Modulation of Double Zwitterionic Block Copolymer Aggregates by Zwitterion-Specific Interactions.

Transformable double hydrophilic block copolymer assemblies are valid as a biocompatible smart macromolecular system. The molecular mechanisms in the spontaneous assembly of double zwitterionic diblock copolymers composed of a poly(carboxybetaine methacrylate) (PCB2) and a poly(sulfobetaine methacrylate) (PSB4) chains (PCB2-b-PSB4) were investigated by the modulation of the aggregates in response to nondetergent zwitterions. The PCB2-b-PSB4 diblock copolymers with a high degree of polymerization PSB4 block produced aggregates in salt-free water through "zwitterion-specific" interactions. The PCB2-b-PSB4 aggregates were dissociated by the addition of nondetergent sulfobetaine (SB4) and carboxybetaine (CB2) molecules, while the aggregates showed different aggregation modulation processes for SB4 and CB2. Zwitterions with different charged groups from SB4 and CB2, glycine and taurine, hardly disrupted the PCB2-b-PSB4 aggregates. The PCB2-b-PSB4 aggregate modulation efficiency of SBs associated with the intercharge hydrocarbon spacer length (CSL) rather than the symmetry with the SB in the PSB chain. These zwitterion-specific modulation behaviors were rationalized based on the nature of zwitterions including partial charge density, dipole moment, and hydrophobic interactions depending on the charged groups and CSL.

Synthesis and Hydration Behavior of a Hydrolysis-Resistant Quasi-Choline Phosphate Zwitterionic Polymer.

A hydrolysis-resistant polymer bearing new quasi-choline phosphate (quasi-CP) structures as side groups, poly(2-methacryloyloxyethyl choline methylphosphonate) (PMCPm), was designed and synthesized. Radical polymerization and sub-surface-initiated radical polymerization were used to prepare homopolymer and polymer brush on polymer substrates. Hydrolytic stability and hydrophilicity of the polymer were confirmed by nuclear magnetic resonance and contact angle measurements. Furthermore, the hydration states were investigated using Fourier-transform infrared spectroscopy and differential scanning calorimetry. The similar hydration behavior of PMCPm to poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) sheds light on understanding the interfacial functions of quasi-CP-bearing zwitterionic biomaterials.

Mechanical Stabilization of Deoxyribonucleic Acid Solid Films Based on Hydrated Ionic Liquid.

Solid films of deoxyribonucleic acid (DNA) containing a hydrated ionic liquid, choline dihydrogen phosphate (CDP), were prepared by a solvent-casting method. Thermal properties, aggregation structure, thermal molecular motion, and tensile properties of CDP-containing DNA films were examined by thermogravimetry (TG), wide-angle X-ray diffraction (WAXD) measurement, dynamic mechanical analysis (DMA), and tensile tests, respectively. The water retentivity of the films at room temperature was much improved with CDP. The packing density of DNA helical chains clearly depended on the amount of CDP in the film. A small amount of CDP contributed to the suppression of the BI → BII conformational transition and the cooperative motion of the DNA duplex in the film. The tensile properties of the film drastically changed in the presence of CDP. When the amount of hydrated CDP in the film increased, the mechanical response of the film changed from glassy-like to rubbery-like via a semicrystalline-like state. The above results make it clear that CDP plays two major roles as a water absorber and plasticizer in the DNA film. Thus, it can be concluded that the use of an ionic liquid as an additive significantly increases the possibility of using a DNA solid film as a structural material.

Organic-Inorganic Hybrid Films Fabricated from Cellulose Fibers and Imogolite Nanotubes.

Owing to the increasing environmental awareness, nanocellulose/natural clay composites with improved mechanical performance have attracted growing interest due to their eco-friendly properties. In this study, hybrid films composed of cellulose fibers (CFs) and imogolite nanotubes (natural aluminosilicate nanotubes) were fabricated. We mainly studied the structure, density, and properties of the hybrid materials. Specifically, the hybrid materials were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), a rheological test, and wide-angle X-ray diffraction (WAXD). The mechanical properties of the hybrid materials were measured by a tensile test, which demonstrated that the mechanical properties of the hybrid films were considerably improved by the addition of imogolite up to 1 wt %; meanwhile, the thermal-mechanical properties of the hybrid film were also enhanced.

