The Host Protein CAD Regulates the Replication of FMDV through the Function of Pyrimidines' De Novo Synthesis.

Foot-and-mouth disease virus (FMDV) is a single-stranded picornavirus that causes economically devastating disease in even-hooved animals. There has been little research on the function of host cells during FMDV infection. We aimed to shed light on key host factors associated with FMDV replication during acute infection. We found that HDAC1 overexpression in host cells induced upregulation of FMDV RNA and protein levels. Activation of the AKT-mammalian target of rapamycin (mTOR) signaling pathway using bpV(HOpic) or SC79 also promoted FMDV replication. Furthermore, short hairpin RNA (shRNA)-induced suppression of carbamoyl-phosphate synthetase 2, aspartate transcarbamylase, and dihydroorotase (CAD), a transcription factor downstream of the AKT-mTOR signaling pathway, resulted in downregulation of FMDV RNA and protein levels. Coimmunoprecipitation assays showed that the ACTase domain of CAD could interact with the FMDV 2C protein, suggesting that the ACTase domain of CAD may be critical in FMDV replication. CAD proteins participate in de novo pyrimidine synthesis. Inhibition of FMDV replication by deletion of the ACTase domain of CAD in host cells could be reversed by supplementation with uracil. These results revealed that the contribution of the CAD ACTase domain to FMDV replication is dependent on de novo pyrimidine synthesis. Our research shows that HDAC1 promotes FMDV replication by regulating de novo pyrimidine synthesis from CAD via the AKT-mTOR signaling pathway. IMPORTANCE Foot-and-mouth disease virus is an animal virus of the Picornaviridae family that seriously harms the development of animal husbandry and foreign trade of related products, and there is still a lack of effective means to control its harm. Replication complexes would generate during FMDV replication to ensure efficient replication cycles. 2C is a common viral protein in the replication complex of Picornaviridae virus, which is thought to be an essential component of membrane rearrangement and viral replication complex formation. The host protein CAD is a key protein in the pyrimidines de novo synthesis. In our research, the interaction of CAD and FMDV 2C was demonstrated in FMDV-infected BHK-21 cells, and it colocalized with 2C in the replication complex. The inhibition of the expression of FMDV 3D protein through interference with CAD and supplementation with exogenous pyrimidines reversed this inhibition, suggesting that FMDV might recruit CAD through the 2C protein to ensure pyrimidine supply during replication. In addition, we also found that FMDV infection decreased the expression of the host protein HDAC1 and ultimately inhibited CAD activity through the AKT-mTOR signaling pathway. These results revealed a unique means of counteracting the virus in BHK-21 cells lacking the interferon (IFN) signaling pathway. In conclusion, our study provides some potential targets for the development of drugs against FMDV.

The Morphological and Functional Effects of the Endoscope-Assisted One-Stage Approach for Crooked Nose.

BACKGROUND: A crooked nose is an external nose deformity predominantly caused by congenital aplasia or acquired secondary to trauma or surgery, often accompanied by a deviated nasal septum. Patients with crooked nose have dual needs to improve both esthetic and functional problems. METHODS: The clinical and photographic information of 48 patients diagnosed with a crooked nose and nasal septum deviation treated from January 2018 to January 2022 was acquired. The morphology and functional effects were investigated by evaluating the general condition of the operation, measuring the esthetic indexes of the nose, and subjectively scoring. RESULTS: For both morphology and function, endoscopy-assisted one-stage correction showed positive results in this study. The external nose deviation distance postoperatively measured 1.28 (0.85, 1.97) mm, which significantly decreased from the preoperative value of 3.96 (3.31, 5.29) mm. The scores of doctors and irrelevant medical students on nose morphology increased significantly from 4.75±1.88 and 3.84±0.76 to 6.48±1.21 and 7.21±0.67, respectively. The rhinoplasty outcome evaluation score and the "nasal obstruction symptom evaluation "score of patients were both significantly improved ( t = -7.508 and t =6.310, respectively, P < 0.001). CONCLUSION: Endoscope-assisted one-stage correction of the crooked nose can restore nasal morphology, improve the symptoms of nasal obstruction, and achieve patient satisfaction. It is a minimally invasive, safe, effective, and fast recovery approach for patients who need to solve both esthetic and functional problems.

