Effect of accelerated stability on the physical, chemical, and mechanical properties of experimental bleaching gels containing different bioadhesive polymers.

OBJECTIVE: To evaluate the physical-chemical (weight, pH, quantification of hydrogen peroxide) and mechanical (texture profile and rheology tests) properties of the experimental bleaching gel based on the bioadhesive polymer Aristoflex® AVC, after accelerated stability testing. MATERIALS AND METHODS: A total of 300 syringes of bleaching gels were divided into 5 groups (n = 60): Whiteness Perfect® 10%-FGM (WP); carbamide peroxide 10% with aristoflex (CPa); carbamide peroxide 10% with Carbopol (CPc); aristoflex thickener (A); and Carbopol thickener (C). According to the following requirements and time, the accelerated stability test was performed: in an incubator at 40 °C and 75% humidity per 1, 3, and 6 months, and baseline (refrigerator at 5 °C and 25% humidity). The variables were analyzed following the statistical tests: Two-way ANOVA and Tukey's test were applied to pH; weight data were analyzed using a mixed model for repeated measurements over time and the Tukey-Kramer test; one-way ANOVA and Tukey's test analyzed the rheology test; generalized linear models were used to quantify the peroxide amount and texture profile data. A significance level of 5% was considered. RESULTS: The experimental bleaches CPa and CPc had the highest pH values when compared to the others in 6 months. Thickeners A and C did not change the pH, weight, and active content over the accelerated stability times (p > 0.05). Furthermore, there was weight loss after 3 months of storage for CPa and CPc (p < 0.05). In the quantification of hydrogen peroxide, the WP group showed the highest values over time (p < 0.0001), only showing a significant loss after the 3rd month. Meanwhile, CPa and CPc showed a reduction in quantification from the 1st month. CONCLUSIONS: Temperature and humidity directly influenced the active content and properties of bleaching gels. In addition, the presence of components regardless of thickeners, such as stabilizers, in the commercial gel allowed for greater stability over time. CLINICAL RELEVANCE: The development of experimental bleaching gels for clinical use requires careful testing. Therefore, accelerated stability testing represents a valuable tool in the development and evaluation of cosmetic formulations.

Altered physical-chemical properties of home bleaching gels after an accelerated stability study and their effects on tooth enamel.

OBJECTIVES: To investigate the physical-chemical properties of home bleaching gels based on Carbamide Peroxide (CP) and Hydrogen Peroxide (HP) after accelerated stability (AS) and its effects on enamel. MATERIALS AND METHODS: A total of 360 bovine teeth blocks were divided (n = 12): Control, CP10%-Whiteness Perfect, CP10%-Pola Night, HP7.5%-Pola Day, and HP7.5%-White Class Calcium. Microhardness (KHN), roughness (Ra), color (ΔE and ΔE00), hardness, compressibility, elasticity, cohesiveness, adhesiveness, weight, pH, and calcium (Ca) quantification in enamel were analyzed without storage of the bleaching gels and after AS at 1 and 3 months. Data of Ca, KHN, and Ra were analyzed through mixed models for repeated measurements and the Tukey-Kramer test. Values of weight, hardness, compressibility, and elasticity were analyzed with two-way ANOVA and Tukey's test. ΔE/ΔE00 data, cohesiveness, and adhesiveness were analyzed with Kruskal-Wallis and Dunn tests (α = 0.05). RESULTS: Groups subject to AS had lower ΔE and ΔE00 compared to those without storage. Lower KHN and higher Ra values were found after bleaching treatment in all groups compared to controls. Higher amounts of Ca were found on the first day of evaluation in the gels subject to AS for 3 months, regardless of the bleaching agent used. CONCLUSIONS: Incorrectly stored bleaching gel accentuates adverse effects on enamel. Temperature and humidity interfere directly with the chemical stability of bleaching agents, reducing their properties. CLINICAL RELEVANCE: HP is an unstable oxidizing agent when stored at high temperatures. Therefore, pH becomes more acidic and potentiates the demineralizing effect on enamel.

Effect of the ß-tricalcium phosphate particle on dental enamel associated with 10% carbamide peroxide bleaching.

