Dental microwear and Pliocene paleocommunity ecology of bovids, primates, rodents, and suids at Kanapoi.

Reconstructions of habitat at sites like Kanapoi are key to understanding the environmental circumstances in which hominins evolved during the early Pliocene. While Australopithecus anamensis shows evidence of terrestrial bipedality traditionally associated with a more open setting, its enamel has low δ13C values consistent with consumption of C3 foods, which predominate in wooded areas of tropical Africa. Habitat proxies, ranging from paleosols and their carbonates to associated herbivore fauna and their carbon isotope ratios, suggest a heterogeneous setting with both grass and woody plant components, though the proportions of each have been difficult to pin down. Here we bring dental microwear texture analysis of herbivorous fauna to bear on the issue. We present texture data for fossil bovids, primates, rodents, and suids (n = 107 individuals in total) from the hominin bearing deposits at Kanapoi, and interpret these in the light of closely related extant mammals with known differences in diet. The Kanapoi bovid results, for example, are similar to those for extant variable grazers or graze-browse intermediate taxa. The Kanapoi suid data vary by taxon, with one similar to the pattern of extant grazers and the other more closely resembling mixed feeders. The Kanapoi primates and rodents are more difficult to associate with a specific environment, though it seems that grass was likely a component in the diets of both. All taxa evince microwear texture patterns consistent with a mosaic of discrete microhabitats or a heterogeneous setting including both tree and grass components.

Dental microwear texture analysis and diet in the Dmanisi hominins.

Reconstructions of foraging behavior and diet are central to our understanding of fossil hominin ecology and evolution. Current hypotheses for the evolution of the genus Homo invoke a change in foraging behavior to include higher quality foods. Recent microwear texture analyses of fossil hominin teeth have suggested that the evolution of Homo erectus may have been marked by a transition to a more variable diet. In this study, we used microwear texture analysis to examine the occlusal surface of 2 molars from Dmanisi, a 1.8 million year old fossil hominin site in the Republic of Georgia. The Dmanisi molars were characterized by a moderate degree of surface complexity (Asfc), low textural fill volume (Tfv), and a relatively low scale of maximum complexity (Smc), similar to specimens of early African H. erectus. While caution must be used in drawing conclusions from this small sample (n = 2), these results are consistent with continuity in diet as H. erectus expanded into Eurasia.

Mouth Care in Assisted Living: Potential Areas for Improvement.

BACKGROUND: Poor oral care may lead to systemic disease, and there is evidence that assisted living (AL) residents lack quality oral care; in AL, poor care may be due to staff knowledge and attitudes, as well as organizational barriers to providing care. OBJECTIVES: Determine AL staff knowledge and attitudes regarding mouth care and barriers to changing care. DESIGN: Self-administered repeated-measures questionnaires completed before and after oral care training. SETTING AND PARTICIPANTS: A total of 2012 direct care staff and administrators from 180 AL communities. METHODS: Nine knowledge questions and 8 attitude and practice intention questions, and open-ended questions regarding training and obstacles to providing oral care. RESULTS: Overall, 2012 participants completed pretraining questionnaires, and 1977 completed posttraining questionnaires. Baseline knowledge was high, but staff were not uniformly aware of the systemic-oral link whereby mouth care affects pneumonia and diabetes. Almost all staff reported learning a new technique (96%), including for residents who resist care (95%). Suggested areas to improve mouth care included having more hands-on experience. The primary perceived obstacles to care centered around residents who resist care and a lack of time. CONCLUSIONS AND IMPLICATIONS: Based on reports of having benefitted from training, AL staff overwhelmingly noted that new knowledge was helpful, suggesting the benefit of skills-based training, especially in dementia care. Mouth care in AL has been sorely understudied, and merits additional attention.

Craniofacial biomechanics and functional and dietary inferences in hominin paleontology.

Finite element analysis (FEA) is a potentially powerful tool by which the mechanical behaviors of different skeletal and dental designs can be investigated, and, as such, has become increasingly popular for biomechanical modeling and inferring the behavior of extinct organisms. However, the use of FEA to extrapolate from characterization of the mechanical environment to questions of trophic or ecological adaptation in a fossil taxon is both challenging and perilous. Here, we consider the problems and prospects of FEA applications in paleoanthropology, and provide a critical examination of one such study of the trophic adaptations of Australopithecus africanus. This particular FEA is evaluated with regard to 1) the nature of the A. africanus cranial composite, 2) model validation, 3) decisions made with respect to model parameters, 4) adequacy of data presentation, and 5) interpretation of the results. Each suggests that the results reflect methodological decisions as much as any underlying biological significance. Notwithstanding these issues, this model yields predictions that follow from the posited emphasis on premolar use by A. africanus. These predictions are tested with data from the paleontological record, including a phylogenetically-informed consideration of relative premolar size, and postcanine microwear fabrics and antemortem enamel chipping. In each instance, the data fail to conform to predictions from the model. This model thus serves to emphasize the need for caution in the application of FEA in paleoanthropological enquiry. Theoretical models can be instrumental in the construction of testable hypotheses; but ultimately, the studies that serve to test these hypotheses - rather than data from the models - should remain the source of information pertaining to hominin paleobiology and evolution.

