RESUMO
A stimuli-responsive polymeric three-dimensional microstructured film (PTMF) is a 3D structure with an array of sealed chambers on its external surface. In this work, we demonstrate the use of PTMF as a laser-triggered stimulus-response system for local in vivo targeted blood vessels stimulation by vasoactive substances. The native vascular networks of the mouse mesentery were used as model tissues. Epinephrine and KCl were used as vasoactive agents that were sealed into individual chambers upon precipitation in the amount of pictograms. We demonstrated the method for non-damaged one-by-one chamber activation using a focused 532 nm laser light passed through biological tissues. To avoid laser-induced photothermal damage to biological tissues, the PTMF was functionalized with Nile Red dye, which effectively absorbs laser light. Chemically stimulated blood vessel fluctuations were analyzed using digital image processing methods. Hemodynamics changes were measured and visualized using the particle image velocimetry approach.
Assuntos
Lasers , Polímeros , Camundongos , Animais , Raios InfravermelhosRESUMO
Maxillofacial surgery placement of fixatures (Leonard Buttons, LB) at close proximity to surgical incisions provides a potential reservoir as a secondary local factor to advanced periodontal disease, with bacterial formation around failed fixatures implicating plaque. To address infection rates, we aimed to surface coat LB and Titanium (Ti) discs using a novel form of chlorhexidine (CHX), CHX-CaCl2 and 0.2% CHX digluconate mouthwash as a comparison. CHX-CaCl2 coated, double-coated and mouthwash coated LB and Ti discs were transferred to 1 mL artificial saliva (AS) at specified time points, and UV-Visible spectroscopy (254 nm) was used to measure CHX release. The zone of inhibition (ZOI) was measured using collected aliquots against bacterial strains. Specimens were characterized using Energy Dispersive X-ray Spectroscopy (EDS), X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). SEM displayed copious dendritic crystals on LB/ Ti disc surfaces. Drug release from double-coated CHX-CaCl2 was 14 days (Ti discs) and 6 days (LB) above MIC, compared to the comparison group (20 min). The ZOI for the CHX-CaCl2 coated groups was significantly different within groups (p < 0.05). CHX-CaCl2 surface crystallization is a new drug technology for controlled and sustained CHX release; its antibacterial effectiveness makes this drug an ideal adjunct following clinical and surgical procedures to maintain oral hygiene and prevent surgical site infections.
Assuntos
Anti-Infecciosos , Doenças Periodontais , Humanos , Clorexidina/farmacologia , Clorexidina/química , Antissépticos Bucais/farmacologia , Cloreto de Cálcio , Anti-Infecciosos/farmacologia , Bactérias , Titânio/farmacologia , Titânio/químicaRESUMO
The encapsulation of small hydrophilic molecules and response to specific biological triggers in a controlled manner have become two of the significant challenges in biomedical research, in particular in the field of localized drug delivery and biosensing. This work reports the fabrication of free-standing microchamber array films made of biodegradable polymers for the encapsulation and enzymatically triggered release of small hydrophilic molecules. Polycaprolactone (PCL) microchamber arrays were demonstrated to fully biodegrade within 5 hours of exposure to lipase from Pseudomonas cepacia (lipase PS) at a concentration of 0.5 mg ml-1, with lower concentrations producing correspondingly longer degradation times. The gradual process of deterioration was real-time monitored utilising laser Fraunhofer diffraction patterns. Additionally, a small hydrophilic molecule, 5(6)-carboxyfluorescein (CF), was loaded into the PCL microchamber arrays in a dry state; however, the substantial permeability of the PCL film led to leakage of the dye molecules. Consequently, polylactic acid (PLA) was blended with PCL to reduce its permeability, enabling blended PCL-PLA (1 : 2 ratio correspondingly) microchamber arrays to trap the small hydrophilic molecule CF. PCL-PLA (1 : 2) microchamber arrays hold potential for controlled release under the catalysis of lipase within 26 hours. Additionally, it is calculated that approximately 11 pg of CF dye crystals was loaded into individual microchambers of 10 µm size, indicating that the microchamber array films could yield a highly efficient encapsulation.
