Fabrication of a highly sensitive electrochemical sensor based on electropolymerized molecularly imprinted polymer hybrid nanocomposites for the determination of 4-nonylphenol in packaged milk samples.

Herein, an imprinted electrochemical sensor based on graphene-Au nanoparticles incorporated with molecularly imprinted polymer (MIP) was fabricated for determination of 4-nonylphenol (4-NP). Grafted MIP electropolymerized on nanoscale multilayer films electrode was achieved using 4-NP as a template and P-aminothiophenol as a functional monomer. The electrochemical properties of the MIP nanoscale multilayer membrances were characterized and measured by cyclic voltammetry and differential pulse voltammetry techniques; using ferrocyanide/ferricyanide-redox marker. Several important parameters were optimized and investigated to improve the performance of the sensor. Under the optimized conditions, the developed sensor showed an excellent linear response over the concentration ranges of 50-500 ng mL-1 (4-NP) with a detection limit of 0.01 ng mL-1(S/N = 3). The developed sensor showed a good selective recognition of 4-NP compared with structural analogue, exhibited a good reproducibility and accuracy with long-term stability. At last, the feasibility of the proposed methodology was successfully applied fordetection of 4-NP in milk and its packaging materials.

A sensitive chemiluminescence enzyme immunoassay based on molecularly imprinted polymers solid-phase extraction of parathion.

The chemiluminescence enzyme immunoassay (CLEIA) method responds differently to various sample matrices because of the matrix effect. In this work, the CLEIA method was coupled with molecularly imprinted polymers (MIPs) synthesized by precipitation polymerization to study the matrix effect. The sample recoveries ranged from 72.62% to 121.89%, with a relative standard deviation (RSD) of 3.74-18.14%.The ratio of the sample matrix-matched standard curve slope rate to the solvent standard curve slope was 1.21, 1.12, 1.17, and 0.85 for apple, rice, orange and cabbage in samples pretreated with the mixture of PSA and C18. However, the ratio of sample (apple, rice, orange, and cabbage) matrix-matched standard-MIPs curve slope rate to the solvent standard curve was 1.05, 0.92, 1.09, and 1.05 in samples pretreated with MIPs, respectively. The results demonstrated that the matrices of the samples greatly interfered with the detection of parathion residues by CLEIA. The MIPs bound specifically to the parathion in the samples and eliminated the matrix interference effect. Therefore, the CLEIA method have successfully applied MIPs in sample pretreatment to eliminate matrix interference effects and provided a new sensitive assay for agro-products.

A highly selective electrochemical sensor based on molecularly imprinted polypyrrole-modified gold electrode for the determination of glyphosate in cucumber and tap water.

An electrochemical sensor based on molecularly imprinted polypyrrole (MIPPy) was developed for selective and sensitive detection of the herbicide glyphosate (Gly) in cucumber and tap water samples. The sensor was prepared via synthesis of molecularly imprinted polymers on a gold electrode in the presence of Gly as the template molecule and pyrrole as the functional monomer by cyclic voltammetry (CV). The sensor preparation conditions including the ratio of template to functional monomers, number of CV cycles in the electropolymerization process, the method of template removal, incubation time, and pH were optimized. Under the optimal experimental conditions, the DPV peak currents of hexacyanoferrate/hexacyanoferrite changed linearly with Gly concentration in the range from 5 to 800 ng mL-1, with a detection limit of 0.27 ng mL-1 (S/N = 3). The sensor was used to detect the concentration of Gly in cucumber and tap water samples, with recoveries ranging from 72.70 to 98.96%. The proposed sensor showed excellent selectivity, good stability and reversibility, and could detect the Gly in real samples rapidly and sensitively. Graphical abstract Schematic illustration of the experimental procedure to detect Gly using the MIPPy electrode.

Development of magnetic molecularly imprinted polymers for selective extraction of Benzoxazolinone-type alkaloids from acanthus plants.

