Thiourea Derivatives, Simple in Structure but Efficient Enzyme Inhibitors and Mercury Sensors.

In this study six unsymmetrical thiourea derivatives, 1-isobutyl-3-cyclohexylthiourea (1), 1-tert-butyl-3-cyclohexylthiourea (2), 1-(3-chlorophenyl)-3-cyclohexylthiourea (3), 1-(1,1-dibutyl)-3-phenylthiourea (4), 1-(2-chlorophenyl)-3-phenylthiourea (5) and 1-(4-chlorophenyl)-3-phenylthiourea (6) were obtained in the laboratory under aerobic conditions. Compounds 3 and 4 are crystalline and their structure was determined for their single crystal. Compounds 3 is monoclinic system with space group P21/n while compound 4 is trigonal, space group R3:H. Compounds (1-6) were tested for their anti-cholinesterase activity against acetylcholinesterase and butyrylcholinesterase (hereafter abbreviated as, AChE and BChE, respectively). Potentials (all compounds) as sensing probes for determination of deadly toxic metal (mercury) using spectrofluorimetric technique were also investigated. Compound 3 exhibited better enzyme inhibition IC50 values of 50, and 60 µg/mL against AChE and BChE with docking score of -10.01, and -8.04 kJ/mol, respectively. The compound also showed moderate sensitivity during fluorescence studies.

Structural analysis of Gossypium hirsutum fibers grown under greenhouse and hydroponic conditions.

Cotton is the one of the world's most important crops. Like any other crop, cotton growth/development and fiber quality is highly dependent on environmental factors. Increasing global weather instability has been negatively impacting its economy. Cotton is a crop that exerts an intensive pressure over natural resources (land and water) and demands an overuse of pesticides. Thus, the search for alternative cotton culture methods that are pesticide-free (biocotton) and enable customized standard fiber quality should be encouraged. Here we describe a culture of Gossypium hirsutum ("Upland" Cotton) utilizing a greenhouse and hydroponics in which the fibers are morphological similar to conventional cultures and structurally fit into the classical two-phase cellulose I model with 4.19nm crystalline domains surrounded by amorphous regions. These fibers exhibit a single crystalline form of cellulose I-Iß, monoclinic unit cell. Fiber quality bulk analysis shows an improved length, strength, whiteness when compared with soil-based cultures. Finally, we show that our fibers can be spun, used for production of non-woven fabrics and indigo-vat stained demonstrating its potential in industrial and commercial applications.

Potential biological role of laccase from the sponge Suberites domuncula as an antibacterial defense component.

BACKGROUND: Laccases are copper-containing enzymes that catalyze the oxidation of a wide variety of phenolic substrates. METHODS: We describe the first poriferan laccase from the marine demosponge Suberites domuncula. RESULTS: This enzyme comprises three characteristic multicopper oxidase homologous domains. Immunohistological studies revealed that the highest expression of the laccase is in the surface zone of the animals. The expression level of the laccase gene is strongly upregulated after exposure of the animals to the bacterial endotoxin lipopolysaccharide. To allow the binding of the recombinant enzyme to ferromagnetic nanoparticles, a recombinant laccase was prepared which contained in addition to the His-tag, a Glu-tag at the N-terminus of the enzyme. The recombinant laccase was enzymatically active. The apparent Michaelis constant of the enzyme is 114 µM, using syringaldazine as substrate. Exposure of E. coli to the nanoparticles, coated with Glu-tagged laccase, and to the mediator 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) in the presence of lignin, as the oxidizable substrate, resulted in an almost complete inhibition of colony formation. Quantitative studies of the effect of the laccase-coated iron oxide nanoparticles were performed using E. coli grown in suspension in reaction tubes within a magnetic nanoparticle separator. CONCLUSIONS: This newly designed magnetic nanoparticle separator allowed a removal of the nanoparticles after terminating the reaction. Using this system, a strong dose-dependent inhibition of the growth of E. coli by the laccase iron oxide nanoparticles was determined. GENERAL SIGNIFICANCE: From our data we conclude that the sponge laccase is involved in the anti-bacterial defense of the sponge organism.

Precursor polymers for the carbon coating of Au@ZnO multipods for application as active material in lithium-ion batteries.