Morphological investigation of midblock-sulfonated block ionomers prepared from solvents differing in polarity.

Recent developments regarding charged multiblock copolymers that can form physical networks and exhibit robust mechanical properties herald new and exciting opportunities for contemporary technologies requiring amphiphilic attributes. Due to the presence of strong interactions, however, control over the phase behavior of such materials remains challenging, especially since their morphologies can be solvent-templated. In this study, transmission electron microscopy and microtomography are employed to examine the morphological characteristics of midblock-sulfonated pentablock ionomers prepared from solvents differing in polarity. Resultant images confirm that discrete, spherical ion-rich microdomains form in films cast from a relatively nonpolar solvent, whereas an apparently mixed morphology with a continuous ion-rich pathway is generated when the casting solvent is more highly polar. Detailed 3D analysis of the morphological characteristics confirms the coexistence of hexagonally-packed nonpolar cylinders and lamellae, which facilitates the diffusion of ions and/or other polar species through the nanostructured medium.

Dispersion and reaggregation of nanoparticles in the polypropylene copolymer foamed by supercritical carbon dioxide.

For the preparation of nanocomposites, we conducted environmentally benign foaming processing on polypropylene (PP) copolymer/clay nanocomposites via a batch process in an autoclave. We investigated the dispersion and the exfoliation of the nanoclay particles. Full exfoliation was achieved by the foamability of the matrix PP copolymer using supercritical carbon dioxide (sc CO2) and subcritical carbon dioxide (sub CO2). More and smaller cells were observed when the clay was blended as heterogeneous nuclei and sc CO2 was used. Small angle X-ray scattering showed that highly dispersed states (exfoliation) of the clay particles were obtained by the foaming process. Since the clay particles provided more nucleating sites for the foaming of the polymer, a well dispersed (or fully exfoliated) nanocomposite exhibited a higher cell density and a smaller cell size at the same clay particle concentration. Expansion of the adsorbed CO2 facilitated the exfoliation of the clay platelets; thus, sc CO2 at lower temperature was more efficient for uniform foaming-cell production. Fully dispersed clay platelets were, however, re-aggregated when subjected to a further melting processing. The reprocessed nanocomposites still had some exfoliated platelets as well as some aggregated intercalates. The dual role of the nanoclay particles as foaming nucleus and a crystallization nucleus was confirmed by cell growth observation and nonisothermal crystallization kinetics analysis. A low foaming temperature and a high saturation pressure were more favorable for obtaining a uniform foam. The PP copolymer was found to be foamed more easily than polypropylene. A small amount of other olefin moieties in the backbone of the polymer facilitated better foamability than the neat polypropylene.

Biomimetic dopamine derivative for selective polymer modification of halloysite nanotube lumen.

We demonstrate the use of a catecholic anchor (Dopa) for selective modification of the inner surface of an halloysite clay nanotube. Aqueous Dopa binds to alumina at the tube lumen and does not bind the silica surface under the same conditions. Selectivity of surface modification was evidenced using X-ray photoelectron spectroscopy (XPS) and (13)C solid state NMR spectroscopy. Surface-initiated atom transfer radical polymerization (SI-ATRP) was performed through selectively adsorbed Dopa to graft a layer of polymer brush into the nanotube lumen.

Wettability and antifouling behavior on the surfaces of superhydrophilic polymer brushes.

