Is Surgical Treatment Based on a 1-Step or 2-Step Protocol Effective in Managing the Odontogenic Keratocyst?

PURPOSE: The literature does not present any consensus on a uniform treatment plan for odontogenic keratocysts (OKCs) and does not provide adequate evidence for determining which modality is most effective in lowering morbidity or preventing recurrence. The purpose of this study was to compare the effectiveness of surgical treatment based on a 1- versus 2-step protocol. MATERIALS AND METHODS: The authors designed and implemented a retrospective cohort study and enrolled a sample of patients diagnosed with OKC from 1991 through 2018. The medical records of all cases were retrieved from files of the Oral and Maxillofacial Surgery Division of the Piracicaba Dental School (Piracicaba, Brazil). The predictor variable was treatment group (1- vs 2-step protocol). Statistical analysis was performed using Kaplan-Meier analysis, Mantel-Cox log-rank test, and proportional hazard regression analysis. RESULTS: The sample was composed of 72 patients (38 male) with a mean age of 40.72 years. Thirteen patients received 1-step treatment and 59 received 2-step treatment. The complex composed of the body, angle, and mandibular ramus was the site most frequently affected. In the individual Kaplan-Meier analysis for each presented variable only involved tooth was significant (P = .0128 by log-rank test), with the risk of relapse 4.23 times higher for the involved tooth than for the non-involved tooth. CONCLUSION: The 1- and 2-step protocols for treatment of OKCs are safe and appropriate as the first treatment option, offering a conservative and effective option with low morbidity. Treatment protocols associated with systematic monitoring promote a better quality of life for patients with low potential for complications.

Condylar Hyperplasia in a Monozygotic Twin Girl: An Argument About Etiology.

The diagnosis of unilateral condylar hyperplasia (UCH) requires a combined assessment consisting of clinical, radiological, and histopathological examination. The etiology of this condition is unknown. The purpose of this study is to report a rare case of UCH in a monozygotic twin. A 15-year-old girl was referred to our department complaining of facial asymmetry and malocclusion. Computed tomography and single-photon emission computed tomography imaging reveal enlargement of the left condyle and condylar neck, and an increased uptake that was diagnosed as active UCH. During the investigation of family and co-twin facial profile, no cases of UCH were identified. From the case reported in this study, the authors raise a hypothesis that can exist some environmental factor that is related in the development of condylar hyperplasia given the occurrence of this disease in one of twins.

Evaluation of ortogonblender software bone movement tools in bimaxillary orthognatic surgeries performed in dolphin software.

The aim of this observational, longitudinal and retrospective study was to evaluate the fidelity of virtual surgical planning (VSP) performed on Dolphin Imaging & Management Solutions® 11.95 software on hard tissues, using the tools of the open-source software OrtogOnBlender - Blender3D. For this, linear, angular and 7-point anatomical measurements of the skeletal profile were used, and the discrepancies between the VSP and the result after bimaxillary orthognathic surgery were calculated. Pre- and postoperative cone beam CT (CBCT) scans of 43 consecutive patients with class II and III skeletal deformities were evaluated and the results of the VSP were compared to the 1-month postoperative results. All overlapping points presented values within the range considered clinically irrelevant (< 2 mm and < 4°) and differences were not significant (p > 0.05). The comparison of anatomical points showed lower values (≤ 2.11 mm) in point A of class II. For hard tissues, the comparison between VSP and 1-month postoperative tomography demonstrated the faithful results of virtual planning using this software.

Comparative evaluation of different fixation techniques for sagittal split ramus osteotomy in 10 mm advancements. Part two: Finite element analysis.

