Micro-computed tomographic analysis of the morphology of maxillary lateral incisors.

OBJECTIVE: This study aimed to investigate the morphology of maxillary lateral incisors (MxLI) using micro-computed tomography (micro-CT). MATERIALS AND METHODS: The root canal configurations (RCC) of maxillary lateral incisors (MxLI) of a mixed Swiss-German population were examined using micro-CT, 3D imaging, and a 4-digit system code indicating the main root canal from coronal to apical thirds and the main foramina number. RESULTS: The most frequently observed RCC of MxLI were 1-1-1/1 (Vertucci I/Ve I, 80.0%), 1-1-2/2 (Ve V, 7.3%), 1-2-1/1 (Ve III, 6.4%), 2-1-1/1 (Ve II, 1.8%), and 1-1-1/2 (1.8%)(n = 110). Three additional RCC were observed less frequently (0.9%). The MxLI showed one physiological foramen in 89.1%, two in 9.1%, and seldom three (1.8%). Most accessory canals were identified in the apical third of a root (20.0%), and no accessory canals in 72.7% of the samples. CONCLUSIONS: Detailed information on the internal morphology of MxLI of a Swiss-German population is given. The most frequently observed RCC of MxLI is 1-1-1/1 (Ve I). However, accessory canals may occur in all apical thirds, and 20% of all teeth investigated showed a challenging RCC for clinical treatment. CLINICAL RELEVANCE: This study offers clinicians comprehensive data on MxLI morphology, emphasizing the significance of understanding varied RCC and accessory canal presence for improving root canal treatment outcomes. Over 25% of teeth exhibited complex RCC or accessory canals, influencing decisions during root canal treatment.

Effect of the antirheumatic medication methotrexate (MTX) on biomechanical compressed human periodontal ligament fibroblasts (hPDLFs).

BACKGROUND: The aim of this study was to investigate the in vitro effect of the antirheumatic drug methotrexate (MTX) on biomechanically compressed human periodontal ligament fibroblasts (hPDLFs), focusing on the expression of interleukin 6 (IL-6), as its upregulation is relevant to orthodontic tooth movement. METHODS: Human PDLFs were subjected to pressure and simultaneously treated with MTX. Cell proliferation, viability and morphology were studied, as was the gene and protein expression of IL-6. RESULTS: Compared with that in untreated fibroblasts, IL-6 mRNA expression in mechanically compressed ligament fibroblasts was increased (two to sixfold; ****p < 0.0001). Under compression, hPDLFs exhibited a significantly more expanded shape with an increase of cell extensions. MTX with and without pressure did not affect IL-6 mRNA expression or the morphology of hPDLFs. CONCLUSION: MTX has no effect on IL-6 expression in compressed ligament fibroblasts.

A comparative study of cyanoacrylate-based tissue adhesive and surgical sutures on marginal flap stability following coronally advanced flap.

INTRODUCTION: The present study evaluated the biomechanical characteristics of cyanoacrylate-based tissue adhesive (TA) compared to surgical sutures in coronally advanced flap (CAF) procedures using an ex-vivo model. MATERIAL AND METHODS: Thirty-six half-pig mandibles were divided into three groups, n=12 each: (I) CAF fixed with sutures (sling and tag suture technique), (II) CAF fixed with TA, and (III) CAF fixed with sutures and TA. At mandibular premolars, gingival recession defects extending 3 mm apical to the cemento-enamel junction (CEJ) were created. CAF procedures were performed using a split-full-split approach, with coronal advancement of the flap to 1 mm above the marked CEJ and stabilization according to the respective groups I-III. Marginal flap stability against pull-of forces (maximum tensile force) was measured with a universal material testing machine until the CEJ became visible. RESULTS: The comparison between groups I-III demonstrated a significantly increased maximum tensile force for the TA (II) compared to the suture group (I) (p<0.001). A significantly increased maximum tensile force was found for the suture and TA (III) compared to the suture group (I) (p<0.001). There was also a significantly increased maximum tensile force in the suture and TA (III) compared to the TA group (II) (p<0.001). CONCLUSION: The results suggest that cyanoacrylate-based TA can increase marginal flap stability compared to sutures in CAF procedures. CLINICAL RELEVANCE: Cyanoacrylate-based TA can be considered a useful and valuable adjunct to conventional suturing techniques in periodontal plastic surgery, especially in cases where high flap stability is required. The results of this ex-vivo study can only be transferred to the clinical situation with limitations. Clinical long-term follow-up data must be generated.

The working angle in low-abrasive air polishing has an influence on gingival damage-an ex vivo porcine model.