The synthesis of statistical and block copolymers based on polyacrylonitrile, as a source for carbonaceous materials, and thiol-containing repeating units as inorganic nanoparticle anchoring groups is reported. These polymers are used to coat Au@ZnO multipod heteroparticles with polymer brushes. IR spectroscopy and transmission electron microscopy prove the successful binding of the polymer onto the inorganic nanostructures. Thermogravimetric analysis is applied to compare the binding ability of the block and statistical copolymers. Subsequently, the polymer coating is transformed into a carbonaceous (partially graphitic) coating by pyrolysis. The obtained carbon coating is characterized by Raman spectroscopy and energy-dispersive X-ray (EDX) spectroscopy. The benefit of the conformal carbon coating of the Au@ZnO multipods regarding its application as lithium-ion anode material is revealed by performing galvanostatic cycling, showing a highly enhanced and stabilized electrochemical performance of the carbon-coated particles (still 831 mAh g(-1) after 150 cycles) with respect to the uncoated ones (only 353 mAh g(-1) after 10 cycles).

High-performance TiO2 nanoparticle/DOPA-polymer composites.

Many natural materials are complex composites whose mechanical properties are often outstanding considering the weak constituents from which they are assembled. Nacre, made of inorganic (CaCO3 ) and organic constituents, is a textbook example because of its strength and toughness, which are related to its hierarchical structure and its well-defined organic-inorganic interface. Emulating the construction principles of nacre using simple inorganic materials and polymers is essential for understanding how chemical composition and structure determine biomaterial functions. A hard multilayered nanocomposite is assembled based on alternating layers of TiO2 nanoparticles and a 3-hydroxy-tyramine (DOPA) substituted polymer (DOPA-polymer), strongly cemented together by chelation through infiltration of the polymer into the TiO2 mesocrystal. With a Young's modulus of 17.5 ± 2.5 GPa and a hardness of 1.1 ± 0.3 GPa the resulting material exhibits high resistance against elastic as well as plastic deformation. A key feature leading to the high strength is the strong adhesion of the DOPA-polymer to the TiO2 nanoparticles.

Polyacrylonitrile block copolymers for the preparation of a thin carbon coating around TiO2 nanorods for advanced lithium-ion batteries.

Herein, a new method for the realization of a thin and homogenous carbonaceous particle coating, made by carbonizing RAFT polymerization derived block copolymers anchored on anatase TiO2 nanorods, is presented. These block copolymers consist of a short anchor block (based on dopamine) and a long, easily graphitizable block of polyacrylonitrile. The grafting of such block copolymers to TiO2 nanorods creates a polymer shell, which can be visualized by atomic force microscopy (AFM). Thermal treatment at 700 °C converts the polyacrylonitrile block to partially graphitic structures (as determined by Raman spectroscopy), establishing a thin carbon coating (as determined by transmission electron microscopy, TEM, analysis). The carbon-coated TiO2 nanorods show improved electrochemical performance in terms of achievable specific capacity and, particularly, long-term cycling stability by reducing the average capacity fading per cycle from 0.252 mAh g(-1) to only 0.075 mAh g(-1) .

Metal ion affinity-based biomolecular recognition and conjugation inside synthetic polymer nanopores modified with iron-terpyridine complexes.

Here we demonstrate a novel biosensing platform for the detection of lactoferrin (LFN) via metal-organic frameworks, in which the metal ions have accessible free coordination sites for binding, inside the single conical nanopores fabricated in polymeric membrane. First, monolayer of amine-terminated terpyridine (metal-chelating ligand) is covalently immobilized on the inner walls of the nanopore via carbodiimide coupling chemistry. Second, iron-terpyridine (iron-terPy) complexes are obtained by treating the terpyridine modified-nanopores with ferrous sulfate solution. The immobilized iron-terPy complexes can be used as recognition elements to fabricate biosensing nanodevice. The working principle of the proposed biosensor is based on specific noncovalent interactions between LFN and chelated metal ions in the immobilized terpyridine monolayer, leading to the selective detection of analyte protein. In addition, control experiments proved that the designed biosensor exhibits excellent biospecificity and nonfouling properties. Furthermore, complementary experiments are conducted with multipore membranes containing an array of cylindrical nanopores. We demonstrate that in the presence of LFN in the feed solution, permeation of methyl viologen (MV(2+)) and 1,5-naphthalenedisulphate (NDS(2-)) is drastically suppressed across the iron-terPy modified membranes. On the basis of these findings, we envision that apart from conventional ligand-receptor interactions, the designing and immobilization of alternative functional ligands inside the synthetic nanopores would extend this method for the construction of new metal ion affinity-based biomimetic systems for the specific binding and recognition of other biomolecules.

