Comparison of Three-Dimensional and Conventional Orthodontic Imaging Modalities for Localization of Impacted Maxillary Canines in Patients With Alveolar Cleft.

OBJECTIVE: The purpose of this study was to identify which diagnostic parameters related to impacted maxillary canines can be reliably detected by the conventional orthodontic radiographic modalities and which factors need to be assessed by cone-beam computed tomography (CBCT). DESIGN: In this cross-sectional study, 8 orthodontists evaluated 7 parameters related to the position and anatomy of the impacted canines by means of 2-dimensional (2D) records. After 1 month, the same process was repeated by means of CBCT by the same clinicians. SETTING: Qazvin University of Medical Sciences. PATIENTS AND PARTICIPANTS: Thirty-two patients with alveolar cleft and impacted maxillary canines who had CBCT scans, lateral cephalograms, and orthopantomographs as pretreatment records. MAIN OUTCOME MEASURE: The diagnostic accuracy of 2D and 3-dimensional (3D) radiographic modalities was compared with each other and also with the gold standard by 3 radiologists. RESULTS: The diagnostic accuracy of 2D and 3D imaging modalities was not significantly different regarding the mesiodistal inclination of the impacted tooth (P = .09), apex anatomy (P = .10), and mesiodistal position of the apex (P = .19). Cone-beam computed tomography had significantly higher diagnostic accuracy than conventional radiographic modalities regarding overlapping the adjacent tooth (P = .001), labio-palatal and apico-coronal position of the crown tip, and root resorption of the adjacent tooth (P = .01). CONCLUSION: The conventional orthodontic radiographic modalities were as accurate as CBCT for determination of impacted canine inclination, apex anatomy, and mesiodistal position of the apex. Cone-beam computed tomography showed higher diagnostic accuracy for other parameters.

Diagnostic accuracy of conventional orthodontic radiographic modalities and cone-beam computed tomography for localization of impacted maxillary canine teeth.

BACKGROUND: Orthodontic treatment planning for an impacted canine tooth requires accurate information about its position. The aim of this study was to compare the diagnostic accuracy of two conventional orthodontic radiographic modalities with cone-beam computed tomography (CBCT) for localization of impacted maxillary canine teeth. MATERIALS AND METHODS: Panoramic radiographs, lateral cephalograms, and CBCT scans of 30 patients with unilaterally impacted maxillary canine teeth were retrieved from the archives. Eight expert orthodontists evaluated the parameters related to the location of impacted canine teeth by using panoramic radiographs and lateral cephalograms of patients. After 4 weeks, the same parameters were evaluated on CBCT scans of patients. The diagnostic accuracy of conventional modalities and CBCT was compared with each other and also with the gold standard. RESULTS: The conventional radiographic modalities and CBCT had similar accuracy for assessment of the overall inclination (p = 0.11), apex morphology (p = 0.18), and mesiodistal position of the apex (p = 0.12). CBCT had significantly higher accuracy for determination of incisal tip location (p = 0.001), labiopalatal (p = 0.001) and vertical (p = 0.01) position of the crown tip, minimum bone thickness covering the crown (p = 0.001), and root resorption of the adjacent tooth (p = 0.001). CONCLUSION: The combination of panoramic radiographs and lateral cephalograms was sufficiently accurate to assess some diagnostic parameters such as overall inclination, apex morphology, and mesiodistal apex location of impacted canine teeth.

Relationship between Skeletal Malocclusion and Radiomorphometric Indices of the Mandible in Long Face Patients.

This study aimed to assess the relationship between skeletal malocclusion and radiomorphometric indices of the mandible in long face patients. This cross-sectional study evaluated 174 lateral cephalograms and panoramic radiographs of long face patients between the ages of 17 and 30 presenting at the Orthodontics Department of Qazvin Dental School. The gonial angle, antegonial angle, type of antegonial notch, and depth of antegonial notch were measured bilaterally on panoramic radiographs. The correlation between the radiomorphometric parameters and the type of occlusion was analyzed using one-way ANOVA, independent t-test, Chi-square test, and Fisher's exact test (alpha = 0.05). The mean size of gonial angle was significantly different among the three classes of occlusion (p = 0.046), while the difference was not significant regarding the antegonial angle size and antegonial notch depth (p > 0.05). An independent t-test showed that the mean sizes of gonial angle (p = 0.026) and antegonial angle (p = 0.036), and the antegonial notch depth (p = 0.046) in males, were significantly greater than the values in females. According to the Chi-square and Fisher's exact test, the right antegonial notch type was significantly different among the three classes of malocclusion (p = 0.006), while this difference was not significant in the left side (p = 0.318). The right antegonial notch type II was more common in males, while the right antegonial notch type I was more common in females (p = 0.014). According to the results, the indices of gonial angle and type of antegonial notch can be clinically useful for predicting the growth rate of the mandible and designing the appropriate treatment in long face patients.