PURPOSE: To evaluate three rigid, stable fixation methods for sagittal split ramus osteotomy (SSRO), using finite element analysis. The hypothesis is that a customized miniplate presents better stress concentration and distribution. MATERIALS AND METHODS: A 3D model of a hemimandible was created, and a 10-mm-advancement SSRO was simulated and fixed as follows: 3-DCP group - one custom miniplate fixed by eight screws; 4-H2P group - two miniplates of four holes each, fixed by eight screws; and 6-H2P group - two miniplates of six holes each fixed by 12 screws. After a vertical loading of 100 N, the values for von Mises stress, modified von Mises stress, and maximum and minimum principal stresses were measured. RESULTS: The area of maximum principal stress was similar for the three groups - located in the upper miniplate, in the screw near the proximal segment osteotomy. The maximum von Mises stresses were 1580.4 MPa, 1005 MPa, and 977.56 MPa for the 3DCP, 4-H2P, and 6-H2P groups, respectively, showing an allowable displacement of 2.57 mm, 1.62 mm, and 1.52 mm for the 3DCP, 4-H2P, and 6-H2P groups, respectively. CONCLUSION: The customized miniplate did not present better stress distribution than two commonly used types of fixation. Fixation with two straight miniplates, either with four or six holes, offers adequate resistance for 10 mm linear advancements.

Comparative evaluation of different fixation techniques of the sagittal split ramus osteotomy in 10 mm advancements: Mechanical testing and screw insertion torque.

PURPOSE: To compare the mechanical characteristics of five techniques for the functionally stable fixation of simulated sagittal split ramus osteotomy with 10 mm of advancement and to evaluate the screw insertion torque. MATERIALS AND METHODS: Fifty polyurethane hemimandibles with sagittal split ramus osteotomy and containing an advancement of 10 mm fixed and distributed as follows: Customized 3D Plate Group: 1 customized 3D miniplate; 4-Hole Plate Group: 2 miniplates with 4 holes; 6-Hole Plate Group: 2 miniplates with 6 holes; Hybrid Group: 1 flat miniplate with 4 holes and 1 bicortical screw; and Bicortical Screw Group: 3 bicortical screws. We conducted a mechanical test using vertical linear loading with a displacement velocity of 1 mm/min on a universal testing machine and assessed the screw insertion torque using a digital torque wrench. RESULTS: The means of strength for the 1-, 3- and 5-mm displacements were determined by a one-way analysis of variance (ANOVA) followed by the post hoc Tukey test. Statistically significant differences were observed only for the 5-mm displacement (F = 3.36; p = 0.01). There was a difference between the 4-H2P and HG groups (p = 0.04). CONCLUSION: The customized miniplate, the fixation methods with three bicortical screws, or with two straight miniplates with either 4 or 6 holes, all offer a similar mechanical resistance suitable for fixation.

Piezosurgery in Bone Augmentation Procedures Previous to Dental Implant Surgery: A Review of the Literature.

The piezosurgery has been used with increasing frequency and applicability by health professionals, especially those who deal with dental implants. The concept of piezoelectricity has emerged in the nineteenth century, but it was applied in oral surgery from 1988 by Tomaso Vercellotti. It consists of an ultrasonic device able to cut mineralized bone tissue, without injuring the adjacent soft tissue. It also has several advantages when compared to conventional techniques with drills and saws, such as the production of a precise, clean and low bleed bone cut that shows positive biological results. In dental implants surgery, it has been used for maxillary sinus lifting, removal of bone blocks, distraction osteogenesis, lateralization of the inferior alveolar nerve, split crest of alveolar ridge and even for dental implants placement. The purpose of this paper is to discuss the use of piezosurgery in bone augmentation procedures used previously to dental implants placement.

Prevalence of facial trauma in contact sports practitioners in the Federal District of Brazil

Abstract Aims: The purpose of this study is to assess the prevalence of oral and dentoalveolar trauma among contact sports practitioners in the Federal District of Brazil. Methods: A cross-sectional descriptive study was conducted using a questionnaire developed specifically for this research regarding the occurrence of facial trauma, site of injuries, how they occurred, the approach is taken to solve the problem, and the use of several types of mouthguards. Data were analyzed using the SPSS 20.0 software, and the chi-square test (X2) was chosen to examine the differences between categorical variables. The results were considered statistically significant for p<0.05. Results: A total of 141 athletes were interviewed, with a prevalence of facial trauma of 65.2%, which was higher in professional athletes (71.1%). Lesions ranged from soft tissue lacerations to combined trauma; and the most frequent injuries were soft tissue laceration (53.3%), combined trauma (16.3%), and dental fracture (9.8%). Only 20.6% of the participants required treatment for related injuries. Regarding the use of mouthguards, 34% of the athletes reported regular use of this device, and Type II mouthguard was the most used (39.7%). Dentists participate in the process of production and dissemination of mouthguards in 17.1% and 10.5% of cases, respectively. Conclusion: The data showed that most athletes are not aware of the importance of using mouthguards. The dentist must be more present in the area of sports dentistry, both for awareness and production of these devices, which support the safe practice of contact sports.

