Effects of root canal enlargement on unprepared areas and coronal dentine thickness of three-rooted maxillary first premolars with different root configurations: A stepwise micro-CT study.

AIM: To evaluate the effects of progressive root canal enlargements on the unprepared surface area and remaining dentine thickness of three-rooted maxillary first premolars with different root configurations. METHODOLOGY: Thirty three-rooted maxillary first premolars with three root configurations (n = 10) were selected and scanned in a micro-CT device. The root canals were sequentially enlarged with rotary instruments sizes 30.02 (step 1), 30.04 (step 2) and 30.06 (step 3). After each step, a new scan was taken. Analysed parameters included morphometric measurements (length, volume and surface area), number of static voxels and minimal dentine thickness. Statistical analyses were performed with one-way anova post hoc Tukey tests and paired sample t-test at a significance level of 5%. RESULTS: No statistical differences were observed amongst groups regarding the morphometric parameters and static voxels (p > .05). The minimal dentine thickness of the distobuccal root significantly changed depending on the root configuration (p < .05), whilst no differences were observed in the other roots (p > .05). A great variation in the position of the minimal dentine thickness was observed after preparation. Overall, mean percentage reduction in dentine thickness was higher in the buccal roots than in the palatal root (p < .05). In the mesiobuccal and distobuccal root, the number of slices with minimal dentine thickness lower than 0.05 mm increases 2 to 3 times and 3 to 4 times, respectively, from steps 1 to 3. CONCLUSIONS: Instruments sizes 30.02 and 30.04 can be safely and effectively used to enlarge the buccal and palatal canals of three-rooted maxillary first premolars.

Three-dimensional finite element analysis of endodontically treated teeth with weakened radicular walls restored with different protocols.

STATEMENT OF PROBLEM: The restoration of weakened roots with glass fiber posts (GFPs) remains a challenge. PURPOSE: The purpose of this study was to evaluate the stress distribution of endodontically treated teeth with weakened radicular walls restored with different protocols by 3-dimensional finite element analysis (3D-FEA). MATERIAL AND METHODS: The following 4 models of endodontically treated maxillary canines restored with metal ceramic crowns were simulated on the basis of computed microtomographic images to characterize the groups: GNW (control), a nonweakened root restored with a GFP; GW, a weakened root restored with a GFP; GDA, a weakened root restored with a direct anatomic GFP; and GIA, a weakened root restored with an indirect anatomic GFP. Loads of 180 N were applied to the lingual surface on the incisal third of the teeth at 45 degrees. The models were supported by a periodontal ligament and fixed in 3 axes (x=y=z=0). The von Mises stress (VMS) was calculated. RESULTS: All models exhibited VMS concentrations at the loading area and were distributed along the proximal surfaces of the root. The GFP exhibited a homogeneous stress distribution, and similar VMS distributions were observed in all of the reconstructive techniques. CONCLUSIONS: Similar stress distributions were observed in the endodontically treated teeth, regardless of root weakness and the reconstructive technique for the radicular walls.

Accuracy of Magnetic Resonance Imaging in Clinical Endodontic Applications: A Systematic Review.

INTRODUCTION: The development of dedicated coils and new magnetic resonance imaging (MRI) sequences has led to an increase in image resolution and a reduction in artifacts. Consequently, numerous studies have demonstrated the utility of MRI as a nonionizing alternative to cone-beam computed tomographic imaging. The aim of this systematic review was to evaluate the accuracy of MRI in clinical applications in endodontics. METHODS: A literature search was conducted using PubMed, Embase, Scopus, and Web of Science. The inclusion criteria encompassed studies evaluating MRI applications in endodontics, covering tooth and root canal anatomy, root canal working length, pulp vitality and regeneration, the effect of caries on dental pulp, guided endodontics, periapical lesions, and root cracks/fractures. The selected studies examined both ex vivo and in vivo human teeth using clinical MRI units. Two researchers independently screened the studies, applied the eligibility criteria, and assessed the potential risk of bias using the revised QUADAS-2 tool (Bristol Medical School, University of Bristol, UK). RESULTS: A total of 18 studies were included in this systematic review, demonstrating that the use of MRI has a high diagnostic value in endodontics. In the evaluation of tooth and root canal anatomy, pulp vitality and regeneration, the effect of caries on dental pulp, periapical lesions, and root cracks/fractures, MRI's accuracy is comparable to or even higher than reference standards such as cone-beam computed tomographic imaging, micro-computed tomographic imaging, and histology. CONCLUSIONS: MRI has high potential accuracy for diagnosing various clinical endodontic tasks, except for root canal length, size of caries, and periapical lesion dimensions, which are overestimated in MRI.

