Bioactive and mechanically stable hydroxyapatite patterning for rapid endothelialization of artificial vascular graft.

Polymeric vascular grafts have been widely used in the vascular regeneration field because of their ease of application. However, synthetic polymer grafts have the severe problem of low biocompatibility, which may cause delayed endothelialization and hyperplasia. In this study, we fabricated a linear hydroxyapatite (HA) pattern on a silicon wafer and then transferred the pattern to a poly(L-lactic)-acid (PLLA) film for use as a tubular vascular graft. The HA pattern with its characteristic needle-like shape was successfully embedded into the PLLA. The HA-patterned PLLA film exhibited superior mechanical stability compared with that of a HA-coated PLLA film under bending, elongation, and in vitro circulation conditions, suggesting its suitability for use as a tubular vascular graft. In addition, the HA pattern guided rapid endothelialization by promoting proliferation of endothelial cells and their migration along the pattern. The hemocompatibility of the HA-patterned PLLA was also confirmed, with substantially fewer platelets adhered on its surface. Overall, in addition to good mechanical stability, the HA-patterned PLLA exhibited enhanced biocompatibility and hemocompatibility compared with pure PLLA.

Porous calcium phosphate-collagen composite microspheres for effective growth factor delivery and bone tissue regeneration.

Microspheres are beneficial for filling defects of various shapes and provide a large surface area for cell attachment. Porous microspheres have attracted particular attention because they can deliver cells and bioactive molecules such as growth factors. In this study, BCP-collagen composite microspheres were developed for growth factor delivery in bone regeneration. Firstly, porous biphasic calcium phosphate (BCP) microspheres were fabricated by applying a water-in-oil emulsion technique using camphene as a pore generator. Then, porous BCP-collagen composite microspheres were fabricated by repetitively dip coating the microspheres in a collagen solution to effectively deliver growth factor to bone defects. Characterization of the microspheres and in vitro studies were conducted to investigate the effect of collagen infiltration on bone regeneration. In addition, in vitro evaluation demonstrated the sustained bone morphogenetic protein-2 (BMP-2) delivery of the microspheres and the effect of cell differentiation, and in vivo assessment with rabbits revealed that the microspheres filled the defect well and that bone could be regenerated through the microspheres. Moreover, the composite system was more effective for bone regeneration than the bare BCP microspheres because of the drug retention of collagen. These findings indicate that the porous microspheres are effective for tissue regeneration by continuous growth factor delivery.

Use of thioglycerol on porous polyurethane as an effective theranostic capping agent for bone tissue engineering.

Thiolated biodegradable polyurethane (TG-DPU) was synthesized using a one-pot reaction with thioglycerol adopted as a functionalized chain extender. After characterization of the chemical structure of TG-DPU using proton nuclear magnetic resonance spectroscopy, bone morphogenetic protein (BMP-2) was loaded in the TG-DPU under oxidative conditions to form disulfides between the free thiol of TG-DPU and BMP-2. The interaction between TG-DPU and BMP-2, so-called bioconjugates, was investigated using X-ray photoelectron spectroscopy analysis; the appearance of disulfide (S-S) linkage indicated the formation of a polymer/growth factor conjugate system. The covalently linked bioconjugates provided stability with minimal loss during the drug delivery with prolonged release performance in in vitro release tests. The effects of the drugs delivered by TG-DPU were also confirmed by in vitro alkaline phosphatase tests using pre-osteoblasts and in vivo bone regeneration tests. The drugs effectively induced cell differentiation and promoted mature bone recovery.

Fluorine-ion-releasing injectable alginate nanocomposite hydrogel for enhanced bioactivity and antibacterial property.

The creation of a moist environment and promotion of cell proliferation and migration together with antibacterial property are critical to the wound-healing process. Alginate (Alg) is an excellent candidate for injectable wound dressing materials because it can form a gel in a mild environment. Taking advantage of its gelation property, an injectable nano composite hydrogel containing nano-sized (about 90 nm) calcium fluoride (CaF2) particles was developed using in-situ precipitation process. The amount of released fluorine (F-) ion from the nanocomposite hydrogel increased with increasing CaF2 content inside the composite hydrogel and the ions stimulated both the proliferation and migration of fibroblast cells in vitro. The antibacterial property of the composite hydrogel against E. coli and S. aureus was confirmed through colony formation test where the number of bacterial colonies significantly decreased compared to Alg hydrogel. The in vivo results based on a full-thickness wound model showed that the nanocomposite hydrogel effectively enhanced the deposition of the extracellular matrix compared to that of the Alg hydrogel. This study demonstrates the potential of this nanocomposite hydrogel as a bioactive injectable wound-dressing material with the ability to inhibit bacterial growth and stimulate cell proliferation and migration for accelerated wound healing.