Background: Since bleaching gels can cause adverse effects on tooth enamel, it is important to evaluate new remineralizing agents on the market and their effects. Material and Methods: Seventy-five bovine enamel/dentin blocks (4x4x3mm) were randomly divided into six groups (n=10): Negative Control (NC) with no bleaching treatment or brushing; 10 CP (Carbamide Peroxide) (no brushing - Whiteness Perfect FGM); CT12 + 10 CP (Colgate Total® 12); ES + 10 CP (Elmex® Sensitive); BPC + 10 CP (Bianco® ProClinical); CMP + 10 CP (Colgate® Máxima Proteção Anticáries). The color was evaluated by reflectance spectrophotometry (∆E*ab, ∆E00, and ∆WID) at times T1 (baseline), T2 (24 hours after brushing), and T3 (24 hours after bleaching). Knoop microhardness (KHN) analysis were performed at T3. The enamel surface was qualitatively analyzed by Scanning Electron Microscopy (SEM). The data were analyzed using generalized linear models through descriptive and exploratory analyses, and a significance level of 5% was considered. Results: Significant differences were observed when the bleached groups were compared to the NC group for ∆E*ab, ∆E00, and ∆WID at time T3 (p= <0.0001). However, the bleached groups presented no significant differences regarding studied times (p> 0.05). KHN did not differ significantly among the six groups (p=0.7585). Conclusions: Toothpastes with tricalcium phosphate (ß-TCP) do not intervene with the efficacy of bleaching treatment with 10% carbamide peroxide. Although a slight mineral deposition on enamel surface can be observed on SEM images, KHN was not significantly altered, and the polishing of the samples were maintained. Key words:Dental Bleaching, Carbamide Peroxide, Hydrogen Peroxide, Dental Enamel, Tricalcium Phosphate.

Characterization of whitening toothpastes and their effect on the physical properties of bulk-fill composites.

To characterize activated charcoal and 2% hydrogen peroxide-based toothpastes and investigate their effects on roughness, color change, and gloss of bulk-fill composite resin. Composite resin specimens (Aura Bulk Fill, SDI) were subjected to 5,000 brushing cycles with regular toothpaste (Colgate Total 12, [RT]), activated charcoal toothpaste (Bianco Dental Carbon, [AC]), or hydrogen peroxide-containing toothpaste (Colgate Luminous White Advanced, [HP]), with or without coffee exposure. The pH, particle characterization by scanning electron microscopy (SEM), and weight% of solid particles in the toothpaste were assessed. Roughness (Ra) was evaluated using a surface profile-measuring device, color change (∆Eab/∆E00) by reflectance spectrophotometer, and gloss unit (GU) by glossmeter. Kruskal-Wallis, Dunn, Friedman, and Nemenyi tests were used, and the correlation coefficient test was performed between Ra and GU (α=0.05). RT presented a higher Ra after brushing and did not change after staining with coffee; moreover, the ∆Eab/∆E00 values were higher for RT than HP. Regarding gloss, AC and HP obtained higher values compared to RT. A significant negative correlation between gloss and Ra was found for RT exposed to coffee. All toothpastes had a neutral pH; however, RT had the largest percentage of solids by weight. SEM images showed particles of many sizes: irregular shape (RT), more regular particles (AC), and spherical clusters (HP). Although surface roughness, color change, and gloss may compromise the longevity of restorations, the whitening toothpastes tested did not promote more morphology changes than regular toothpastes.

Effect of experimental bleaching gels with polymers Natrosol and Aristoflex on the enamel surface properties.

Natrosol and Aristoflex® AVC polymers are widely applied in the cosmetic industry and have recently been applied as a thickener option in the composition of dental bleaching gels, with the purpose to reduce the adverse effects on enamel mineral components. The aim of this study was to evaluate the color variation (ΔE* ab, ΔE00, ∆WID), surface roughness (Ra), and mineral content quantification (Raman Spectroscopy) of dental enamel after bleaching treatment with experimental gel-based on 10% carbamide peroxide (CP), containing Carbopol, Natrosol, and Aristoflex® AVC. Sixty bovine teeth were randomly divided into 6 groups (n=10): Negative Control (NC) - no treatment; Positive Control (PC) - Whiteness Perfect 10% - FGM; CP with Carbopol (CPc); CP with Natrosol (CPn); CP with Aristoflex® AVC (CPa); NCP - no thickener. Data were analyzed, and generalized linear models (∆WID -T0 x T1) were used for repeated measurements in time for Ra and with a study factor for ΔE* ab and ΔE00. For the evaluation of the mineral content, data were submitted to one-way ANOVA and Tukey tests. For enamel topographic surface analysis the Scanning Electron Microscope (SEM) was performed. A significance level of 5% was considered. ΔE* ab and ΔE00 were significantly higher for CPc, CPn, CPa, and NCP groups. (∆WID) showed a significantly lower mean than the other groups for NC in T1. After bleaching (4-hour daily application for 14 days), Ra was higher in the CPc, CPn, and PC groups. For CPa, Ra was not altered. No significant difference was found in the quantification of mineral content. CPa preserved the surface smoothness more effectively. Aristoflex® AVC is a viable option for application as a thickener in dental bleaching gels, presenting satisfactory performance, and maintaining the whitening efficacy of the gel, with the advantage of preserving the surface roughness of tooth enamel without significant loss of mineral content.

