Identification and Quantification of Micro-Bioplastics in Environmental Samples by Pyrolysis-Gas Chromatography-Mass Spectrometry.

Bioplastics are materials that are biobased and/or biodegradable, but not necessarily both. Concerns about environmental plastic pollution are constantly growing with increasing demand for substituting fossil-based plastics with those made using renewable resource feedstocks. For many conventional bioplastics to completely decompose/degrade, they require specific environmental conditions that are rarely met in natural ecosystems, leading to rapid formation of micro-bioplastics. As global bioplastic production and consumption/use continue to increase, there is growing concern regarding the potential for environmental pollution from micro-bioplastics. However, the actual extent of their environmental occurrence and potential impacts remains unclear, and there is insufficient mass concentration-based quantitative data due to the lack of quantitative analytical methods. This study developed and validated an analytical method coupling pressurized liquid extraction and pyrolysis-gas chromatography-mass spectrometry combined with thermochemolysis to simultaneously identify and quantify five targeted micro-bioplastics (i.e., polylactic acid (PLA), polyhydroxyalkanoate, polybutylene succinate, polycaprolactone, and polybutylene adipate terephthalate (PBAT)) in environmental samples on a polymer-specific mass-based concentration. The recovery of spiked micro-bioplastics in environmental samples (biosolids) ranged from 74 to 116%. The limits of quantification for the target micro-bioplastics were between 0.02 and 0.05 mg/g. PLA and PBAT were commonly detected in wastewater, biosolids, and sediment samples at concentrations between 0.07 and 0.18 mg/g. The presented analytical method enables the accurate identification, quantification, and monitoring of micro-bioplastics in environmental samples. This study quantified five micro-bioplastic types in complex environmental samples for the first time, filling in gaps in our knowledge about bioplastic pollution and providing a useful methodology and important reference data for future research.

Short Depuration of Oysters Intended for Human Consumption Is Effective at Reducing Exposure to Nanoplastics.

Nanoplastics (NPs; <1 µm) have greater availability to marine organisms than microplastics (1-5000 µm). Understanding NP uptake and depuration in marine organisms intended for human consumption is imperative for food safety, but until now it has been limited due to analytical constraints. Oysters (Crassostrea gigas) were exposed to polystyrene NPs doped with palladium (Pd), allowing the measurements of their uptake into tissues by inductively coupled plasma mass spectrometry (ICP-MS) combined with electron microscopy. Oysters were exposed for 6 days (d) to "Smooth" or "Raspberry" NPs, followed by 30 d of depuration with the aim of assessing the NP concentration in C. gigas following exposure, inferring the accumulation and elimination rates, and understanding the clearance of Pd NPs during the depuration period. After 6 d, the most significant accumulation was found in the digestive gland (106.6 and 135.3 µg g-1 dw, for Smooth and Raspberry NPs, respectively) and showed the most evident depuration (elimination rate constant KSmooth = 2 d-1 and KRaspberry = 0.2 d-1). Almost complete depuration of the Raspberry NPs occurred after 30 d. While a post-harvesting depuration period of 24-48 h for oysters could potentially reduce the NP content by 75%, more research to validate these findings, including depuration studies of oysters from the field, is required to inform practices to reduce human exposure through consumption.

Concentrations of Tire Additive Chemicals and Tire Road Wear Particles in an Australian Urban Tributary.

