Polypropylene meshes coated with a polysaccharide based bioadhesive for intra-abdominal mesh fixation in a rabbit model.

BACKGROUND: In this study, we evaluate a new bioadhesive for intra-abdominal onlay mesh fixation of a polypropylene-polyvinylchloride graft. METHODS: Three pieces of a commercially available polypropylene/polyvinylfluoride mesh, each 3 × 3 cm in size, and three pieces of the same mesh coated with a polysaccharide bioadhesive were fixated to the surface of the anterior abdominal wall of 30 New Zealand white rabbits. The fixation was performed either by using four transabdominal Prolene(®) 4/0 sutures, four spiral tacks (Protack 5 mm Tyco), or cyanoacrylate glue (Glubran(®) GEM, Viareggio, Italy). Each mesh position and the according kind of fixation were randomized before implantation. The animals were sacrificed 12 weeks postoperatively. After determining the extent of intra-abdominal adhesions, the meshes were excised en bloc with the anterior abdominal wall for tensile strength measurements and histological analysis. RESULTS: All meshes coated with the bioadhesive adhered to the intact peritoneum without extra fixation. Irrespective of the fixation technique coated meshes led to more and stronger adhesions. Mesh shrinkage by scarring was increased in coated meshes fixed with glue and low in uncoated meshes fixed with tacks. Testing the tensile strength, coated meshes fixed with transfascial sutures achieved the best results (16.14 ± 6.1 N), whereas coated meshes fixed with glue showed the lowest strength (10.39 ± 4.81 N). The foreign body reaction was considerably more distinctive using coated mesh. The mesh ingrowth was not influenced by this reaction. CONCLUSIONS: All meshes coated with the new bioadhesive were self-adhesive in that way; they stayed in position when attached to the peritoneum. Although this may facilitate intra-operative mesh fixation, the bioadhesive displayed several disadvantages, such as stronger adhesions and an increased shrinkage of the implant. The tensile strength was not influenced by the use of the bioadhesive. At present, we see no major advantage for polysaccharide bioadhesive applied in this study.

Poloxamer-based hydrogels hardening at body core temperature as carriers for cell based therapies: in vitro and in vivo analysis.

Cell-based regenerative therapies for bone defects usually employ bone precursor cells seeded on solid scaffolds. Thermosensitive hydrogels that harden at body core temperature are promising alternative cell carriers as they are applicable minimally invasively. We modified Pluronic® P123 with different chain extenders and assessed rheology and biocompatibility of the resulting hydrogels. The best candidate was tested in a rat's femoral defect model. All gels hardened above 25 °C with butane-diisocyanate-hydrogels (BDI-gels) displaying the highest storage moduli. BDI-gels showed the most favourable biocompatibility and did not affect cellular adipogenic or osteogenic differentiation in vitro. Implantation of BDI-hydrogel into femoral defects did not impede bone healing in vivo as evidenced by µCT and histological analysis. We conclude that thermosensitive BDI-gels are promising alternative cell carriers. The gels harden upon injection in vivo without interfering with bone metabolism. Further experiments will assess the gels' capacity to effectively transport living cells into bone defects.

Cyanoacrylate glue for intra-abdominal mesh fixation of polypropylene-polyvinylidene fluoride meshes in a rabbit model.

BACKGROUND: Cyanoacrylate glues are tissue adhesive with high adherent and hemostatic properties. The aim of this study was to evaluate the efficacy of cyanoacrylates glue for polypropylene-polyvinylidene fluoride (PP-PVDF) intraperitoneal onlay mesh (IPOM) fixation in a rabbit model. MATERIALS AND METHODS: In 40 New Zealand white rabbits, three pieces (3×3cm) of a PP-PVDF mesh (n=120) were fixed in IPOM technique on both sides of a midline laparotomy. For mesh fixation we used spiral tacks, nonabsorbable sutures, or cyanoacrylate glue in a randomized manner. All animals were killed after 12 wk. The prosthetic materials were excised en bloc with the anterior abdominal wall for evaluation of the tensile strength and histologic analysis. Results are presented as mean and standard deviation. RESULTS: Meshes fixed with glue showed a significantly higher tenacity of adhesions (2.75±0.97) compared with those with tacks (2.44±0.97 sutures versus 1.91±0.92 tacks). The percentage of adhesions in the glue group was comparable to the suture group (36.50% ± 27.60% glue, 37.62% ± 27.36% suture). The tensile strength of stapled and sutured meshes was significantly higher than the tensile strength glued mesh (14.15±0.97N suture versus 14.84±0.74 stapler versus 9.64±0.78N glue). Mesh shrinkage was irrespective of the fixation technique. The inflammation reaction was more pronounced in the glue group. CONCLUSIONS: Although cyanoacrylate glue showed a considerable cellular ingrowth in this rabbit model, sutures and tacks proved to be superior for IPOM fixation of PP-PVDF meshes in terms of tensile strength.