Polysaccharide-based films for the prevention of unwanted postoperative adhesions at biological interfaces.

Postoperative adhesions protect, repair, and supply nutrients to injured tissues; however, such adhesions often remain permanent and complicate otherwise successful surgeries by tethering tissues together that are normally separated. An ideal adhesion barrier should not only effectively prevent unwanted adhesions but should be easy to use, however, those that are currently available have inconsistent efficacy and are difficult to handle or to apply. A robust hydrogel film composed of alginate and a photo-crosslinkable hyaluronic acid (HA) derivative (glycidyl methacrylate functionalized hyaluronic acid (GMHA)) represents a solution to this problem. A sacrificial porogen (urea) was used in the film manufacture process to impart macropores that yield films that are more malleable and tougher than equivalent films produced without the sacrificial porogen. The robust mechanical behavior of these templated alginate/GMHA films directly facilitated handling characteristics of the barrier film. In a rat peritoneal abrasion model for adhesion formation, the polysaccharide films successfully prevented adhesions with statistical equivalence to the leading anti-adhesion technology on the market, Seprafilm®. STATEMENT OF SIGNIFICANCE: Postoperative adhesions often remain permanent and complicate otherwise successful surgeries by tethering tissues together that are normally separated and pose potentially significant challenges to patients. Therefore, the generation of adhesion barriers that are easy to deploy during surgery and effectively prevent unwanted adhesions is a big challenge. In this study robust hydrogel films composed of alginate and a photo-crosslinkable hyaluronic acid (HA) derivative (glycidyl methacrylate functionalized HA, GMHA) were fabricated and investigated for their potential to act as a solution to this problem using a rat peritoneal abrasion model for adhesion formation. We observed the polysaccharide films successfully prevented adhesions with statistical equivalence to the leading anti-adhesion technology on the market, Seprafilm®, suggesting that such films represent a promising strategy for the prevention of postoperative adhesions.

Folivory or fruit/seed predation for Mesopithecus, an earliest colobine from the late Miocene of Eurasia?

Here we compare dental microwear textures from specimens of the fossil genus Mesopithecus (Cercopithecidae, Colobinae) from the late Miocene of Eastern Europe with dental microwear textures from four extant primate species with known dietary differences. Results indicate that the dental microwear textures of Mesopithecus differ from those of extant leaf eaters Alouatta palliata and Trachypithecus cristatus and instead resemble more closely those of the occasional hard-object feeders Cebus apella and Lophocebus albigena. Microwear texture data presented here in combination with results from previous analyses suggest that Mesopithecus was a widespread, opportunistic feeder that often consumed hard seeds. These data are consistent with the hypothesis that early colobines may have preferred hard seeds to leaves.

Technical note: Dental microwear textures of "Phase I" and "Phase II" facets.

The power stroke of mastication has been traditionally divided into two parts, one which precedes centric occlusion, and the other which follows it-"Phase I" and "Phase II," respectively. Recent studies of primate mastication have called into question the role of Phase II in food processing, as they have found little muscle activity or accompanying bone strain following centric occlusion. That said, many researchers today look to Phase II facets to relate diet to patterns of dental microwear. This suggests the need to reevaluate microwear patterns on Phase I facets. Here we use texture analysis to compare and contrast microwear on facets representing both phases in three primate species with differing diets (Alouatta palliata, Cebus apella, and Lophocebus albigena). Results reaffirm that microwear patterns on Phase II facets better distinguish taxa with differing diets than do those on Phase I facets. Further, differences in microwear textures between facet types for a given taxon may themselves reflect diet. Some possible explanations for differences in microwear textures between facet types are proposed.

Direct comparisons of 2D and 3D dental microwear proxies in extant herbivorous and carnivorous mammals.