Benzoxazolinone-type alkaloids found in Acanthus ebracteatus and Acanthus ilicifolius Linnaeus possess various beneficial properties, such as antileishmanial, antipyretic, analgesic, antibacterial, and antioxidant effects. In this study, we employed a surface imprinting technique on nanomaterials. We utilized functionalized Fe3O4@SiO2NH2 as a scaffold, with 2-benzoxazolinone and 2H-1,4-benzoxazin-3(4H)-one serving as dual templates, methacrylic acid (MAA) as a functional monomer, ethylene glycol dimethacrylate (EGDMA) as a crosslinker, and 2,2-azodiisobutyric nitrile (AIBN) as the initiator. Prior to polymerization, we screened functional monomers using ultraviolet (UV) spectroscopy. The resulting magnetic surface molecular imprinting polymer (Fe3O4@SiO2@MIP) was thoroughly characterized using Fourier transform infrared spectrometry (FT-IR), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). We also conducted assessments of its adsorption isotherms, dynamics, and selective binding capabilities. Our findings indicate that the MIPs exhibited exceptional selective recognition performance. Through meticulous screening and optimization of extraction and separation conditions, we established an LC‒MS/MS method based on magnetic solid-phase extraction technology. The method exhibited a recovery range of 78.80-106.99 % (RSD, 0.46-3.31 %) for 2-benzoxazolinone, with a limit of detection (LOD) and limit of quantification (LOQ) of 2.85 and 9.00 µg L-1, respectively. For 2H-1,4-benzoxazin-3(4H)-one, the method yielded a recovery range of 84.75-103.53 % (RSD, 0.07-5.96 %), with an LOD and LOQ of 3.60 and 12.60 µg L-1, respectively, in real samples. The resulting Fe3O4@SiO2@MIP demonstrated a high capacity for class-specific adsorption.

Preparation of metal-organic framework @molecularly imprinted polymers for extracting N-nitrosamines in salted vegetables.

In this paper, the novel metal-organic framework @molecularly imprinted polymers were prepared and applied in extracting N-nitrosamines from salted vegetables. The imprinted polymers were coated on the surface of MIL-101 using multi-dummy template molecules (5-nonanol, benzhydrol and N-formylpyrrolidine). The characterization and adsorbing experiments showed that the hybrid imprinted polymers presented spherical particles with typically core-shell structure, and exhibited high adsorption capacity (maximum capacity: 46.85 mg/g) and fast equilibrium rate (only 5 min) for N-nitrosamines. Various parameters (sample loading solvent, pH, washing solvent, elution solvent and elution volume) affecting solid-phase extraction were optimized. Under the optimum conditions, the solid-phase extraction process based on the hybrid polymers combined with high performance liquid chromatography-ultraviolet detection method was established and applied to analyze N-nitrosamines in different salted vegetables. The results showed that the developed method produced the linear relationship between the peak areas versus the N-nitrosamines concentrations of 0.2-10 µg/g with limit of detections from 20.6 to 76.1 ng/g. The spiked recovery of N-nitrosamines in the salted vegetable samples was in the range of 66-100.5 % with relative standard deviation from 0.1 to 3.4 %. Those results demonstrated that the established method was sensitive and efficient for directly enriching and analyzing trace N-nitrosamines in salted vegetables.

Synthesis of metal-organic framework @molecularly imprinted polymer adsorbents for solid phase extraction of organophosphorus pesticides from agricultural products.

The novel core-shell structural zeolitic imidazolate framework-8 @molecularly imprinted polymers were successfully synthesized by surface imprinting technique and used as adsorbents for solid-phase extraction of organophosphorus pesticides. The obtained hybrid composites were characterized by scanning electron microscopy, transmission electron microscopy and Fourier-transform infrared, and their adsorbing and recognition performance were evaluated by binding experiments. The results showed that zeolitic imidazolate framework-8 @molecularly imprinted polymers presented a typically core-shell structure with molecularly imprinted shell (about 50 nm) homogeneously polymerized on the surface of zeolitic imidazolate framework-8 core, and exhibited specific recognition towards organophosphorus pesticides with fast adsorption capacity. The adsorption and desorption conditions including sample loading solvent, sample pH, washing and elution solvent were optimized. Under optimum conditions, the solid-phase extraction based on zeolitic imidazolate framework-8 @molecularly imprinted polymers combined with high liquid chromatography-tandem mass spectrometry method for determining organophosphorus pesticides was established and exhibited good linearity (R2 ≥ 0.9927) in the range of 1-200 µg/L. With spiked at three different concentration levels in agricultural products (cauliflower, radish, pear, muskmelon), the recoveries ranged from 82.5% to 123.0% with relative standard deviations lower than 8.24%. The developed method was sensitive, convenient and efficient. More importantly, this study could provide a promising strategy for designing new adsorbents with extremely fast mass transfer rate for other potential trace contaminants.

Preparation of metal-organic framework @molecularly imprinted polymers for extracting strobilurin fungicides from agricultural products.