Effect of experimental bleaching gels with polymers Natrosol and Aristoflex on the enamel surface properties

Abstract Natrosol and Aristoflex® AVC polymers are widely applied in the cosmetic industry and have recently been applied as a thickener option in the composition of dental bleaching gels, with the purpose to reduce the adverse effects on enamel mineral components. The aim of this study was to evaluate the color variation (ΔE* ab, ΔE00, ∆WID), surface roughness (Ra), and mineral content quantification (Raman Spectroscopy) of dental enamel after bleaching treatment with experimental gel-based on 10% carbamide peroxide (CP), containing Carbopol, Natrosol, and Aristoflex® AVC. Sixty bovine teeth were randomly divided into 6 groups (n=10): Negative Control (NC) - no treatment; Positive Control (PC) - Whiteness Perfect 10% - FGM; CP with Carbopol (CPc); CP with Natrosol (CPn); CP with Aristoflex® AVC (CPa); NCP - no thickener. Data were analyzed, and generalized linear models (∆WID -T0 x T1) were used for repeated measurements in time for Ra and with a study factor for ΔE* ab and ΔE00. For the evaluation of the mineral content, data were submitted to one-way ANOVA and Tukey tests. For enamel topographic surface analysis the Scanning Electron Microscope (SEM) was performed. A significance level of 5% was considered. ΔE* ab and ΔE00 were significantly higher for CPc, CPn, CPa, and NCP groups. (∆WID) showed a significantly lower mean than the other groups for NC in T1. After bleaching (4-hour daily application for 14 days), Ra was higher in the CPc, CPn, and PC groups. For CPa, Ra was not altered. No significant difference was found in the quantification of mineral content. CPa preserved the surface smoothness more effectively. Aristoflex® AVC is a viable option for application as a thickener in dental bleaching gels, presenting satisfactory performance, and maintaining the whitening efficacy of the gel, with the advantage of preserving the surface roughness of tooth enamel without significant loss of mineral content.

Resumo Os polímeros Natrosol e Aristoflex® AVC são amplamente utilizados na indústria cosmética e foram recentemente aplicados como uma opção de espessante na composição de géis de clareamento dental, com o objetivo de reduzir os efeitos adversos sobre os componentes minerais do esmalte. O objetivo deste estudo foi avaliar a variação de cor (ΔE*ab, ΔE00, ∆WID), rugosidade da superfície (Ra), e quantificação do conteúdo mineral (Raman Spectroscopy) do esmalte dentário após clareamento dental com gel experimental baseado em 10% de peróxido de carbamida (CP), contendo Carbopol, Natrosol e Aristoflex® AVC. Sessenta dentes bovinos foram divididos aleatoriamente em 6 grupos (n=10): Controle Negativo (CN) - sem tratamento; Controle Positivo (CP) - Brancura Perfeita 10% - FGM; CP com Carbopol (CPc); CP com Natrosol (CPn); CP com Aristoflex® AVC (CPa); NCP - sem espessante. Os dados foram analisados e modelos lineares generalizados (∆WID -T0 x T1) foram usados para medições repetidas no tempo para Ra e com um fator de estudo para ΔE*ab e ΔE00. Para a avaliação do conteúdo mineral, os dados foram submetidos a testes unidirecionais de ANOVA e Tukey. Para a análise da superfície topográfica do esmalte, o Microscópio Eletrônico de Varredura (SEM) foi realizado. Um nível de significância de 5% foi considerado. ΔE*ab e ΔE00 foram significativamente maiores para os grupos CPc, CPn, CPa e NCP. (∆WID) mostrou uma média significativamente menor do que os outros grupos para NC em T1. Após o clareamento (aplicação diária de 4 horas por 14 dias), Ra foi maior nos grupos CPc, CPn e PC. Para CPa, Ra não foi alterado. Nenhuma diferença significativa foi encontrada na quantificação do conteúdo mineral. O CPa preservou a suavidade da superfície de forma mais eficaz. Aristoflex® AVC é uma opção viável para aplicação como espessante em géis de clareamento dental, apresentando desempenho satisfatório e mantendo a eficácia clareadora do gel, com a vantagem de preservar a rugosidade da superfície do esmalte dentário sem perda significativa de conteúdo mineral.