COVID-19 y la odontología: una revisión de las recomendaciones y perspectivas para Latinoamérica / COVID-19 and dentistry: a review of recommendations and perspectives for Latin America

COVID-19 es una enfermedad altamente contagiosa y potencialmente mortal que nos acompañara por largo tiempo. Las profesiones de la salud y la vida en general ha sido afectada de forma significativa en todo lugar del mundo. La odontología ha pasado de una etapa de gran desarrollo clínico a una etapa donde el manejo de barrera de protección, el control de tratamientos y el tiempo asignado a los pacientes cambiará la forma de realizar la profesión. El presente trabajo pretende resumir las indicaciones y recomendaciones basadas en la evidencia disponible y realizar un análisis de la condiciones de salud oral para Latinoamérica en esta época de pandemia.

COVID-19 is a profound, highly contagious and life-threatening viral disease that will be with us for a long time. Health Care-related professions and life in its entirety are significantly, and perhaps irreversibly affected, all around the World. COVID-19 is and will continue to transform Dentistry and its practise. Based on the available evidence accrued to date, this work attempts to address such changes, current and anticipated, as well as present recommendations for clinical practise implementation, tailored for Latin/South America, in light of such lifealtering momentous pandemic.

Strategies and operational procedures in oral radiology to mitigate potential SARS-CoV-2 transmission / Estrategias y procedimientos operacionales en Radiología Oral para mitigar transmisión de SARS-CoV-2

SUMMARY Coronavirus disease (COVID-19) is highly transmissible through respiratory droplets, saliva, and aerosol particles. Infection can lead to severe acute respiratory syndrome and trigger multi-organ failure and death. Most clinical dental procedures involve contact with saliva or the generation of aerosols with saliva and blood. These airborne particles increase the risk of transmission by COVID-19 between dentists and patients. Thus, dentistry must adopt procedures to reduce transmission during dental procedures. Although these strategies may not be directly applicable to all institutions due to cultural, social, geographical, and economic differences, the underlying principles and implemented strategies remain relevant and can be adopted or modified by the institutions dealing with the current COVID-19 outbreak. The purpose of this article is to discuss one of the principal sources of COVID-19 transmission: saliva, the biofluid most frequently handled in a radiology environment. The authors also recommend strategies and operational procedures to decrease the spread of COVID-19 in a radiological routine.

RESUMEN La enfermedad por coronavirus (COVID-19) se transmite fácilmente a través de gotitas respiratorias, saliva y partículas de aerosol. La infección puede desencadenar un síndrome respiratorio agudo severo, insuficiencia multiorgánica y, en algunos casos, la muerte. Los procedimientos clínicos dentales determinan el contacto con saliva o la generación de aerosoles con saliva y sangre, lo que implica un alto riesgo de transmisión por COVID-19 entre odontólogos y pacientes. Por ello, la práctica odontologica debe adoptar medidas para detener la propagación durante los procedimientos dentales. En este artículo se revisan las estrategias para mitigar el riesgo de transmisión de COVID-19. Si bien estas estrategias pueden no ser directamente aplicables a todas las instituciones debido a diferencias culturales, sociales, geográficas y económicas inherentes, los principios subyacentes y las estrategias implementadas siguen siendo relevantes y pueden ser adoptados o modificados por las instituciones que se ocupan del brote actual de COVID-19. El propósito de este artículo es discutir una de las principales fuentes de transmisión de COVID-19: la saliva, el biofluido que se maneja con mayor frecuencia en un entorno radiológico. Los autores también recomiendan estrategias y procedimientos operativos para disminuir la propagación de COVID-19 en una rutina radiológica.

