Effects of Printing Parameters on Properties of FDM 3D Printed Residue of Astragalus/Polylactic Acid Biomass Composites.

In order to develop a new kind of filament material for the fused deposition modeling (FDM) 3D printing, the residue of Astragalus (ROA), one of the most important Chinese herbal medicines, and polylactic acid were chosen as the raw materials to FDM 3D print biomass composite specimens, the effects of the printing parameters on the properties of the specimens were investigated. The results indicated that the mechanical properties and thermal stability of the printed specimen were affected obviously by the parameters while the melting and crystallization behavior of the specimens were little affected. For the wettability, it was also little affected by the printing parameter except for the printing speed. Increasing the printing temperature and the filling density or reducing the printing speed and the layer thickness could improve both the mechanical properties and the thermal stability of the FDM 3D printed PLA/ROA composite specimen; reducing the deposition angle could also improve the mechanical properties while having little effect on the thermal stability of the specimen.

Preparation and identification of chicken egg yolk immunoglobulins against human enterovirus 71 for diagnosis of hand-foot-and-mouth disease.

Human enterovirus 71 (EV71) is one of the major pathogens that causes hand-foot-and mouth disease, and there is an urgent need for rapid diagnosis of EV71 virus infection for early antiviral treatment. The aim of this study was to prepare chicken egg yolk immunoglobulin Y (IgY) for the diagnosis of enterovirus type 71 infection. The antibodies were raised by intramuscular immunization of laying hens with inactivated human EV71 and isolated from the egg yolk by multiple steps of polyethylene glycol 6000 extraction. The average concentration of IgY antibody was 26.60 mg/mL during the whole immunization. After the first immunization, the IgY titer gradually increased, and reached the peak on the 55th days. Meanwhile, the use of western blotting test demonstrated that specific IgY binds specifically to capsid proteins VP2 and VP3 of EV71 virus. Furthermore, a facile one-step method based on turn-on fluorescence sensing was developed by using IgY antibodies, which can detect EV71 virus at low concentrations of 104 PFU/mL and was 94.44% coincidence with RT-PCR in 30 clinical samples. These findings indicate that EV71-IgY antibodies are an easily prepared and rich source of antibodies that offers a potential alternative strategy for routine screening of EV71 infection.

Simultaneous Preparation of Salidroside and p-Tyrosol from Rhodiola crenulata by DIAION HP-20 Macroporous Resin Chromatography Combined with Silica Gel Chromatography.

The Rhodiola species have a long history of utilization in traditional medicine and have been considered as a source of adaptation to environmental challenges; salidroside and p-tyrosol are the major responsible compounds. Here we propose a novel UPLC-guided two-step method consisting of a DIAION HP-20 adsorption and silica gel column chromatographies, which can simultaneously prepare high purities of salidroside and p-tyrosol with noticeable yields from the rhizome of Rhodiola crenulata. Results demonstrated that DIAION HP-20 could successfully remove all impurities except crenulatin during a gradient elution with 5⁻20% ethanol, which could achieve an optimal purification of salidroside and p-tyrosol with increasing rates of 29.19% and 33.44%, respectively. Furthermore, chloroform was selected as an ideal solvent for separating p-tyrosol with salidroside, and thus crenulatin was subsequently applied in the silica gel chromatography, and the separation of salidroside with crenulatin could be achieved using silica gel chromatography with a mixture of chloroform and methanol at a volume ratio of 4:1. High purity rates of 94.17% and 97.29% and overall yields of 39.09% and 43.73% for salidroside and p-tyrosol were simultaneously achieved. Our method provides a new way to simultaneously obtain salidroside and p-tyrosol from R. Crenulata, as well as other related plant species.

Tracing the Century-Long Evolution of Microplastics Deposition in a Cold Seep.