A small scale cell culture system to analyze mechanobiology using reporter gene constructs and polyurethane dishes.

Mechanical forces are translated into biochemical signals and contribute to cell differentiation and phenotype maintenance. Mesenchymal stem cells and their tissue-specific offspring, as osteoblasts and chondrocytes, cells of cardiovascular tissues and lung cells are sensitive to mechanical loading but molecules and mechanisms involved have to be unraveled. It is well established that cellular mechanotransduction is mediated e.g. by activation of the transcription factor SP1 and by kinase signaling cascades resulting in the activation of the AP1 complex. To investigate cellular mechanisms involved in mechanotransduction and to analyze substances, which modulate cellular mechanosensitivity reporter gene constructs, which can be transfected into cells of interest might be helpful. Suitable small-scale bioreactor systems and mechanosensitive reporter gene constructs are lacking. To analyze the molecular mechanisms of mechanotransduction and its crosstalk with biochemically induced signal transduction, AP1 and SP1 luciferase reporter gene constructs were cloned and transfected into various cell lines and primary cells. A newly developed bioreactor and small-scale 24-well polyurethane dishes were used to apply cyclic stretching to the transfected cells. 1 Hz cyclic stretching for 30 min in this system resulted in a significant stimulation of AP1 and SP1 mediated luciferase activity compared to unstimulated cells. In summary we describe a small-scale cell culture/bioreactor system capable of analyzing subcellular crosstalk mechanisms in mechanotransduction, mechanosensitivity of primary cells and of screening the activity of putative mechanosensitizers as new targets, e.g. for the treatment of bone loss caused by both disuse and signal transduction related alterations of mechanotransduction.

Osteonecrosis of the jaw: effect of bisphosphonate type, local concentration, and acidic milieu on the pathomechanism.

PURPOSE: Osteonecrosis of the jaw has been reported in patients receiving high doses of intravenous nitrogen-containing bisphosphonates (N-BPs) because of malignant disease. The exact pathomechanisms have been elusive and questions of paramount importance remain unanswered. Recent studies have indicated toxic effects of bisphosphonates on different cell types, apart from osteoclast inhibition. Multipotent stem cells play an important role in the processes of wound healing and bone regeneration, which seem to be especially impaired in the jaws of patients receiving high doses of N-BPs. Therefore, the aim of the present study was to investigate the effects of different bisphosphonate derivatives and dose levels combined with varying pH levels on the mesenchymal stem cells in vitro. MATERIALS AND METHODS: The effect of 2 N-BPs (zoledronate and ibandronate) and 1 non-N-BP (clodronate) on immortalized mesenchymal stem cells was tested at different concentrations, reflecting 1, 3, and 6 months and 1, 3, 5, and 10 years of exposure to standard oncology doses of the 2 N-BPs and equimolar concentrations of clodronate at different pH values (7.4, 7.0, 6.7, and 6.3). Cell viability and activity were analyzed using a WST assay. Cell motility was investigated using scratch wound assays and visualized using time-lapse microscopy. RESULTS: Both types of bisphosphonates revealed remarkable differences. Zoledronate and ibandronate showed a dose- and pH-dependent cellular toxicity. Increasing concentrations of both N-BPs and an acidic milieu led to a significant decrease in cell viability and activity (P < .01), with more pronounced effects for zoledronate. Equimolar concentrations of clodronate did not affect the cell survival or activity significantly, apart from the effect of pH reduction itself, which was also detectable in the patients in the control group who did not receive bisphosphonates. CONCLUSIONS: Our results have shown that high concentrations of N-BPs and a local acidic milieu, which is commonly present in infections of the jaw, might play a key role in the pathogenesis of osteonecrosis of the jaw in patients receiving high doses of N-BPs for malignant diseases. Also the potency of N-BPs might be different, suggesting a greater risk of osteonecrosis of the jaw with zoledronate.

Bisphosphonate-related osteonecrosis of the jaw: is pH the missing part in the pathogenesis puzzle?