Characterization of whitening toothpastes and their effect on the physical properties of bulk-fill composites

Abstract Objective To characterize activated charcoal and 2% hydrogen peroxide-based toothpastes and investigate their effects on roughness, color change, and gloss of bulk-fill composite resin. Methodology Composite resin specimens (Aura Bulk Fill, SDI) were subjected to 5,000 brushing cycles with regular toothpaste (Colgate Total 12, [RT]), activated charcoal toothpaste (Bianco Dental Carbon, [AC]), or hydrogen peroxide-containing toothpaste (Colgate Luminous White Advanced, [HP]), with or without coffee exposure. The pH, particle characterization by scanning electron microscopy (SEM), and weight% of solid particles in the toothpaste were assessed. Roughness (Ra) was evaluated using a surface profile-measuring device, color change (∆Eab/∆E00) by reflectance spectrophotometer, and gloss unit (GU) by glossmeter. Kruskal-Wallis, Dunn, Friedman, and Nemenyi tests were used, and the correlation coefficient test was performed between Ra and GU (α=0.05). Results RT presented a higher Ra after brushing and did not change after staining with coffee; moreover, the ∆Eab/∆E00 values were higher for RT than HP. Regarding gloss, AC and HP obtained higher values compared to RT. A significant negative correlation between gloss and Ra was found for RT exposed to coffee. All toothpastes had a neutral pH; however, RT had the largest percentage of solids by weight. SEM images showed particles of many sizes: irregular shape (RT), more regular particles (AC), and spherical clusters (HP). Although surface roughness, color change, and gloss may compromise the longevity of restorations, the whitening toothpastes tested did not promote more morphology changes than regular toothpastes.

A clinical evaluation of zirconia reinforced lithium silicate glass-ceramic CAD/CAM onlay: a two-year case report / Avaliação clínica de onlay cerâmica do tipo CAD / CAM de silicato de lítio reforçado com zircônia: um relato de caso de dois anos

ABSTRACT The CAD/CAM technology arose from the need to develop materials with better mechanical and optical properties that could be used for making monolithic restorations. Several materials have been used for milling indirect restorations in prefabricated blocks. Among them, lithium silicate reinforced with zirconia. Due to its recent introduction in the market, this case report aimed to present a detailed clinical protocol for the execution of a ceramic onlay of this material using CAD/CAM technology. A 57-year-old female patient sought care with extensive restoration in composite resin (BOMD) of tooth 15 maintained for almost two years. However, due to bruxism, constant dental tightening, the extension of the direct restoration and the need for improved esthetics, it was proposed to replace it with an indirect ceramic onlay restoration. Prophylaxis and choice of the color of the patient's dental substrate were performed. Afterwards, the dental preparation was made and polished. Subsequently, the molding was made with addition silicone and the provisional restoration confectioned. Once the stone model was obtained, it was scanned and the ceramic onlay restoration was milled using CAD/CAM technology. Finally, the restoration was stained and cemented over the preparation. After 2 years, the restoration remained stable, with no evidence of color mismatch, marginal discoloration, marginal cleft, caries or fracture, proving the effectiveness of the treatment in this time interval. The correct indication of the ceramic material combined with the use of CAD/CAM technology facilitated the restorative process, restoring function and the esthetics desired by the patient.