Use of platelet concentrates in oral surgery of patients with osteonecrosis: a scoping review.

The objective of this study was to map, through a scoping review, the evidence available in the literature on the use of platelet concentrates in compromised patients undergoing oral surgeries. Searches were performed in electronic databases for clinical studies with compromised patients undergoing oral surgery who used platelet concentrates. Only studies published in English were included. Two independent researchers carried out the selection of studies. The study design and objective, surgical procedure and platelet concentrate used, systemic involvement, analyzed outcome, and main results were extracted. A descriptive analysis of the data was performed. Twenty-two studies met the eligibility criteria and were included. Case series was the most frequent study design among the included studies (41.0%). In terms of systemic disability, 19 studies reported patients with cancer and related to surgical treatment 16 studies reported patients underwent treatment for osteonecrosis related to the use of the drug. The most used platelet concentrate was pure platelet-rich fibrin (P-PRF). In general, most studies recommend the use of platelet concentrates. Thus, the results of this study suggest that the evidence related to the use of platelet concentrates in compromised patients when undergoing oral surgeries is still initial. Also, most studies assessed the use of platelet concentrates in patients with osteonecrosis.

Microtensile bond strength of glass fiber posts cemented with self-adhesive and self-etching resin cements.

PURPOSE: To evaluate the bond strength of glass fiber posts to intraradicular dentin when cemented with self-etching and self-adhesive resin cements. MATERIALS AND METHODS: Forty-eight single-rooted human teeth were decoronated, endodontically treated, post-space prepared and divided into 8 groups (n = 6). The glass fiber posts used were: Exacto (EA) (Angelus) and everStick (ES) (StichTeck), which were cemented with two self-adhesive resin cements: BisCem (BIS) (Bisco) and Rely-X Unicem (UNI) (3M/ESPE), and two self-etching resin cements: Esthetic Cementing System NAC100 (NAC) (Kuraray) and Panavia-F (PAN) (Kuraray). Specimens were thermocycled between 5°C and 55 °C for 1000 cycles and stored in water at 37°C for 1 month. Four 1-mm-thick (in cross section) rods were obtained from the cervical region of the roots. Specimens were then subjected to microtensile testing in a special machine (BISCO; Schaumburg, IL, USA) or a crosshead speed of 0.5 mm/min. Microtensile bond strength (µTBS) data were analyzed with two-way ANOVA and Tukey's tests. RESULTS: Means (and SD) of µTBS (MPa) were: EA/PAN: 10.3 (4.1), EA/NAC: 14 (5.1) EA/BIS: 16.4 (4.8), EA/UNI: 19.8 (5.1), ES/PAN: 25.9 (6.1), ES/NAC: 29.1 (7), ES/BIS: 28.9 (6), ES/UNI: 30.5 (6.6). ANOVA indicated significant differences among the groups (p < 0.001). Mean µTBS values obtained with ES post were significantly higher than those obtained with EA (p < 0.001). For EA, Tukey's test indicated that higher µTBS means were obtained with the self-adhesive resin cements (BIS and UNI), which were statistically significantly different (p < 0.05) from values obtained with the self-etching resin cements (PAN and NAC). Different cements had no significant effects on the bond strength values of ES post (p > 0.05). µTBS values obtained with ES post were significantly higher than those obtained with EA post irrespective of the resin cement used. CONCLUSION: everStick posts resulted in the highest mean µTBS values with all cements. Self-adhesive cements performed well in terms of bond strength.

Efficacy of 3 Supplementary Irrigation Protocols in the Removal of Hard Tissue Debris from the Mesial Root Canal System of Mandibular Molars.

