Alveolar bone morphology in patients with palatally-displaced maxillary lateral incisors before and after orthodontic treatment: A cone-beam computed tomography study.

INTRODUCTION: Palatal displacement of maxillary anterior teeth is common in clinical practice. Previous studies have reported that the labial bone around palatally-displaced incisors is thinner than that around normally-placed teeth. Therefore, it is necessary to elucidate alveolar bone changes after alignment to guide orthodontic treatment. In this study, we investigated the alveolar bone changes around palatally-displaced maxillary lateral incisors before and after treatment, and the effects of extraction and age using cone-beam computed tomography. METHODS: In this retrospective study, 55 patients with unilateral palatally-displaced maxillary lateral incisors were included. Three-dimensional alveolar bone changes were measured at three levels (25%, 50% and 75% of the root length) using cone-beam computed tomography. Group comparisons were made between displaced and control teeth, extraction and non-extraction groups, and adult and minor groups. RESULTS: After orthodontic treatment, labiopalatal and palatal alveolar bone widths decreased at all measured levels. Labial alveolar bone width increased significantly at P25, but decreased at P75. Concavity decreased, while tooth-axis angle, tooth length, B-CEJ and P-CEJ increased. Changes in LB and LP at P75, B-CEJ and P-CEJ were statistically significant. After treatment, the tooth-axis angle on the PD side increased by 9.46°. The change in tooth-axis angle on the PD side was significantly smaller, and LB and LP decreased more at P75, in the extraction group. CONCLUSIONS: Compared to the control teeth, alveolar bone thickness and height for the displaced teeth decreased more significantly after treatment. Tooth extraction and age also influenced alveolar bone changes.

Variations in the alveolar bone morphology in maxillary molar area: a retrospective CBCT study.

BACKGROUND: This study quantitatively analyzed the anatomic structure of the alveolar bone in the maxillary molar region at three potential locations for Temporary Anchorage Device (TAD) placement. Additionally, the study compared the variability in this region across different age groups, sagittal skeletal patterns, vertical facial types, and sexes. METHODS: In this retrospective cone-beam computed tomography study, the buccal alveolar bone was analyzed in the posterior molar area of 200 patients, the measurement items include buccal alveolar bone height, alveolar bone thickness, interradicular distance, and maxillary retromolar space. RESULTS: Buccal alveolar height was greatest in the U56 region. The interradicular space was largest in the U56 region and increased from the alveolar crest to the sinus floor. Buccal alveolar bone thickness was highest in the U67 region and generally increased from the alveolar crest to the sinus floor. The maxillary retromolar space gradually increased from the alveolar crest to the root apex. CONCLUSIONS: TADs are safest when placed in the buccal area between the maxillary second premolar and the first molar, particularly at the 9 mm plane. The U67 region is the optimal safe zone for TAD placement for maxillary dentition distalization. TADs placement in adolescents can be challenging. Maxillary third molar extraction can be considered for maxillary dentition distalization.

OPN N-glycosylation promoted bone destruction.

OBJECTIVES: Exploring the role of OPN N-glycosylation in osteoblasts and osteoclasts. METHODS: Immunohistochemistry was used to detect the expression of OPN in mice with apical periodontitis. The asparagine at position 79 of the OPN protein was mutated to glutamine, and the above plasmids were transfected into osteoblasts and osteoclasts. The effect of OPN N-glycosylation on proliferation of osteoblasts and osteoclasts was detected by CCK8 assays. Western blotting was used to detect the expression of OPN N-glycosylation on osteoclasts and osteoblasts. Detection of N-glycosylation of OPN activated the NF-κB signaling pathway to regulate osteoblasts and osteoclasts. RESULTS: OPN increased the expression in a mice model of apical periodontitis. The expression curve of OPN resembled a reverse V shape. The OPN N-glycosylation site was identified as 79 by MS. N-glycosylation of OPN promoted the proliferation of osteoclasts. But the N79 glycosylation site of mutant OPN could not increase the proliferation of osteoblasts. OPN N-glycosylation modulated the expression of osteoclast- and osteoblast-associated factors through the NF-κB signaling pathway. N-glycosylation of OPN promoted nuclear translocation of NF-κB in osteoclasts and osteoblasts. CONCLUSIONS: The N-glycosylation site of OPN is 79. N-glycosylation of OPN played an important role in the biological function of OPN protein.

