Conversion of poplar biomass into high-energy density tricyclic sesquiterpene jet fuel blendstocks.

BACKGROUND: In an effort to ensure future energy security, reduce greenhouse gas emissions and create domestic jobs, the US has invested in technologies to develop sustainable biofuels and bioproducts from renewable carbon sources such as lignocellulosic biomass. Bio-derived jet fuel is of particular interest as aviation is less amenable to electrification compared to other modes of transportation and synthetic biology provides the ability to tailor fuel properties to enhance performance. Specific energy and energy density are important properties in determining the attractiveness of potential bio-derived jet fuels. For example, increased energy content can give the industry options such as longer range, higher load or reduced takeoff weight. Energy-dense sesquiterpenes have been identified as potential next-generation jet fuels that can be renewably produced from lignocellulosic biomass. RESULTS: We developed a biomass deconstruction and conversion process that enabled the production of two tricyclic sesquiterpenes, epi-isozizaene and prespatane, from the woody biomass poplar using the versatile basidiomycete Rhodosporidium toruloides. We demonstrated terpene production at both bench and bioreactor scales, with prespatane titers reaching 1173.6 mg/L when grown in poplar hydrolysate in a 2 L bioreactor. Additionally, we examined the theoretical fuel properties of prespatane and epi-isozizaene in their hydrogenated states as blending options for jet fuel, and compared them to aviation fuel, Jet A. CONCLUSION: Our findings indicate that prespatane and epi-isozizaene in their hydrogenated states would be attractive blending options in Jet A or other lower density renewable jet fuels as they would improve viscosity and increase their energy density. Saturated epi-isozizaene and saturated prespatane have energy densities that are 16.6 and 18.8% higher than Jet A, respectively. These results highlight the potential of R. toruloides as a production host for the sustainable and scalable production of bio-derived jet fuel blends, and this is the first report of prespatane as an alternative jet fuel.

Production of ent-kaurene from lignocellulosic hydrolysate in Rhodosporidium toruloides.

BACKGROUND: Rhodosporidium toruloides has emerged as a promising host for the production of bioproducts from lignocellulose, in part due to its ability to grow on lignocellulosic feedstocks, tolerate growth inhibitors, and co-utilize sugars and lignin-derived monomers. Ent-kaurene derivatives have a diverse range of potential applications from therapeutics to novel resin-based materials. RESULTS: The Design, Build, Test, and Learn (DBTL) approach was employed to engineer production of the non-native diterpene ent-kaurene in R. toruloides. Following expression of kaurene synthase (KS) in R. toruloides in the first DBTL cycle, a key limitation appeared to be the availability of the diterpene precursor, geranylgeranyl diphosphate (GGPP). Further DBTL cycles were carried out to select an optimal GGPP synthase and to balance its expression with KS, requiring two of the strongest promoters in R. toruloides, ANT (adenine nucleotide translocase) and TEF1 (translational elongation factor 1) to drive expression of the KS from Gibberella fujikuroi and a mutant version of an FPP synthase from Gallus gallus that produces GGPP. Scale-up of cultivation in a 2 L bioreactor using a corn stover hydrolysate resulted in an ent-kaurene titer of 1.4 g/L. CONCLUSION: This study builds upon previous work demonstrating the potential of R. toruloides as a robust and versatile host for the production of both mono- and sesquiterpenes, and is the first demonstration of the production of a non-native diterpene in this organism.

Optimization of Methanotrophic Growth and Production of Poly(3-Hydroxybutyrate) in a High-Throughput Microbioreactor System.

Production of poly(3-hydroxybutyrate) (P3HB) from methane has economic and environmental advantages over production by agricultural feedstock. Identification of high-productivity strains and optimal growth conditions is critical to efficient conversion of methane to polymer. Current culture conditions, including serum bottles, shake flasks, and agar plates, are labor-intensive and therefore insufficient for systematic screening and isolation. Gas chromatography, the standard method for analysis of P3HB content in bacterial biomass, is also incompatible with high-throughput screening. Growth in aerated microtiter plates coupled with a 96-well Nile red flow-cytometric assay creates an integrated microbioreactor system for high-throughput growth and analysis of P3HB-producing methanotrophic cultures, eliminating the need for individual manipulation of experimental replicates. This system was tested in practice to conduct medium optimization for P3HB production in pure cultures of Methylocystis parvus OBBP. Optimization gave insight into unexpected interactions: for example, low calcium concentrations significantly enhanced P3HB production under nitrogen-limited conditions. Optimization of calcium and copper concentrations in the growth medium increased final P3HB content from 18.1% to 49.4% and P3HB concentration from 0.69 g/liter to 3.43 g/liter while reducing doubling time from 10.6 h to 8.6 h. The ability to culture and analyze thousands of replicates with high mass transfer in completely mixed culture promises to streamline medium optimization and allow the detection and isolation of highly productive strains. Applications for this system are numerous, encompassing analysis of biofuels and other lipid inclusions, as well as analysis of heterotrophic and photosynthetic systems.

Poly-3-hydroxybutyrate metabolism in the type II methanotroph Methylocystis parvus OBBP.

Differences in carbon assimilation pathways and reducing power requirements among organisms are likely to affect the role of the storage polymer poly-3-hydroxybutyrate (PHB). Previous researchers have demonstrated that PHB functions as a sole growth substrate in aerobic cultures enriched on acetate during periods of carbon deficiency, but it is uncertain how C(1) metabolism affects the role of PHB. In the present study, the type II methanotroph Methylocystis parvus OBBP did not replicate using stored PHB in the absence of methane, even when all other nutrients were provided in excess. When PHB-rich cultures of M. parvus OBBP were deprived of carbon and nitrogen for 48 h, they did not utilize significant amounts of stored PHB, and neither cell concentrations nor concentrations of total suspended solids changed significantly. When methane and nitrogen both were present, PHB and methane were consumed simultaneously. Cells with PHB had significantly higher specific growth rates than cells lacking PHB. The addition of formate (a source of reducing power) to PHB-rich cells delayed PHB consumption, but the addition of glyoxylate (a source of C(2) units) did not. This and results from other researchers suggest that methanotrophic PHB metabolism is linked to the supply of reducing power as opposed to the supply of C(2) units for synthesis.

Cyclic, alternating methane and nitrogen limitation increases PHB production in a methanotrophic community.

To identify feast-famine strategies that favor PHB accumulation in Type II methanotrophic proteobacteria, three sequencing batch reactors seeded with a defined inoculum of Type II methanotrophs were subjected to 24-h cycles consisting of (1) repeated nitrogen limitation, (2) repeated nitrogen and oxygen limitation, and (3) repeated nitrogen and methane limitation. PHB levels within each reactor and capacity to produce PHB in offline batch incubations were monitored over 11 cycles. PHB content increased only in the reactor limited by both nitrogen and methane. This reactor became dominated by Methylocystis parvus OBBP with no detectable minority populations. It was concluded that repeated nitrogen and methane limitations favored PHB accumulation in strain OBBP and provided it with a competitive advantage under the conditions imposed.