Determination of catecholamine in human serum by a fluorescent quenching method based on a water-soluble fluorescent conjugated polymer-enzyme hybrid system.

In this paper, a sensitive water-soluble fluorescent conjugated polymer biosensor for catecholamine (dopamine DA, adrenaline AD and norepinephrine NE) was developed. In the presence of horse radish peroxidase (HRP) and H(2)O(2), catecholamine could be oxidized and the oxidation product of catecholamine could quench the photoluminescence (PL) intensity of poly(2,5-bis(3-sulfonatopropoxy)-1,4-phenylethynylenealt-1,4-poly(phenylene ethynylene)) (PPESO(3)). The quenching PL intensity of PPESO(3) (I(0)/I) was proportional to the concentration of DA, AD and NE in the concentration ranges of 5.0 × 10(-7) to 1.4 × 10(-4), 5.0 × 10(-6) to 5.0 × 10(-4), and 5.0 × 10(-6) to 5.0 × 10(-4) mol L(-1), respectively. The detection limit for DA, AD and NE was 1.4 × 10(-7) mol L(-1), 1.0 × 10(-6) and 1.0 × 10(-6) mol L(-1), respectively. The PPESO(3)-enzyme hybrid system based on the fluorescence quenching method was successfully applied for the determination of catecholamine in human serum samples with good accuracy and satisfactory recovery. The results were in good agreement with those provided by the HPLC-MS method.

Hemodialysis performance and anticoagulant activities of PVP-k25 and carboxylic-multiwall nanotube composite blended Polyethersulfone membrane.

Non-covalent electrostatic interaction between amide nitrogen and carbonyl carbon of shorter chain length of polyvinylpyrrolidone (PVP-k25) was developed with in-house carboxylic oxidized multiwall carbon nanotubes (O-MWCNT) and then blended with Polyethersulfone (PES) polymer. FTIR analysis was utilized to confirm bonding nature of nano-composites (NCs) of O-MWCNT/PVP-k25 and casting membranes. Non-solvent induces phase separation process developed regular finger-like channels in composite membranes whereas pristine PES exhibited spongy entities as studied by cross sectional analysis report of FESEM. Further, FESEM instrument was also utilized to observe the dispersion of O-MWCNT/PVP based nanocomposite (NCs) with PES and membranes leaching phenomena analysis. Contact angle experiments described 24% improvement of hydrophilic behaviour, leaching ratio of additives was reduced to 1.89%, whereas water flux enhanced up to 6 times. Bovine serum albumin (BSA) and lysozyme based antifouling analysis shown up to 25% improvement, whereas 84% of water flux was regained after protein fouling than pristine PES. Anticoagulant activity was reported by estimating prothrombin, thrombin, plasma re-calcification times and production of fibrinogen cluster with platelets-adhesions photographs and hemolysis experiments. Composite membranes exhibited 3.4 and 3 times better dialysis clearance ratios of urea and creatinine solutes as compared to the raw PES membrane.

Novel dummy molecularly imprinted polymers for matrix solid-phase dispersion extraction of eight fluoroquinolones from fish samples.

A series of novel dummy molecularly imprinted polymers (DMIPs) were prepared as highly class-selective sorbents for fluoroquinolones. A non-poisonous dummy template, daidzein, was used for the first time to create specific molecular recognition sites for fluoroquinolones in the synthesized polymers. The influence of porogen polarity on dummy molecular imprinting effect was studied. The DMIP prepared using dimethylsulfoxide-acetonitrile (1:1.8, v/v) as porogen achieved the highest imprinting factors (IF) for fluoroquinolones over a range of IF 13.4-84.0. This DMIP was then used for selective extraction of eight fluoroquinolones (fleroxacin, ofloxacin, norfloxacin, pefloxacin, ciprofloxacin, lomefloxacin, enrofloxacin and gatifloxacin) from fish samples based on dummy molecularly imprinted matrix solid-phase dispersion (DMI-MSPD). The extracted fluoroquinolones were subsequently analyzed by high-performance liquid chromatography (HPLC) equipped with a fluorescence detector (FLD). The developed method had acceptable recoveries (64.4-102.7%) and precision (RSDs: 1.7-8.5%, n=5) for determination of fluoroquinolones in fish samples fortified at levels of 10 and 100ngg(-1). The limits of detection (LODs) for identification of eight fluoroquinolones ranged between 0.06 and 0.22ngg(-1). The results demonstrated great potential of the optimized method for sample preparation in routine analysis of trace fluoroquinolones in fish samples.

Highly class-selective solid-phase extraction of bisphenols in milk, sediment and human urine samples using well-designed dummy molecularly imprinted polymers.

Dummy molecularly imprinted polymers (DMIPs) towards bisphenols (BPs) were prepared employing 1,1,1-tris(4-hydroxyphenyl)ethane (THPE) and phenolphthalein (PP) as dummy templates. The selectivity of the resulting DMIPs was evaluated by high-performance liquid chromatography (HPLC). Both PP-DMIP and THPE-DMIP showed excellent class selectivity towards bisphenols. THPE-DMIP prepared using the template molecule with three hydroxyphenyl functionalities achieved higher imprinting factors (IF) for the bisphenols over a range of 7.9-19.8. An efficient approach based on dummy molecularly imprinted solid phase extraction (DMISPE) coupled with HPLC-DAD was developed for selective extraction of eight bisphenols in sediment, milk and human urine samples using THPE-DMIP as sorbents. The method showed good recoveries (82-102%) and precision (RSD 0.2-4%, n=3) for these samples spiked at two concentration levels (25 and 250ngg(-1) or ngmL(-1)). The detection limits ranged between 0.6 and 1.1ngg(-1) or ngmL(-1). Efficient removal of sample matrix and interferences was also achieved for these samples after DMISPE process. The results demonstrated great potential of the optimized methods for sample preparation in the routine analysis of trace BPs in complex samples.

Highly selective dummy molecularly imprinted polymer as a solid-phase extraction sorbent for five bisphenols in tap and river water.

A simple and fast method for both dummy template selection and polymer composition optimization is proposed here. A series of dummy templates for bisphenols imprinting were screened by running them on a non-imprinted polymer (NIP) column with porogen solvent as mobile phase. The tested dummy templates mainly involved bisphenol S (BPS), bromobisphenol A (TBBPA), bisphenol F (BPF), bisphenol E (BPE), bisphenol B (BPB), bisphenol AF (BPAF), 2,2',6,6'-tetramethyl-4,4'-sulfonyldiphenol (BS-TM) and 4,4'-diaminodiphenylmethane (DADPM). Different monomers and porogens were also investigated for BPS and DADPM using the same method. BPS dummy template was finally selected with acetonitrile and 4-VP as porogen and monomer. The resulting dummy molecularly imprinted polymer (DMIP) achieved superior affinities for BPF, BPE, BPA, BPB and BPAF with imprinting factors 14.5, 13.8, 8.7, 5.7 and 4.2, respectively. An efficient method based on BPS-DMIP-SPE coupled with HPLC-UV was developed for selective extraction of BPF, BPE, BPA, BPB and BPAF in water samples. The method showed excellent recoveries (89.4-102.0%) and precision (RSD 0.3-4.8%, n=5) for tap and river water samples spiked at three concentration levels each (40, 200 and 1000ngL(-1)). The detection limits ranged between 2.2 and 3.8ngL(-1) with a sample volume of 500mL. The result demonstrated the superiority of the optimized method for selective extraction of BPs in water samples at the ngL(-1) level.