Bisphosphonate-related osteonecrosis of the jaw (BRONJ) is a side effect of bisphosphonate therapy, primarily diagnosed in patients with cancer and metastatic bone disease and receiving intravenous administrations of nitrogen-containing bisphosphonates. If diagnosis or treatment is delayed, BRONJ can develop to a severe and devastating disease. Numerous studies have focused on BRONJ, with possible pathomechanisms identified to be oversuppression of bone turnover, ischemia due to antiangiogenetic effects, local infections, or soft tissue toxicity. However, the precise pathogenesis largely remains elusive and questions of paramount importance await to be answered, namely 1) Why is only the jaw bone affected? 2) Why and how do the derivatives differ in their potency to induce a BRONJ? and 3) Why and when is BRONJ manifested? The present perspective reflects on existing theories and introduces the hypothesis that local tissue acidosis in the jaw bone offers a conclusive pathogenesis model and may prove to be the missing link in BRONJ.

Bone defect reconstruction with a novel biomaterial containing calcium phosphate and aluminum oxide reinforcement.

BACKGROUND: Reconstruction of metaphyseal fractures represents a clinical challenge for orthopedic surgeons. Especially in osteoporotic bone, these fractures are frequently accompanied by osseous substance defects. In order to ensure rapid mobilization of patients, high stability requirements must be met by osteosynthesis. Various bone graft materials have been introduced in the past, such as autologous bone or exogenous bone substitute materials. These are used as bone void fillers or as augmentation techniques to ensure safe fixation of osteosynthesis. New calcium phosphate-based bone void-filling materials could be a promising alternative to autologous bone or to the currently and widely used polymethylmethacrylate (PMMA)-based cement. The aim of this study was to evaluate a novel paste-like bone void filler in vivo and in vitro with regard to biocompatibility and osteoconductivity. METHODS: In addition to in vitro testing of cell compatibility using pre-osteoblasts (MC3T3-E1), 35 Wistar rats were treated in vivo with implantation of various material mixtures based on calcium phosphate and aluminum oxide reinforcement in a metaphyseal drill hole defect. After 4 weeks, an examination by micro-computed tomography (µCT) and histology was performed. RESULTS: The in vitro analysis showed good biocompatibility with a high cell survival of osteoblasts. In the in vivo experiments, a significantly higher bone ingrowth compared to the empty defect was shown by µCT and histological analysis. Here, the group receiving material reinforced with aluminum oxide (Al2O3) showed a bone volume/tissue volume (BV/TV) of 89.19% compared to a BV/TV of 83.14% for the empty defect (p = 0.0013). In the group treated with a polysaccharide matrix, no increase in BV/TV was observed given a mean ratio of 80.14%. Scoring of histological sections did not reveal a significant difference between CaP and CaP that was substituted with Al2O3. CONCLUSION: The results of this study show an encouraging first step towards the development of new pasty, bone void-filling materials. We demonstrated that a new paste-like bone-filling material, based on calcium phosphate granulates and aluminum oxide to provide strength, exhibits good biocompatibility and osteoconductivity. Further biomechanical test in an osteoporotic animal model will have to be performed, to prove feasibility in metaphyseal defects.

Bone regeneration of minipig mandibular defect by adipose derived mesenchymal stem cells seeded tri-calcium phosphate- poly(D,L-lactide-co-glycolide) scaffolds.

Reconstruction of bone defects represents a serious issue for orthopaedic and maxillofacial surgeons, especially in extensive bone loss. Adipose-derived mesenchymal stem cells (ADSCs) with tri-calcium phosphates (TCP) are widely used for bone regeneration facilitating the formation of bone extracellular matrix to promote reparative osteogenesis. The present study assessed the potential of cell-scaffold constructs for the regeneration of extensive mandibular bone defects in a minipig model. Sixteen skeletally mature miniature pigs were divided into two groups: Control group and scaffolds seeded with osteogenic differentiated pADSCs (n = 8/group). TCP-PLGA scaffolds with or without cells were integrated in the mandibular critical size defects and fixed by titanium osteosynthesis plates. After 12 weeks, ADSCs seeded scaffolds (n = 7) demonstrated significantly higher bone volume (34.8% ± 4.80%) than scaffolds implanted without cells (n = 6, 22.4% ± 9.85%) in the micro-CT (p < 0.05). Moreover, an increased amount of osteocalcin deposition was found in the test group in comparison to the control group (27.98 ± 2.81% vs 17.10 ± 3.57%, p < 0.001). In conclusion, ADSCs seeding on ceramic/polymer scaffolds improves bone regeneration in large mandibular defects. However, further improvement with regard to the osteogenic capacity is necessary to transfer this concept into clinical use.