Engineered 3D-Printed Polyvinyl Alcohol Scaffolds Incorporating ß-Tricalcium Phosphate and Icariin Induce Bone Regeneration in Rat Skull Defect Model.

The skull defects are challenging to self-heal, and autologous bone graft repair has numerous drawbacks. The scaffolds for the rapid and effective repair of skull defects have become an important research topic. In this study, polyvinyl alcohol (PVA)/ß-tricalcium phosphate(ß-TCP) composite scaffolds containing icariin (ICA) were prepared through direct-ink three-dimensional (3D) printing technology. ß-TCP in the composite scaffold had osteoconductive capability, and the ICA molecule had osteoinductive capacity. The ß-TCP and ICA components in the composite scaffold can enhance the capability to repair skull defects. We show that ICA exhibited a slow-release behaviour within 80 days. This behaviour helped the scaffold to continuously stimulate the formation of new bone. The results of in vitro cell compatibility experiments showed that the addition of ICA molecules contributed to the adhesion and proliferation of MC-3T3-E1 cells. The level of alkaline phosphatase secretion demonstrated that the slow release of ICA can promote the osteogenic differentiation of MC-3T3-E1 cells. The introduction of ICA molecules accelerated the in situ bone regeneration in in vivo. It is concluded that the 3D-printed PVA scaffold with ß-TCP and ICA has a wide range of potential applications in the field of skull defect treatment.

Comparison of biological and mechanical properties of different paranasal sinus mucosa in goat.

OBJECTIVE: The present study was designed to explore endurable pressure intensity of different paranasal sinus mucosa in goats. METHOD: Mucosa commonly involved in maxillary sinus augmentation, including mucosa from maxillary sinus crest, maxillary sinus floor, and frontal sinus, were harvested in a computed tomography-guided manner. The obtained mucosa was then sectioned into square and irregular ones for maximum endurable pressure intensity determination and morphological observation, respectively. RESULTS: Thickness of paranasal sinus mucosa, as determined under morphological staining by an optical microscope with a graduated eyepiece, were calculated. And the results showed that the average thickness of maxillary sinus crest mucosa, floor mucosa, and frontal sinus mucosa in goats were 410.03 ± 65.97 µm, 461.33 ± 91.37 µm and 216.90 ± 46.47 µm, respectively. Significant differences between maxillary sinus crest and frontal sinus, maxillary sinus floor, and frontal sinus were observed (P < 0.05). Maximum endurable pressure intensity was determined by utilizing a self-made clamp device and the results revealed maximum endurable pressure intensity of maxillary sinus crest mucosa, floor mucosa and frontal sinus mucosa in goats were 260.08 ± 80.12Kpa, 306.90 ± 94.37Kpa and 121.72 ± 31.72Kpa, respectively. Also, a statistically significant difference was observed when comparing the endurable pressure intensity between maxillary sinus crest and frontal sinus, maxillary sinus floor, and frontal sinus (P < 0.05). Further correlation analysis also revealed a positive correlation between the thickness of mucosa of the maxillary sinus and frontal sinus and maximum endurable pressure intensity (P < 0.05). CONCLUSION: Mucosal thickness and maximum endurable pressure intensity of maxillary sinus crest and floor were larger than that of frontal sinus mucosa and a positive correlation between the thickness of mucosa and endurable pressure intensity was observed. Our results thus might provide an experimental basis and guidance for mucosa-related problems involved maxillary sinus augmentation.

Ratiometric Imaging of MMP-2 Activity Facilitates Tumor Detection Using Activatable Near-Infrared Fluorescent Semiconducting Polymer Nanoparticles.