The surface wettabilities of polymer brushes with hydrophobic and hydrophilic functional groups were discussed on the basis of conventional static and dynamic contact angle measurements of water and hexadecane in air and captive bubble measurements in water. Various types of high-density polymer brushes with nonionic and ionic functional groups were prepared on a silicon wafer by surface-initiated atom-transfer radical polymerization. The surface free energies of the brushes were estimated by Owens-Wendt equation using the contact angles of various probe liquids with different polarities. The decrease in the water contact angle corresponded to the polarity of fluoroalkyl, hydroxy, ethylene oxide, amino, carboxylic acid, ammonium salt, sulfonate, carboxybetaine, sulfobetaine, and phosphobetaine functional groups. The poly(2-perfluorooctylethyl acrylate) brush had a low surface free energy of approximately 8.7 mN/m, but the polyelectrolyte brushes revealed much higher surface free energies of 70-74 mN/m, close to the value for water. Polyelectrolyte brushes repelled both air bubbles and hexadecane in water. Even when the silicone oil was spread on the polyelectrolyte brush surfaces in air, once they were immersed in water, the oil quickly rolled up and detached from the brush surface. The oil detachment behavior observed on the superhydrophilic polyelectrolyte brush in water was explained by the low adhesion force between the brush and the oil, which could contribute to its excellent antifouling and self-cleaning properties.

Neutron Reflectometry & Simultaneous Measurements of Rheology and Small Angle Neutron Scattering Studies for Polyether Modified Silicone Vesicle Systems.

Polyethyleneglycol 12 mol / polydimethylsiloxane co-polymer (PEG-12 dimethicone) is a type of polyether modified silicone (PEMS), which can form a lamellar liquid crystalline phase, and is widely used in cosmetics. The structural changes of PEG-12 dimethicone caused by water contents as well as shear flow were evaluated using simultaneous measurements of rheology and small angle neutron scattering (Rheo-SANS) and neutron reflectometry (NR). At high PEG-12 dimethicone concentrations (≥ 36 wt%), a reorientation of plate-like lamellar structures were observed and the neutral orientation was the most favorable. However, lamella-to-vesicle transitions were hardly observed. PEG-12 dimethicone turned out to form a bi-layer on a hydrophilized Si-wafer in a similar manner to that in bulk though the structure had a certain level of roughness.

Circular Polarization Luminescence of Groove Anchor Driving Optically Active Poly(methyl methacrylate) Stereocomplexes.

This paper presents a facile method for fabricating a thin-film sample with a high asymmetry value of induced circularly polarized luminescence (iCPL) (|glum| = 2.0 × 10-3). The method involves mixing stereoregular poly(methyl methacrylate) (PMMA) and chiral chromophore (2,2,2-trifluoro-1-(9-anthryl)ethanol (TFAE)) to form a complex with a dynamic helical conformation of poly(methyl methacrylate) (PMMA) associated with TFAE via hydrogen bonding. This dynamic helical conformation can be stabilized by the stereocomplexation of a pair of stereoregular PMMA, where the TFAE is sandwiched between a double-helix isotactic PMMA and single-helix syndiotactic PMMA, resulting in a preferential one-handed helical conformation with a high value of iCPL from self-assembly.

Tribological properties of hydrophilic polymer brushes under wet conditions.

This article demonstrates a water-lubrication system using high-density hydrophilic polymer brushes consisting of 2,3-dehydroxypropyl methacrylate (DHMA), vinyl alcohol, oligo(ethylene glycol)methyl ether methacrylate, 2-(methacryloyloxy)ethyltrimethylammonium chloride (MTAC), 3-sulfopropyl methacrylate potassium salt (SPMK), and 2-methacryloyloxyethyl phosphorylcholine (MPC) prepared by surface-initiated controlled radical polymerization. Macroscopic frictional properties of brush surfaces were characterized by sliding a glass ball probe in water using a ball-on-plate type tribotester under the load of 0.1-0.49 N at the sliding velocity of 10(-5)-10(-1) m s(-1) at 298 K. A poly(DHMA) brush showed a relatively larger friction coefficient in water, whereas the polyelectrolyte brushes, such as poly(SPMK) and poly(MPC), revealed significantly low friction coefficients below 0.02 in water and in humid air conditions. A drastic reduction in the friction coefficient of polyelectrolyte brushes in aqueous solution was observed at around 10(-3)-10(-2) m s(-1) owing to the hydrodynamic lubrication effect, however, an increase in salt concentration in the aqueous solution led to the increase in the friction coefficients of poly(MTAC) and poly(SPMK) brushes. The poly(SPMK) brush showed a stable and low friction coefficient in water even after sliding over 450 friction cycles, indicating a good wear resistance of the brush film.