Assuntos
Proteínas de Bactérias/química , Fluoresceínas/química , Lipase/química , Poliésteres/química , Burkholderia cepacia/enzimologia , Composição de Medicamentos , Sistemas de Liberação de Medicamentos/instrumentação , Interações Hidrofóbicas e HidrofílicasRESUMO
Many nanomedicine approaches are struggling to reach high enough effectiveness in delivery if applied systemically. The perspective is sought to explore the clinical practices currently used for localized treatment. In this study, we combine in vivo targeting of carriers sensitive to the external magnetic field with clinically used endovascular delivery to specific site. Fluorescent micron-size capsules made of biodegradable polymers and containing magnetite nanoparticles incorporated in the capsule wall were explored in vivo using Near-Infrared Fluorescence Live Imaging for Real-Time. Comparison of systemic (intravenous) and directed (intra-arterial) administration of the magnetic microcapsule targeting in the hindpaw vessels demonstrated that using femoral artery injection in combination with magnetic field exposure is 4 times more efficient than tail vein injection. Thus, endovascular targeting significantly improves the capabilities of nanoengineered drug delivery systems reducing the systemic side effects of therapy.
Assuntos
Nanopartículas de Magnetita/química , Nanomedicina/métodos , Animais , Cápsulas/química , Sistemas de Liberação de Medicamentos/métodos , Humanos , Polímeros/químicaRESUMO
Layer-by-layer assembled polymeric multilayer capsules (PMC) of micrometer sizes are permeable for molecules below 1 KDa; therefore, the efficacy of such capsules in the delivery of low molecular weight water soluble bioactive compounds and drugs is frequently challenged. Thermally induced contraction of hollow PMC is explored here to enhance their loading efficacy with model compound, fluorescent rhodamine B (RhB). Four bilayered capsules obtained of poly(diallyldimethylammonium chloride)/polystyrene sulfonate ([PDADMAC/PSS]4 ) or poly-l-arginine/dextran sulfate ([PARG/DS]4 ) on sacrificial CaCO3 spherical microparticles are postloaded with RhB at ambient or elevated temperatures. The influence of heat on capsule loading is determined quantitatively by varying the amounts of capsules in the batch and keeping the concentration of RhB constant. The applied heat improves the loading efficacy of [PDADMAC/PSS]4 capsules at concentrations up to 2.25 × 109 capsules mL-1 , but has a reversed effect on [PARG/DS]4 capsules at all studied concentrations ((0-3.5) × 109 capsules mL-1 ).
Assuntos
Cápsulas/química , Temperatura Alta , Polímeros/química , Rodaminas/química , Sulfato de Dextrana/química , Peptídeos/química , Polietilenos/química , Poliestirenos/química , Compostos de Amônio Quaternário/químicaRESUMO
Development of composite polymer/graphene oxide (GO) materials attracts significant attention due to their unique properties. In this work, highly ordered arrays of hollow microchambers made of composite polyelectrolyte/GO multilayers (PEGOMs) are successfully fabricated via layer-by-layer assembly on sacrificial or sustainable templates having imprinted patterns of microwells on their surface. Mechanical and optical properties of PEGOMs are studied by nanoindentation and near-infrared (NIR) absorption spectroscopy. Incorporation of three GO layers in between the polyelectrolyte multilayer stacks increases Young's modulus and critical stress of the microchambers by a factor of 5.6 and 2.6, respectively. Optical density of this PEGOM film is found to decrease gradually from 0.14 at λ = 800 nm to 0.06 at λ = 1500 nm. Remote opening of PEGOM microchambers with NIR laser beam is also demonstrated. One of the possible applications of the developed structures includes micropackaging and delivery systems in biological tissues with remote triggering.