Tire road wear particles (TRWPs) are one of the largest sources of microplastics to the urban environment with recent concerns as they also provide a pathway for additive chemicals to leach into the environment. Stormwater is a major source of TRWPs and associated additives to urban surface water, with additives including the antioxidant derivative N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine-quinone (6PPD-quinone) demonstrating links to aquatic toxicity at environmentally relevant concentrations. The present study used complementary analysis methods to quantify both TRWPs and a suite of known tire additive chemicals (including 6PPD-quinone) to an urban tributary in Australia during severe storm events. Concentrations of additives increased more than 40 times during storms, with a maximum concentration of 2760 ng/L for ∑15additives, 88 ng/L for 6PPD-quinone, and a similar profile observed in each storm. TRWPs were detected during storm peaks with a maximum concentration between 6.4 and 18 mg/L, and concentrations of TRWPs and all additives were highly correlated. Contaminant mass loads to this catchment were estimated as up to 100 g/storm for ∑15additives, 3 g/storm for 6PPD-quinone, and between 252 and 730 kg of TRWPs/storm. While 6PPD-quinone concentrations in this catchment were lower than previous studies, elevated concentrations post storm suggest prolonged aquatic exposure.

Efficient Removal of Perfluorinated Chemicals from Contaminated Water Sources Using Magnetic Fluorinated Polymer Sorbents.

Efficient removal of per- and polyfluoroalkyl substances (PFAS) from contaminated waters is urgently needed to safeguard public and environmental health. In this work, novel magnetic fluorinated polymer sorbents were designed to allow efficient capture of PFAS and fast magnetic recovery of the sorbed material. The new sorbent has superior PFAS removal efficiency compared with the commercially available activated carbon and ion-exchange resins. The removal of the ammonium salt of hexafluoropropylene oxide dimer acid (GenX) reaches >99 % within 30 s, and the estimated sorption capacity was 219 mg g-1 based on the Langmuir model. Robust and efficient regeneration of the magnetic polymer sorbent was confirmed by the repeated sorption and desorption of GenX over four cycles. The sorption of multiple PFAS in two real contaminated water matrices at an environmentally relevant concentration (1 ppb) shows >95 % removal for the majority of PFAS tested in this study.

Multisite Calibration of a Microporous Polyethylene Tube Passive Sampler for Quantifying Drugs in Wastewater.

Passive sampling approaches to monitor licit and illicit drugs of concern in wastewater shows promise as a supplementary sampling technique to grab sampling when conventional composite autosampling may not be possible. Recent studies have assessed the applicability of passive sampling at a single wastewater treatment plant (WWTP). However, it remains unknown whether a single-site calibration can be applied to other WWTPs. This study evaluated the in situ calibration of microporous polyethylene tube passive samplers (MPTs) against simultaneously collected composite samples for 22 different WWTPs. Samples were analyzed for methylamphetamine, amphetamine, hydroxycotinine, cotinine, benzoylecgonine, 3,4-methylenedioxymethamphetamine, and noroxycodone. Estimated rates of chemical uptake (sampling rates) were calculated using the mass accumulated in the samplers, the concentration measured in composite samples, and the duration of deployment. The estimated sampling rates were consistent between WWTPs (>90% within a factor of two) and ranged from 5 mL day-1 (amphetamine) to 9 mL day-1 (noroxycodone). The samplers were effective at estimating analyte concentrations, with 77% of results having a normalized difference to 24 h composite samples of below 30%. Our study suggests that MPT passive samplers provide a tool for the spatiotemporal monitoring of drug use where automated integrative sampling techniques may not be feasible.

Release of Plastics to Australian Land from Biosolids End-Use.

Plastics are contaminants of emerging concern that can enter the environment from multiple sources, including via land application of treated sewage sludge (biosolids). Biosolids samples collected from 82 wastewater treatment plants (WWTPs) across Australia and covering 34% of the population during census week in 2016 were quantitatively analyzed to estimate the release of seven common plastics. Quantitative analysis was performed by pressurized liquid extraction followed by double-shot microfurnace pyrolysis coupled to gas chromatography mass spectrometry. Ninety nine percent of the samples contained plastics (Σ6plastics) at concentrations of between 0.4 and 23.5 mg/g dry weight (median; 10.4 mg/g dry weight), while polycarbonate was not detected in any sample. Per-capita mass loads of plastics (Σ6plastics) released were between 8 and 877 g/person/year across all investigated WWTPs. Polyethylene was the predominant plastic detected, contributing to 69% of Σ6plastics. Based on the concentrations measured, it was projected that around 4700 metric tons (Mt) of plastics are released into the Australian environment through biosolids end-use each year, equating to approximately 200 g/person/year, which represents 0.13% of total plastics use in Australia. Of this, 3700 Mt of plastics are released to agricultural lands and 140 Mt to landscape topsoil. Our results provide a first quantitative per-capita mass loads and emission estimate of plastic types through biosolids end-use.