Enzyme-activatable ratiometric near-infrared (NIR) fluorescent probes enabling noninvasive imaging of enzyme activity in vivo are promising for biomedical research; however, such probes with ratiometric fluorescence emissions both in NIR window under a single NIR light excitation are largely unexplored. Here, a quenched NIR fluorophore of Cy5.5 is integrated with NIR fluorescent poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b']dithiophene)-alt-4,7(2,1,3-benzothiadiazole)] (PCPDTBT)-based semiconducting polymer nanoparticles (SPNs), and an αv ß3 integrin-targeting and matrix metalloproteinase-2 (MMP-2)-activatable ratiometric fluorescent probe (SPN-MMP-RGD) is developed. Under excitation at 660 nm, SPN-MMP-RGD shows "always-on" fluorescence of PCPDTBT (830 nm) and activatable fluorescence of Cy5.5 (690 nm) toward MMP-2, affording a remarkable ≈176-fold enhancement in fluorescence intensity ratio between 690 and 830 nm (I690 /I830 ) for sensitive detection of MMP-2 activity in vitro and in tumor cells. By virtue of ratiometric fluorescence imaging independently of probe's concentration, SPN-MMP-RGD can not only accurately report on MMP-2 levels regarding different tumor sizes, but also noninvasively delineate MMP-2-positive tiny gastric tumors metastasis in vivo. The authors' study reveals the potential of SPN-MMP-RGD for ratiometric fluorescence imaging of MMP-2 activity via combining two independent NIR fluorophores, which can be amenable for the design of other enzyme-activatable ratiometric NIR fluorescent probes for reliable in vivo imaging.

Poly(Dopamine) Coating on 3D-Printed Poly-Lactic-Co-Glycolic Acid/ß-Tricalcium Phosphate Scaffolds for Bone Tissue Engineering.

Bone defects caused by osteoporosis, bone malignant tumors, and trauma are very common, but there are many limiting factors in the clinical treatment of them. Bone tissue engineering is the most promising treatment and is considered to be the main strategy for bone defect repair. We prepared polydopamine-coated poly-(lactic-co-glycolic acid)/ß-tricalcium phosphate composite scaffolds via 3D printing, and a series of characterization and biocompatibility tests were carried out. The results show that the mechanical properties and pore-related parameters of the composite scaffolds are not affected by the coatings, and the hydrophilicities of the surface are obviously improved. Scanning electron microscopy and micro-computed tomography display the nanoscale microporous structure of the bio-materials. Biological tests demonstrate that this modified surface can promote cell adhesion and proliferation and improve osteogenesis through the increase of polydopamine (PDA) concentrations. Mouse cranial defect experiments are conducted to further verify the conclusion that scaffolds with a higher content of PDA coatings have a better effect on the formation of new bones. In the study, the objective of repairing critical-sized defects is achieved by simply adding PDA as coatings to obtain positive results, which can suggest that this modification method with PDA has great potential.

Engineering of Electrochromic Materials as Activatable Probes for Molecular Imaging and Photodynamic Therapy.

Electrochromic materials (EMs) are widely used color-switchable materials, but their applications as stimuli-responsive biomaterials to monitor and control biological processes remain unexplored. This study reports the engineering of an organic π-electron structure-based EM (dicationic 1,1,4,4-tetraarylbutadiene, 12+) as a unique hydrogen sulfide (H2S)-responsive chromophore amenable to build H2S-activatable fluorescent probes (12+-semiconducting polymer nanoparticles, 12+-SNPs) for in vivo H2S detection. We demonstrate that EM 12+, with a strong absorption (500-850 nm), efficiently quenches the fluorescence (580, 700, or 830 nm) of different fluorophores within 12+-SNPs, while the selective conversion into colorless diene 2 via H2S-mediated two-electron reduction significantly recovers fluorescence, allowing for non-invasive imaging of hepatic and tumor H2S in mice in real time. Strikingly, EM 12+ is further applied to design a near-infrared photosensitizer with tumor-targeting and H2S-activatable ability for effective photodynamic therapy (PDT) of H2S-related tumors in mice. This study demonstrates promise for applying EMs to build activatable probes for molecular imaging of H2S and selective PDT of tumors, which may lead to the development of new EMs capable of detecting and regulating essential biological processes in vivo.

Successful replantation of amputated facial tissues by supermicrosurgery.