Assuntos
Grafite/química , Raios Infravermelhos , Fenômenos Mecânicos , Impressão Molecular/instrumentação , Polieletrólitos/química , Polimetil Metacrilato/química , Estresse MecânicoRESUMO
CRISPR-Cas9 is a revolutionary genome-editing technology that has enormous potential for the treatment of genetic diseases. However, the lack of efficient and safe, non-viral delivery systems has hindered its clinical application. Here, we report on the application of polymeric and hybrid microcarriers, made of degradable polymers such as polypeptides and polysaccharides and modified by silica shell, for delivery of all CRISPR-Cas9 components. We found that these microcarriers mediate more efficient transfection than a commercially available liposome-based transfection reagent (>70% vs. <50% for mRNA, >40% vs. 20% for plasmid DNA). For proof-of-concept, we delivered CRISPR-Cas9 components using our capsules to dTomato-expressing HEK293T cells-a model, in which loss of red fluorescence indicates successful gene editing. Notably, transfection of indicator cells translated in high-level dTomato knockout in approx. 70% of transfected cells. In conclusion, we have provided proof-of-principle that our micro-sized containers represent promising non-viral platforms for efficient and safe gene editing.
Assuntos
Sistemas CRISPR-Cas , Edição de Genes , Polímeros/química , Solanum lycopersicum/metabolismo , Portadores de Fármacos , Fluorescência , Técnicas de Transferência de Genes , Proteínas de Fluorescência Verde/antagonistas & inibidores , Proteínas de Fluorescência Verde/genética , Proteínas de Fluorescência Verde/metabolismo , Células HEK293 , Humanos , Solanum lycopersicum/genética , Dióxido de Silício/químicaRESUMO
Microcapsules, made of biodegradable polymers, containing magnetite nanoparticles with tunable contrast in both the T1 and T2 MRI modes, were successfully prepared using a layer-by-layer approach. The MRI contrast of the microcapsules was shown to depend on the distance between magnetite nanoparticles in the polymeric layers, which is controlled by their concentration in the microcapsule shell. A fivefold increase in the average distance between the nanoparticles in the microcapsule shell led to a change in the intensity of the MR signal of 100% for both the T1 and T2 modes. Enzyme treatment of biodegradable shells resulted in a change of the microcapsules' MRI contrast. In vivo degradation of nanocomposite microcapsules concentrated in the liver after intravenous injection was demonstrated by MRI. This method can be used for the creation of a new generation of drug delivery systems, including drug depot, with combined navigation, visualization and remote activated release of bioactive substances in vivo.
Assuntos
Materiais Biocompatíveis/química , Sistemas de Liberação de Medicamentos , Nanopartículas de Magnetita/química , Nanocompostos/química , Cápsulas , Imageamento por Ressonância MagnéticaRESUMO
Colloidal particles with fluorescence read-out are commonly used as sensors for the quantitative determination of ions. Calcium, for example, is a biologically highly relevant ion in signaling, and thus knowledge of its spatio-temporal distribution inside cells would offer important experimental data. However, the use of particle-based intracellular sensors for ion detection is not straightforward. Important associated problems involve delivery and intracellular location of particle-based fluorophores, crosstalk of the fluorescence read-out with pH, and spectral overlap of the emission spectra of different fluorophores. These potential problems are outlined and discussed here with selected experimental examples. Potential solutions are discussed and form a guideline for particle-based intracellular imaging of ions.
Assuntos
Técnicas Biossensoriais , Cálcio/química , Nanotecnologia/métodos , Óptica e Fotônica , Benzoxazinas/química , Endocitose , Corantes Fluorescentes/química , Ouro/química , Células HeLa , Humanos , Concentração de Íons de Hidrogênio , Íons , Nanopartículas Metálicas/química , Microscopia de Fluorescência , Tamanho da Partícula , Peptídeos/química , Polímeros/químicaRESUMO
Targeted delivery of drugs to specific diseased sites in the body is an area of research that has attracted many studies, particularly in drug deliveries that utilize microparticles. By achieving targeted delivery of a drug, one can increase the efficacy of the treatment, thus, reducing unwanted side effects. This study aims to synthesize microcapsules that are able to target and adsorb to specific proteins (i.e., collagen type IV and fibronectin) through antibody-antigen interactions, while simultaneously suppressing any unspecific binding, a characteristic that is commonly observed in polyelectrolyte microcapsule-protein interactions. This is accomplished by creating an antibody-functionalized poly(ethylene glycol) (PEG) assembly within the microcapsule structure. Site-specific adsorption of these microcapsules is tested using protein micropatterns. Results show that significant adsorption is achieved on the target protein, with unspecific adsorptions being heavily suppressed on control proteins. In conclusion, we have successfully manufactured microcapsules that specifically and exclusively bind to their complementary target area. This paves the way for future in vivo experiments using microcapsules as targeted drug carriers.
