Role of Gastrointestinal Microbiota from Crucian Carp in Microbial Transformation and Estrogenicity Modification of Novel Plastic Additives.

Ingestion is a major exposure route for hydrophobic organic pollutants in fish, but the microbial transformation and estrogenic modification of the novel plastic additives by the gut microbiota of fish remain obscure. Using an in vitro approach, we provide evidence that structure-related transformation of various plastic additives by the gastric and intestinal (GI) microbiota from crucian carp, with the degradation ratio of bisphenols and triphenyl phosphate faster than those of brominated compounds. The degradation kinetics for these pollutants could be limited by oxygen and cometabolic substrates (i.e., glucose). The fish GI microbiota could utilize the vast majority of carbon sources in a Biolog EcoPlate, suggesting their high metabolic potential and ability to transform various organic compounds. Unique microorganisms associated with transformation of the plastic additives including genera of Citrobacter, Klebsiella, and some unclassified genera in Enterobacteriaceae were identified by combining high-throughput genetic analyses and metagenomic analyses. Through identification of anaerobic transformation products by high-resolution mass spectrometry, alkyl-cleavage was found the common transformation mechanism, and hydrolysis was the major pathway for ester-containing pollutants. After anaerobic incubation, the estrogenic activities of triphenyl phosphate and bisphenols A, F, and AF declined, whereas that of bisphenol AP increased.

EFTUD2 gene deficiency disrupts osteoblast maturation and inhibits chondrocyte differentiation via activation of the p53 signaling pathway.

BACKGROUND: Mandibulofacial dysostosis with microcephaly (MFDM) is characteristic of multiple skeletal anomalies comprising craniofacial anomalies/dysplasia, microcephaly, dysplastic ears, choanal atresia, and short stature. Heterozygous loss of function variants of EFTUD2 was previously reported in MFDM; however, the mechanism underlying EFTUD2-associated skeletal dysplasia remains unclear. RESULTS: We identified a novel frameshift variant of EFTUD2 (c.1030_1031delTG, p.Trp344fs*2) in an MFDM Chinese patient with craniofacial dysmorphism including ear canal structures and microcephaly, mild intellectual disability, and developmental delay. We generated a zebrafish model of eftud2 deficiency, and a consistent phenotype consisting of mandibular bone dysplasia and otolith loss was observed. We also showed that EFTUD2 deficiency significantly inhibited proliferation, differentiation, and maturation in human calvarial osteoblast (HCO) and human articular chondrocyte (HC-a) cells. RNA-Seq analysis uncovered activated TP53 signaling with increased phosphorylation of the TP53 protein and upregulation of five TP53 downstream target genes (FAS, STEAP3, CASP3, P21, and SESN1) both in HCO and in eftud2-/- zebrafish. Additionally, inhibition of p53 by morpholino significantly reduced the mortality of eftud2-/- larvae. CONCLUSIONS: Our results confirm a novel de novo variant of the EFTUD2 gene and suggest that EFTUD2 may participate in the maturation and differentiation of osteoblasts and chondrocytes, possibly via activation of the TP53 signaling pathway. Thus, mutations in this gene may lead to skeletal anomalies in vertebrates.

Comparison of the clinical outcomes of percutaneous vertebroplasty vs. kyphoplasty for the treatment of osteoporotic Kümmell's disease:a prospective cohort study.

