RESUMO
To mimic the natural structure of tissue extracellular matrix, a novel silk fibroin (SF)/hyaluronic acid (HA)/sodium alginate (SA) composite scaffold (92% in porosity) was prepared by freeze-drying. Fourier-transform infrared spectroscopy and Raman spectra indicated interactions among SF, HA, and SA molecules. Scanning electron microscopy showed that the prepared SF/HA/SA scaffold had soft, elastic characteristics, with an average pore diameter of 93⯵m. Mechanical property, thermogravimetric analyses and degradation results indicated that the SF/HA/SA scaffold had good physical stability in body fluid and mechanical movement-related environments. Cell proliferation, morphological, and live-dead analyses showed that NIH-3T3 fibroblast cells were better able to attach, grow, and proliferate on the SF/HA/SA scaffold compared with SF, SF/HA, and SF/SA scaffolds. We evaluated the wound healing effects in a rat full-thickness burn model. The hematoxylin-eosin (H&E) and Masson's trichrome staining results from SF/HA/SA scaffold showed that improved re-epithelialization, enhanced extracellular matrix remodeling. Our findings showed that the prepared SF/HA/SA scaffold can provide a potential way as a wound dressing for skin repair.
Assuntos
Alginatos/química , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Fibroínas/química , Fibroínas/farmacologia , Ácido Hialurônico/química , Pele/efeitos dos fármacos , Animais , Materiais Biocompatíveis/toxicidade , Fibroínas/toxicidade , Interações Hidrofóbicas e Hidrofílicas , Masculino , Teste de Materiais , Fenômenos Mecânicos , Camundongos , Células NIH 3T3 , Ratos , Pele/citologia , Fenômenos Fisiológicos da Pele/efeitos dos fármacos , Alicerces Teciduais/química , Cicatrização/efeitos dos fármacosRESUMO
Inspired from the sophisticated bilayer structures of natural dermis, here, we reported collagen/chitosan based two-compartment and bi-functional dermal scaffolds. Two functions refer to mediating rapid angiogenesis based on recombinant human vascular endothelial growth factor (rhVEGF) and antibacterial from gentamicin, which were encapsulated in PLGA microspheres. The gentamicin and rhVEGF encapsulated PLGA microspheres were further combined with collagen/chitosan mixtures in low (lower layer) and high (upper layer) concentrations, and molded to generate the two-compartment and bi-functional scaffolds. Based on morphology and pore structure analyses, it was found that the scaffold has a distinct double layered porous and connective structure with PLGA microspheres encapsulated. Statistical analysis indicated that the pores in the upper layer and in the lower layer have great variations in diameter, indicative of a two-compartment structure. The release profiles of gentamicin and rhVEGF exceeded 28 and 49 days, respectively. In vitro culture of mouse fibroblasts showed that the scaffold can facilitate cell adhesion and proliferation. Moreover, the scaffold can obviously inhibit proliferation of Staphylococcus aureus and Serratia marcescens, exhibiting its unique antibacterial effect. The two-compartment and bi-functional dermal scaffolds can be a promising candidate for skin regeneration.
Assuntos
Engenharia Tecidual/métodos , Alicerces Teciduais/química , Animais , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Linhagem Celular , Proliferação de Células/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Quitosana , Colágeno , Fibroblastos/citologia , Fibroblastos/efeitos dos fármacos , Humanos , Camundongos , Microesferas , Ácido Poliglicólico/química , Serratia marcescens/efeitos dos fármacos , Pele Artificial , Staphylococcus aureus/efeitos dos fármacos , Fator A de Crescimento do Endotélio Vascular/químicaRESUMO
A cylindrical standing wave ultrasonic motor using bending vibration transducer was proposed in this paper. The proposed stator contains a cylinder and a bending vibration transducer. The two combining sites between the cylinder and the transducer locate at the adjacent wave loops of bending vibration of the transducer and have a distance that equal to the half wave length of bending standing wave excited in the cylinder. Thus, the bending mode of the cylinder can be excited by the bending vibration of the transducer. Two circular cone type rotors are pressed in contact to the end rims of the teeth, and the preload between the rotors and stator is accomplished by a spring and nut system. The working principle of the proposed motor was analyzed. The motion trajectories of teeth were deduced. The stator was designed and analyzed with FEM. A prototype motor was fabricated and measured. Typical output of the prototype is no-load speed of 165rpm and maximum torque of 0.45Nm at an exciting voltage of 200V(rms).
Assuntos
Sistemas Microeletromecânicos/instrumentação , Transdutores , Ultrassom/instrumentação , Desenho de Equipamento , Análise de Falha de Equipamento , Movimento (Física) , VibraçãoRESUMO
BACKGROUND: Ultrasonic motors (USM) are based on the concept of driving the rotor by a mechanical vibration excited on the stator via piezoelectric effect. USM exhibit merits such as simple structure, quick response, quiet operation, self-locking when power off, nonelectromagnetic radiation and higher position accuracy. PRINCIPAL FINDINGS: A cylindrical type traveling wave ultrasonic motor using cantilever type composite transducer was proposed in this paper. There are two cantilevers on the outside surface of cylinder, four longitudinal PZT ceramics are set between the cantilevers, and four bending PZT ceramics are set on each outside surface of cantilevers. Two degenerate flexural vibration modes spatially and temporally orthogonal to each other in the cylinder are excited by the composite transducer. In this new design, a single transducer can excite a flexural traveling wave in the cylinder. Thus, elliptical motions are achieved on the teeth. The actuating mechanism of proposed motor was analyzed. The stator was designed with FEM. The two vibration modes of stator were degenerated. Transient analysis was developed to gain the vibration characteristic of stator, and results indicate the motion trajectories of nodes on the teeth are nearly ellipses. CONCLUSIONS: The study results verify the feasibility of the proposed design. The wave excited in the cylinder isn't an ideal traveling wave, and the vibration amplitudes are inconsistent. The distortion of traveling wave is generated by the deformation of bending vibration mode of cylinder, which is caused by the coupling effect between the cylinder and transducer. Analysis results also prove that the objective motions of nodes on the teeth are three-dimensional vibrations. But, the vibration in axial direction is minute compared with the vibrations in circumferential and radial direction. The results of this paper can guide the development of this new type of motor.