Effect of alendronate on healing of bone defect and gingival tissue in osteopenic rats / Efecto del alendronato en la reparación de defectos óseos y tejido gingival en ratas con osteopenia

The aim was to evaluate bone repair and gingival tissue repair in osteopenic rats. Fifteen female wistar rats were included; in all of them ovariectomy was realized to induce osteopenia; after 45 days, the animals were submitted to 2 surgical techinques 1) dental extraction of the upper central incisor with no socket preservation and 2) 5 mm cranial defect in the calvarium; 5 rats were included in the control group (G1) withput alendronate application; in the group 2 (G2) was used subcutenous alendronate (0.5 mg/kg) once for three weeks and then was realizd the both surgical techniques. In group 3 (G3), after ovariectomy was realized the both dental extraction and the calvarium defect and after that was realized the alendronate protocol. In each group, after six week was realized euthanasia and descriptive histological analysis of the surgical areas involved. In bone formation of the 5 mm cranial defect was observed with good progression in the 3 experimental models and no modification in quality of bone repair was observed. For the gingival tissue in the extraction socket, no differences were observed between G1 and G3. On other hand, in G2 a thinner and reduced gingival epithelium was found. Our results showed that alendronate was not an obstacle for bone repair; deficiencies in re-epithelialization of oral mucosa show the impact of alendronate before dental extraction.

El objetivo fue evaluar la reparación ósea y gingival en ratas con osteopenia. Quince ratas wistar hembras fueron incluidas; en todas ellas se realizo ovarectomia y fue realizada la inducción de osteopenia; después de 45 días, los animales fueron sometidos a dos técnicas quirúrgicas 1) extracciones dentales del incisivo central superior sin preservación alveolar y 2) creación de un defecto craneano de 5 mm en la calota; 5 animales fueron incluidos como grupo control (G1) sin la aplicación de alendronato; en el grupo 2 (G2) se utilizó alendronato subcutáneo (0,5 mg/kg) una vez a la semana durante 3 semanas. En el grupo 3 (G3), después de la ovarectomia se realizó la exodoncia y el defecto en el cráneo y después de ello se inicio el protocolo con alendronato. En cada grupo, después de seis semanas se realizó la eutanasia con descripción histológica de los hallazgos. En el hueso formado en el defecto craneano de 5 mm se observó una adecuada progresión de reparación en los 3 modelos experimentales y no se observó cambios importantes en el modelo de reparación. Para el tejido gingival en el sitio de extracción, no se observaron diferencias entre el grupo G1 y G3. Por otra parte, el G2 presentó un tejido mas delgado con reducción del epitelio gingival; nuestros resultados demuestran que el alendronato no fue un obstáculo en la reparación ósea; deficiencias en la re epitelización de la mucosa oral muestran el impacto del alendronato después de la exodoncia.

Photoelastic analysis of fixed partial prosthesis crown height and implant length on distribution of stress in two dental implant systems.

The aim of this study was to evaluate by photoelastic analysis stress distribution on short and long implants of two dental implant systems with 2-unit implant-supported fixed partial prostheses of 8 mm and 13 mm heights. Sixteen photoelastic models were divided into 4 groups: I: long implant (5 × 11 mm) (Neodent), II: long implant (5 × 11 mm) (Bicon), III: short implant (5 × 6 mm) (Neodent), and IV: short implants (5 × 6 mm) (Bicon). The models were positioned in a circular polariscope associated with a cell load and static axial (0.5 Kgf) and nonaxial load (15°, 0.5 Kgf) were applied to each group for both prosthetic crown heights. Three-way ANOVA was used to compare the factors implant length, crown height, and implant system (α = 0.05). The results showed that implant length was a statistically significant factor for both axial and nonaxial loading. The 13 mm prosthetic crown did not result in statistically significant differences in stress distribution between the implant systems and implant lengths studied, regardless of load type (P > 0.05). It can be concluded that short implants showed higher stress levels than long implants. Implant system and length was not relevant factors when prosthetic crown height were increased.