Biomimetic porous Mg with tunable mechanical properties and biodegradation rates for bone regeneration.

The medical applications of porous Mg scaffolds are limited owing to its rapid corrosion, which dramatically decreases the mechanical strength of the scaffold. Mimicking the bone structure and composition can improve the mechanical and biological properties of porous Mg scaffolds. The Mg structure can also be coated with HA by an aqueous precipitation coating method to enhance both the corrosion resistance and the biocompatibility. However, due to the brittleness of HA coating layer, cracks tend to form in the HA coating layer, which may influence the corrosion and biological functionality of the scaffold. Consequently, in this study, hybrid poly(ether imide) (PEI)-SiO2 layers were applied to the HA-coated biomimetic porous Mg to impart the structure with the high corrosion resistance associated with PEI and excellent bioactivity with SiO2. The porosity of the Mg was controlled by adjusting the concentration of the sodium chloride (NaCl) particles used in the fabrication via the space-holder method. The mechanical measurements showed that the compressive strength and stiffness of the biomimetic porous Mg increased as the portion of the dense region increased. In addition, following results show that HA/(PEI-SiO2) hybrid-coated biomimetic Mg is a promising biodegradable scaffold for orthopedic applications. In-vitro testing revealed that the proposed hybrid coating reduced the degradation rate and facilitated osteoblast spreading compared to HA- and HA/PEI-coating scaffolds. Moreover, in-vivo testing with a rabbit femoropatellar groove model showed improved tissue formation, reduced corrosion and degradation, and improved bone formation on the scaffold. STATEMENT OF SIGNIFICANCE: Porous Mg is a promising biodegradable scaffold for orthopedic applications. However, there are limitations in applying porous Mg for an orthopedic biomaterial due to its poor mechanical properties and susceptibility to rapid corrosion. Here, we strategically designed the structure and coating layer of porous Mg to overcome these limitations. First, porous Mg was fabricated by mimicking the bone structure which has a combined structure of dense and porous regions, thus resulting in an enhancement of mechanical properties. Furthermore, the biomimetic porous Mg was coated with HA/(PEI-SiO2) hybrid layer to improve both corrosion resistance and biocompatibility. As the final outcome, with tunable mechanical and biodegradable properties, HA/(PEI-SiO2)-coated biomimetic porous Mg could be a promising candidate material for load-bearing orthopedic applications.

Enhanced Osseointegration Ability of Poly(lactic acid) via Tantalum Sputtering-Based Plasma Immersion Ion Implantation.

Poly(lactic acid) (PLA) is the most utilized biodegradable polymer in orthopedic implant applications because of its ability to replace regenerated bone tissue via continuous degradation over time. However, the poor osteoblast affinity for PLA results in a high risk of early implant failure, and this issue remains one of the most difficult challenges with this technology. In this study, we demonstrate the use of a new technique in which plasma immersion ion implantation (PIII) is combined with a conventional DC magnetron sputtering. This technique, referred to as sputtering-based PIII (S-PIII), makes it possible to produce a tantalum (Ta)-implanted PLA surface within 30 s without any tangible degradation or deformation of the PLA substrate. Compared to a Ta-coated PLA surface, the Ta-implanted PLA showed twice the surface roughness and substantially enhanced adhesion stability in dry and wet conditions. The strong hydrophobic surface properties and biologically relatively inert chemical structure of PLA were ameliorated by Ta S-PIII treatment, which produced a moderate hydrophilic surface and enhanced cell-material interactions. Furthermore, in an in vivo evaluation in a rabbit distal femur implantation model, Ta-implanted PLA demonstrated significantly enhanced osseointegration and osteogenesis compared with bare PLA. These results indicate that the Ta-implanted PLA has great potential for orthopedic implant applications.