INTRODUCTION: Instrumentation of the mesial root canal system of mandibular molars may hinder disinfection by packing hard tissue debris within the isthmuses. The removal of accumulated hard tissue debris (AHTD) by 3 supplemental irrigation systems, 2 ultrasonically activated and 1 multisonic, was assessed with micro-computed tomographic imaging. METHODS: Twenty-four extracted mandibular molars with 2 mesial canals connected by an isthmus and converging to a single foramen were selected. After preparation of the mesial canals with WaveOne Gold instruments (Dentsply Maillefer, Ballaigues, Switzerland), anatomically matched specimens were assigned to 3 final irrigation protocols (n = 8): intermittent ultrasonic (IU) with an ultrasonically energized 200-µm wire (Irrisafe; Satelec, Bordeaux, France), continuous ultrasonic (CU) with an ultrasonic irrigation needle (ProUltra PiezoFlow, Dentsply Maillefer), and GentleWave (GW) system (Sonendo Inc, Laguna Hills, CA). Specimens were scanned (SkyScan 1176; Bruker-microCT, Kontich, Belgium) at 17.18-µm pixel size before and after preparation and irrigation protocols. Data sets were coregistered, and the percentage reduction of AHTD calculated within the canals and isthmus for each specimen was statistically compared using 1-way analysis of variance and post hoc Tukey tests with a 5% significance level. RESULTS: The mean percentage reduction of AHTD in canals and isthmuses was significantly higher for GW (96.4% and 97.9%, respectively) than for CU (80.0% and 88.9%, respectively) (P < .05). AHTD reduction for IU (91.2% and 93.5%, respectively) did not differ significantly from GW and CU (P > .05). CONCLUSIONS: GW achieved greater efficacy in the removal of AHTD from the mesial root canal system of mandibular molars compared with CU but not IU. The efficacy of CU and IU was comparable.

Root Canal Preparation Does Not Induce Dentinal Microcracks In Vivo.

INTRODUCTION: This in vivo study aimed to evaluate the development of dentinal microcracks after root canal preparation of contralateral premolars with rotary or hand instruments using micro-computed tomographic technology. METHODS: Sixty contralateral intact maxillary and mandibular premolars in which extraction was indicated for orthodontic purposes were selected and distributed into positive (n = 6, teeth with induced root microcracks) and negative (n = 6, intact teeth) control groups as well as 2 experimental groups (n = 24) according to the instrumentation protocol: ProTaper rotary (PTR) or ProTaper hand (PTH) systems (Dentsply Maillefer, Ballaigues, Switzerland). After root canal preparation, teeth were extracted using an atraumatic technique and scanned at a resolution of 17.18 µm. A total of 43,361 cross-sectional images of the roots were screened for the presence of dentinal microcracks. The results were expressed as the percentage and number of root section images with microcracks for each group. RESULTS: All roots in the positive control group showed microcracks at the apical third, whereas no cracks were observed in the specimens of the negative control group. In the PTR group, 17,114 cross-sectional images were analyzed, and no microcrack was observed. In the PTH group, dentinal microcracks were observed in 116 of 17,408 cross-sectional slices (0.66%) of only 1 specimen. These incomplete microcracks extended from the external root surface into the inner root dentin at the area of reduced dentin thickness. CONCLUSIONS: Root canal instrumentation with PTR and PTH instruments of contralateral maxillary and mandibular premolars did not result in the formation of dentinal microcracks in vivo.

Influence of different endodontic filling materials on root fracture susceptibility.

OBJECTIVE: To evaluate the influence of different endodontic materials on root fracture susceptibility. METHODS: Seventy-two mandibular incisors were sectioned 1mm below the cementoenamel junction to obtain roots of 12 mm length. Roots were submitted to chemomechanical preparation with the rotary instruments of Profile system. The obturation of root canals were performed with the following filling materials (n=12): GI, unfilled teeth (control); GII, Endofill+gutta-percha; GIII, Sealer 26+gutta-percha; GIV, AH Plus+gutta-percha; GV, Epiphany+gutta-percha; GVI, Epiphany+Resilon. After the sealers setting time, each root was embedded in acrylic resin. The specimens were then submitted to fracture resistance test using an Instron testing machine at 1mm/min. RESULTS: The ANOVA test showed no significant statistical difference (p>.05) among GI (162.16+/-41.4N), GII (168.46+/-37.5N), GIII (164.83+/-35.7N), GIV (168.29+/-38.7N), GV (172.36+/-20.6N) and GVI (193.11+/-42.8N). CONCLUSION: The core materials (gutta-percha or Resilon) combined with the tested endodontic sealers are not able to increase the root fracture resistance in canals submitted to chemomechanical preparation.