BACKGROUND: Percutaneous vertebroplasty (PVP) and percutaneous kyphoplasty (PKP) are widely used in the treatment of Kümmell's disease. The purpose of this article is to investigate the clinical efficacy of PVP and PKP for Kümmell's disease. METHODS: The clinical data that 56 cases of Kümmell's disease treated with either PVP (28 cases) or PKP (28 cases) from December 2015 to December 2017 were prospectively analyzed. Gender, age, course of disease, injury segment, bone mineral density (BMD), visual analogue scale (VAS), Oswestry disability index (ODI), imaging measurement indexes before surgery between the two groups showed no significant difference (all P > 0.05). The bone cement leakage rate, bone cement injection amount, operation time, VAS, ODI, the rate of vertebral compression, correction rate of kyphosis and refracture rate of adjacent vertebra in 2 years were compared between the two groups to calculate clinical efficacy. RESULTS: The two groups were followed up for 24-48 months. There was no significant difference in the follow-up time, amount of bone cement injected, incidence of bone cement leakage and refracture rate of adjacent vertebrae between the two groups (all P > 0.05). The operation time, intraoperative blood loss and fluoroscopy times of the PVP group were significantly lower than those of the PKP group (all P = 0.000). VAS score and ODI of the two groups were significantly lower at 1 day, 1 year and 2 years after surgery than before surgery (all P < 0.05), but there was not statistically significant difference between the two groups at each time point after surgery (all P > 0.05). The rate of vertebral compression and kyphosis correction in the two groups were significantly corrected (P < 0.05, respectively) and decreased significantly with time (all P < 0.05), But there was not significant difference between the two groups at any time point (all P > 0.05). CONCLUSION: Both PVP and PKP can achieve similar effects in the treatment of Kümmell's disease. Because the cost, operation time, blood loss, radiation exposure and surgical procedure of PVP are less than those of PKP, PVP has more clinical priority value.

The interactions between microplastic polyvinyl chloride and marine diatoms: Physiological, morphological, and growth effects.

Microplastics are identified as a great threat to marine environments. However, knowledge of their impacts on phytoplankton, especially for the diatoms is scarce. Herein, the effects of different polyvinyl chloride (PVC) microplastic concentrations and contact times (24, 48, 72 and 96 h) on the Fv/Fm and cell density of Phaeodactylum tricornutum (B255), Chaetoceros gracilis (B13) and Thalassiosira sp. (B280) were investigated to evaluate the toxic effects of microplastics on marine diatoms. The effects of PVC microplastics on the morphology of the diatoms was observed by SEM. The order of sensitivity to 1 µm PVC microplastics among three marine diatoms was B13 > B280 > B255, showing that the toxic effects varied with different microalgae species. Furthermore, the presence of a siliceous cell wall played a minimal role in protecting cells from the physical attack of PVC microplastics, with no significant difference from the common cell wall. PVC microplastics caused dose-dependent adverse effects on three marine diatoms. High PVC concentrations (200 mg/L) reduced the chlorophyll content, inhibited Fv/Fm, and affected the photosynthesis of three marine diatoms. The PVC microplastics adsorbed and caused physical damage on the structure of algal cells. Interactions between PVC microplastics and diatoms may be the probable reason for the negative effects of PVC on diatoms.

Microplastics in the Coral Reef Systems from Xisha Islands of South China Sea.

The impacts of microplastics on coral reefs are gaining attention due to findings that microplastics affect coral health. This work investigated the distribution and characteristics of microplastics in the seawater, fish, and corals in 3 atolls from the Xisha Islands of South China Sea. In the seawater samples, microplastics were detected in the outer reef slopes, reef flats, and lagoons with abundances ranging from 0.2 to 11.2, 1.0 to 12.2, and 1.0 to 45.2 items L-1, respectively. Microplastic abundance was 0-12.0 items individual-1 (0-4.7 items g-1) in fish and 1.0-44.0 items individual-1(0.02-1.3 items g-1) in coral. The predominant shape and polymer of microplastics in seawater, fish, and coral were fibrous rayon and polyethylene terephthalate (PET). Microplastic sizes primarily ranged from 20-330 µm in both the seawater and fish, while there were relatively more 1-5 mm microplastics in the corals. The shape, size, color, and polymer type distribution patterns of microplastics in seawater more closely resembled those in fish gills than those in fish gastrointestinal tracts or coral samples. This study shows that microplastics are abundant in these coral reef systems and they are captured by fish or "trapped" by corals.

An integrated measurement of six response performance indicators for lead ion-selective electrodes and application.