Quantitative Analysis of Selected Plastics in High-Commercial-Value Australian Seafood by Pyrolysis Gas Chromatography Mass Spectrometry.

Microplastic contamination of the marine environment is widespread, but the extent to which the marine food web is contaminated is not yet known. The aims of this study were to go beyond visual identification techniques and develop and apply a simple seafood sample cleanup, extraction, and quantitative analysis method using pyrolysis gas chromatography mass spectrometry to improve the detection of plastic contamination. This method allows the identification and quantification of polystyrene, polyethylene, polyvinyl chloride, polypropylene, and poly(methyl methacrylate) in the edible portion of five different seafood organisms: oysters, prawns, squid, crabs, and sardines. Polyvinyl chloride was detected in all samples and polyethylene at the highest total concentration of between 0.04 and 2.4 mg g-1 of tissue. Sardines contained the highest total plastic mass concentration (0.3 mg g-1 tissue) and squid the lowest (0.04 mg g-1 tissue). Our findings show that the total concentration of plastics is highly variable among species and that microplastic concentration differs between organisms of the same species. The sources of microplastic exposure, such as packaging and handling with consequent transference and adherence to the tissues, are discussed. This method is a major development in the standardization of plastic quantification techniques used in seafood.

Mass quantification of nanoplastics at wastewater treatment plants by pyrolysis-gas chromatography-mass spectrometry.

Municipal wastewater treatment plants (WWTPs) play a crucial role in the collection and redistribution of plastic particles from both households and industries, contributing to their presence in the environment. Previous studies investigating the levels of plastics in WWTPs, and their removal rates have primarily focused on polymer type, size, shape, colour, and particle count, while comprehensive understanding of the mass concentration of plastic particles, particularly those <1 µm (nanoplastics), remains unclear and lacking. In this study, pyrolysis gas chromatography-mass spectrometry was used to simultaneously determine the mass concentration of nine selected polymers (i.e., polyethylene (PE), polypropylene (PP), polystyrene (PS), poly(ethylene terephthalate) (PET), nylon 6, nylon 66, polyvinylchloride (PVC), poly(methyl methacrylate) (PMMA) and polycarbonate (PC)) below 1 µm in size across the treatment processes or stages of three WWTPs in Australia. All the targeted nanoplastics were detected at concentrations between 0.04 and 7.3 µg/L. Nylon 66 (0.2-7.3 µg/L), PE (0.1-6.6 µg/L), PP (0.1-4.5 µg/L), Nylon 6 (0.1-3.6 µg/L) and PET (0.1-2.2 µg/L), were the predominant polymers in the samples. The mass concentration of the total nanoplastics decreased from 27.7, 18 and 9.1 µg/L in the influent to 1, 1.4 and 0.8 µg/L in the effluent, with approximate removal rates of 96 %, 92 % and 91 % in plants A, B and C, respectively. Based on annual wastewater effluent discharge, it is estimated that approximately 24, 2 and 0.7 kg of nanoplastics are released into the environment per year for WWTPs A, B and C, respectively. This study investigated the mass concentrations and removal rates of nanoplastics with a size range of 0.01-1 µm in wastewater, providing important insight into the pollution levels and distribution patterns of nanoplastics in Australian WWTPs.

Limited exposure of captive Australian marsupials to plastics.