Characterisation of a new bioadhesive system based on polysaccharides with the potential to be used as bone glue.

Although gluing bone is in theory a very attractive alternative to classical fracture treatment, this method is not yet clinically established due to the lack of an adhesive which would meet all the necessary requirements. We therefore developed a novel two-component bioadhesive system with the potential to be used as a bone adhesive based on biocompatible and degradable biopolymers (chitosan, oxidised dextran or starch). After mixing in water, the two components covalently cross-link by forming a Schiff's base. By the same mechanism, the glue binds to any other exposed amino group such as for example those exposed in fractured bone, even in the presence of water. Modified chitosan was synthesised from commercially available chitosan by deacetylation and was then reduced in molecular weight by heating in acid. The amount of free amino groups was analysed by IR. The molecular weight was determined by viscosimetry. Starch or dextran were oxidised with periodic acid to generate aldehyde groups, which were quantified by titration. l-Dopa was conjugated to oxidised dextran or starch in analogy to the gluing mechanism of mussels. Biomechanical studies revealed that the new glue is superior to fibrin glue, but has less adhesive strength than cyanoacrylates. In vitro cell testing demonstrated excellent biocompatibility, rendering this glue a potential candidate for clinical use.

Functionalized thermosensitive hydrogel combined with tendon stem/progenitor cells as injectable cell delivery carrier for tendon tissue engineering.

Thermosensitive hydrogels have been studied for potential application as promising alternative cell carriers in cell-based regenerative therapies. In this study, a thermosensitive butane diisocyanate (BDI)-collagen hydrogel (BC hydrogel) was designed as an injectable cell delivery carrier of tendon stem/progenitor cells (TSPCs) for tendon tissue engineering. We functionalized the BDI hydrogel with the addition of 20% (v/v) collagen I gel to obtain the thermosensitive BC hydrogel, which was then seeded with TSPCs derived from human Achilles tendons. The BC hydrogel compatibility and TSPC behavior and molecular response to the 3D hydrogel were investigated. Collagen (COL) I gel served as a control group. Our findings demonstrated that the BC hydrogel was thermosensitive, and hardened above 25 °C. It supported TSPC survival, proliferation, and metabolic activity with satisfactory dimension stability and biocompatibility, as revealed by gel contraction assay, live/dead staining, DNA quantification, and resazurin metabolic assay. Phalloidin-based visualization of F-actin demonstrated that the TSPCs were stretched within COL I gel with classical spindle cell shapes; similar cell morphologies were also found in the BC hydrogel. The gene expression profile of TSPCs in the BC hydrogel was comparable with that in COL I gel. Moreover, the BC hydrogel supported capillary-like structure formation by human umbilical vein endothelial cells (HUVECs) in the hydrogel matrix. Taken together, these results suggest that the thermosensitive BC hydrogel holds great potential as an injectable cell delivery carrier of TSPCs for tendon tissue engineering.

Mechanical and biological effects of infiltration with biopolymers on 3D printed tricalciumphosphate scaffolds.

The aim of this study was to evaluate the influence of infiltrating 3D printed (TCP) scaffolds with different biodegradable polymers on their mechanical and biological properties. 3D printed TCP scaffolds with interconnecting channels measuring 450±50 µm were infiltrated with four different biodegradable copolymers. To determine the average compressive strength, a uniaxial testing system was used. Additionally, scaffolds were seeded with MC3T3 cells and cell viability was assessed by live/dead-assay. Uninfiltrated TCP had an average compression strength of 1.92±0.38 MPa. Mechanical stability was considerably increased in all infiltrated scaffolds up to a maximum of 7.36±0.57 MPa. All scaffolds demonstrated high cell survival rates with a maximum of 94±10 % living cells. In conclusion, infiltration of 3D printed tricalcium phosphate scaffolds with biodegradable polymers significantly improved mechanical properties and biological properties were comparable to those of uninfiltrated TCP scaffolds.

Novel high efficient coatings for anti-microbial surgical sutures using chlorhexidine in fatty acid slow-release carrier systems.