Assuntos
Portadores de Fármacos/síntese química , Polietilenoglicóis/síntese química , Adsorção , Anticorpos Imobilizados/química , Anticorpos Monoclonais Murinos/química , Cápsulas , Colágeno Tipo IV/química , Fibronectinas/química , Humanos , Ligação Proteica , Propriedades de SuperfícieRESUMO
Patterned arrays of light-responsive microchambers are suggested as candidates for site-specific release of chemicals in small and precisely defined quantities on demand. A composite film is made of poly(allylammonium)-poly(styrene sulfonate) multilayers and gold nanoparticles incorporated between subsequent stacks of polyelectrolytes. The film shaped as microchambers is loaded with colloid particles or oil-soluble molecules. The microchambers are sealed onto a glass slide precoated with an adhesive poly(diallyldimethylammonium)-poly(styrene sulfonate) multilayer film. A focused laser beam is used for remote addressing the individual microchambers and site-specific release of the loaded cargo.
Assuntos
Manufaturas , Coloides/química , Eletrólitos/química , Vidro/química , Ouro/química , Luz , Nanopartículas Metálicas/química , Óleos/química , Polietilenos/química , Poliestirenos/química , Compostos de Amônio Quaternário/químicaRESUMO
Microcapsules composed of weak polyelectrolytes modified with UV-responsive benzophenone (BP) groups were fabricated by the layer-by-layer (LbL) technique. Being exposed to UV lights, capsules shrunk in the time course of minutes at irradiation intensity of 5 mW/cm(2). The shrinkage adjusted the capsule permeability, providing a novel way to encapsulate fluorescence-labeled dextran molecules without heating. Cross-linking within the capsule shells based on hydrogen abstraction via excited benzophenone units by UV showed a reliable and swift approach to tighten and stabilize the capsule shell without losing the pH-responsive properties of the weak polyelectrolyte multilayers.
Assuntos
Benzofenonas/química , Cápsulas/química , Reagentes de Ligações Cruzadas/química , Ácidos Polimetacrílicos/química , Raios Ultravioleta , Benzofenonas/síntese química , Eletrólitos/química , Concentração de Íons de Hidrogênio , Modelos Moleculares , Estrutura Molecular , Ácidos Polimetacrílicos/síntese químicaRESUMO
Engineering of colloidal particles and capsules despite substantial progress is still facing a number of unsolved issues including low loading capacity, non-uniform size and shape of carriers, tailoring different functionalities and versatility to encapsulated cargo. In this work, we propose a method for defined-shaped functionally asymmetric polymer capsule fabrication based on a soft lithography approach. The developed capsules consist of two classes of polymers - the main part "cup" is made out of polyelectrolyte multilayers (PAH-PSS) and "lid" is made of biodegradable polyether (PLGA). Asymmetric capsules combine advantages from both traditional layer-by-layer capsules and recently developed printed "pelmeni" capsules. This combination provides stimuli-responsiveness due to polyelectrolyte multilayer properties differing from PLGA. The inner volume of capsules can be loaded with a variety of active compounds and the capsule's geometry is defined due to the soft-lithography method. Capsules have a core-shell structure and monodisperse size distribution. Three methods to trigger cargo release have been demonstrated, namely temperature treatment, ultrasonication and pH shift. Steroidal drug dexamethasone was used to illustrate the applicability of the systems for triggered drug release. The application of proposed asymmetric capsules includes but is not limited to pharmacology, diagnostics, sensors, micro- and nanoreactors and chemical actuators.