Use of platelet concentrates in oral surgery of patients with osteonecrosis: a scoping review

Abstract The objective of this study was to map, through a scoping review, the evidence available in the literature on the use of platelet concentrates in compromised patients undergoing oral surgeries. Searches were performed in electronic databases for clinical studies with compromised patients undergoing oral surgery who used platelet concentrates. Only studies published in English were included. Two independent researchers carried out the selection of studies. The study design and objective, surgical procedure and platelet concentrate used, systemic involvement, analyzed outcome, and main results were extracted. A descriptive analysis of the data was performed. Twenty-two studies met the eligibility criteria and were included. Case series was the most frequent study design among the included studies (41.0%). In terms of systemic disability, 19 studies reported patients with cancer and related to surgical treatment 16 studies reported patients underwent treatment for osteonecrosis related to the use of the drug. The most used platelet concentrate was pure platelet-rich fibrin (P-PRF). In general, most studies recommend the use of platelet concentrates. Thus, the results of this study suggest that the evidence related to the use of platelet concentrates in compromised patients when undergoing oral surgeries is still initial. Also, most studies assessed the use of platelet concentrates in patients with osteonecrosis.

Resumo O objetivo do estudo foi mapear, através de uma revisão de escopo, as evidências disponíveis na literatura sobre o uso de agregrantes plaquetários em pacientes comprometidos e que realizaram cirurgias odontológicas. Pesquisas foram realizadas em bases de dados por estudos clínicos com pacientes comprometidos que realizaram cirurgia odontológica e usaram agragantes plaquetários. Apenas estudos em inglês foram incluídos. Dois pesquisadores independentes realizaram a seleção dos estudos. Os seguintes dados foram extraídos: desenho do estudo, objetivo, procedimento cirúrgico, agregante plaquetário usado, envolvimento sistêmico, desfecho analisado e principais resultados. Uma análise descritiva dos dados foi realizada. Vinte e dois estudos preencheram os critérios de elegibilidade e foram incluídos. Série de casos foi o desenho de estudo mais frequente entre os estudos incluídos (41,0%). Em relação ao comprometimento sistêmico, 19 estudos reportaram pacientes com câncer e em relação ao tratamento cirúrgico, 16 estudos reportaram pacientes que realizavam tratamento para osteonecrose relacionada ao uso de medicamentos. O agregante mais utilizado foi o plasma rico em fribina (P-PRF). Em geral, maioria dos estudos recomendou o uso dos agregantes plaquetários. Assim, os resultados desse estudo sugerem que a evidência relacionada ao uso de agregantes plaquetários em pacientes comprometidos que realizam cirurgia odontológica é ainda inicial. Ainda, a maioria dos estudos avaliaram o uso de agregantes plaquetários em pacientes com osteonecrose.

Nerve sheath myxoma of the gingiva: report of a rare case and review of the literature.

BACKGROUND: Nerve sheath myxoma (NSM) is an extremely rare benign neoplasm in the oral cavity. This paper describes the first case, to our knowledge, of NSM in the gingival mucosa of an 84-year-old female patient. METHODS: Intraoral examination revealed a painless and well-defined nodule in the lingual gingival mucosa of the right mandibular lateral incisor, which measured approximately 1.0 cm in diameter. The lesion was fully excised under local anesthesia, without intercurrences. Hematoxylin and eosin staining was performed in 5-microm sections for histopathologic analysis. Immunohistochemical reactions against vimentin and S-100 protein were carried out in 3-microm histologic sections in accordance with manufacturers' instructions. RESULTS: The patient's medical history and an extraoral exam did not reveal other abnormalities. The patient wore a removable partial denture in the affected area. A trauma-induced gingival hyperplasia was the main diagnostic hypothesis. Microscopically, the lesion was composed of an abundant myxoid matrix and stellated and spindle-shaped cells arranged in lobules separated by fine fibrous septa. The cells presented strong positivity for vimentin and S-100 protein. According to the histopathologic and immunohistochemical features, the diagnosis of NSM was established. After 9 months of treatment, no signs or symptoms of recurrences have been observed. CONCLUSION: Although NSM is an extremely rare oral tumor, it should be considered in the clinical differential diagnosis of gingival nodules.

Ex vivo analysis of the debris remaining in flattened root canals of vital and nonvital teeth after biomechanical preparation with Ni-Ti rotary instruments.