Bisphosphonate-related osteonecrosis of the jaw: a review of the literature.

Bisphosphonates (BPs) are a class of drugs used to treat osteoporosis and malignant bone metastasis. BPs show high binding capacity to the bone matrix, especially in sites of active bone metabolism. The American Society for Bone and Mineral Research defines BRONJ as "an area of exposed bone in the maxillofacial region that has not healed within 8 weeks after identification by a healthcare provider in a patient who is receiving or has been exposed to a bisphosphonate and has not had radiation therapy to the craniofacial region." Bisphosphonate-related osteonecrosis of the jaw (BRONJ) can adversely affect quality of life, as it may produce significant morbidity. The American Association of Oral and Maxillofacial Surgeons (AAOMS) considers as vitally important that information on BRONJ be disseminated to other dental and medical specialties. The purpose of this work is to offer a perspective on how dentists should manage patients on BPs, to show the benefits of accurately diagnosing BRONJ, and to present diagnostic aids and treatments strategies for the condition.

Análisis Descriptivo y Cualitativo de Tres Software Gratuitos Usados para la Conversión de Formato DICOM para STL / Descriptive and Qualitative Analysis of Three Free Software Used to Convert From DICOM to STL Format

RESUMEN: Los exámenes imagenológicos tridimensionales en odontología son cada día mas frecuentes, contando también con algunas tecnologías gratuitas; el objetivo de este estudio fue analizar tres software gratuitos de conversión desde el formato DICOM al STL. Se evaluaron los programas computacionales 3DSlicer, InVesalius e ImageVis3D. La metodología empleada para evaluar fue basada en el modelo del proceso de evaluación de calidad, según la norma NBR ISO / IEC 9126-, incluyendo 6 observadores en la investigación. Se determinó que el programa más fácil de manipular en la etapa de segmentación, en la representación de volumen y en la conversión de archivos STL fue InVesalius, pero el programa más completo y preciso, para estas fases fue el software 3DSlider. Se puede concluir es necesario un entrenamiento adecuado para que la manipulación de estos programas sea lo más preciso posible.

ABSTRACT: The three-dimensional imaging in medical sciences nowadays is increasing and some of these technologies are free; the aim of this study was to analyze three free conversion software: 3DSlicer, InVesalius and ImageVis3D. The methodology used to evaluate the software was based on the model of the quality evaluation process, according to the standard NBR ISO/IEC 9126-1. It was observed that the easiest software to manipulate in the segmentation stage, in the representation of volume and in the conversion of STL (Standard Tessellation Language) files was InVesalius, but the most complete and precise software for these phases was the 3DSlider software. Thus, it was concluded that adequate training is necessary so that the handling of these three software is as accurate as possible.

Aumento Gingival en Base a Ácido Hialurónico en Defectos Perimplantares y Periodontales. Análisis de una Serie de Casos / Gingival Increase Based on Hyaluronic Acid in Peri Implant and Periodontal Defects. A Case Series Analysis

RESUMEN: El ácido hialurónico ha sido empleado en diferentes áreas anatómicas, su aplicación para el rejuvenecimiento facial y en las lesiones de la articulación son conocidos; sin embargo, la aplicación en defectos periodontales y perimplantares tiene limitada información. El objetivo de esta investigación es mostrar los resultados clínicos de una serie de casos de sujetos con defectos periodontales menores tratados con la aplicación de ácido hialurónico. Se incluyeron 4 sujetos que presentaron espacios negros y recesiones gingivales en los que se aplicó el protocolo de instalación de ácido hialurónico al 0,2 % en diferentes momentos; el seguimiento clínico demostró eficiencia en la recuperación estética y estabilidad en los aumentos. Es posible concluir que esta técnica mínimamente invasiva es promisoria para tratar defectos periodontales y perimplantares menores.