A heavy metal ion-selective electrode (ISE) with highly multiple response performances, rather than a high single response performance, is needed urgently for in situ, real-time environmental monitoring. In this study, we present an integrated measurement of six response performance variables such as the response slope, selectivity, dynamical range, detection limit, response time, and lifetime. They are selected and used as the indicators of the quality assessment for Pb2+-ISEs. The measurement, named as electrode comprehensive quality index (IECQ), is a single number for a given ISE. The comprehensive qualities of 114 Pb2+-ISEs reported in the literature were evaluated through the index method. Twenty-one Pb2+-ISEs-based polymer membrane with top 3 IECQ values for seven different properties have been recommended by evaluating and screening of the electrodes. Five Pb2+-ISEs-based polymer membrane with the best single response performance were also provided. The recommended Pb2+-ISEs, along with the corresponding Pb2+-ISEs with the miniaturized configurations, will provide helpful guideline for the application of Pb2+-ISE with highly multiple response performances in real-time environmental monitoring.

Comparative evaluation of the vertical fracture resistance of endodontically treated roots filled with Gutta-percha and Resilon: a meta-analysis of in vitro studies.

BACKGROUND: Teeth treated endodontically are more susceptible to vertical root fracture (VRF). Some studies have suggested that obturating the root canals with Gutta-percha or Resilon can reinforce endodontically treated teeth, but a few others have presented conflicting results. These inconsistent results cannot guide clinicians in determining clinical approaches. The objective of this meta-analysis is to evaluate and compare the vertical fracture resistance of endodontically treated root canals obturated with Gutta-percha/AH plus and the Resilon system. METHODS: Comprehensive literature searches were performed in the PubMed, Cochrane Library, ScienceDirect, Web of Science and Embase databases. The titles and abstracts of all of the retrieved articles were independently assessed by two authors according to predefined selection criteria. Data in the included articles were independently extracted. Statistical analyses were conducted using Review Manager 5.3 and Stata 12.0 software. The pooled standardized mean differences (SMDs) with 95% confidence intervals (CIs) were calculated for the outcome indicators. The level of statistical significance was set at p < 0.05. The Cochran Q test (I2 test) was used to test for heterogeneity among studies. RESULTS: Fourteen randomized controlled in vitro trials were included in the meta-analysis. The results demonstrated that the vertical root fracture resistance of unprepared and unfilled roots was significantly higher than that of roots obturated with Gutta-percha/AH plus (SMD = - 0.69, 95% CI = - 1.34 to - 0.04, p = 0.04) or the Resilon system (SMD = - 0.54, 95% CI = - 1.07 to - 0.00, p = 0.05). The differences in fracture resistance between the roots filled with Gutta-percha/AH plus and the prepared unfilled root canals was not significant (SMD = 0.59, 95% CI = - 0.02 to 1.21, p = 0.06). Roots obturated with Resilon had higher fracture resistance than instrumented unfilled roots (SMD = 0.83, 95% CI = 0.44 to 1.22, p < 0.0001) or roots filled with Gutta-percha/AH plus (SMD = 0.62, 95% CI = 0.01 to 1.23, p = 0.05). CONCLUSIONS: The present study suggests that filling with Gutta-percha/AH plus dose not reinforce endodontically treated roots, whereas obturating with the Resilon system can increase vertical root fracture resistance of prepared roots. As this meta-analysis was based on in vitro studies, it should be careful to extrapolate its conclusion to the clinical context.

Effects of coating spherical iron oxide nanoparticles.

We investigate the effect of several coatings applied in biomedical applications to iron oxide nanoparticles on the size, structure and composition of the particles. The four structural techniques employed - TEM, DLS, VSM, SAXS and EXAFS - show no significant effects of the coatings on the spherical shape of the bare nanoparticles, the average sizes or the local order around the Fe atoms. The NPs coated with hydroxylmethylene bisphosphonate or catechol have a lower proportion of magnetite than the bare and citrated ones, raising the question whether the former are responsible for increasing the valence state of the oxide on the NP surfaces and lowering the overall proportion of magnetite in the particles. VSM measurements show that these two coatings lead to a slightly higher saturation magnetization than the citrate. This article is part of a Special Issue entitled "Science for Life" Guest Editor: Dr. Austen Angell, Dr. Salvatore Magazù and Dr. Federica Migliardo.