Assuntos
Polímeros , Cápsulas/química , Liberação Controlada de Fármacos , Polieletrólitos , Polímeros/químicaRESUMO
Sosnovsky's hogweed, Heracleum sosnowskyi has a high photosensitizing ability. Although Sosnovsky's hogweed is known as a poisonous plant, its chemical composition and phototoxicity are poorly studied. We analyzed the chemical composition of the Sosnovsky's hogweed juice that grew in natural conditions. It was found that the content of 8-methoxypsoralen in the juice is 1332.7 mg/L, and that of 5-methoxypsoralen is 34.2 mg/L. We have developed and analyzed liposomes containing furanocoumarins of Sosnovsky's hogweed juice and studied their photocytotoxicity in L929 mouse fibroblast cell culture. It was found that liposomes containing furanocoumarins of Sosnovsky's hogweed juice are more toxic for L929 cells in comparison with liposomal forms of pure substances 8-methoxypsoralen and 5-methoxypsoralen. It was found that when exposed to UV radiation at 365 nm at a dose of 22.2 J/cm2, the liposomal form of furanocoumarins Sosnovsky's hogweed is 3 times more toxic to L929 cells than in the dark. It was found that the photocytotoxic effect of liposomal furanocoumarins Sosnovsky's hogweed is a strongly stimulation of apoptosis.The data obtained suggest that the raw material of Sosnovsky's hogweed claims to be a source of furanocoumarins, and the liposomal form, given the hydrophobic properties of furanocoumarins, is very suitable for creating a phototherapeutic drug.
Assuntos
Furocumarinas , Heracleum , Animais , Furocumarinas/toxicidade , Heracleum/química , Lipossomos , Metoxaleno , Camundongos , Raios UltravioletaRESUMO
The outstanding optical properties and multiphoton absorption of lead halide perovskites make them promising for use as fluorescence tags in bioimaging applications. However, their poor stability in aqueous media and biological fluids significantly limits their further use for in vitro and in vivo applications. In this work, we have developed a universal approach for the encapsulation of lead halide perovskite nanocrystals (PNCs) (CsPbBr3 and CsPbI3) as water-resistant fluorescent markers, which are suitable for fluorescence bioimaging. The obtained encapsulated PNCs demonstrate bright green emission at 510 nm (CsPbBr3) and red emission at 688 nm (CsPbI3) under one- and two-photon excitation, and they possess an enhanced stability in water and biological fluids (PBS, human serum) for a prolonged period of time (1 week). Further in vitro and in vivo experiments revealed enhanced stability of PNCs even after their introduction directly into the biological microenvironment (CT26 cells and DBA mice). The developed approach allows making a step toward stable, low-cost, and highly efficient bioimaging platforms that are spectrally tunable and have narrow emission.
Assuntos
Nanopartículas , Polímeros , Animais , Compostos de Cálcio , Camundongos , Camundongos Endogâmicos DBA , Nanopartículas/química , Óxidos , Titânio , Água/químicaRESUMO
Responsive polymer materials can adapt to surrounding environments, regulate transport of ions and molecules, change wettability and adhesion of different species on external stimuli, or convert chemical and biochemical signals into optical, electrical, thermal and mechanical signals, and vice versa. These materials are playing an increasingly important part in a diverse range of applications, such as drug delivery, diagnostics, tissue engineering and 'smart' optical systems, as well as biosensors, microelectromechanical systems, coatings and textiles. We review recent advances and challenges in the developments towards applications of stimuli-responsive polymeric materials that are self-assembled from nanostructured building blocks. We also provide a critical outline of emerging developments.
Assuntos
Polímeros , Técnicas Biossensoriais , Portadores de Fármacos/química , Portadores de Fármacos/metabolismo , Modelos Moleculares , Nanopartículas/química , Polímeros/química , Polímeros/metabolismo , Propriedades de SuperfícieRESUMO
The layer-by-layer assembly of poly(diallyldimethylammonium chloride) and poly(sodium 4-styrenesulfonate) is studied on templates with imprinted arrays of microwells ranging from 2 to 25 µm and different aspect ratios. The thickness and microstructure of polyelectrolyte multilayers (PEMs) are measured using scanning electron microscopy. At 0.2 M ionic strength, the PEM film evenly coats the template both inside and outside the microwells. If the film is thinner than the critical value of about 400 nm, PEM microstructures collapse upon dissolving the template. Euler's model of critical stress is used to describe the collapse. At 2 M ionic strength, a substantially thinner PEM film is assembled inside the 25 µm wells than outside. If the well diameter is reduced to 7 and 2 µm, a much thicker PEM film is formed inside the microwells. These observations have been attributed to the changing of polyelectrolyte conformation in the solutions.