BACKGROUND: Although replantation of amputated facial segments remains challenging in reconstructive surgery, it offers excellent aesthetic and functional outcomes. METHODS: From May 2004 to October 2019, 12 patients underwent replantation of amputated facial tissues by supermicrosurgery. The case details, such as the rationale for replantation, the operation method, and postoperative therapy, are described. Four cases are discussed to demonstrate the replantation of different facial parts. RESULTS: Facial tissue replantation was successful in all 12 patients without secondary surgery. The cases included the nose (1 patient), ears (8 patients), lips (2 patients), and one of the soft tissue segments surrounding the lower jaw. Venous congestion occurred in three patients who received a solitary arterial repair and were treated with bloodletting. All patients expressed satisfaction with the cosmetic and functional results at the final follow-up. CONCLUSIONS: Supermicrosurgical facial tissue replantation is a promising and effective procedure for providing patients with the best aesthetic and functional outcomes.

Single-Cell Sequencing Yields Insights in the Evolution of Foot-and-Mouth Disease Virus Persistent Infection.

Foot-and-mouth disease virus (FMDV) could cause acute infection in host cells, or they could coexist with host cells to generate persistent infection. In persistent infection, the virus could survive for a long time in the host and could be transmitted between different host cells. In the case of FMDV-persistent infection cell line, there is a remarkable significant cellular heterogeneity in the FMDV-persistent infection cell line due to differences of viral load in the individual cells within the cell line. However, the mechanisms of FMDV-persistent infection are not well understood. It is now generally accepted that multiple factors contribute to the coevolution of viruses and cells during the course of persistent infection. The outcome would influence the development of persistent FMDV infection conjointly, reaching a state of equilibrium ultimately. Therefore, in order to elucidate the mechanism of cellular heterogeneity in FMDV-persistent infection cell line, single-cell sequencing was performed on BHK-Op, and pseudotime trajectory plot was draw through cell cluster. Based on the cell clusters, we predicted the development and progression of the FMDV-persistent infection. It could be well explained by the fact that, in BHK-Op cells, there are a fraction of infected cells and a fraction of virus-exposed but uninfected bystander cells. By further comparing the transcripts in cell clusters, we found that these genes were involved in changes in ribosome biogenesis, cell cycle, and intracellular signaling including the interferon signaling pathway and mitogen-activated protein kinase (MAPK) signaling pathway. Through comprehensive cross-tabulation analysis of differential expressed genes in various cluster of cells, we identified a high association of Fos, a downstream transcription factor of the MAPK/extracellular signal-regulated kinase (ERK) signaling pathway, with viral replication during the formation of FMDV-persistent infection. Through the further study of Fos, we found that downregulation of Fos facilitates viral clearance during FMDV-persistent infection. Upregulation of c-Raf, which is the upstream of the MAPK/ERK signaling pathway, could promote FMDV replication through downregulation of Fos. Our research is the first to provide insight into the mechanism of the formation FMDV-persistent infection through single-cell sequencing using persistent infection cell line. Pseudotime trajectory analysis was the first time to apply for FMDV-persistent infection cell line. Our work highlights the detailed overview of the evolution of FMDV-persistent infection. We also analyzed the differential expressed genes in the replication or elimination of FMDV within the host. We found that the MAPK/ERK signaling pathway and its downstream transcription factor Fos play an important role in FMDV-persistent infection.

Simultaneous Photodynamic Eradication of Tooth Biofilm and Tooth Whitening with an Aggregation-Induced Emission Luminogen.

Dental caries is among the most prevalent dental diseases globally, which arises from the formation of microbial biofilm on teeth. Besides, tooth whitening represents one of the fastest-growing areas of cosmetic dentistry. It will thus be great if tooth biofilm eradication can be combined with tooth whitening. Herein, a highly efficient photodynamic dental therapy strategy is reported for tooth biofilm eradication and tooth discoloration by employing a photosensitizer (DTTPB) with aggregation-induced emission characteristics. DTTPB can efficiently inactivate S. mutans, and inhibit biofilm formation by suppressing the expression of genes associated with extracellular polymeric substance synthesis, bacterial adhesion, and superoxide reduction. Its inhibition performance can be further enhanced through combined treatment with chlorhexidine. Besides, DTTPB exhibits an excellent tooth-discoloration effect on both colored saliva-coated hydroxyapatite and clinical teeth, with short treatment time (less than 1 h), better tooth-whitening performance than 30% hydrogen peroxide, and almost no damage to the teeth. DTTPB also demonstrates excellent biocompatibility with neglectable hemolysis effect on mouse red blood cells and almost no killing effect on mammalian cells, which enables its potential applications for simultaneous tooth biofilm eradication and tooth whitening in clinical dentistry.

