Polylactic Acid/Chitosan Nanoparticles Loading Nifedipine: Characterization Findings and In Vivo Investigation in Animal.

This paper presents the results of zeta potential, water contact angle, atomic force microscopy image, in vitro solubility, and content of heavy metals in polylactic acid (PLA)/chitosan (CS) nanoparticles loading nifedipine. In addition, the In Vivo test of the PLA/CS nanoparticles loading nifedipine in the mice is also one of highlights of this work. The Zeta potential result shows that the charged surface of the PLA/CS nanoparticles loading nifedipine is neutral, negative or complex depending on nifedipine content. Nifedipine plays a role in increase of hydrophobic property, swelling degree and regular surface as well as decrease of surface rough of the nanoparticles. The PLA/CS/nifedipine nanoparticles are dissolved in the solutions with pH 6.8, pH 4.5 and pH 1.2. The In Vivo test of PLA/CS nanoparticles loading nifedipine on mice was evaluated by the change in diastolic pressure, systolic pressure, arterial pressure and heart rate. The obtained results confirm that the PLA/CS nanoparticles loading nifedipine is suitable to apply in the treatment of hypertension patients lately.

The Electrochemical Behavior of TiN/316LSS Material in Simulated Body Fluid Solution.

We report on the fabrication and the electrochemical behavior of TiN film on the 316L stainless steel (316LSS) material in simulated body fluid (SBF) solution for implant application. The characterization results indicate that the coated TiN is completely crystalline with (111) crystal orientation. Electrochemical results of 316LSS and TiN/316LSS material after 21 days of immersion in SBF show that the durability of the TiN/316LSS is much higher than that of 316LSS, which registers a very low corrosion current density (about tens of nA cm(-2)). The formation of hydroxyapatite on the surface of the TiN/316LSS is also confirmed by SEM, EDX, X-ray and IR spectroscopy.

Investigating the Properties and Hydrolysis Ability of Poly-Lactic Acid/Chitosan Nanocomposites Using Polycaprolactone.

Poly-lactic acid (PLA) has been widely applied in the medical field (in biomedicines such as medical capsules, surgical sutures and suture wounds) owing to its high biodegradability, good biocompatibility and ability to be dissolved in common solvents. Chitosan (CS) is an abundant polysaccharide and a cationic polyelectrolyte present in nature. In this study, the combination of PLA and CS has been used to form PLA/CS nanocomposites having the advantages of both the original components. To enhance the dispersibility and compatibility between PLA and CS in the PLA/CS nanocomposites, polycaprolactone (PCL) is added as a compatibilizer. The Fourier Transform Infrared spectroscopies prove the existence of the interactions of PCL with PLA and CS. A more regular dispersion of CS of 200-400 nm particle size, is observed in the PLA matrix of the PLA/CS nanocomposites containing PCL, through the Field Emission Scanning Electron Microscopy images. The appearance of one glass transition temperature (T(g)) value of PLA/CS/PCL nanocomposites occuring between the T(g) values of PLA and CS in DSC diagrams confirms the improvement in the compatibility between PLA and CS, due to the presence of PCL. The TGA result shows that PCL plays an important role in enhancing the thermal stability of PLA/CS/PCL nanocomposites. The hydrolysis of PLA/CS/PCL nanocomposites in alkaline and phosphate buffer solutions was investigated. The obtained results show that the PLA/CS/PCL nanocomposites have slower hydrolysis ability than the PLA/CS composites.

Electrodeposition and Characterization of Hydroxyapatite on TiN/316LSS.

The deposition of TiN on stainless steel substrates may improve the stability and compatibility of this material with bone, which may be advantageously exploited for the elaboration of advanced pros- thetic devices. In this work, TiN-coated 316LSS (by way of DC magnetron sputtering) was used as a starting material for investigating the electrochemical post-deposition of hydroxyapatite (HAp) which has a composition close to that of bone. Electrodeposition was carried out starting from an aqueous medium containing solubilized Ca(NO3)2 and NH4H2PO4 in the presence of H2O2. We report the influence of experimental conditions on the morphology of the obtained HAp coating on TiN/316LSS. The effect of applied potential, temperature, H2O2 concentration, pH and duration of reaction were thoroughly discussed on the basis of X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier Transform Infrared (FTIR) spectroscopy and Energy Dispersive X-ray Spectroscopy (EDX) results. This method appears advantageous for producing HAp-coated implant materials.

Controlling the electrodeposition, morphology and structure of hydroxyapatite coating on 316L stainless steel.

Hydroxyapatite (HAp) coatings were prepared on 316L stainless steel (316LSS) substrates by electrochemical deposition in the solutions containing Ca(NO3)2·4H2O and NH4H2PO4 at different electrolyte concentrations. Along with the effect of precursor concentration, the influence of temperature and H2O2 content on the morphology, structure and composition of the coating was thoroughly discussed with the help of X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectra. The in vitro tests in simulated body fluids (SBF) were carried out and then the morphological and structural changes were estimated by SEM and electrochemical techniques (open circuit potential, polarization curves, Nyquist and Bode spectra measurements). Being simple and cost-effective, this method is advantageous for producing HAp implant materials with good properties/characteristics, aiming towards in vivo biomedical applications.