Occurrence of microplastics in the Haima cold seep area of the South China Sea.

The pollution of deep-sea microplastics has received increasing attention. As a special ecosystem in the deep sea, the cold seep area is of great significance for studying the distribution of microplastics in the deep sea. In this work, the distribution and characteristics of microplastics in seawater, sediments, and shellfish in the Haima cold seep area and the correlation between the characteristics of microplastics in different media and the type of media were studied. Microplastics were found in all three media. The abundance of microplastics in different samples from the Haima cold seep area ranged 1.8-3.8 items/L for the seawater, 11.47-96.8 items/kg (d.w.) for the surface sediments, and 0-5 items/individual (0-0.714 items/g) for the shellfish. The amount of microplastics ingested by shellfish varied among different species. The microplastics in these three media were mainly fibrous, dark-colored, small-sized rayon, polyethylene terephthalate (PET), and polyethylene (PE). In the correlation analysis of microplastic characteristics among the three media, it was found that the characteristics of microplastics in different media in the same area were closely related, and each pair of variables showed a significant positive correlation (P ≤ 0.05). The distinctive geographical conditions would accelerate the interchange of microplastics among various media. Principal component analysis showed that habitat contribute to microplastic feature differences in shellfish. Differences in correlation were observed between the characteristics of shellfish microplastics in different regions and the characteristics of microplastics in surrounding seawater and sediments.

Elder fish means more microplastics? Alaska pollock microplastic story in the Bering Sea.

Marine microplastics are an increasingly big concern. We analyze the occurrence of microplastics in Alaska pollock (Gadus chalcogrammus) across 2+ to 12+ ages sampled from the Bering Sea. Results show that 85% of the fish have ingested microplastics and elder fish ingest more with over a third of microplastics in the 100- to 500-micrometer size range, indicating the prevalence of microplastics in Alaska pollock distributed in the Bering Sea. A positive linear relationship is obtained between fish age and microplastic size. Meanwhile, the number of polymer types increases in elder fish. The link between microplastic characteristics in Alaska pollock and the surrounding seawater suggests an extended spatial impact of microplastics. The impact of age-related microplastic ingestion on the population quality of Alaska pollock is still unknown. Therefore, we need to further investigate the potential impact of microplastics on marine organisms and the marine ecosystem, taking age as an important factor.

Linking the physical and chemical characteristics of single small microplastics or nanoplastics via photolithographic silicon substrates.

Small microplastics and nanoplastics are of growing concern as they pose more risks to ecological and human health than larger particles. However, characterization of the morphological and chemical features of single particles faces a major challenge if instrumental combination is not available. Here, we developed a marker system via computer aided design and crafted it on a silicon substrate (8 × 8 mm) via direct-write lithography. We dripped 20 µL of a solution containing tiny particles extracted from a highly weathered plastic fragment onto a silicon substrate. After the solution was oven-dried, the polymer composition of particles down to 895 nm was located via multiple markers and identified using micro-Raman. The lithographic substrate was then transferred to a scanning electron microscope with energy dispersive spectroscopy capability, and the surface morphology and element distribution were captured for the same particle. Similarly, the morphology and surface elevation were characterized using a scanning electron microscope and an atomic force microscope. The average retrieval rate for particles reached 86% if all characterization experiments were conducted within one week. Our results suggest that photolithographic silicon substrates provide a novel and economical way to link the physicochemical characteristics of small microplastics and parts of nanoplastics.

Microplastics in global bivalve mollusks: A call for protocol standardization.