Hydrogen peroxide sensing with horseradish peroxidase-modified polymer single conical nanochannels.

Inspired from the funtioning and responsiveness of biological ion channels, researchers attempt to develop biosensing systems based on polymer and solid-state nanochannels. The applicability of these nanochannels for detection/sensing of any foreign analyte in the surrounding environment depends critically on the surface characteristics of the inner walls. Attaching recognition sites to the channel walls leads to the preparation of sensors targeted at a specific molecule. There are many nanochannel platforms for the detection of DNA and proteins, but only a few are capable of detecting small molecules. Here, we describe a nanochannel platform for the detection of hydrogen peroxide, H(2)O(2), which is not only a toxic waste product in the cellular systems but also a key player in the redox signaling pathways. The sensor is based on single conical nanochannels fabricated in an ion tracked polymer membrane. The inner walls of the channel are decorated with horseradish peroxidase (HRP) enzyme using carbodiimide coupling chemistry. The success of the HRP immobilization on the channel surface is confirmed by measuring the pH-dependent current-voltage (I-V) curves of the system. The reported HRP-nanochannel system detects nanomolar concentrations of H(2)O(2) with 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) as the substrate. The immobilized HRP enzyme is thus capable of inducing redox reactions in a subfemtoliter volume of single nanochannels. We demonstrate that functioning of the designed biosensor is reversible and can be used multiple times to detect H(2)O(2) at various concentrations.

Design, characterization and evaluation of hydroxyethylcellulose based novel regenerable supersorbent for heavy metal ions uptake and competitive adsorption.

Hydroxyethylcellulose succinate-Na (HEC-Suc-Na) was designed and evaluated for removal of some heavy metal ions from aqueous solution. Pristine sorbent HEC-Suc-Na was thoroughly characterized by FTIR and solid-state CP/MAS 13C NMR spectroscopy, SEM-EDS and zero point charge analyses. Langmuir isotherm, pseudo second order kinetic and ion exchange models provided best fit to the experimental data of sorption of metal ions. Maximum sorption capacities of supersorbent HEC-Suc-Na for sorption of heavy metal ions from aqueous solution as calculated by Langmuir isotherm model were found to be 1000, 909.09, 666.6, 588 and 500mgg-1 for Pb(II), Cr(VI), Co(II), Cu(II) and Ni(II), respectively. Competitive sorption of these heavy metal ions was carried out from galvanic and nuclear waste water simulated environment. The negative values of ΔG° and ΔH° indicated spontaneity and exothermic nature of sorption. The sorbent was efficiently regenerated with no significant decrease in sorption capacity after five cycles.

Hydroxypropylcellulose as a novel green reservoir for the synthesis, stabilization, and storage of silver nanoparticles.

Polysaccharides are attracting the vigil eye of researchers in order to design the green synthesis of silver nanoparticles (Ag NPs) of diverse size, shape, and application. We report an environmentally friendly method to synthesize Ag NPs where no physical reaction conditions were employed. Hydroxypropylcellulose (HPC) was used as a template nanoreactor, stabilizer, and capping agent to obtain Ag NPs. Different concentrations of AgNO3 solutions (50 mmol, 75 mmol, and 100 mmol) were mixed with a concentrated aqueous solution of HPC and the progress of the reaction was monitored by noting color changes of the reaction mixture at different reaction times for up to 24 hours. Characteristic ultraviolet-visible spectroscopy (UV/Vis) absorption bands of Ag NPs were observed in the range of 388-452 nm. The morphology of the Ag NPs was studied by scanning electron microscopy, transmission electron microscopy (TEM), and atomic force microscopy. The TEM images confirmed that the size of the Ag NPs was in the range of 25-55 nm. Powder X-ray diffraction studies showed that the crystal phase of the Ag NPs was face-centered cubic. The as-prepared Ag NPs were found to be stable, and no changes in size and morphology were observed after storage in HPC thin films over 1 year, as indicated by UV/Vis spectra. So, the present work furnishes a green and economical strategy for the synthesis and storage of stable Ag NPs. As-synthesized Ag NPs showed significant antimicrobial activity against different bacterial (Escherichia coli, Staphylococcus epidermidis, S. aureus, Bacillus subtilis, Pseudomonas aeruginosa) and fungal strains (Actinomycetes and Aspergillus niger).