Progress of Nanomaterials-Based Photothermal Therapy for Oral Squamous Cell Carcinoma.

Oral squamous cell carcinoma (OSCC) is one of the top 15 most prevalent cancers worldwide. However, the current treatment models for OSCC (e.g., surgery, chemotherapy, radiotherapy, and combination therapy) present several limitations: damage to adjacent healthy tissue, possible recurrence, low efficiency, and severe side effects. In this context, nanomaterial-based photothermal therapy (PTT) has attracted extensive research attention. This paper reviews the latest progress in the application of biological nanomaterials for PTT in OSCC. We divide photothermal nanomaterials into four categories (noble metal nanomaterials, carbon-based nanomaterials, metal compounds, and organic nanomaterials) and introduce each category in detail. We also mention in detail the drug delivery systems for PTT of OSCC and briefly summarize the applications of hydrogels, liposomes, and micelles. Finally, we note the challenges faced by the clinical application of PTT nanomaterials and the possibility of further improvement, providing direction for the future research of PTT in OSCC treatment.

Analysis of facial features and prediction of lip position in skeletal class III malocclusion adult patients undergoing surgical-orthodontic treatment.

OBJECTIVES: This study presents a retrospective study aimed to analyze the facial features at each stage of surgical-orthodontic treatment for skeletal class III malocclusion, and predict the changes in the lips after treatment. MATERIALS AND METHODS: There were 49 skeletal class III malocclusion patients treated with bimaxillary surgery and orthodontic treatment enrolled in this study. Lateral cephalograms were obtained before treatment (T0), 1 month before surgery (T1), 1 month after surgery (T2), and after debonding (T3) for cephalometric measurements. After the measurement of the required variables, paired t-test, Pearson's correlation analysis, and multiple linear regression were performed using SPSS 19.0. RESULTS: The main factors associated with changes in the upper lip included ΔUIE-V, ΔA-V, ΔU1A-V, and ΔL1A-V, and those associated with changes in the lower lip included ΔLIE-V, ΔL1A-V, ΔB-V, ΔPog-V, and Δfacial angle. The predicted regression equation for the horizontal change in the upper lip was represented as ΔUL-vertical reference line (VRL) = 9.430 + 0.779 (ΔUIE-VRL) - 0.542(VULT) (P < 0.05) with a mean error of 1.04 mm; the corresponding equation for the lower lip was ΔLL-VRL = -1.670 + 0.530 (ΔB-VRL) + 0.360 (Ls-E) + 0.393 (ΔLIE-VRL) (P < 0.05), with a mean error of 1.51 mm. CONCLUSIONS: This study explored the relationship between orthognathic surgery and changes in the lips and obtained the predictive equations of lip position after treatment by using multiple linear regression, which likely offers a reference for prediction of soft tissue changes before surgical-orthodontic treatment in patients with skeletal class III malocclusion. CLINICAL RELEVANCE: The findings can help dentists to rapidly predict the lip changes after surgical-orthodontic treatment in patients with skeletal class III malocclusion. The study has been registered with the Chinese Clinical Trial Registration (No: ChiCTR1800017694).

Lysine demethylase 3A promotes chondrogenic differentiation of aged human dental pulp stem cells.

Background/purpose: Aging severely impairs the beneficial effects of human dental pulp stem cells (hDPSCs) on cartilage regeneration. Lysine demethylase 3A (KDM3A) is involved in regulating mesenchymal stem cells (MSCs) senescence and bone aging. In this study, we investigated the role of KDM3A in hDPSCs aging and whether KDM3A could rejuvenate aged hDPSCs to enhance their chondrogenic differentiation capacity. Materials and methods: The cellular aging of hDPSCs was evaluated by senescence-associated ß-galactosidase (SA-ß-gal) staining. Protein levels were determined using Western blot analysis. KDM3A was overexpressed in aged hDPSCs by lentivirus infection. Quantitative reverse-transcription polymerase chain reaction (RT-qPCR) were used to determine the mRNA levels of stemness markers. Toluidine blue staining was used to evaluate the effect of KDM3A overexpression on the chondrogenic differentiation of aged hDPSCs. Results: hDPSCs at passage 12 or treated with etoposide exhibited augmented cellular senescence as evidenced by increased SA-ß-gal activity. KDM3A was significantly increased during senescence of hDPSCs. Overexpression of KDM3A did not affect the stemness properties but significantly promoted the chondrogenic differentiation of aged hDPSCs. Conclusion: Our findings indicate that KDM3A plays an important role in the maintenance of the chondrogenic differentiation capacity of aged hDPSCs and suggest that therapies targeting KDM3A may be a novel strategy to rejuvenate aged hDPSCs.

