of the brushes tested and for both estimated brushing forces, the region with the highest residual contamination was the proximal area. The brush heads of the Paro® Sonic toothbrush left the least amount of residual contamination. The cleaning performance of electric toothbrushes around brackets on upper incisors varied across the brushes examined. The proximal area has the most residual contamination. Furthermore, 9 out of 11 toothbrushes cleaned more successfully with 1.5 N than with 1 N brushing force.

In-Vitro Tooth Cleaning Efficacy and Filament End Rounding of Different Manual Children's Toothbrushes.

PURPOSE: This in-vitro study aimed to investigate the cleaning efficacy of 18 different manual children's toothbrushes applying horizontal, vertical, and rotational movements, as well as to evaluate the rounding of their filament ends. MATERIALS AND METHODS: Models equipped with artificial teeth (coated with titanium dioxide) were brushed using a brushing machine with clamped manual children's toothbrushes. The machine carried out horizontal, vertical, and rotational movements for 1 min with a constant contact pressure of 100 g. The percentage of the area of titanium dioxide removed from the buccal, mesial, distal and total surfaces of the artificial teeth corresponded to the cleaning efficacy. To assess the filament design, a scanning electron microscope was used to check the morphology of the filaments which was scored with Silverstone and Featherstone scale. SPSS 22 was used for data analysis. RESULTS: The rotational and the vertical movements achieved the best cleaning efficacy with all tested toothbrushes. The vast majority of the tested toothbrushes had their poorest cleaning efficacy in the horizontal movement. Only a small part of the children's toothbrushes (3 out of 18) had a correct and acceptable proportion of rounded bristle ends. CONCLUSIONS: Based on the present results, it could be concluded that the cleaning efficacy of different manual children's toothbrushes varied considerably. The best cleaning efficacy was almost always observed for rotational and vertical movements.