Self-cleaning antimicrobial surfaces by bio-enabled growth of SnO2 coatings on glass.

Conventional vapor-deposition techniques for coatings require sophisticated equipment and/or high-temperature resistant substrates. Therefore bio-inspired techniques for the fabrication of inorganic coatings have been developed in recent years. Inspired by the biology behind the formation of the intricate skeletons of diatoms orchestrated by a class of cationic polyamines (silaffins) we have used surface-bound spermine, a naturally occurring polyamine, to promote the fast deposition of homogeneous, thin and transparent biomimetic SnO2 coatings on glass surfaces. The bio-enabled SnO2 film is highly photoactive, i.e. it generates superoxide radicals (O2˙(-)) upon sunlight exposure resulting in a strong degradation of organic contaminants and a strong antimicrobial activity. Upon illumination the biomimetic SnO2 coating exhibits a switchable amphiphilic behavior, which - in combination with its photoactivity - creates a self-cleaning surface. The intrinsic self-cleaning properties could lead to the development of new protective, antifouling coatings on various substrates.

Multi-photon imaging of amine-functionalized silica nanoparticles.

A convenient and simple strategy for preparing water soluble, photoluminescent functionalized silica nanoparticles (M-dots) in the absence of fluorophores or metal doping is demonstrated. These M-dots can be used for bioimaging using one and two-photon microscopy. Because of their high photostability, low toxicity and high biocompatibility compared with Lumidot™ CdSe/ZnS quantum dots, functionalized silica particles are superior alternatives for current bioimaging platforms. Moreover, the presence of a free amine group at the surface of the M-dots allows biomolecule conjugation (e.g. with antibodies, proteins) in a single step for converting these photoluminescent SiO(2) nanoparticles into multifunctional efficient vehicles for theragnostics.

Engineered multifunctional nanotools for biological applications.

Smart multifunctional magnetic nanoparticles are popular candidates for several biological applications owing to their intrinsic magnetic property and diverse applications that range from rare protein separation and biomedical utilization to cancer therapy and diagnostics. A universal protocol, for the development of such nanocarriers, is highly desirable for scientists with different backgrounds so that custom-made multifunctional nanoparticles can be developed to address their needs, among which are the superparamagnetic iron oxide and manganese oxide nanoparticles that are synthesized through high temperature decomposition reactions. However, an interface is needed to present these inorganic materials to biomolecules to enhance their application for different biological use. This compatibility is achieved by introducing a class of multifunctional copolymers. Magnetic nanoparticles are elaborately decorated with copolymers that carry three principle functionalities as follows: (1) dopamine moieties for surface anchorage of metal oxides; (2) dyes for optical detection; and (3) a large variety of functional molecules such as amines or carboxylates for conjugation of various biomolecules (i.e., proteins, nucleic acids, enzymes, etc.). These copolymers, in combination with nanoparticles, serve as a tool box that results in engineered nanotools with customized modifications and functionalities for applications in fields ranging from proteomics -bioseparation to tumor therapy.

Hydrogen peroxide sensors for cellular imaging based on horse radish peroxidase reconstituted on polymer-functionalized TiO2 nanorods.

We describe the reconstitution of apo-horse radish peroxidase (apo-HRP) onto TiO(2) nanorods functionalized with a multifunctional polymer. After functionalization, the horse radish peroxidase (HRP) functionalized TiO(2) nanorods were well dispersible in aqueous solution, catalytically active and biocompatible, and they could be used to quantify and image H(2)O(2) which is a harmful secondary product of cellular metabolism. The shape, size and structure of TiO(2) nanorods (anatase) were analyzed by transmission electron microscopy (TEM), high resolution TEM (HRTEM), electron diffraction (ED) and X-ray diffraction (XRD). The surface functionalization, HRP reconstitution and catalytic activity were confirmed by UV-Vis, FT-IR, CLSM and atomic force microscopy (AFM). Biocompatibility and cellular internalization of active HRP reconstituted TiO(2) nanorods were confirmed by a classical MTT cytotoxicity assay and confocal laser scanning microscopy (CLSM) imaging, respectively. The intracellular localization allowed H(2)O(2) detection, imaging and quantification in HeLa cells. The polymer functionalized hybrid system creates a complete sensor including a "cell positioning system" in each single particle. The flexible synthetic concept with functionalization by post-polymerization modification allows introduction of various dyes for sensitisation at different wavelengths and introduction of various anchor groups for anchoring on different particles.