Lysine 68 Methylation-Dependent SOX9 Stability Control Modulates Chondrogenic Differentiation in Dental Pulp Stem Cells.

Dental pulp stem cells (DPSCs), characterized by easy availability, multi-lineage differentiation ability, and high proliferation ability, are ideal seed cells for cartilage tissue engineering. However, the epigenetic mechanism underlying chondrogenesis in DPSCs remains elusive. Herein, it is demonstrated that KDM3A and G9A, an antagonistic pair of histone-modifying enzymes, bidirectionally regulate the chondrogenic differentiation of DPSCs by controlling SOX9 (sex-determining region Y-type high-mobility group box protein 9) degradation through lysine methylation. Transcriptomics analysis reveals that KDM3A is significantly upregulated during the chondrogenic differentiation of DPSCs. In vitro and in vivo functional analyses further indicate that KDM3A promotes chondrogenesis in DPSCs by boosting the SOX9 protein level, while G9A hinders the chondrogenic differentiation of DPSCs by reducing the SOX9 protein level. Furthermore, mechanistic studies indicate that KDM3A attenuates the ubiquitination of SOX9 by demethylating lysine (K) 68 residue, which in turn enhances SOX9 stability. Reciprocally, G9A facilitates SOX9 degradation by methylating K68 residue to increase the ubiquitination of SOX9. Meanwhile, BIX-01294 as a highly specific G9A inhibitor significantly induces the chondrogenic differentiation of DPSCs. These findings provide a theoretical basis to ameliorate the clinical use of DPSCs in cartilage tissue-engineering therapies.

Mechanically Robust Hydrogels Facilitating Bone Regeneration through Epigenetic Modulation.

Development of artificial biomaterials by mimicking extracellular matrix of bone tissue is a promising strategy for bone regeneration. Hydrogel has emerged as a type of viable substitute, but its inhomogeneous networks and weak mechanics greatly impede clinical applications. Here, a dual crosslinked gelling system is developed with tunable architectures and mechanics to promote osteogenic capacity. Polyhedral oligomeric silsesquioxane (POSS) is designated as a rigid core surrounded by six disulfide-linked PEG shells and two 2-ureido-4[1H]-pyrimidinone (UPy) groups. Thiol-disulfide exchange is employed to fabricate chemical network because of the pH-responsive "on/off" function. While self-complementary UPy motif is capable of optimizing local microstructure to enhance mechanical properties. Taking the merits of biocompatibility and high-mechanics in periodontal ligament stem cells (PDLSCs) proliferation, attachment, and osteogenesis, hybrid hydrogel exhibits outstanding osteogenic potential both in vitro and in vivo. Importantly, it is the first time that a key epigenetic regulator of ten-eleven translocation 2 (Tet2) is discovered to significantly elevate the continuously active the WNT/ß-catenin through Tet2/HDAC1/E-cadherin/ß-catenin signaling cascade, thereby promoting PDLSCs osteogenesis. This work represents a general strategy to design the hydrogels with customized networks and biomimetic mechanics, and illustrates underlying osteogenic mechanisms that will extend the design rationales for high-functional biomaterials in tissue engineering.

Accuracy of additive manufacturing in stomatology.

With the rapid development of the three-dimensional (3D) printing technology in recent decades, precise and personalized manufacturing has been achieved gradually, bringing benefit to biomedical application, especially stomatology clinical practice. So far, 3D printing has been widely applied to prosthodontics, orthodontics, and maxillofacial surgery procedures, realizing accurate, efficient operation processes and promising treatment outcomes. Although the printing accuracy has improved, further exploration is still needed. Herein, we summarized the various additive manufacturing techniques and their applications in dentistry while highlighting the importance of accuracy (precision and trueness).

Ceramic Toughening Strategies for Biomedical Applications.