ABSTRACT: Hyaluronic acid has been used in different anatomical areas, where its application and use for facial rejuvenation as well as joint injuries are known. However, information of its application in periodontal and peri implant defects is limited. The aim of this research is to show the clinical results of a case series in subjects with minor periodontal defects treated with the application of hyaluronic acid. Four subjects with black spaces and gingival recessions were included; the protocol for application of 0.2% hyaluronic acid was realized at different times; the clinical follow-up showed efficiency in the aesthetic recovery and stability in the increases. It is possible to conclude that this minimally invasive technique is promising to treat minor periodontal and peri implant defects.

Quality of life of patients with facial prosthesis / Calidad de vida de los pacientes portadores de prótesis faciales

ABSTRACT. Objective: evaluate the quality of life and self-esteem of patients with facial deformities in the nasal, oculo-palpebral, and auricular areas using bucco-maxillofacial prostheses. Methods: descriptive study in users of facial prostheses who were rehabilitated at the dental clinic of the University Hospital of Brasilia in the period 2004-2011. The average age of patients was 63.8 years. The data collection instruments were the SF-36 questionnaire and a survey containing the Rosenberg Self-Esteem/EPM scale. Results: skin cancer was the predominant etiologic factor (n = 4). Most patients think that their deformity is visible to some degree (n = 4) and for three of them this fact impacts negatively the frequency to visit public places. The self-esteem scale yielded an average score of 4.6. In evaluating the quality of life by means of the SF-36 questionnaire, there were scores like pain (46.67) and emotional aspects (33.33). Conclusion: the results demonstrate the importance of conducting systematic followups to these patients. Most surveyed patients experienced an increase in quality of life, as well as a higher self-esteem, which can be explained by the functionality and aesthetics offered by the prosthesis. This study is part of an assessment program conducted with the intention of structuring multidisciplinary rehabilitation programs.

RESUMEN. Objetivo: evaluar la calidad de vida y la autoestima de los pacientes con deformidades faciales en la zona nasal, la zona óculopalpebral y la región auricular, portadores de prótesis bucomaxilofaciales. Métodos: estudio descriptivo en pacientes usuarios de prótesis faciales, los cuales fueron rehabilitados en la clínica odontológica del Hospital Universitario de Brasilia en el periodo 2004-2011. La edad media de los pacientes evaluados fue de 63,8 años. Como instrumentos de recolección de datos, en esta investigación se utilizaron el cuestionario SF-36 y una encuesta que contenía la Escala Visual de Autoestima de Rosenberg ̸EPM. Resultados: el cáncer de piel fue el factor etiológico predominante (n = 4). La mayoría de los pacientes consideró que su deformidad es visible en algún grado (n = 4), y para tres de ellos este hecho interfiere negativamente en la frecuencia de visitas a sitios públicos. En la escala de autoestima se obtuvo una puntuación media de 4,6. En la evaluación de la calidad de vida utilizando el cuestionario SF-36 se obtuvieron valores como dolor (46,67) y aspectos emocionales (33,33). Conclusión: los resultados demuestran la importancia de hacer un seguimiento sistemático a estos pacientes. En la mayoría de los pacientes encuestados se identificó un aumento en la calidad de vida, así como una mayor autoestima, lo cual puede explicarse por la funcionalidad y estética desempeñada por la prótesis. Esta es una propuesta de evaluación que se llevó a cabo con el fin de estructurar programas de rehabilitación multidisciplinar.

Mesiodens: a case report / Mesiodens: reporte de caso

ABSTRACT Mesiodens are supernumerary teeth, commonly seen in the maxillary midline. Given their high frequency, dentist should be aware of the signs and symptoms of mesiodens and their appropriate treatment. This case report describes an 8-year-old girl with a radiographic image suggesting two unerupted mesiodens between the central incisors on the palate. The intraoral examination showed swelling in the anterior palatal region with no mucosa alteration. The supernumerary teeth were diagnosed by periapical radiograph and computed tomography. The objective of this study is to present the clinical importance and use of diagnostic images, such as periapical radiograph (Clark technique) or tomography.