OBJECTIVES: To investigate the influence of instrumentation angle during low-abrasive air polishing (LAA) on the oral gingiva using an ex vivo porcine model. MATERIAL AND METHODS: Six tissue samples from each of 14 porcine mandibles were randomly selected and instrumented. Two different LAA powders (glycine 25 µm, tagatose 15 µm) were investigated. An application angle of either 30-60° or 90° was selected. Gingival specimens from different mandibles served as untreated references. Gingival biopsies were examined by scanning electron microscopy and paraffin histology for tissue destruction using a five-level scale. RESULTS: LAA caused significantly less tissue damage at a 90° angle than at a 30-60° angle. This effect was seen in both the glycine-based powder arms (p = 0.002, p = 0.046) and the tagatose-based powder arms (p = 0.003, p = 0.011). However, at identical working angles, the two powders did not show significant differences in terms of gingival erosion (p = 0.79 and p = 0.57; p = 0.91 and p = 0.78, respectively). CONCLUSIONS: LAA may cause less tissue damage at an application angle of 90°. Consequently, it seems advisable to air-polish the soft tissue as perpendicularly as possible. Additionally, glycine and tagatose LAA powders do not seem to differ in concern of soft tissue damage. CLINICAL RELEVANCE: Within the limitations of this ex vivo animal model, this study argues for an application that is as close as possible to the 90° angle intending to minimize soft tissue damage. Manufacturer specifications, however, mainly request applications deviating from the right angle. In order to work in interdental areas using LAA safely, the use of subgingival nozzles might be considered.

Effectiveness and Safety of Over-the-Counter Tooth-Whitening Agents Compared to Hydrogen Peroxide In Vitro.

(1) This study investigated the whitening effect, cytotoxicity and enamel surface alterations induced by different over-the-counter (OTC) bleaching agents in comparison to hydrogen peroxide. (2) Human teeth (n = 60) were randomly assigned into 6 groups (n = 10), stained with coffee solution for 7 d, followed by a whitening period of 7 d with either placebo, bromelain, sodium bicarbonate, sodium chlorite, PAP or hydrogen peroxide. Color measurements were performed with a spectrophotometer. Scanning electron micrographs (SEM) were taken to assess the enamel structure. Cytotoxicity of the tested substances was assessed based on the cell viability of primary human fibroblasts. (3) The application of all whitening gels resulted in a greater color difference of the enamel (ΔE) in comparison to the negative control. Hydrogen peroxide caused the greatest color difference. Bromelain and PAP treatment showed no enamel surface changes, in contrast to hydrogen peroxide treatment, which showed very mild interprismatic dissolution. Bromelain was the only non-cytotoxic agent. (4) The maximum effect achieved by all OTC bleaching agents was the removal of stains, whereas hydrogen peroxide was capable of further whitening the teeth. Bromelain treatment was neither cytotoxic, nor resulted in enamel surface alterations, and its whitening effect was less, yet still effective, compared to hydrogen peroxide.

Biomechanical evaluation of cyanoacrylate-based tissue adhesive for intraoral wound closure.

OBJECTIVES: The aim of this study was to analyze the biomechanical characteristics of a novel cyanoacrylate-based tissue adhesive (CTA) for soft-tissue closure of the (non-) tooth-bearing alveolar process and around dental implants. MATERIALS AND METHODS: Halves of porcine mandibles (n = 21) were randomly divided into three experimental intraoral wound closure groups (A-C) with three different mucoperiosteal flap types (F1-3, n = 7 each): F1, crestal incision between the last incisor and the canine with a mesial and distal vestibular relief; F2, crestal double-T-shaped incision and dental implant placement between the canine and the first premolar; and F3, trapezoidal incision on the second premolar. F1-3 were respectively closed using (A) monofil non-resorbable sutures, (B) CTA, and (C) a combination of both. Tensile strength (TS) and elasticity (E) measurements were performed for biomechanical analysis. RESULTS: In F1, CTA showed a significantly reduced TS compared to A (p < 0.001) and C (p < 0.01). In F2, an increased TS of C compared to A (p < 0.01) and B (p < 0.001) was found. Here, E was significantly increased in C compared to B (p < 0.02). In F3, TS was significantly decreased in B compared to A (p < 0.01) and C (p < 0.001). The E in group C was significantly increased compared to B (p < 0.01). CONCLUSIONS: Different biomechanical characteristics between CTA and sutures were found. CTA could be a possible alternative to sutures for intraoral wound closure in special conditions. CLINICAL RELEVANCE: A combination of both, suturing and CTA, could be a promising option in critical soft-tissue wounds requiring high functional stability and elasticity.

Biomechanical analysis of the human derived soft tissue graft Epiflex for use in oral soft tissue augmentation.