Synthesis of a conductive polymer thin film having a choline phosphate side group and its bioadhesive properties.

A conductive polymer thin film having choline phosphate as the side group was prepared. Quartz crystal microbalance (QCM) was employed to evaluate the adsorption of the model protein, bovine serum albumin (BSA), on the films deposited on indium tin oxide (ITO) electrodes. Cell adsorption on the film was evaluated by a fibroblast NIH3T3.

Thermosensitive transparent semi-interpenetrating polymer networks for wound dressing and cell adhesion control.

Thermosensitive, transparent, and flexible semi-interpenetrating polymer networks (semi-IPNs) composed of segmented polyurethane urea/poly(N-isopropylacrylamide) (SPUU/ PNiPAAm) were new class of materials, which holds promise for its potential use as wound dressings. A series of semi-IPNs, obtained via thermal initiated polymerization of NiPAAm, were characterized by infrared spectroscopy (IR), nuclear magnetic resonance (NMR), dynamic viscoelastic measurements, wide-angle X-ray diffraction (WAXD), and mechanical properties. The resulting semi-IPNs were also investigated for their dynamic water contact angles, thermodynamic interaction parameters, in vitro drug release, and cell adhesion and detachment. The semi-IPNs with differing compositions possess good mechanical properties in both dry and hydrated states. In addition, NIH3T3 fibroblasts can attach to and detach from these semi-IPN films with varying temperature. In addition, these film extracts do not show significant cytotoxicity. Therefore, these materials have great potential for the construction of a new generation of dressings and cell transplantation for wound healing.

Ion-Specific Modulation of Interfacial Interaction Potentials between Solid Substrates and Cell-Sized Particles Mediated via Zwitterionic, Super-Hydrophilic Poly(sulfobetaine) Brushes.

Zwitterionic polymer brushes draw increasing attention not only because of their superhydrophilic, self-cleaning capability but also due to their excellent antifouling capacity. We investigated the ion-specific modulation of the interfacial interaction potential via densely packed, uniform poly(sulfobetaine) brushes. The vertical Brownian motion of a cell-sized latex particle was monitored by microinterferometry, yielding the effective interfacial interaction potentials V(Δh) and the autocorrelation function of height fluctuation. The potential curvature V″(Δh) exhibited a monotonic increase according to the increase in monovalent salt concentrations, implying the sharpening of the potential confinement. An opposite tendency was observed in CaCl2 solutions, suggesting that the ion specific modulation cannot be explained by the classical Hofmeister series. When the particle fluctuation was monitored in the presence of free sulfobetaine molecules, the increase in [sulfobetaine] resulted in a distinct increase in hydrodynamic friction. This was never observed in all the other salt solutions, suggesting the interference of zwitterionic pairing of sulfobetaine side chains by the intercalation of sulfobetaine molecules into the brush layer. Furthermore, poly(sulfobetaine) brushes exhibited a very low V″(Δh) and hydrodynamic friction to human erythrocytes, which seems to explain the excellent blood repellency of zwitterionic polymer materials.

Neutron reflectivity study of the swollen structure of polyzwitterion and polyeletrolyte brushes in aqueous solution.

The swollen brush structures of polycation and zwitterionic polymer brushes, such as poly(2-methacryloyloxyethyltrimethylammonium chloride) (PMTAC), poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC), and poly[3-(N-2-methacryloyloxyethyl-N,N-dimethyl)ammonatopropanesulfonate] (PMAPS), in aqueous solutions of various ionic strengths were characterized by neutron reflectivity (NR) measurements. A series of the polyelectrolyte brushes were prepared by surface-initiated controlled radical polymerization on silicon substrates. A high-graft-density PMTAC brush in salt-free water (D2O) adopted a two-region step-like structure consisting of a shrunk region near the Si substrate surface and a diffuse brush region with a relatively stretched chain structure at the solution interface. The diffuse region of PMTAC was reduced with increase in salt (NaCl) concentration. The PMAPS brush in D2O formed a collapsed structure due to the strong molecular interaction between betaine groups, while significant increase in the swollen thickness was observed in salt aqueous solution. In contrast, no change was observed in the depth profile of the swollen PMPC brush in D2O with various salt concentrations. The unique solution behaviors of zwitterionic polymer brushes were described.