A growing body of evidence shows that microplastic pollution is ubiquitous in bivalve mollusks globally and is of particular concern due to its potential impact on human health. However, non-standardized sampling, processing, and analytical techniques increased the difficulty of direct comparisons among existing studies. Based on 61 peer-reviewed papers, we summarized the current knowledge of microplastics in bivalve mollusks globally and provided an in-depth analysis of factors affecting the outcome of microplastic data, with the main focus on the effects of different species and methodologies. We found no significant differences in microplastic abundance among genera from the same family but significant differences among bivalve families, indicating habitats play an important role in microplastic ingestion by bivalve mollusks. This also provided foundational knowledge for using epifaunal and infaunal bivalves to monitor microplastic pollution in water and sediment, respectively. Recommendations for microplastic monitoring protocol in bivalve mollusks were proposed according to the results of this review, covering (i) a sample size of at least 50 bivalves in the study area, (ii) the use of 10 % KOH as the digestion solution, and (iii) the pore size of a filter membrane of < 5 µm. Acknowledging the need for a standard procedure, more efforts towards protocol standardization used in long-term and large-scale microplastic monitoring programs in bivalve mollusks are needed.

Global transportation of plastics and microplastics: A critical review of pathways and influences.

The rapid development of modern society has largely increased the usage of plastic. Concerns arise when vast amount of plastic waste has been generated and disposed. The accumulated evidences suggest that plastic waste in all the natural matrixes has become a global contaminant, principles such as geological and biogeochemical cycles for plastic pollution have been proposed. Before a full estimation of plastic mass flow, however, the pathways, directions and influences involved in plastic transportation are warranted to be addressed. We made this critical review based on the quantitative and narrative approaches in plastic and microplastic sources, sinks and transportation at global and historical scales. We also addressed the roles of anthropogenic influences in the global transportation of microplastic. The hydrological, meteorological, oceanic and even biological progresses naturally influence the plastic cycle and flow directions within the Earth's Four Spheres. Anthropogenic activities participated in all sections of plastic transportation, from sources to sinks. The contribution from anthropogenic activities remains unknown but several point sources including primary emissions and landfills have been confirmed. The primary outcomes point out that plastic pollution is highly complex issues in terms of natural and human-driven dynamics. We suggested that more efforts were needed in seeking the key sections in plastic transportation between environmental compartments at a global scale.

Atmospheric microplastics in the Northwestern Pacific Ocean: Distribution, source, and deposition.

Microplastic pollution is recognized as a ubiquitous global issue. However, limited information is available concerning microplastics in the marine air. Here we present the occurrence and distribution of atmospheric microplastics in the Northwestern Pacific Ocean, with abundance ranging from 0.0046 to 0.064 items/m3. The microplastics were in various shapes and polymer types, of which fibrous rayon (67%) and polyethylene terephthalate (PET, 23%) accounted for the majority. The atmospheric microplastics in the pelagic area showed higher abundance and smaller size compared to those in the nearshore area, indicating smaller-sized microplastics in the atmosphere might travel long distances over the ocean. The atmospheric microplastic distribution was not only affected by weather conditions but might also be related to the microplastic sources. The microplastic polymer types combined with the backward trajectory model analysis showed that atmospheric microplastics in the Northwestern Pacific Ocean mainly originated from the land and the adjacent oceanic atmosphere. Spearman's correlation coefficient of the relationship between the features of microplastics in the atmosphere and surface seawater tended to increase with increasing offshore distances. Our field-based research revealed that atmospheric microplastics were a non-negligible source of marine microplastic pollution.

Toward a long-term monitoring program for seawater plastic pollution in the north Pacific Ocean: Review and global comparison.