The purpose of this study was to assess the presence of apical debris remaining in the apical third of flattened root canals of vital and nonvital teeth after biomechanical preparation with Ni-Ti rotary instruments. Fresh-extracted human mandibular incisors were used in this study. The teeth had clinical indication for extraction and were submitted to cold pulp vitality testing and radiographic examination. Eighteen teeth were selected and randomly assigned to two groups (n=9), according to the clinical diagnosis, i.e., pulp vitality or pulp necrosis. The canals were instrumented with the ProTaper NiTi rotary system in the following sequence: S1--up to the middle third; SX--at the cervical third; S2--up to the apical third; and S1, F1, F2, F3--at the working length. The canals were irrigated with 1% sodium hypochlorite, dried and were submitted to the histological processing. Sections from the apical third were analyzed by an optical microscope (X40) that was coupled to a computer where the images were captured and analyzed using specific softwares. A grid was placed over these images to assess the total canal area and the areas with debris. Mann-Whitney U-test showed no statistically significant difference (p>0.05) between the teeth with pulp vitality (6.49 +/- 3.39) and those with pulp necrosis (5.95 +/- 2.22). It may be concluded that the clinical condition of pulp tissue did not interfere with the amount of debris remaining in the apical third of flattened root canals prepared with Ni-Ti rotary instruments.

Fracture Strength of Weakened Anterior Teeth Associated to Different Reconstructive Techniques.

This study evaluated the fracture strength of endodontically treated teeth submitted to reconstructive techniques through dynamic and static tests. Forty human anterior teeth were divided into 4 groups (n=10): GNW (non-weakened) - root restored with glass fiber post (GFP), GW - weakened root restored with GFP, GDA - weakened root restored with direct anatomic GFP, and GIA - weakened root restored with indirect anatomic GFP. The teeth were endodontically treated considering that experimental groups (GW, GDA and GIA) simulated weakened roots for restoration with GFP using different techniques. The GFP was luted with resin cement and the coronal portion was restored with composite resin and metallic crowns. All samples were submitted to chewing simulation at 60 cycles/min in a total of 300,000 cycles. The survival samples were further exposed to compressive loading at a crosshead speed of 1.0 mm/min in a universal testing machine. The load was applied at 135° to the long axis of the tooth until failure. Data were analyzed by ANOVA (a=0.05). After chewing simulation were observed: GNW: 100% of survival roots; GW: 70% of survival roots, and GDA and GIA: 80% of survival roots. The mean fracture strength values (N) were 280.6 (GNW), 239.0 (GW), 221.3 (GDA), and 234.1 (GIA) without significant difference among the groups (p=0.7476). The results suggested similar fracture strength in both weakened and non-weakened teeth regardless the reconstructive technique of root internal wall. Higher incidence of catastrophic fracture was observed in weakened teeth without restoration of the root internal wall.

Stress Distribution in Roots Restored with Fiber Posts and An Experimental Dentin Post: 3D-FEA.

The aim of this study was to compare the stress distribution in radicular dentin of a maxillary canine restored with either a glass fiber post, carbon fiber post or an experimental dentin post using finite element analysis (3D-FEA). Three 3D virtual models of a maxillary canine restored with a metal-ceramic crown and glass fiber post (GFP), carbon fiber post (CFP), and experimental dentin post (DP) were obtained based on micro-CT images. A total of 180 N was applied on the lingual surface of the incisal third of each tooth at 45 degrees. The models were supported by the periodontal ligament fixed in three axes (x=y=z=0). The von Mises stress (VMS) of radicular dentin and the intracanal posts was calculated. The structures of all groups showed similar values (MPa) and distribution of maximum von Mises stress. Higher stress was found in the apical third of dentin while the posts presented homogeneous stress distribution along the axis. The fiber and dentin posts exhibited similar stress values and distribution. Thus, the experimental dentin post is a promising restorative material.

Effect of Er:YAG laser on adhesion of root canal sealers.

This in vitro study evaluated the effect of Er:YAG laser on adhesion to human dentin of Grossman, Endomethasone, N-Rickert, and Sealer 26 root canal sealers. The crowns of 40 human molars were cut on the occlusal side until a flat dentin surface was obtained. The teeth were divided into two groups: group 1, no laser application; and group 2, irradiation with Er:YAG laser (KaVo Key Laser 2; 11 mm focal distance, perpendicular to the dentin surface, 4 Hz frequency, 200 mJ energy, 62 J total energy and 313 pulses, 1-min application time, and 2.25 W power). Five samples were tested for each sealer and each group. An Instron universal testing machine was used for the adhesion test. Sealer 26 showed the best adhesion both with and without laser application (p < 0.01). Grossman and N-Rickert sealers had intermediate values, and Endomethasone had the worst adhesion. Application of Er:YAG laser did not alter the adhesion of Grossman, N-Rickert, or Endomethasone sealers. However, laser application increased the adhesion of Sealer 26. The epoxy resin-based root canal sealer (Sealer 26) adhered better to dentin prepared with and without Er:YAG laser than the zinc oxide/eugenol-based sealers (Endomethasone, N-Rickert, and Grossman).