The global concern regarding the ubiquitous presence of plastics in the environment has led to intensified research on the impact of these materials on wildlife. In the Australian context, marsupials represent a unique and diverse group of mammals, yet little is known about their exposures to plastics. This study aimed to assess the contamination levels of seven common plastics (i.e., polystyrene (PS), polycarbonate (PC), poly-(methyl methacrylate) (PMMA), polypropylene (PP), polyethylene terephthalate (PET), polyethylene (PE), and polyvinyl chloride (PVC)) in both the diet and faeces of kangaroos, wallabies and koalas sampled from a sanctuary in Northeastern Australia. Quantitative analysis was performed by pressurized liquid extraction followed by double-shot microfurnace pyrolysis coupled to gas chromatography mass spectrometry. Interestingly, the analysis of the food and faeces samples revealed the absence of detectable plastic particles; with this preliminary finding suggesting a relatively limited exposure of captive Australian marsupials to plastics. This study contributes valuable insights into the current state of plastic contamination in Australian marsupials, shedding light on the limited exposures and potential risks, and highlighting the need for continued monitoring and conservation efforts. The results underscore the importance of proactive measures to mitigate plastic pollution and protect vulnerable wildlife populations in Australia's unique ecosystems.

Tracing the origins of plastics in biosolids: The role of sewerage pipe materials and trade waste.

Plastics are ubiquitous in virtually every environment on earth. While the specific sources of plastics entering wastewater are not well known, growing evidence suggests sewage sludge (biosolids) can be a sink for plastics. One potential source could be the sewerage pipe materials used to transport sewage between premises and wastewater treatment plants (WWTPs). To evaluate the significance of sewerage piping as a source of biosolids plastics concentrations, we compared the proportion of the total network (by length and surface area) of polyethylene (PE), polyvinylchloride (PVC), and polypropylene (PP) pipes from 10 WWTPs against their biosolids mass concentrations (mg plastic/g biosolid). Among the 10 catchments, the percentage of the network consisting of PP piping ranged from 0 to 1 %, with 0.8-21 % for PE, and 8-73 % for PVC. Biosolids plastics concentrations ranged from 0.09 to 8.62 mg/g (mg plastic/g biosolid) for PP and PE, respectively. For all three plastics, there was no significant Pearson correlation (r < 0.4) between the biosolids concentration (dry weight mg/g) and the proportion of the network material of the sewerage piping as plastic (either length or surface area). A comparison of trade waste entering a subset of 6 WWTP showed the highest biosolid principal components analysis (PCA) associations between loads of plastics (g/day) and automotive wash bays, general manufacturing, hospitals, laboratories, food manufacturing, laundry and dry cleaning, and cooling towers. A stepwise regression analysis indicated pipe length and surface area, as well as automotive wash bays and food manufacturing may be significant. While our data gave mixed results on the attribution of the sources of plastics entering WWTPs, it suggests that sewerage infrastructure and trade waste may play some role. Future studies should investigate the leachability of sewerage infrastructure and contributions from specific trade waste categories to determine their significance in plastics entering WWTPs.

Mass quantification of microplastic at wastewater treatment plants by pyrolysis-gas chromatography-mass spectrometry.