Linking experiment and theory for three-dimensional networked binary metal nanoparticle-triblock terpolymer superstructures.

Controlling superstructure of binary nanoparticle mixtures in three dimensions from self-assembly opens enormous opportunities for the design of materials with unique properties. Here we report on how the intimate coupling of synthesis, in-depth electron tomographic characterization and theory enables exquisite control of superstructure in highly ordered porous three-dimensional continuous networks from single and binary mixtures of metal nanoparticles with a triblock terpolymer. Poly(isoprene-block-styrene-block-(N,N-dimethylamino)ethyl methacrylate) is synthesized and used as structure-directing agent for ligand-stabilized platinum and gold nanoparticles. Quantitative analysis provides insights into short- and long-range nanoparticle-nanoparticle correlations, and local and global contributions to structural chirality in the networks. Results provide synthesis criteria for next-generation mesoporous network superstructures from binary nanoparticle mixtures for potential applications in areas including catalysis.

Polyelectrolyte brushes: a novel stable lubrication system in aqueous conditions.

Surface-initiated controlled radical copolymerizations of 2-dimethylaminoethyl methacrylate (DMAEMA), 2-(methacryloyloxy)ethyl phosphorylcholine (MPC), 2-(methacryloyloxy)ethyltrimethylammonium chloride) (MTAC), and 3-sulfopropyl methacrylate potassium salt (SPMK) were carried out on a silicon wafer and glass ball to prepare polyelectrolyte brushes with excellent water wettability. The frictional coefficient of the polymer brushes was recorded on a ball-on-plate type tribometer by linear reciprocating motion of the brush specimen at a selected velocity of 1.5 x 10(-3) m s-1 under a normal load of 0.49 N applied to the stationary glass ball (d = 10 mm) at 298 K. The poly(DMAEMA-co-MPC) brush partially cross-linked by bis(2-iodoethoxy)ethane maintained a relatively low friction coefficient around 0.13 under humid air (RH > 75%) even after 200 friction cycles. The poly(SPMK) brush revealed an extremely low friction coefficient around 0.01 even after 450 friction cycles. We supposed that the abrasion of the brush was prevented owing to the good affinity of the poly(SPMK) brush for water forming a water lubrication layer, and electrostatic repulsive interactions among the brushes bearing sulfonic acid groups. Furthermore, the poly(SPMK-co-MTAC) brush with a chemically cross-linked structure showed a stable low friction coefficient in water even after 1400 friction cycles under a normal load of 139 MPa, indicating that the cross-linking structure improved the wear resistance of the brush layer.

Self-healing of covalently cross-linked polymers by reshuffling thiuram disulfide moieties in air under visible light.

Self-healing of covalently cross-linked polymers under an ambient visible light in the bulk state, in air, at room temperature using radical exchange of thiuram disulfide units is reported. The successful attachment of surfaces of cut pieces proceeded under ambient conditions under exposure to visible light from a commercial tabletop lamp, as confirmed by bending and tensile tests.

Synthesis, characterization and drug release of biocompatible/biodegradable non-toxic poly(urethane urea)s based on poly(epsilon-caprolactone)s and lysine-based diisocyanate.

Segmented poly(urethane urea)s (SPUUs) based on aliphatic diisocyanato (2,6-diisocyanato methyl caproate (lysine-based diisocyanate, LDI)), poly(epsilon-caprolactone diol)s (PCLs) with molecular weights 530, 1250 and 2000, and 1,4-butanediamine were synthesized in absence of catalyst. The resulting SPUUs, with different soft segment length, were characterized by suitable analytical techniques. The synthesized SPUUs had high molecular weights, low glass-transition temperatures (

A dynamic covalent polymer driven by disulfide metathesis under photoirradiation.

A disulfide-containing polyester indicates a dynamic nature in a bulk state based on a disulfide metathesis reaction driven by photoirradiation.