PURPOSE: This study aimed to investigate the biomechanical properties, cell migration, and revascularization of the acellular dermal matrix Epiflex. As a decellularized, freeze-dried human skin graft, Epiflex has broad applications in medical fields, particularly in implantology and dentistry. Understanding its biomechanical characteristics is crucial for its clinical adoption as a novel soft tissue graft option. METHODS: Epiflex (n = 3) was evaluated in comparison to palatal tissue from body donors (n = 3). Key metrics, such as elongation and tear resistance, were quantified. Both graft types underwent histological analysis and scanning electron microscopy. Additionally, the healing properties of Epiflex were assessed using a Chorioallantoic Membrane (CAM) Assay. RESULTS: Biomechanically, Epiflex (mean = 116.01 N) demonstrated the ability to withstand greater forces (p = 0.013) than human palatal tissue (mean = 12.58 N). When comparing the elongation, no significant difference was measured (ASG mean = 9.93 mm, EF mean = 9.7 mm). Histologically, Epiflex exhibited a loosely connected network of collagen fibers with a dense upper layer. The CAM Assay indicated efficient revascularization. CONCLUSION: Epiflex appears to be a viable option for soft tissue augmentation, particularly appealing to patient groups who avoid all or specific animal-derived products due to ethical or religious reasons.

The orobasal organ (of Ackerknecht): A bizarre structure of the mammalian oral cavity.

Vestigial organs are considered to have lost most or all of their functions through evolution. However, these structures can give insights into the phylogenetic history of species. Additionally, vestigial organs can be of clinical importance, since these structures might be confused with pathologies. The orobasal organ of Ackerknecht was discovered by and named after the veterinary anatomist Eberhard Ackerknecht. In 1912, he described morphologically highly variable epithelial invaginations behind the lower medial incisors in different mammalian species. The orobasal organ is considered a rudimentary structure without physiological function, but the evolutionary history of the orobasal organ remains unknown, so far. In this review, we sum up the actual knowledge about the orobasal organ and discuss possible origins of this structure. With this review, we hope to increase awareness of this anatomical structure, and thereby decrease the risk of confusion with a pathological condition like oral cancer.

Internal Morphology of Mandibular Second Premolars Using Micro-Computed Tomography.

To examine root canal morphology of mandibular second premolars (Mn2P) of a mixed Swiss-German population by means of micro-computed tomography (micro-CT). Root canal configuration (RCC) of 102 Mn2P were investigated using micro-CT unit (µCT 40; SCANCO Medical AG, Brüttisellen, Switzerland) with 3D software imaging (VGStudio Max 2.2; Volume Graphics GmbH, Heidelberg, Germany), described with a four-digit system code indicating the main root canal from coronal to apical thirds and the number of main foramina. A total of 12 different RCCs were detected. 1-1-1/1 (54.9%) was most frequently observed RCC, followed by 1-1-1/2 (14.7%), 1-1-2/2 (10.8%), 1-2-2/2 (4.9%), 1-1-3/3 (3.9%), 1-1-1/3 (2.9%), 2-1-1/1 (2.9%) and less frequently 1-1-2/3, 1-2-1/2, 2-1-2/2, 1-1-2/5, 1-1-1/4 with each 1.0%. No accessory foramina were present in 35.3%, one in 35.3%, two in 21.6%, three and four in 2.9%, and five in 2.0%. In 55.9% Mn2Ps, accessory root canals were present in apical third and 8.8% in middle third of a root. Connecting canals were observed less frequently (6.9%) in apical and 2.9% in the middle third, no accessory/connecting canals in coronal third. Every tenth tooth showed at least or more than three main foramina. Almost two thirds of the sample showed accessory root canals, predominantly in apical third. The mainly single-rooted sample of Mn2Ps showed less frequent morphological diversifications than Mn1Ps.

Internal morphology of 101 mandibular canines of a Swiss-German population by means of micro-CT: An ex vivo study.

The aim of this study was to investigate the root canal system morphology by means of a root canal configuration (RCC) classification described with a four-digit system, the physiological foramen geometry and accessory canal frequency and morphology, of 101 mandibular canines (MaCa) of a Swiss-German population by means of micro-computed tomography. Micro-CT examination of the MaCa was performed and the obtained images analyzed with a 3D imaging software. In single-rooted MaCas, the most frequently observed RCCs were 1-1-1/1 (74.5%) and 1-1-1/2 (14.3%). Seven other RCCs were less frequently observed with a frequency from 4.1 to 1.0%. One physiological foramen was observed in 80.6% of the MaCas, two in 16.3%, three in 1.0% and four in 2.0%. Accessory and connecting canals were apparent only in the middle and apical root thirds. Two-rooted MaCas occurred less frequently (n = 3). When one physiological foramen was present, the mean size of the narrow and wide diameters were 0.28 mm (± 0.07) and 0.40 mm (± 0.11), while the distance between physiological and anatomical foramen was 0.45 mm (± 0.17). MaCas are predominantly single-rooted teeth with a 1-1-1/1 or 1-1-1/2 RCC. Most MaCas had one physiological foramen with an oval shape.