Municipal wastewater treatment plants (WWTPs) are a central point of collection of plastic particles from households and industry and for their re-distribution into the environment. Existing studies evaluating levels of plastics in WWTPs, and their removal rates have reported and used data on polymer type, size, shape, colour, and number of plastic particles, while the total mass concentration of plastic particles (especially >1 µm) remains unclear and unknown. To address this knowledge gap, raw influent, effluent, and reference water samples from three WWTPs in Australia were collected to analyse the mass concentrations and removal rates of seven common plastics (>1 µm in size) across the treatment schemes. Quantitative analysis was performed by pressurized liquid extraction followed by pyrolysis coupled to gas chromatography mass spectrometry. Results showed that the total plastic content in the WWTPs raw influent samples was between 840 and 3116 µg/L, resulting in an inflow of between about 2.1 and 196.4 kg/day of the total measured plastics. Overall, >99 % by mass of the plastics entering the three WWTPs from the raw influent was removed during the pre-treatment stages, presumably ending up in the sewage sludge, which means emissions (via treated effluent) from the treatment plants are low. Compared with the raw influent, the plastic mass concentrations in the treated effluents (i.e., Class C, A, and final effluent) from the three WWTPs, as well as the reference water samples within their catchments were below the limits of reporting. Of the five quantified plastic types, polyethylene (PE, 76.4 %), and polyvinylchloride (PVC, 21 %) dominated by mass, while polyethylene terephthalate (PET, 1.9 %), polypropylene (PP, 0.4 %) and polymethyl methacrylate (PMMA, 0.3 %) accounted for a small proportion of the total. Overall, this study investigated the mass concentrations of plastic particles above 1 µm in wastewater and their removal, which provided valuable information regarding the pollution level and distribution characteristics of plastic polymers in Australian WWTPs.

Effects of salinity on the toxicity of ionic silver and Ag-PVP nanoparticles to Tisbe battagliai and Ceramium tenuicorne.

The toxic effects of polyvinylpyrrolidone (PVP) coated silver nanoparticles (Ag-NP(PVP)) and ionic Ag, to Tisbe battagliai (Tb) and Ceramium tenuicorne (Ct) were investigated and the usefulness of standardised marine guidelines for ENP risk assessment were assessed. The toxicity of Ag-NP(PVP) [CtEC(50)=26.6µg/L, TbEC(50)=7.9µg/L] and Ag(+) [CtEC(50)=2312.2µg/L, Tb EC(50)=90.9µg/L] to both test species differed, with the silver ENPs being more toxic. In contrast to Ag(+) the toxicity of Ag-NP(PVP) increased significantly with increasing salinity, however, after thorough characterisation it was not possible to correlate the behaviour of the particles with an increase in toxicity and salinity. The results suggest that the observed toxicity is being elicited by the free ionic silver complexing in solution and also from an unknown potential particle related effect.

Tyre additive chemicals, tyre road wear particles and high production polymers in surface water at 5 urban centres in Queensland, Australia.

Plastics pollution is a global issue impacting every part of our environment. Tyre road wear particle (TRWP) plastics pollution is thought to be one of the largest pollution sources in urban environments. These plastics are also of concern due to the presence of additive chemicals, incorporated during manufacture, that can be released into the surrounding environment. This study aimed to provide information on concentrations of a range of anthropogenic plastics related pollutants in the Australian environment through a scoping study of surface water in 5 key urban centres around Queensland, Australia. Samples were analysed for a suite of 15 common tyre additive chemicals, TRWPs and 6 common high production polymers, and included the new transformation product of concern 6PPD-quinone which has recent reports of causing mass mortality events in certain aquatic species. The additives were ubiquitously detected (2.9-1440 ng/L) with 6PPD-quinone concentrations lower than in previous studies (<0.05-24 ng/L) and TRWPs detected at 18 of the 21 sites (

Occurrence of tire and road wear particles in urban and peri-urban snowbanks, and their potential environmental implications.