The analysis of dental microwear is commonly used by paleontologists and anthropologists to clarify the diets of extinct species, including herbivorous and carnivorous mammals. Currently, there are numerous methods employed to quantify dental microwear, varying in the types of microscopes used, magnifications, and the characterization of wear in both two dimensions and three dimensions. Results from dental microwear studies utilizing different methods are not directly comparable and human quantification of wear features (e.g., pits and scratches) introduces interobserver error, with higher error being produced by less experienced individuals. Dental microwear texture analysis (DMTA), which analyzes microwear features in three dimensions, alleviates some of the problems surrounding two-dimensional microwear methods by reducing observer bias. Here, we assess the accuracy and comparability within and between 2D and 3D dental microwear analyses in herbivorous and carnivorous mammals at the same magnification. Specifically, we compare observer-generated 2D microwear data from photosimulations of the identical scanned areas of DMTA in extant African bovids and carnivorans using a scanning white light confocal microscope at 100x magnification. Using this magnification, dental microwear features quantified in 2D were able to separate grazing and frugivorous bovids using scratch frequency; however, DMTA variables were better able to discriminate between disparate dietary niches in both carnivorous and herbivorous mammals. Further, results demonstrate significant interobserver differences in 2D microwear data, with the microwear index remaining the least variable between experienced observers, consistent with prior research. Overall, our results highlight the importance of reducing observer error and analyzing dental microwear in three dimensions in order to consistently interpret diets accurately.

Implications of diet for the extinction of saber-toothed cats and American lions.

The saber-toothed cat, Smilodon fatalis, and American lion, Panthera atrox, were among the largest terrestrial carnivores that lived during the Pleistocene, going extinct along with other megafauna ∼12,000 years ago. Previous work suggests that times were difficult at La Brea (California) during the late Pleistocene, as nearly all carnivores have greater incidences of tooth breakage (used to infer greater carcass utilization) compared to today. As Dental Microwear Texture Analysis (DMTA) can differentiate between levels of bone consumption in extant carnivores, we use DMTA to clarify the dietary niches of extinct carnivorans from La Brea. Specifically, we test the hypothesis that times were tough at La Brea with carnivorous taxa utilizing more of the carcasses. Our results show no evidence of bone crushing by P. atrox, with DMTA attributes most similar to the extant cheetah, Acinonyx jubatus, which actively avoids bone. In contrast, S. fatalis has DMTA attributes most similar to the African lion Panthera leo, implying that S. fatalis did not avoid bone to the extent previously suggested by SEM microwear data. DMTA characters most indicative of bone consumption (i.e., complexity and textural fill volume) suggest that carcass utilization by the extinct carnivorans was not necessarily more complete during the Pleistocene at La Brea; thus, times may not have been "tougher" than the present. Additionally, minor to no significant differences in DMTA attributes from older (∼30-35 Ka) to younger (∼11.5 Ka) deposits offer little evidence that declining prey resources were a primary cause of extinction for these large cats.

A comparison of salivary pH in sympatric wild lemurs (Lemur catta and Propithecus verreauxi) at Beza Mahafaly Special Reserve, Madagascar.

Chemical deterioration of teeth is common among modern humans, and has been suggested for some extinct primates. Dental erosion caused by acidic foods may also obscure microwear signals of mechanical food properties. Ring-tailed lemurs at the Beza Mahafaly Special Reserve (BMSR), Madagascar, display frequent severe tooth wear and subsequent tooth loss. In contrast, sympatric Verreaux's sifaka display far less tooth wear and infrequent tooth loss, despite both species regularly consuming acidic tamarind fruit. We investigated the potential impact of dietary acidity on tooth wear, collecting data on salivary pH from both species, as well as salivary pH from ring-tailed lemurs at Tsimanampesotse National Park, Madagascar. We also collected salivary pH data from ring-tailed lemurs at the Indianapolis Zoo, none of which had eaten for at least 12 hr before data collection. Mean salivary pH for the BMSR ring-tailed lemurs (8.098, n=41, SD=0.550) was significantly more alkaline than Verreaux's sifaka (7.481, n=26, SD=0.458). The mean salivary pH of BMSR (8.098) and Tsimanampesotse (8.080, n=25, SD=0.746) ring-tailed lemurs did not differ significantly. Salivary pH for the Indianapolis Zoo sample (8.125, n=16, SD=0.289) did not differ significantly from either the BMSR or Tsimanampesotse ring-tailed lemurs, but was significantly more alkaline than the BMSR Verreaux's sifaka sample. Regardless of the time between feeding and collection of pH data (from several minutes to nearly 1 hr), salivary pH for each wild lemur was above the "critical" pH of 5.5, below which enamel demineralization occurs. Thus, the high pH of lemur saliva suggests a strong buffering capacity, indicating the impact of acidic foods on dental wear is short-lived, likely having a limited effect. However, tannins in tamarind fruit may increase friction between teeth, thereby increasing attrition and wear in lemurs. These data also suggest that salivary pH varies between lemur species, corresponding to broad dietary categories.