Sutures can cause challenging surgical site infections, due to capillary effects resulting in bacteria permeating wounds. Anti-microbial sutures may avoid these complications by inhibiting bacterial pathogens. Recently, first triclosan-resistances were reported and therefore alternative substances are becoming clinically relevant. As triclosan alternative chlorhexidine, the "gold standard" in oral antiseptics was used. The aim of the study was to optimize novel slow release chlorhexidine coatings based on fatty acids in surgical sutures, to reach a high anti-microbial efficacy and simultaneously high biocompatibility. Sutures were coated with chlorhexidine laurate and chlorhexidine palmitate solutions leading to 11, 22 or 33 µg/cm drug concentration per length. Drug release profiles were determined in aqueous elutions. Antibacterial efficacy against Staphylococcus aureus was assessed in agar diffusion tests. Biocompatibility was evaluated via established cytotoxicity assay (WST-1). A commercially triclosan-containing suture (Vicryl Plus), was used as anti-microbial reference. All coated sutures fulfilled European Pharmacopoeia required tensile strength and proved continuous slow drug release over 96 hours without complete wash out of the coated drug. High anti-microbial efficacy for up to 5 days was observed. Regarding biocompatibility, sutures using 11 µg/cm drug content displayed acceptable cytotoxic levels according to ISO 10993-5. The highest potential for human application were shown by the 11 µg/cm chlorhexidine coated sutures with palmitic acid. These novel coated sutures might be alternatives to already established anti-microbial sutures such as Vicryl Plus in case of triclosan-resistance. Chlorhexidine is already an established oral antiseptic, safety and efficacy should be proven for clinical applications in anti-microbial sutures.

Probing the interaction forces of prostate cancer cells with collagen I and bone marrow derived stem cells on the single cell level.

Adhesion of metastasizing prostate carcinoma cells was quantified for two carcinoma model cell lines LNCaP (lymph node-specific) and PC3 (bone marrow-specific). By time-lapse microscopy and force spectroscopy we found PC3 cells to preferentially adhere to bone marrow-derived mesenchymal stem cells (SCP1 cell line). Using atomic force microscopy (AFM) based force spectroscopy, the mechanical pattern of the adhesion to SCP1 cells was characterized for both prostate cancer cell lines and compared to a substrate consisting of pure collagen type I. PC3 cells dissipated more energy (27.6 aJ) during the forced de-adhesion AFM experiments and showed significantly more adhesive and stronger bonds compared to LNCaP cells (20.1 aJ). The characteristic signatures of the detachment force traces revealed that, in contrast to the LNCaP cells, PC3 cells seem to utilize their filopodia in addition to establish adhesive bonds. Taken together, our study clearly demonstrates that PC3 cells have a superior adhesive affinity to bone marrow mesenchymal stem cells, compared to LNCaP. Semi-quantitative PCR on both prostate carcinoma cell lines revealed the expression of two Col-I binding integrin receptors, α1ß1 and α2ß1 in PC3 cells, suggesting their possible involvement in the specific interaction to the substrates. Further understanding of the exact mechanisms behind this phenomenon might lead to optimized therapeutic applications targeting the metastatic behavior of certain prostate cancer cells towards bone tissue.

Osteoporosis and bisphosphonates-related osteonecrosis of the jaw: not just a sporadic coincidence--a multi-centre study.

INTRODUCTION: Bisphosphonates (BPs) are powerful drugs that inhibit bone metabolism. Adverse side effects are rare but potentially severe such as bisphosphonate-related osteonecrosis of the jaw (BRONJ). To date, research has primarily focused on the development and progression of BRONJ in cancer patients with bone metastasis, who have received high dosages of BPs intravenously. However, a potential dilemma may arise from a far larger cohort, namely the millions of osteoporosis patients on long-term oral BP therapy. PATIENTS AND METHODS: This current study assessed 470 cases of BRONJ diagnosed between 2004 and 2008 at eleven different European clinical centres and has resulted in the identification of a considerable cohort of osteoporosis patients suffering from BRONJ. Each patient was clinically examined and a detailed medical history was raised. RESULTS: In total, 37/470 cases (7.8%) were associated with oral BP therapy due to osteoporosis. The majority (57%) of affected individuals did not have any risk factors for BRONJ as defined by the American Association of Oral and Maxillofacial Surgery. The average duration of BP intake of patients without risk factors was longer and the respective patients were older compared to patients with risk factors, but no statistical significant difference was found. In 78% of patients the duration of oral BP therapy exceeded 3 years prior to BRONJ diagnosis. DISCUSSION: The results from this study suggest that the relative frequency of osteoporosis patients on oral BPs suffering from BRONJ is higher than previously reported. There is an urgent need to substantiate epidemiological characteristics of BRONJ in large cohorts of individuals.