RESUMO A tecnologia CAD/CAM surgiu da necessidade de desenvolvimento de materiais com melhores propriedades mecânicas e ópticas que pudessem ser utilizados para confecção de restaurações monolíticas. Diversos materiais têm sido utilizados para fresagem de restaurações indiretas em blocos pré-fabricados. Dentre eles, o silicato de lítio reforçado com zircônia. Devido a sua recente introdução no mercado, este relato de caso objetivou apresentar um protocolo clínico detalhado para a execução de uma onlay cerâmica desse material utilizando a tecnologia CAD/CAM. Paciente, 57 anos, sexo feminino, procurou atendimento com extensa restauração em resina composta envolvendo as faces (MODV) do dente 15 mantida por quase dois anos. Contudo, em virtude do bruxismo, do apertamento dental constante, da extensão da restauração direta e da necessidade de melhora na estética, foi proposto a substituição por uma restauração indireta em cerâmica do tipo onlay. Foi realizada a profilaxia e escolha da cor do substrato dental da paciente. Em seguida o preparo dental foi confeccionado e polido. Posteriormente foi feita a moldagem com silicone de adição e a confecção do provisório. Com a obtenção do modelo, este foi escaneado e fresada a onlay cerâmica pela tecnologia CAD/CAM, que posteriormente foi maquiada e cimentada sobre o preparo. Após 2 anos, a restauração permaneceu estável, sem evidência de incompatibilidade de cor, descoloração marginal, fenda marginal, cárie ou fratura, comprovando a eficácia do tratamento neste intervalo de tempo. A correta indicação do material cerâmico aliada ao uso da tecnologia CAD-CAM facilitou o processo restaurador devolvendo função e a estética desejada pela paciente.

Do Dentistry and physical education students know the importance of mouthguard usage in sports practice? / Os alunos da Odontologia e Educação Física conhecem a importância do uso de protetores bucais na prática desportiva?

ABSTRACT Objective The purpose of the present study was to evaluate the knowledge of Dentistry and Physical Education students on mouthguard usage in sports practice. Methods A form containing questions that demonstrated participants' knowledge about the use of mouthguards was applied. Inclusion criteria were: individuals older than 18 years who were attending Dentistry or Physical Education courses from the sixth period and who agreed to participate in the study, and the exclusion criteria for dentistry students were: attended the discipline of Dental Materials II of UFPE and already participated in internships in schools or academies for the participants of the Physical Education course. Results it was possible to observe that 97% of the interviewees know what a mouthguard is, but none of the participants would be able to indicate a specific type of mouthguard to sportsmen. Conclusion It was possible to conclude that a large number of the interviewees know what a mouthguard is, but not enough to indicate which is the safest protector.

RESUMO Objetivo Avaliar o conhecimento dos alunos do curso de Odontologia e Educação Física sobre os protetores bucais nos desportos. Métodos Aplicação de formulário avaliando conhecimento dos participantes sobre o uso de protetores bucais. Os critérios de inclusão foram: indivíduos maiores de 18 anos que estivessem cursando os cursos de Odontologia ou Educação Física a partir do sexto período e que concordassem em participar da pesquisa, já os critérios de exclusão para os alunos do curso de Odontologia foram: não ter cursado a disciplina de Materiais Dentários II da UFPE e já ter participado de estágios em escolas ou academias no caso dos participantes do curso de Educação Física. Resultados: foi possível observar que 97% dos entrevistados sabem o que é um protetor bucal, porém, nenhum dos participantes saberiam indicar um tipo específico de protetor bucal aos desportistas. Conclusão que uma grande parcela dos entrevistados conhece o que é um protetor bucal, porém, não o suficiente para poder indicar qual o protetor mais seguro.

Resolution of a fluorosis case through the association of minimally invasive techniques: microabrasion and tooth bleaching

Color changes may interfere with smile balance and they represent a clinical challenge to dentists. Dental fluorosis originates from intrinsic factors and it is a disorder of enamel formation during the phase of teeth development, resulting in the change of enamel color. This clinical case report aimed to present the resolution of a case of dental fluorosis through the association of minimally invasive techniques, namely microabrasion and tooth bleaching. A 27-year-old male patient sought the dental clinic of the School of Dentistry of Piracicaba (FOP - UNICAMP, Brazil) presenting striped and symmetrical white stains and generalized chromogenic biofilm. After anamnesis and clinical examination, the patient was diagnosed with fluorosis stains. Initially, adequacy of the oral environment was performed with prophylaxis and supragingival scraping. Then, the enamel microabrasion technique was performed with 6% hydrochloric acid associated with silicon carbide (Whiteness RM - FGM) and supervised at-home bleaching was performed with 16% carbamide peroxide (Whiteness Simple 16% - FGM). In conclusion, the treatment performed reestablished the aesthetics and harmony of smile color with minimally invasive procedures without causing tooth sensitivity