Through a literature survey and meta-data analysis, monitoring methods and contamination levels of marine micro- and macroplastics in seawater were compared between the North Pacific and the world's other ocean basins. The minimum cut-off size in sampling and/or analysis of microplastics was crucial to the comparison of monitoring data. The North Pacific was most actively monitored for microplastics and showed comparatively high levels in the global context, while the Mediterranean Sea was most frequently monitored for macroplastics. Of the 65 extracted mean abundances of microplastics in seawater from the North Pacific, two (3.1%) exceeded the lowest predicted no-effect concentration (PNEC) proposed thus far. However, in the context of business-as-usual conditions, the PNEC exceedance probability may be expected to reach 27.7% in the North Pacific in 2100. The abundance of marine plastics in seawater, which reflects the current pollution status and marine organisms' waterborne exposure levels, is a useful indicator for marine plastic pollution. For regional and global assessments of pollution status across space and time, as well as assessment of ecological risk, two microplastic monitoring approaches are recommended along with their key aspects. Although microplastic pollution is closely linked with macroplastics, the monitoring data available for floating macroplastics and more extent to mesoplastics in most ocean basins are limited. A more specific framework for visual macroplastic survey (e.g. fixed minimum cut-off size, along with survey transect width and length according to survey vessel class) is required to facilitate data comparison. With the implementation of standardised methods, increased efforts are required to gather monitoring data for microplastics and-more importantly-floating macroplastics in seawater worldwide.

Towards a North Pacific Ocean long-term monitoring program for plastic pollution: A review and recommendations for plastic ingestion bioindicators.

Marine debris is now a ubiquitous component of the Anthropocene global ocean. Plastic ingestion by marine wildlife was first reported in the 1960s and since that time, roughly one thousand marine species have been reported to consume this debris. This study focuses on plastic ingestion by marine invertebrates and vertebrates in the North Pacific Ocean. Specifically, we reviewed the scientific literature to assess the scope of the problem, identified key bioindicator species, and proposed guidelines for future monitoring of plastic debris in North Pacific marine ecosystems. Our meta-analysis confirmed that the North Pacific is among the most polluted ocean regions globally; roughly half of all fish and seabird specimens and more than three-quarters of sea turtles and bivalve specimens examined in this region had consumed plastic. While there are not enough standardized data to assess if these ingestion rates are changing, sampling standardization and reporting of methods are improving over time. Using a rubric-evaluation approach, we evaluated 352 species for their potential to serve as bioindicators of the prevalence of plastic pollution in the North Pacific. This analysis revealed a suite of 12 bioindicator species candidates which sample a variety of ecosystem components and cover a wide range of plastic size classes. Thus, we contend that these bioindicator candidates provide a key foundation for developing a comprehensive plastic monitoring program in the region. To enhance the utility of these bioindicators, we developed a framework for standardized data collection to minimize methodological variability across different studies and to facilitate the assessment of temporal trends over space and time. Tracking plastic ingestion by these bioindicators will help to assess the effectiveness of mitigation actions in the region, a critical step to evaluate progress towards sustainability and improved ocean health in the 21st century.

Methods for microplastic sampling and analysis in the seawater and fresh water environment.

Microplastic (plastic smaller than 5mm in size) is ubiquitous around the world both in the ocean and the freshwater system. Due to their potential serious negative impact on marine organisms and human beings, marine microplastics have attracted worldwide attention in the past decade. Information and knowledge of the spatial and temporal distribution of marine microplastics are crucial for accurately assessing our current and future environmental health conditions. This is also important for developing mitigation plans and measures to protect our environment. Since the measured microplastic pollution level is closely related to the sampling methods and identification techniques, it is important to employ standardized sampling and analysis operation procedures for cross-comparison. In this chapter, we present the basic sampling, sample pretreatment and microplastic identification techniques involved in microplastic pollution assessment and discuss the adaptability of different sampling and pretreatment methods. The pros and cons of different techniques are also discussed.

A new route to select the referable values of property indicators for normalization and its application in screening polymeric membrane heavy metal (Co, Ni, and Cr)-ion-selective electrodes with multiple high-response performances.