According to estimates put forward in multiple studies, tire and road wear particles are one of the largest sources to microplastic contamination in the environment. There are large uncertainties associated with local emissions and transport of tire and road wear particles into environmental compartments, highlighting an urgent need to provide more data on inventories and fluxes of these particles. To our knowledge, the present paper is the first published data on mass concentrations and snow mass load of tire and polymer-modified road wear particles in snow. Roadside snow and meltwater from three different types of roads (peri-urban, urban highway and urban) were analysed by Pyrolysis Gas Chromatography Mass Spectrometry. Tire particle mass concentrations in snow (76.0-14,500 mg/L meltwater), and snow mass loads (222-109,000 mg/m2) varied widely. The concentration ranges of polymer-modified particles were 14.8-9550 mg/L and 50.0-28,800 mg/m2 in snow and meltwater, respectively. Comparing the levels of tire and PMB particles to the total mass of particles, showed that tire and PMB-particles combined only contribute to 5.7% (meltwater) and 5.2% (mass load) of the total mass concentration of particles. The large variation between sites in the study was investigated using redundancy analysis of the possible explanatory variables. Contradictory to previous road studies, speed limit was found to be one of the most important variables explaining the variation in mass concentrations, and not Annual Average Daily Traffic. All identified variables explained 69% and 66%, for meltwater and mass load concentrations, respectively. The results show that roadside snow contain total suspended solids in concentrations far exceeding release limits of tunnel and road runoff, as well as tire particles in concentrations comparable to levels previously reported to cause toxicity effects in organisms. These findings strongly indicate that roadside snow should be treated before release into the environment.

Does size matter? Quantification of plastics associated with size fractionated biosolids.

This study investigated the occurrence and contribution of plastic particles associated with size fractionated biosolids to the total concentration in biosolids (treated sewage sludge) samples collected from 20 wastewater treatment plants (WWTP) across Australia. This was achieved through sequential size fractionation of biosolids samples to quantify the mass concentration of 7 common plastics across a range of biosolids size fractions, including below 25 µm which has not been assessed in many previous studies. Quantitative analysis was performed by pressurized liquid extraction followed by pyrolysis coupled to gas chromatography - mass spectrometry. Of the total quantified plastics (Σ7plastics), the greatest proportion (27%) of the total mass were identified in the nominal <25 µm sized biosolids fraction. Polyethylene dominated the polymer mass in every size fraction, even though profiles varied between WWTPs. When comparing the sum of all sites for each sized biosolids fraction, the plurality of the polyethylene, polyvinyl-chloride, polystyrene, polypropylene, polycarbonate, and polyethylene-terephthalate concentrations were associated with the smallest size fraction (<25 µm). We confirm for the first time the presence of plastic particles in biosolids below a size fraction that is not captured by many methods. This is important, because of the potential greater significance of plastics in the low sizes to environmental and human health.

A novel method for the quantification of tire and polymer-modified bitumen particles in environmental samples by pyrolysis gas chromatography mass spectroscopy.

Tire and road wear particles may constitute the largest source of microplastic particles into the environment. Quantification of these particles are associated with large uncertainties which are in part due to inadequate analytical methods. New methodology is presented in this work to improve the analysis of tire and road wear particles using pyrolysis gas chromatography mass spectrometry. Pyrolysis gas chromatography mass spectrometry of styrene butadiene styrene, a component of polymer-modified bitumen used on road asphalt, produces pyrolysis products identical to those of styrene butadiene rubber and butadiene rubber, which are used in tires. The proposed method uses multiple marker compounds to measure the combined mass of these rubbers in samples and includes an improved step of calculating the amount of tire and road based on the measured rubber content and site-specific traffic data. The method provides good recoveries of 83-92% for a simple matrix (tire) and 88-104% for a complex matrix (road sediment). The validated method was applied to urban snow, road-side soil and gully-pot sediment samples. Concentrations of tire particles in these samples ranged from 0.1 to 17.7 mg/mL (snow) to 0.6-68.3 mg/g (soil/sediment). The concentration of polymer-modified bitumen ranged from 0.03 to 0.42 mg/mL (snow) to 1.3-18.1 mg/g (soil/sediment).

Plastics contamination of store-bought rice.