Microplastic (MP) pollution is one of the greatest threats to marine ecosystems. Cold seeps are characterized by methane-rich fluid seepage fueling one of the richest ecosystems on the seafloor, and there are approximately more than 900 cold seeps globally. While the long-term evolution of MPs in cold seeps remains unclear. Here, how MPs have been deposited in the Haima cold seep since the invention of plastics is demonstrated. It is found that the burial rates of MPs in the non-seepage areas significantly increased since the massive global use of plastics in the 1930s, nevertheless, the burial rates and abundance of MPs in the methane seepage areas are much lower than the non-seepage area of the cold seep, suggesting the degradation potential of MPs in cold seeps. More MP-degrading microorganism populations and functional genes are discovered in methane seepage areas to support this discovery. It is further investigated that the upwelling fluid seepage facilitated the fragmentation and degradation behaviors of MPs. Risk assessment indicated that long-term transport and transformation of MPs in the deeper sediments can reduce the potential environmental and ecological risks. The findings illuminated the need to determine fundamental strategies for sustainable marine plastic pollution mitigation in the natural deep-sea environments.

Photoredox-Mediated Designing and Regulating Metal-Coordinate Hydrogels for Programmable Soft 3D-Printed Actuators.

Metal-organic coordination is widely applied for designing responsive polymers and soft devices. But it is still a challenge to prepare redox-responsive actuators with complicated structures, limiting their advanced applications in material and engineering fields. Here, we report a photoredox-mediated designing and regulating strategy to fabricate metal-coordinate hydrogels with the catalysis of Ru(II)/Co(III) under visible-light irradiation in seconds. Meanwhile, multiple polymer networks are formed and penetrated by each other, enabling as-prepared hydrogels excellent mechanical properties and toughness. This rapid, one-step, and controllable process is highly compatible with standard photography and printing techniques to make hierarchical 2D/3D structures. Importantly, the oxidization decomposition of Co(III) benefits the formation of cobalt cation-based redox-responsive networks, which have the potential for designing shape-memory materials and actuators by the regulation of Co3+/2+ states via tuning redox environmental conditions. As a proof-of-concept, a programmable air-driven actuator is successfully demonstrated to control cargo capturing/releasing by designing complicated, asymmetric structures and optimizing their performance with the combination of a typical extrusion 3D printing approach. In this Letter, we report a simple and general metal-organic coordination strategy for designing high-performance actuators, which shows promising applications in smart soft devices and electronics.

Accumulation and Distribution of Fluorescent Microplastics in the Early Life Stages of Zebrafish.

As a new type of environmental pollutant, microplastic has been widely found in the aquatic environment and poses a high threat to aquatic organisms. The bioaccumulation of microplastics plays a key role in their toxic effects; however, as a particulate, their bioaccumulations are different from many other pollutants. Described here is a feasible method to visually determine the accumulation and distribution of microplastics in zebrafish embryos or larvae using fluorescent microplastics. Embryos are exposed to different concentrations (0.1, 1, and 10 mg/L) of fluorescent microplastics with a diameter of 500 nm for 120 h. It is shown in the results that microplastics can bioaccumulate in zebrafish embryos/larvae in a concentration-dependent manner. Before hatching, strong fluorescence is found around the embryonic chorion; while in zebrafish larvae, the yolk sac, pericardium, and gastrointestinal tract are the main accumulated sites of microplastics. The results demonstrate the uptake and internalization of microplastics in zebrafish at early life stages, which will provide basis for better understanding the impact of microplastics on aquatic animals.

Poly(γ-glutamic acid)-based electrospun nanofibrous mats with photodynamic therapy for effectively combating wound infection.