Effect of flushing temperature on preparation ability of rotary nickel-titanium files.

PURPOSE: The effect of flushing at different temperatures on the preparation ability of rotary nickel-titanium files was investigated to provide guideline for clinical application. METHODS: Sixty ProTaper Universal F1 rotary nickel-titanium files were randomly divided into three groups treated by flushing at 6°C, 23°C, and 40°C. Root canal preparation was conducted by step-by-step method on standardized nickel-titanium instrument fracture models. During preparation, the thrust force was set as 10 N, and water was continuously flushed. The motor speed was 350 rpm (rounds per minute), and the torque was 3.0 N cm. When the set torque was reached, the motor automatically rotated in the reverse direction and was pulled out. RESULTS: Root canal preparation was performed using ProTaper Universal F1 rotary nickel-titanium files treated by flushing. The numbers of rotations before the device was fracture were 429.33 ± 214.68, 821.92 ± 410.43, and 1304.92 ± 297.81, respectively. When each root canal was completed, the numbers of instrument rotations were 272.15 ± 88.30, 188.85 ± 34.36, and 163.41 ± 16.18, respectively. Rank sum test and analysis of variance were performed by IBM SPSS Statistics v21.0 software, and both of them were p < 0.01, indicating that the number of cycles to failure (NCF) and the number of instrument rotations for each root tube were statistically different at the three temperatures. CONCLUSIONS: The self-made resin-simulated curved root canal can replace the real root canal to complete the root canal preparation experiment. The group of nickel-titanium files treated by flushing at 23°C can prepare more root canals and prolong the life of nickel-titanium files than at 6°C. When flushing was done at 40°C, the number of root canals prepared by nickel-titanium files was the highest, and it was not easy to damage the instrument, but lateral perforation occurred easily during root canal preparation.

Porphyromonas gingivalis lipopolysaccharide affects oral epithelial connections via pyroptosis.

BACKGROUND/PURPOSE: Pyroptosis is a form of programmed cell death dependent on the activation of caspase-1. Porphyromonas gingivalis (P. gingivalis) is a major pathogenic bacterium in periodontitis and its lipopolysaccharide (LPS) can trigger inflammation. However, whether P. gingivalis-LPS affects epithelial connections or triggers pyroptosis in the gingival epithelium is unknown. MATERIALS AND METHODS: Gingival samples from human donors were collected and the expression levels of E-cadherin, nucleotide-binding oligomerization domain-like receptor protein 3 (NLRP3), caspase-1/4/5, interleukin (IL)-18, and IL-1ß were examined. P. gingivalis-LPS was injected into rat gingival sulcus to establish gingivitis models, and the expression levels of E-cadherin, NLRP3, caspase-1/11, IL-18, and IL-1ß were compared via immunohistochemistry. The mRNA levels of E-cadherin, caspase-1, IL-18, and IL-1ß were evaluated in oral mucosa epithelial cells (OMECs) and rat gingival tissues. RESULTS: In the present study, NLRP3 (p < 0.01), caspase-1 (p < 0.01), caspase-4 (p = 0.044), and IL-18 (p = 0.036) expression was greater in the human inflammatory gingival samples, whereas E-cadherin (p = 0.045) had the opposite presentation. Gingivitis models were successfully established in rats with the injection of P. gingivalis-LPS. NLRP3 (p = 0.015), caspase-1 (p < 0.01), caspase-11 (p < 0.01), and IL-18 (p = 0.041) were upregulated, whereas E-cadherin (p = 0.038) expression was decreased. Furthermore, E-cadherin mRNA was decreased while caspase-1, IL-18, and IL-1ß mRNA levels were increased. The addition of a caspase-1 inhibitor reversed the expression changes. CONCLUSION: P. gingivalis-LPS may effectively destroy the epithelial connection by triggering pyroptosis.