Aiming at shortage of metal materials, ceramic is increasingly applied in biomedicine due to its high strength, pleasing esthetics and good biocompatibility, especially for dental restorations and implants, artificial joints, as well as synthetic bone substitutes. However, the inherent brittleness of ceramic could lead to serious complications, such as fracture and disfunction of biomedical devices, which impede their clinical applications. Herein, several toughening strategies have been summarized in this review, including reinforcing phase addition, surface modification, and manufacturing processes improvement. Doping metal and/or non-metal reinforcing fillers modifies toughness of bulk ceramic, while surface modifications, mainly coating, chemical and thermal methods, regulate toughness on the surface layer. During fabrication, optimization should be practiced in powder preparation, green forming and densification processes. Various toughening strategies utilize mechanisms involving fine-grained, stress-induced phase transformation, and microcrack toughening, as well as crack deflection, bifurcation, bridging and pull-out. This review hopes to shed light on systematic combination of different toughening strategies and mechanisms to drive progress in biomedical devices.

Morphological changes of the anterior alveolar bone due to retraction of anterior teeth: a retrospective study.

BACKGROUD: To analyze the morphological changes of the anterior alveolar bone after the retraction of incisors in premolar extraction cases and the relationship between incisor retraction and remodeling of the alveolar base represented by points A and B displacements. METHODS: Pre- (T0) and post-treatment (T1) lateral cephalograms of 308 subjects in the maxilla and 154 subjects in the mandible who underwent the orthodontic treatment with extraction of 2 premolars in upper or lower arches were included. Alveolar bone width and height in both the maxillary and mandible incisor area were measured at T0 and T1 respectively. By superimposing the T0 and T1 cephalometric tracings, changes of points A and B, and the movement of the incisors were also measured. Then the correlation between incisor movement and the displacements of points A and B was analyzed. RESULTS: The alveolar bone width (ABW) showed a significant decrease in both maxilla and mandible (P < 0.001) except the labial side of the mandible (P > 0.05). The alveolar bone height (ABH) showed a significant increase in the labial side of maxilla and a significant decrease in the lingual side of maxilla and mandible. A strong positive correlation was verified between incisor movement and position changes of points A and B in both horizontal and vertical directions. CONCLUSIONS: Anterior alveolar bone width and height generally decreased after orthodontic treatment. Incisor retraction led to significant position changes of points A and B. The decrease of anterior alveolar bone due to significant incisor retraction should be taken into account in treatment planning.

Recent Progress in Antimicrobial Strategies for Resin-Based Restoratives.

Repairing tooth defects with dental resin composites is currently the most commonly used method due to their tooth-colored esthetics and photocuring properties. However, the higher than desirable failure rate and moderate service life are the biggest challenges the composites currently face. Secondary caries is one of the most common reasons leading to repair failure. Therefore, many attempts have been carried out on the development of a new generation of antimicrobial and therapeutic dental polymer composite materials to inhibit dental caries and prolong the lifespan of restorations. These new antimicrobial materials can inhibit the formation of biofilms, reduce acid production from bacteria and the occurrence of secondary caries. These results are encouraging and open the doors to future clinical studies on the therapeutic value of antimicrobial dental resin-based restoratives. However, antimicrobial resins still face challenges such as biocompatibility, drug resistance and uncontrolled release of antimicrobial agents. In the future, we should focus on the development of more efficient, durable and smart antimicrobial dental resins. This article focuses on the most recent 5 years of research, reviews the current antimicrobial strategies of composite resins, and introduces representative antimicrobial agents and their antimicrobial mechanisms.

Metallic Antibacterial Surface Treatments of Dental and Orthopedic Materials.

The oral cavity harbors complex microbial communities, which leads to biomaterial-associated infections (BAI) during dental and orthopedic treatments. Conventional antibiotic treatments have met great challenges recently due to the increasing emergency of drug-resistant bacteria. To tackle this clinical issue, antibacterial surface treatments, containing surface modification and coatings, of dental and orthopedic materials have become an area of intensive interest now. Among various antibacterial agents used in surface treatments, metallic agents possess unique properties, mainly including broad-spectrum antibacterial properties, low potential to develop bacterial resistance, relative biocompatibility, and chemical stability. Therefore, this review mainly focuses on underlying antibacterial applications and the mechanisms of metallic agents in dentistry and orthopedics. An overview of the present review indicates that much work remains to be done to deepen the understanding of antibacterial mechanisms and potential side-effects of metallic agents.