RESUMEN. Un mesiodens es un diente supernumerario que comúnmente se presenta en la línea media maxilar. Dada la frecuencia con la que se presenta, el odontólogo general debe estar bien informado acerca de los signos y síntomas del mesiodens y del tratamiento adecuado. Este artículo relata el caso de una paciente de 8 años de edad, en cuyo examen radiográfico se observa una imagen sugestiva de dos mesiodens no erupcionados entre los incisivos centrales superiores. En la valoración intraoral se encontró una inflamación en la región palatina anterior, sin ninguna alteración en la mucosa. Los dientes supernumerarios se diagnostican mediante radiografía y tomografía computarizada. El objetivo de este trabajo es presentar la importancia clínica observada y la utilización de imágenes auxiliares para el diagnóstico, como la radiografía periapical (técnica de Clark) o la tomografía computarizada.

Pain control in third molar surgery / Control del dolor en cirugía de tercer molar

The sensation of pain at the surgical site may be increased and persist for long periods after the noxious stimulus has been removed. Post-operative pain from the extraction of impacted molar may cause serious discomfort to the patient resulting in considered moderate to severe in intensity. Analgesia for this surgical procedure is related to the use of nonsteroidal anti-inflammatory drugs, steroids, analgesics of central and peripheral actions used in combination or individually. The aim of this review is to show an update about the use and the physiological bases for indications of the analgesic therapy in third molar surgery.

La sensación de dolor en el sitio quirúrgico puede ser mayor y persistente por largos periodos de tiempo después de que el estímulo nocivo ha sido retirado. El dolor postoperatorio desde la extracción de un molar impactado puede causar molestias moderadas o severas en intensidad. La analgesia para estos procedimientos son relacionadas con el uso de fármacos antiinflamatorios no esteroidales, esteroides, analgésicos de acción central y periféricos utilizados en combinación o individualmente. El objetivo de esta revisión es mostrar una puesta al día en el uso y las bases fisiológicas para la indicación de terapia analgésica en cirugía de tercer molar.

Trauma dentário como fator de inversão na erupção dentária e dilaceração radicular – relato de caso / Dental trauma as an inversion factor in tooth eruption and root laceration – case report

O objetivo do presente trabalho foi relatar um caso clínico de dilaceração e inversão dentária após trauma dentário. Nos primeiros estágios de desenvolvimento, o germe do incisivo superior permanente se encontra situado palatalmente e superiormente ao ápice do incisivo central decíduo. Gradualmente, o sucessor permanente muda em direção labial. Nesse momento a coroa do dente permanente avizinha da raiz do sucessor, iniciando o processo de reabsorção do dente decíduo. Por razões desta estreita relação entre o germe do dente permanente e o ápice do incisivo decíduo, acredita-se que um trauma agudo ao antecessor decíduo pode causar a dilaceração do eixo longitudinal do sucessor permanente. Clinicamente, a dilaceração pode ser revelada por meio de palpação alta no sulco labial e/ou no palato duro, enquanto que o exame radiográfico é característico e decisivo para o diagnóstico. A abordagem terapêutica de incisivo central superior tem de ser cuidadosamente planejada e precisa da cooperação de várias especialidades para alcançar o objetivo. A extração do incisivo dilacerado é uma prática comum, mas compromete o paciente com um extenso tratamento reabilitador no futuro...

The objective of this study was to present a case report of a dilacerated and inverted tooth after dental trauma. In the early stages of development, the germ of the permanent incisor is situated palatally and above the apex of the deciduous central incisor. Gradually the permanent successor changes in labial direction, at that time the permanent tooth crown approaches to the successor tooth root, starting the process of resorption in deciduous teeth. Due to this proximal relation between the germ of the permanent tooth and the apex of the deciduous incisors, it is believed that an acute trauma to the deciduous predecessor may cause dilaceration of the longitudinal axis of the permanent successor. Clinically, the dilaceration can be revealed by palpation in the labial sulcus and/or the hard palate, and radiographic examination is determinant for a final diagnosis. The treatment of the dilacerated central incisor has to be carefully planned and requires the cooperation of various specialties. The dilacerated incisor extraction is a common practice that may compromise patients’ life requiring an extensive rehabilitation treatment in the future...