Pathogenic bacterial infections associated with wound healing progress usually result in serious complications. Herein, biocompatible and antimicrobial electrospun nanofibrous mats with photodynamic therapy (PDT) effect were fabricated to accelerate the infected wound healing. The nanofibrous mats were fabricated by co-electrospining of polyanionic poly(γ-glutamic acid) (γ-PGA) and cationic photosensitizer 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin tetra (p-toluenesulfonate) (TMPyP) in aqueous solution and stabilized by the chemical crosslinking. The as-prepared nanofibrous mats can not only confer the moist microenvironment to the wound bed, but also provide potent bactericidal activity upon visible light irradiation by releasing the cytotoxic reactive oxygen species (ROS). The antibacterial assay in vitro showed that they can effectively eradicate the board-spectrum bacteria at a relatively low loading dose of TMPyP (e.g., 0.1 wt%). Meanwhile, those nanofibrous mats showed good biocompatibility with no obvious adverse effects on mammalian cells and red blood cells (RBCs). The animal test in vivo suggested that the restrained inflammatory reaction and better wound healing could be achieved upon timely and effective antibacterial treatment with negligible local toxicities. This biocompatible and antibacterial γ-PGA-TMPyP nanofibrous mat may show great potential in practical infection-resistant applications, particularly for wound dressing applications.

The Nd:YAG Laser or Combined with Er:YAG Laser Therapy for Oral Venous Lakes.

Objective: The aim of the present study was to investigate the clinical treatment effect on oral venous lakes (OVL) treated with neodymium-doped yttrium aluminum garnet (Nd:YAG) laser or a combination of erbium-yttrium aluminum garnet (Er:YAG) laser. Patients and methods: Between June 2015 and March 2017, nine patients, suffering from OVL in the mandibular regions, were treated with Nd:YAG laser or combination of Nd:YAG laser and Er:YAG laser in our department. The Nd:YAG laser was mainly performed for the treatment of nine initial lesions. The preset parameters were as follows: average power of 5 W, frequency of 100 Hz, microshort pulse (MSP), tip size of 300 µm, spot size of 3 mm, irradiation distance of 3-4 mm, and speed of 1-2 mm/sec, sequential treatment. The power density at work was 57 W/cm2. If postoperative scars occurred after the Nd:YAG treatment, the Er:YAG laser was used. The parameters were set as follows: power of 3.75 W, energy of 150 mJ, frequency of 25 Hz, very long pulse (VLP), tip size of 0.6 mm, 40% water, and 60% gas. The patients were followed up for 4-8 weeks. The therapeutic results were graded on a 4-point scale system. Adverse effects after laser treatment were evaluated and managed accordingly. Results: With single Nd:YAG laser, the therapeutic outcome was excellent in seven patients (77.8%) and good in two patients (22.2%). Scar tissue was encountered in two patients 2 weeks after Nd:YAG laser therapy, and then Er:YAG laser was used for the scar removal. No mucosal necrosis was found in any of the patients. Conclusions: The Nd:YAG laser or combined with Er:YAG laser was an effective and safe treatment for patients with OVL in the mandibular region.

Polystyrene microplastics decrease F-53B bioaccumulation but induce inflammatory stress in larval zebrafish.

There is growing concern that microplastics (MPs), which act as carriers of other organic contaminants, are mistakenly ingested by aquatic organisms, consequently causing unpredictable adverse effects. In this study, zebrafish larvae (6 d post fertilization) were exposed to either 6:2 chlorinated polyfluorinated ether sulfonate (F-53B), polystyrene microplastics (PS-MPs) or their combination for 7 d to evaluate the effects of the presence of PS-MPs on the bioaccumulation and immunomodulation of F-53B. PS-MPs greatly promoted the sorption of F-53B, which reduced the bioavailability and bioaccumulation of F-53B in zebrafish larvae. F-53B, PS-MPs, or their mixture significantly reduced the body weight of zebrafish larvae. Combined exposure of PS-MPs and F-53B resulted in a significant reduction in superoxide dismutase (SOD) and lysozyme activity, indicating the occurrence of oxidative stress and inflammatory response in zebrafish larvae. The content of malondialdehyde (MDA) and immunoglobulin M (IgM) was not affected by F-53B or PS-MPs, but significantly increased in their combined exposure. Furthermore, co-exposure of F-53B and PS-MPs significantly upregulated the transcripts of pro-inflammatory cxcl-clc and il-1ß genes and increased the levels of iNOS protein in zebrafish larvae. In addition, enhanced protein expression of NF-κB paralleled the upregulation in the expression of most immune-related genes, suggesting NF-κB pathway was mechanistically involved in these responses. Collectively, the presence of MPs decreased F-53B bioaccumulation, but induced inflammatory stress in larval zebrafish. These findings highlight the health risks of co-contamination of MPs and F-53B in aquatic environments.