The core-shell metal-organic framework coated with molecularly imprinted polymers (ZIF-8@MIPs) were successfully synthesized by surface imprinting technique, and applied as adsorbents for solid-phase extraction of strobilurin fungicides. The obtained hybrid complex was characterized in detail, and their adsorbing and recognition performance were evaluated. The results showed that ZIF-8@MIPs presented typically core-shell structure with MIP shell (about 20 nm), and exhibited larger adsorption capacity (102.5 mg g-1) and fast adsorption ability (only 5 min). Under the optimized conditions, a sensitive, efficient and reliable method for determining six strobilurin fungicides in different agricultural products based on ZIF-8@MIPs coupling with high performance liquid chromatography-tandem mass spectrometry was established. This method showed good linearity with correlation coefficients higher than 0.9990. With spiked at three different concentration levels in agricultural products (apple, pear, banana, Chinese cabbage, cabbage, cucumber), the good recoveries (83.5-129.0%) with relative standard deviations from 0.5 to 10.2% were obtained. The limit of detections and the limit of quantifications were 0.01-1.12 ng g-1 and 0.03-3.73 ng g-1, respectively. Those results demonstrated good potential application of ZIF-8@MIPs for enriching and separating trace strobilurin fungicides in agricultural samples.

Novel Fe3O4@metal-organic framework@polymer core-shell-shell nanospheres for fast extraction and specific preconcentration of nine organophosphorus pesticides from complex matrices.

Herein, a novel core-shell-shell magnetic nanosphere denoted as Fe3O4@ZIF-8@polymer was fabricated by sequential in situ self-assembly and precipitation polymerization for effective magnetic solid-phase extraction of nine organophosphorus pesticides (OPPs) from river water, pear, and cabbage samples. The integrated Fe3O4@ZIF-8@polymer featured convenient magnetic separation property and excellent multi-target binding ability. More importantly, the functional polymer coating greatly improved the extraction performance of Fe3O4@ZIF-8 for OPPs, thus facilitating the simultaneous determination of trace OPP residues in real samples. The developed MPSE-LC-MS/MS method exhibited good linearity (R2 ≥ 0.9991) over the concentration range of 0.2-200 µg L-1, low limits of detection of 0.0002-0.005 µg L-1 for river water and 0.006-0.185 µg kg-1 for pear and cabbage, satisfactory precision with relative standard deviations ≤ 9.7% and accuracy with recoveries of 69.5-94.3%. These results highlight that the combination of polymers with MOFs has great potential to fabricate excellent adsorbents for high-throughput analysis of various contaminants in complex matrices.

Preparation of molecularly imprinted polymer with class-specific recognition for determination of 29 sulfonylurea herbicides in agro-products.

Molecularly imprinting polymers with high selectivity toward 29 sulfonylurea herbicides were synthesized by precipitation polymerization, using metsulfuron-methyl and chlorsulfuron as the template molecule, 4-vinylpyridine as the function monomer, divinylbenzene as the crosslinking agent, and acetonitrile as porogen. The imprinted polymers were characterized and measured by scanning electron microscopy (SEM) and equilibrium adsorption experiments. The molecularly imprinted polymers displayed specific recognition for the tested 29 sulfonylurea herbicides, and the maximum apparent binding capacity was found to be 18.81 mg/g. The synthesized polymer was used as a solid-phase extraction (SPE) column coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS) for determination of the tested analytes in agro-products. Within the range of 2-100 µg/L, the tested analytes have achieved a good linear association with correlation coefficient (R2) > 0.999. The calculated limits of detection (LODs, S/N=3) as along with limits of quantification (LOQs, S/N=10) were in the ranges of 0.005-0.07 µg/L and 0.018-0.23 µg/L, respectively. Under different spiking levels, the recovery rates were ranged from 74.8% - 110.5%, and the relative standard deviation (RSDs) were < 5.3%. Finally, the feasibility of the proposed methodology was successfully applied for detection of sulfonylurea herbicides in crops, vegetables, and oils samples.

Preparation of core-shell magnetic molecularly imprinted polymers for extraction of patulin from juice samples.

In this study, a novel magnetic molecularly imprinted polymer (MMIP) was prepared by surface imprinting technology using 2-oxin and 6-HNA as dual virtual templates and 4-vinyl pyridine (4-VP) as the functional monomer for extraction of patulin (PAT) from the surface of magnetic nanoparticles. MMIPs were characterized by fourier transformed infrared (FT-IR) spectroscopy, X-ray diffraction, and vibrating sample magnetometry. The results showed that the molecularly imprinted polymer (MIP) was successfully coupled with magnetic nanoparticles and could be used as a magnetic selective recognition material. Moreover, MMIPs have a greater adsorption capacity for PAT than conventional MIPs. The magnetic dispersion solid-phase extraction procedure was optimized and then combined with liquid chromatography-tandem mass spectrometry (MDSPE-LC-MS/MS) for detection of PAT in juice samples. The method showed excellent analytical performance in terms of linearity (ranged between 0.5 µg L-1 and 100 µg L-1with correlation coefficients (r) higher than 0.999) and limit of detection (LOD) (0.1 µg L-1, S/N = 3). At three spiking concentrations (1, 10, and 50 µg L-1), the mean recoveries were ranged between 79.4% and 97.9% with relative standard deviations (RSDs) < 4.7% (n = 3).