Distance to target normalization may not be suitable to select the referable values, (RC)refer, and responsive characteristic (RC) indicators, for the electrode comprehensive quality index (IECQ). (RC)refer is selected as an excellent response property value in alliance with corresponding constants (e.g., 1.8 or 2.5) in this method. It is recently found that these constants are not appropriate to normalize indicators for other ion-selective electrodes (ISEs). The present study aimed to report a new and universal route to select good (RC)refer values for the normalization without additional constants by only controlling the mean value ([Formula: see text]) being 0.90 < [Formula: see text] < 1.1. The route provided reliable results of both (RC)refer for indicator normalization and IECQ values. It has been successfully applied to select the referable values (RC)refer of each indicator for the IECQ of three heavy metal (HM) (Co, Ni, and Cr)-ISEs. The second aim of the work is to screen these heavy metal-ion-selective electrodes (HM-ISEs) with highly multiple response properties by using the IECQ. Twenty-four HM-ISEs with the top 3 IECQ values have been recommended. For example, the largest IECQ for three indicators, [Formula: see text], PS, and PRT, which was used as the main indicator (MI), was 1.461 for Co2+-ISE, 1.385 for Ni2+-ISE, and 1.561 for Cr3+-ISE, respectively. The results will be beneficial to meeting the special requirements to monitor/analyze HM ions in different water samples.

Microplastics in four bivalve species and basis for using bivalves as bioindicators of microplastic pollution.

Microplastics in bivalves have caused widespread concern due to their potential health risk to humans. In this study, microplastics in the digestive systems of four locally cultured bivalve species (scallop Chlamys farreri, mussel Mytilus galloprovincialis, oyster Crassostrea gigas, and clam Ruditapes philippinarum) in Qingdao, China, were analyzed and detected in 233 out of 290 bivalve samples (80%) over four seasons. The microplastic abundance in four species of bivalves ranged between 0.5 and 3.3 items/individual or 0.3 and 20.1 items/g wet weight digestive system, with significant species-specific and region-specific differences but no season-specific differences. Microfiber was the most predominant shape of all microplastics found. Eighteen types of polymer with diameters between 7 and 5000 µm were identified by µ-FT-IR (505 of 587 suspected items identified as microplastics) with polyvinyl chloride (PVC) and rayon being the most abundant ones. Bivalves collected in summer contained more larger-sized microplastics. R. philippinarum accumulated more smaller-sized microplastics and showed different microplastic features compared with the other three species of bivalves. By comparing and analyzing the microplastic polymer types between each bivalve species and the ambient environment, microplastic in clam can best reflect the variability of microplastic polymer types in sediment among different areas. Mussels can reflect the variability of microplastic polymer types in water to an extent. Therefore, clam and mussel are recommended to serve as bioindicators for microplastic pollution in the sediment and water, respectively. The occurrence of microplastics pollution in bivalves worldwide is wide, and bivalves can act as the transporter of microplastics to humans. Our results suggest that bivalves have an important role as environmental bioindicators and the pollution of microplastics in bivalves needs attention.

New insights into the toxic interactions of polyvinyl chloride microplastics with bovine serum albumin.

The binding interaction between emerging pollutant polyvinyl chloride microplastics (PVC MPs) and bovine serum albumin (BSA) was studied by fluorescence spectroscopy, resonance scattering spectroscopy (RLS), UV-visible (UV-vis) absorption spectroscopy, circular dichroism (CD), and Fourier transform infrared (FT-IR) spectroscopy under simulative physiological conditions. Fluorescence results revealed that the fluorescence quenching of BSA induced by PVC MPs was originated from the formation of BSA-PVC complex in static quenching mode. According to Stern-Volmer equation, the binding constants (Ka) between PVC MPs and BSA at different temperatures were obtained, and the number of binding sites was 1.62. The thermodynamic parameters, enthalpy change (ΔH), entropy change (ΔS), and free energy change (ΔG) were calculated to be - 41.77 kJ mol-1, 43.17 J mol-1 K-1, and - 54.63 kJ mol-1 via Van't Hoff equation, indicating electrostatic interaction played a key role in the formation of BSA-PVC complex spontaneously. In addition, the alterations of microenvironment and secondary structure in BSA induced by PVC MPs were further confirmed by synchronous fluorescence spectra, UV-vis, FT-IR, and CD. This work not only provides further information for better understanding the binding interaction of PVC MPs with BSA, but also elucidates the potential biological toxicity of MPs at a molecular level.