Inhibitory effects of polystyrene microplastics on caudal fin regeneration in zebrafish larvae.

Microplastic pollution is pervasive in aquatic environments, but the potential effects of microplastics on aquatic organisms are still under debate. Given that tissue damage is unavoidable in fish and the available data mostly concentrate on healthy fish, there is a large chance that the ecotoxicological risk of microplastic pollution is underrated. Therefore, in this study, the effects of microplastics on the regenerative capacity of injured fish were investigated using a zebrafish caudal fin regeneration model. After fin amputation at 72 h post fertilization, the larvae were exposed to polystyrene microplastics (0.1-10 mg/L) with diameters of 50 or 500 nm. Microplastic exposure significantly inhibited fin regeneration, both morphologically and functionally. Furthermore, the signaling networks that regulate fin regeneration, as well as reactive oxygen species signaling and the immune response, both of which are essential for tissue repair and regeneration, were altered. Transcriptomic analyses of the regenerating fin confirmed that genes related to fin regeneration were transcriptionally modulated in response to microplastic exposure and that metabolic pathways were also extensively involved. In conclusion, this study demonstrated for the first time that microplastic exposure could disrupt the regenerative capacity of fish and might eventually impair their fitness in the wild.

A Reverse Transcription-Polymerase Spiral Reaction (RT-PSR)-Based Rapid Coxsackievirus A16 Detection Method and Its Application in the Clinical Diagnosis of Hand, Foot, and Mouth Disease.

Hand, foot, and mouth disease (HFMD) is a common viral illness affecting infants and children that is usually caused by Coxsackievirus A16 (CVA-16). To diagnose HFMD, we developed a method for rapid detection of CVA-16 based on reverse transcription-polymerase spiral reaction (RT-PSR). We used two pairs of primers that specifically recognize the conserved sequences of VP1 coding region of CVA-16, and template RNA was reverse transcribed and amplified in a single tube under isothermal conditions, total reaction time could be reduced to less than 40 min. The detection limit of this method was between 2.4 × 102 and 2.4 × 101 copies/µl with excellent specificity. To test the clinical applicability of the method, 40 clinical stool samples were analyzed using RT-PSR and quantitative reverse transcription-polymerase chain reaction, and comparison showed that the coincidence rate was 100%. Compared with other similar detection methods, RT-PSR requires less time, simpler operation, and lower cost. These results prove that our novel, simple, and reliable isothermal nucleic acid testing assay has potential application for clinical detection of CVA-16.

Multiple divergent Human mastadenovirus C co-circulating in mainland of China.

The human mastadenovirus C (HAdV-C) cause respiratory infections in children. Homologous recombination was clearly involved in the molecular evolution of HAdV-A, B, and D, but little is known about the molecular evolution of HAdV-C. From 2000 to 2016, 201 HAdV-C strains were collected from nine provinces covering six administrative regions of mainland of China via 3 existing surveillance programs, namely the febrile respiratory syndrome surveillance, the acute flaccid paralysis surveillance, and the hand, foot, and mouth disease surveillance system. The genes coding for the capsid protein (penton base, hexon, and fiber) of 201 HAdV-C strains were sequenced and compared with representative sequences publicly available. In addition, the whole genome sequence of 24 representative strains of HAdV-C was generated for further recombination analysis. Phylogenetic analysis of the penton base sequences of HAdV-C revealed six genetic groups (labelled as Px1-6), which showed that the penton base had more variation than previously thought. Based on the penton base, hexon, and fiber gene sequences, 16 new genetic patterns of HAdV-C circulating in mainland of China were identified in this study. Whole genome sequence analysis revealed frequent recombination events among HAdV-C genomes. This study is highly beneficial for case classification, tracking the transmission chain, and further epidemiological exploration of HAdV-C-related severe clinical diseases in the near future. Our data demonstrated that multiple newly divergent HAdV-C co-circulated across mainland China during the research period.