The Fibroblast Growth Factor 9 (Fgf9) Participates in Palatogenesis by Promoting Palatal Growth and Elevation.

Cleft palate, a common global congenital malformation, occurs due to disturbances in palatal growth, elevation, contact, and fusion during palatogenesis. The Fibroblast growth factor 9 (FGF9) mutation has been discovered in humans with cleft lip and palate. Fgf9 is expressed in both the epithelium and mesenchyme, with temporospatial diversity during palatogenesis. However, the specific role of Fgf9 in palatogenesis has not been extensively discussed. Herein, we used Ddx4-Cre mice to generate an Fgf9-/- mouse model (with an Fgf9 exon 2 deletion) that exhibited a craniofacial syndrome involving a cleft palate and deficient mandibular size with 100% penetrance. A smaller palatal shelf size, delayed palatal elevation, and contact failure were investigated to be the intrinsic causes for cleft palate. Hyaluronic acid accumulation in the extracellular matrix (ECM) sharply decreased, while the cell density correspondingly increased in Fgf9-/- mice. Additionally, significant decreases in cell proliferation were discovered in not only the palatal epithelium and mesenchyme but also among cells in Meckel's cartilage and around the mandibular bone in Fgf9-/- mice. Serial sections of embryonic heads dissected at embryonic day 14.5 (E14.5) were subjected to craniofacial morphometric measurement. This highlighted the reduced oral volume owing to abnormal tongue size and descent, and insufficient mandibular size, which disturbed palatal elevation in Fgf9-/- mice. These results indicate that Fgf9 facilitates palatal growth and timely elevation by regulating cell proliferation and hyaluronic acid accumulation. Moreover, Fgf9 ensures that the palatal elevation process has adequate space by influencing tongue descent, tongue morphology, and mandibular growth.

H2S-activatable near-infrared afterglow luminescent probes for sensitive molecular imaging in vivo.

Afterglow luminescent probes with high signal-to-background ratio show promise for in vivo imaging; however, such probes that can be selectively delivered into target sites and switch on afterglow luminescence remain limited. We optimize an organic electrochromic material and integrate it into near-infrared (NIR) photosensitizer (silicon 2,3-naphthalocyanine bis(trihexylsilyloxide) and (poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene]) containing nanoparticles, developing an H2S-activatable NIR afterglow probe (F12+-ANP). F12+-ANP displays a fast reaction rate (1563 ± 141 M-1 s-1) and large afterglow turn-on ratio (~122-fold) toward H2S, enabling high-sensitivity and -specificity measurement of H2S concentration in bloods from healthy persons, hepatic or colorectal cancer patients. We further construct a hepatic-tumor-targeting and H2S-activatable afterglow probe (F12+-ANP-Gal) for noninvasive, real-time imaging of tiny subcutaneous HepG2 tumors (<3 mm in diameter) and orthotopic liver tumors in mice. Strikingly, F12+-ANP-Gal accurately delineates tumor margins in excised hepatic cancer specimens, which may facilitate intraoperative guidance of hepatic cancer surgery.

Rational engineering of semiconductor QDs enabling remarkable 1O2 production for tumor-targeted photodynamic therapy.

Semiconductor quantum dots (QDs) have served as superior optically active nanomaterials for molecular imaging and photodynamic therapy (PDT), but the low singlet oxygen (1O2) quantum yield and lack of tumor selectivity have limited their applications for tumor PDT in vivo. Here, we report the rational engineering of QDs into tumor-targeting hybrid nanoparticles through micelle-encapsulating a pre-assembled unique QD-Zn-porphyrin complex, a highly fluorescent organic photosensitizer rhodamine 6G (R6G), and a near-infrared fluorophore NIR775 with folic acid labeled phospholipid polymers. These nanoparticles have large porphyrin payloads and strong light absorption capability, thus contributing to an extremely high 1O2 quantum yield (∼0.91) via an efficient dual energy transfer process. In vivo studies show that they can preferably accumulate in tumors through folate receptor-mediated active delivery, permitting non-invasive fluorescence imaging and effective PDT of tumors in living mice. This study highlights the utility of hybrid semiconductor QDs for both tumor imaging and PDT in vivo.