Evaluation of the antimicrobial effect of Er:YAG laser irradiation versus 1% sodium hypochlorite irrigation for root canal disinfection.

This laboratory study evaluated Er:YAG laser antibacterial action in infected root canals. Forty-eight maxillary central incisors were used. After canal preparation, the teeth were autoclaved and divided into four groups: (1) non-treated teeth (control group); (2) teeth treated with NaOCl; (3) teeth irradiated with Er:YAG laser (7 Hz, 100 mJ, 80 pulses/canal, 11 sec) to the working length; (4) teeth irradiated similarly to, but 3 mm short, of the apex. The root canals from Groups 2, 3 and 4 were inoculated with 4 bacteria: Bacillus subtillus, Enterococcus faecalis, Pseudomonas aeruginosa, and Staphylococcus aureus, together with Candida albicans, and maintained for 24 h at 37 degrees C. All suspensions were adjusted to tube 2 of the MacFarland scale. The intracanal material was then collected with sterile paper points, which were placed in the canals for 5 min and then immersed in 5 ml of BHI medium. This was then seeded onto agar and stained by Gram's method. The NaOCl solutions and the Er:YAG laser irradiation to working length were effective against all five micro-organisms; however, 70% of the specimens irradiated 3 mm short of the apex remained infected.

Bond strength of restorative material to dentin submitted to bleaching and Er:YAG laser post-treatment.

OBJECTIVE: The purpose of this study was to assess the bond strength of a restorative material to bleached dentin, pretreated with Er:YAG laser. BACKGROUND DATA: Laser irradiation for dental surface treatment may increase the bond strength of restorative material to tooth surface. There are no reports of using Er:YAG laser on dentin bleached with 35% hydrogen peroxide. METHODS: Forty maxillary canines were sectioned, resulting in 80 fragments (5×5 mm) of intracoronary dentin that were divided into eight groups (n=10) according to the dental bleaching (present or not), surface conditioning (with or without laser) and the post-bleaching time to perform restoration (immediately or 7 days). The bleached specimens received two applications of 38% hydrogen peroxide. Er:YAG laser was applied for 20 sec with 400 mJ/15 Hz. Restorative procedure was performed using phosphoric acid, an adhesive system, and resin using a split Teflon matrix. The specimens were submitted to shear bond strength test and the data (MPa) were analyzed by ANOVA and Tukey's test (α=0.05). RESULTS: There were significant differences among the three factors (p<0.05). The highest values were obtained for unbleached specimens compared with bleached, for those treated with laser compared with those only conditioned with acid, and for those restored after 7 days compared with those having immediate restoration. In the interaction of factors, the bleached specimens treated with laser and restored immediately were statistically similar (p>0.05) to those bleached and restored after 7 days. CONCLUSIONS: Er:YAG laser can restore the bond strength of the dentin/restorative material interface even if the restoration is performed immediately after bleaching.

Healing of a tooth with an overinstrumented apex, extensive transportation and periapical lesion using a 5 mm calcium hydroxide apical plug: an 8-year follow-up report.

Besides the risk of filling material extrusion throughout the apex, a satisfactory apical seal can be difficult to achieve in canals with open apices or iatrogenic enlargements of the apical constriction. These situations pose a challenge to root canal filling. This paper describes the root canal filling of a maxillary right canine with an overinstrumented apex, complete loss of the apical stop, extensive canal transportation and apical periodontitis. A 5 mm calcium hydroxide apical plug was placed before root canal filling. The plug was made by soaking paper points with saline, dipping the points in calcium hydroxide powder and then applying it to the apex several times, until a consistent apical plug was obtained. The canal was then irrigated with saline in order to remove any residual calcium hydroxide from the root canal walls, dried with paper points and obturated with an inverted #80 gutta-percha cone and zinc oxide-eugenol based sealer by the lateral condensation technique. An 8-year radiographic follow-up showed formation of mineralized tissue sealing the apical foramen, apical remodeling and no signs of apical periodontitis.