The combined toxicity effect of nanoplastics and glyphosate on Microcystis aeruginosa growth.

Waste plastics can be degraded to nanoplastics (NPs, diameter<1 µm) by natural forces. NPs not only directly affect aquatic organisms but also adsorb other pollutants, causing combined pollution. Glyphosate is one of the most widely used herbicides and is commonly monitored in freshwater systems. In this study, the effects of the combined toxicity of polystyrene cationic amino-modified nanoparticles (nPS-NH2) and glyphosate on a blue-green alga, Microcystis aeruginosa, were investigated. Our results demonstrated that 5 mg/L glyphosate had a strong inhibitory effect on M. aeruginosa (the 96-h inhibitory rate was 27%), while 5 mg/L nPS-NH2 had no apparent effect on the growth of M. aeruginosa. Interestingly, nPS-NH2 combined with glyphosate showed antagonistic effects on the inhibition of algal growth because nPS-NH2 displayed a strong adsorption capacity for glyphosate, which significantly alleviated the inhibitory effect of glyphosate on M. aeruginosa growth. However, the presence of glyphosate enhanced the stability of the dispersion system, which allowed more nPS-NH2 to adsorb on the surface of M. aeruginosa and may result in greater enrichment of nPS-NH2 in the food chain to show potential repercussions to human life. Our current study provides a new theoretical basis for the combined effects of NPs and pesticide pollution.

Synthesis of silane surface modified ZnO quantum dots with ultrastable, strong and tunable luminescence.

Surface modified ZnO quantum dots (QDs) with ultrastable, strong and tunable luminescence have been successfully prepared via silanization during the growth process by (3-(2,3-epoxypropoxy)propyl)trimethoxysilane. The as-prepared ZnO QDs are demonstrated to be promising for anti-counterfeit applications in expensive high-end liquors, etc.

Predicting bioavailability and accumulation of organochlorine pesticides by Japanese medaka in the presence of humic acid and natural organic matter using passive sampling membranes.

Adsorption to dissolved organic matter (DOM) may significantly decrease the freely dissolved concentration of many hydrophobic organic compounds and, hence, result in reduced bioavailability to aquatic organisms. Here, the suitability of using triolein-embedded cellulose acetate membrane (TECAM) as a biomimetic surrogate to assess the bioavailability of organochlorine pesticides (OCPs) in water in the presence of DOM was explored. The accumulation of OCPs was measured in TECAM and pelagic Japanese medaka (Oryzias latipes) in the laboratory after 12 h exposure to water containing different levels of Aldrich humic acid. Further, OCP uptake by TECAM and medaka in real aqueous environments was evaluated after 30 d exposures in two sites. Laboratory results showed that OCP uptake by medaka consistently decreased with increasing levels of humic acid in the range of 0-15 mg C/L in sample solutions. This tendency was closely mimicked by OCP accumulation in TECAM under the same conditions. Field results showed that TECAM accumulated similar OCP patterns as medaka (r2 = 0.92 for site 1 and r2 = 0.94 for site 2), although comparison of the in-field eight OCP concentrations in TECAM to those in medaka yielded approximately a factor of 3 (on a wet weight basis). These results suggest that the TECAM method can be used as a simple and useful tool to predict the bioavailability and bioaccumulation potential of poorly biotransformed organic compounds in pelagic fish in aqueous environment.