This study investigated mass concentrations of selected plastics in store-bought rice, the staple of more than half the world's population. Polyethylene, polyethylene terephthalate, poly-(methyl methacrylate), polypropylene, polystyrene and polyvinyl chloride were quantified using pressurized liquid extraction coupled to double-shot pyrolysis gas chromatography/mass spectrometry. Polyethylene, polypropylene and polyethylene terephthalate were quantifiable in the rice samples with polyethylene the most frequently detected (95%). There was no statistical difference between total plastic concentration in paper and plastic packaged rice. Shaking the rice in its packaging had no significant difference on the concentration of plastics. Washing the rice with water significantly reduced plastic contamination. Instant (pre-cooked) rice contained fourfold higher levels of plastics, suggesting that industrial processing potentially increases contamination. A preliminary estimate of the intake of plastic through rice consumption for Australians established 3.7 mg per serve (100 g) if not washed and 2.8 mg if washed. Annual consumption was estimated around 1 g/person.

Quantification of selected microplastics in Australian urban road dust.

Microplastics (1 - 5000 µm) are pervasive in every compartment of our environment. However, little is understood regarding the concentration and size distribution of microplastics in road dust, and how they change in relation to human activity. Within road dust, microplastics move through the environment via atmospheric transportation and stormwater run-off into waterways. Human exposure pathways to road dust include dermal contact, inhalation and ingestion. In this study, road dust along an urban to rural transect within South-East Queensland, Australia was analysed using Accelerated Solvent Extraction followed by pyrolysis Gas Chromatography-Mass Spectrometry (Pyr-GC/MS). Polypropylene, polystyrene, polyethylene terephthalate, polyvinyl chloride, poly (methyl methacrylate) and polyethylene were quantified. Microplastic concentrations ranged from ~0.5 mg/g (rural site) to 6 mg/g (Brisbane city), consisting primarily of polyvinyl chloride (29%) and polyethylene terephthalate (29%). Size fractionation (< 250 µm, 250-500 µm, 500-1000 µm, 1000-2000 µm and 2000-5000 µm) established that the < 250 µm size fraction contained the majority of microplastics by mass (mg/g). Microplastic concentrations in road dust demonstrated a significant relationship with the volume of vehicles (r2 = 0.63), suggesting traffic, as a proxy for human movement, is associated with increased microplastic concentrations in the built environment.

Influence of surface oxidation on the quantification of polypropylene microplastics by pyrolysis gas chromatography mass spectrometry.

The influence of photo-oxidation on the quantification of isotactic polypropylene by Pyrolysis Gas Chromatography/Mass Spectrometry (Pyr-GC/MS) was assessed. Beads (oval shape, ~5 mm) and fragments (irregular shaped, 250-50 µm and 500-1000 µm) were subjected to relatively harsh simulated accelerated weathering conditions (using a filtered xenon-arc reproducing sunlight's full spectrum) for up to 37 and 80 days, respectively. Samples collected (n = 10 replicates for each treatment) at increasing number of weathering days were analysed by Fourier-transform infrared spectroscopy with Attenuated Total Reflection (FTIR-ATR), scanning electron microscopy, and differential scanning calorimetry in order to assess the extent and the rate of degradation. The rate of surface oxidation occurred faster for fragments compared to beads, probably due to their higher surface area. Quantification of the polypropylene trimer (2,4-dimethyl-1-heptene) via double shot Pyr-GC/MS, showed that the signal of the trimer relative to the mass of polypropylene was reduced through weathering with a degradation rate of 1:3 faster for fragments over beads. Signal reduction and carbonyl index were correlated to show that polypropylene with a carbonyl index of ≥13 has a significantly reduced 2,4-dimethyl-1-heptene signal when compared to virgin material. Consequently, the quantification of polypropylene subjected to weathering under harsh conditions may be underestimated by 42% (fragments, carbonyl index: 18) to 49% (beads, carbonyl index: 30) when quantified by Pyr-GC/MS and using virgin polypropylene calibration standards. Pyrolysis at a lower temperature (350 °C) identified six degradation specific markers (oxidation products) that increased in concentration with weathering. Further comparisons between virgin and weathered microplastics may need to be considered to avoid underestimation of microplastic concentrations in future studies.