Assuntos
Polietilenos/síntese química , Poliestirenos/síntese química , Compostos de Amônio Quaternário/síntese química , Eletrólitos/síntese química , Eletrólitos/química , Tamanho da Partícula , Polietilenos/química , Poliestirenos/química , Compostos de Amônio Quaternário/química , Propriedades de SuperfícieRESUMO
The original theoretical model of polyelectrolyte adsorption onto water-dispersed colloid particles is extended to the system of polydisperse droplets of sunflower oil. Polycation (poly(allylamine hydrochloride)) and polyanion (poly(sodium 4-styrenesulfonate)) are taken in the theoretically projected concentrations to perform Layer-by-Layer assembly of a multilayer shell on the surface of oil droplets preliminary stabilized with a protein emulsifier (bovine serum albumin). The velocity of gravitational separation in suspension of encapsulated oil droplets is theoretically predicted and experimentally measured depending on the coating shell's thickness, aiming to clarify the mechanism to control over the separation process. Combining the theory and experimental data, the mass density of a polyelectrolyte multilayer shell assembled in a Layer-by-Layer fashion is obtained. Polyelectrolyte multilayer coated oil droplets are characterized by means of ζ-potential, and particle size measurements, and visualized by scanning electron microscopy.
Assuntos
Cápsulas/química , Óleos/química , Poliaminas/química , Polímeros/química , Ácidos Sulfônicos/química , Água/química , Animais , Bovinos , Cinética , Modelos Teóricos , Soroalbumina Bovina/químicaRESUMO
This work demonstrated for the first time the synthesis of novel chlorhexidine particles containing strontium and zinc, to provide an effective, affordable, and safe intervention in the treatment of recurrent infections found in Medicine and Dentistry. The CHX-SrCl2 and CHX-ZnCl2 particles were synthesized by co-precipitation of chlorhexidine diacetate (CHXD) and zinc chloride or strontium chloride, where particle size was manipulated by controlling processing time and temperature. The CHX-ZnCl2 and CHX-SrCl2 particles were characterized using SEM, FTIR, and XRD. UV-Vis using artificial saliva (pH 4 and pH 7) was used to measure the drug release and ICP-OES ion release. The antibacterial properties were examined against P. gingivalis, A. actinomycetemcomitans, and F. nucleatum subsp. Polymorphum, and cytotoxicity was evaluated using mouse fibroblast L929 cells. The novel particles were as safe as commercial CHXD, with antibacterial activity against a range of oral pathogens. UV-Vis results run in artificial saliva (pH 4 and pH 7) indicated a higher release rate in acidic rather than neutral conditions. The CHX-ZnCl2 particles provided the functionality of a smart Zinc and CHX release, with respect to environmental pH, allowing responsive antibacterial applications in the field of medicine and dentistry.
RESUMO
Focused ultrasound (FU) is in demand for clinical cancer therapy, but the possible thermal injury to the normal peripheral tissues limits the usage of the ablative FU for tumors with a large size; therefore research efforts have been made to minimize the possible side effects induced by the FU treatment. Non-ablative focused ultrasound assisted chemotherapy could open a new avenue for the development of cancer therapy technology. Here, low intensity focused ultrasound (LIFU) for controlled quick intracellular release of small molecules (Mw ≤ 1000 Da) without acute cell damage is demonstrated. The release is achieved by a composite poly(allylamine hydrochloride) (PAH)/poly-(sodium 4-styrenesulfonate) (PSS)/SiO2 microcapsules which are highly sensitive to LIFU and can be effectively broken by weak cavitation effects. Most PAH/PSS/SiO2 capsules in B50 rat neuronal cells can be ruptured and release rhodamine B (Rh-B) into the cytosol within only 30 s of 0.75 W cm-2 LIFU treatment, as demonstrated by the CLSM results. While the same LIFU treatment shows no obvious damage to cells, as proved by the live/dead experiment, showing that 90% of cells remain alive.