Membrane-based cultures generate scaffold-free neocartilage in vitro: influence of growth factors.

Scaffold-free cultures provide promising potential in chondrogenic differentiation of human mesenchymal stem cells (hMSCs). In this study, a novel scaffold-free membrane-based culture system, in which hMSCs were cultivated on a cellulose acetate membrane filter at medium-gas interface, was evaluated for chondrogenesis under the addition of growth factors. Chondrogenic differentiation of hMSCs has been described in scaffold-free pellet cultures with good results. In our study membrane-based cultures (1 x 10(6) hMSCs) were produced, maintained at the medium-gas interface and cultured for 21 days. Results were compared with findings from standard pellet cultures (2.5 x 10(5) hMSCs). The effects of the following growth factors were examined: human transforming growth factor-beta(3) (TGF-beta(3)) +/- insulin-like growth factor-1 or +/- human fibroblast growth factor 2. After 3 weeks of culture, chondrogenesis was assessed by Safranin-O staining, immunohistochemistry, a dimethylmethylene blue dye binding assay for glycosaminoglycans, and quantitative real-time polymerase chain reaction for cartilage-specific proteins. Membrane-based cultures containing growth factors formed hemispherical structures with a large surface area (65 mm(2)). When removed from the membrane they showed a histologically smooth cartilage-like surface. Membrane-based cultures stained positive for Safranin-O and collagen type II and contained a high content of glycosaminoglycans. Expression of cartilage-specific markers like collagen type II, aggrecan, and SOX9 was observed under the addition of TGF-beta(3), whereas combinations of growth factors let to a significant increase of collagen type II expression. A markedly reduced expression of collagen type X was found in membrane-based cultures when only TGF-beta(3) was added. Pellet cultures showed similar results besides an increased expression of collagen type X and type II that were observed. Membrane-based cultures provide a differentiation system, comparable in chondrogenesis to pellet cultures, which is able to generate scaffold-free neocartilage. The key benefit factors of membrane-based cultures are a histologically smooth cartilage-like surface and reduced expression of collagen type X, both of which are suitable features for its future application in cartilage regeneration.

Quantitative polymerase chain reaction as a reliable method to determine functional lentiviral titer after ex vivo gene transfer in human mesenchymal stem cells.

BACKGROUND: Human mesenchymal stem cells (hMSCs) are a promising target for ex vivo gene therapy and lentiviruses are excellent gene transfer vehicles in hMSCs since they achieve high transduction rates with long-term gene expression. Nevertheless, senescence of hMSCs may limit therapeutic applications due to time-consuming cell selection and viral titration. Here, we describe a fast and reliable method to determine functional lentiviral titer by quantitative polymerase chain reaction (qPCR) after highly efficient ex vivo gene transfer in hMSCs. METHODS: Lentivirus production was tested with different types of packaging systems. Using p24 ELISA remaining viral particles were detected in the cell culture supernatant. The lentiviral gene transfer efficiency was quantified by FACS analysis. Lentiviral titers were determined by qPCR of expressed transgenes. RESULTS: Third-generation self-inactivating vectors showed highly efficient gene transfer in hMSCs. No viral antigen was detected in the cell culture supernatant after four media changes, suggesting the absence of infectious particles after 4 days. We observed a linear correlation between virus dilution and level of transgene expression by qPCR analysis, therefore allowing viral titering by quantification of transgene expression. Finally, we demonstrated that transduced hMSCs retained their stem cell character by differentiation towards adipogenic, osteogenic and chondrogenic lineages. CONCLUSIONS: Quantification of transgene copy numbers by qPCR is a fast and reliable method to determine functional lentiviral titer after ex vivo gene transfer in hMSCs.

New advances in fluorochrome sequential labelling of teeth using seven different fluorochromes and spectral image analysis.

Fluorochrome sequential labelling of mineralizing tissues is commonly used in different fields of clinical and basic research. Recently we improved polychrome fluorescent sequential labelling of bone by applying spectral image analysis to discriminate seven different fluorochromes. Although basic mineralization processes of bone and teeth follow comparable principles, the respective tissues differ in terms of matrix composition and mineral assembly. The aim of this study therefore was to investigate the feasibility of this new technique for polychrome sequential labelling of teeth and to demonstrate the advantages in the field of dentistry. Furthermore, the exact labelled area of each fluorochrome could be measured, even in regions of overlapping fluorochromes. The technique presented may provide a basis for further investigations of mineralization processes of different anatomical dental structures.