Effect of high-concentrated bleaching agents on the bond strength at dentin/resin interface and flexural strength of dentin.

This study evaluated the effect of bleaching agents on bond strength at the dentin/resin interface and the flexural strength of dentin. Forty maxillary canines were selected for the study. In the shear strength test, 40 slabs of intracoronary dentin (5 x 5 mm) obtained from buccal surfaces of the crowns were included in acrylic resin. In the flexural strength test, 40 dentin bars (8 x 2 x 2 mm) were obtained from the roots. The 40 hemi-sections of the lingual surface were prepared for scanning electron microscopy (SEM). The specimens were divided into 4 groups according to the bleaching protocol (n=10): Unbleached (control), Sodium perborate + 20% hydrogen peroxide (SP + 20% HP), 37% carbamide peroxide (37% CP) and 38% hydrogen peroxide (38% HP). After 7 days, the bond strength specimens were restored and tested. Dentin bars were bleached and subjected to a three-point bending test. Data (MPa) were analyzed by ANOVA and Tukey's test (α=0.05). In the shear test, the control group was superior (p<0.05) to the bleached groups, which, in turn, were statistically similar (p>0.05). In the flexural strength test, the control group also had the highest values and differed significantly from the other groups (p<0.05). SEM revealed smear layer in all groups, with fissures in the bleached specimens. SP + 20% HP and 38% HP showed discontinuous interfaces with few tags. In conclusion, bond strength of restorative material to dentin and flexural strength of dentin were reduced after the use of high-concentration bleaching agents.

Flexural properties, morphology and bond strength of fiber-reinforced posts: influence of post pretreatment.

The aim of this study was to assess the influence of surface pretreatments of fiber-reinforced posts on flexural strength (FS), modulus of elasticity (ME) and morphology of these posts, as well as the bond strength (BS) between posts and core material. Fifty-two fiber posts (smooth and serrated) were assigned to 4 groups (n=13): no treatment (control), 10% hydrogen peroxide (HP) for 10 min (HP-10), 24% HP for 1 min (HP-24) and airborne-particle abrasion (Al(2)O(3)). To evaluate FS and ME, a 3-point bending test was performed. Three posts of each group were examined by scanning electron microscopy. Composite resin was used as the core build-up and samples were sectioned to obtain microtensile sticks. Data were analyzed by ANOVA and Tukey's test (α=0.05). For FS, significant differences were observed between posts type and surface pretreatment (p<0.05), with the highest means for the smooth posts. Al2O3 provided higher FS than HP-24. Al(2)O(3) promoted higher ME than HP-24 and control. SEM images revealed partial dissolution of the resin matrix in all treated groups. The smooth posts had higher BS and FS than serrated posts (p<0.05). Mechanical properties of the glass fiber posts and the bond strength between posts and composite material were not altered by the surface treatments, except for airborne-particle abrasion that increased the post elastic modulus.

Debris and smear removal in flattened root canals after use of different irrigant agitation protocols.

Scanning electron microscopy (SEM) can be used to analyze the presence of debris and smear layer on the internal walls of root canal. This study evaluated the debris and smear removal in flattened root canals using SEM after use of different irrigant agitation protocols. Fifty mandibular incisors were distributed into five groups (n = 10) according to the irrigant agitation protocol used during chemomechanical preparation: conventional syringe irrigation with NaviTip needle (no activation), active scrubbing of irrigant with brush-covered NaviTip FX needle, manual dynamic irrigation, continuous passive ultrasonic irrigation, and apical negative pressure irrigation (EndoVac system). Canals were irrigated with 5 mL of 2.5% NaOCl at each change of instrument and received a final flush with 17% EDTA for 1 min. After instrumentation, the roots were split longitudinally and SEM micrographs at ×100 and ×1,000 were taken to evaluate the amount of debris and smear layer, respectively, in each third. Data were analyzed by Kruskal-Wallis and Dunn's post-hoc tests (α = 5%). Manual dynamic activation left significantly (p < 0.05) more debris inside the canals than the other protocols, while ultrasonic irrigation and EndoVac were the most effective (p < 0.05) for debris removal. Regarding the removal of smear layer, there was no statistically significant difference (p > 0.05) either among the irrigant agitation protocols or between the protocol-canal third interactions. Although none of the irrigant agitation protocols completely removed debris and smear layer from flattened root canals, the machine-assisted agitation systems (ultrasound and EndoVac) removed more debris than the manual techniques.