Salivary Protein and Electrolyte Profiles during Primary Teeth Eruption: A Cross-Sectional Study.

This study aimed to assess the qualitative changes in the saliva during the process of primary teeth eruption. This cross-sectional study was conducted on 147 children from 2 to 48 months, of which 49 were in group A (no erupted primary teeth), 53 were in group B (at least one active erupting primary tooth), and 45 were in group C (eruption of all 20 primary teeth was completed). Salivary proteins were evaluated by sodium dodecyl sulfate electrophoresis with polyacrylamide gel, while the concentrations of salivary sodium, potassium, chloride, and calcium ions were evaluated by ion selective electrodes. The data were analyzed using ANOVA and Bonferroni tests (alpha = 0.05). The concentration of proteins with molecular weights of 20-30 KDa was significantly higher in group A, and it gradually decreased with age. The concentration of proteins with molecular weights of 50-60 KDa in group B was significantly lower than those of groups A and C. The calcium ion concentration in group A was significantly higher than that of the other groups. The concentration of potassium ions was minimal in group C. The proteins and electrolyte profiles of the subjects' saliva changed in the process of primary tooth eruption. The highest concentrations of proteins such as statherin, histatin, P-B peptide, and cystatin and the lowest concentrations of proteins such as amylase were present in group B.

Effect of premolar extraction and anchorage type for orthodontic space closure on upper airway dimensions and position of hyoid bone in adults: a retrospective cephalometric assessment.

Background: This study aimed to assess the effect of premolar extraction and anchorage type for orthodontic space closure on upper airway dimensions and position of hyoid bone in adults by cephalometric assessment. Methods: This retrospective study was conducted on 142 cephalograms of patients who underwent orthodontic treatment with premolar extraction in four groups of (I) 40 class I patients with bimaxillary protrusion and maximum anchorage, (II) 40 class I patients with moderate crowding and anchorage, (III) 40 class II patients with maximum anchorage, and (IV) 22 skeletal class III patients with maximum anchorage. The dimensions of the nasopharynx, velopharynx, oropharynx, and hypopharynx, and hyoid bone position were assessed on pre- and postoperative lateral cephalograms using AudaxCeph v6.1.4.3951 software. Data were analyzed by the Chi-square test, paired t-test, and Pearson's correlation test (alpha = 0.05). Results: A significant reduction in oropharyngeal, velopharyngeal, and hypopharyngeal airway dimensions was noted in groups I, III, and IV (P < 0.001), which was correlated with the magnitude of retraction of upper and lower incisors (r = 0.6 - 0.8). In group II, a significant increase was observed in oropharyngeal and velopharyngeal dimensions (P < 0.001). A significant increase in nasopharyngeal dimensions occurred in all groups (P < 0.001). Also, in groups I and III, the position of hyoid bone changed downwards and backwards, which was correlated with reduction in airway dimensions (r = 0.4 - 0.6). Conclusion: According to the present results, extraction orthodontic treatment affects upper airway dimensions and hyoid bone position. Maximum anchorage decreases airway dimensions while moderate anchorage increases airway dimensions.

Relationship of the Morphology and Size of Sella Turcica with Dental Anomalies and Skeletal Malocclusions.

This study aimed to assess the relationship of the morphology and size of the sella turcica (ST) with dental anomalies and skeletal malocclusions. This cross-sectional study was conducted on records of fixed orthodontic patients treated between 2013 and 2022. Cephalometric analysis was performed to determine the anteroposterior and vertical skeletal patterns. Preoperative panoramic radiographs and lateral cephalograms, intraoral photographs, and primary dental casts of patients were used to detect dental anomalies. Gender, sagittal and vertical skeletal patterns, dental anomalies, and dimensions (length, depth, and diameter), and morphology of the ST were all recorded according to the lateral cephalograms of patients. Data were analyzed using independent t-test, one-way and two-way ANOVA, Chi-square test, and log rank test (alpha = 0.05). The depth and diameter of the ST had no significant correlation with gender (p > 0.05); however, the length of the ST was significantly longer in males than females (p < 0.05). The morphology of the ST had a significant correlation with gender (p < 0.05). The ST morphology had a significant correlation with the anteroposterior skeletal pattern, microdontia, and tooth impaction as well (p < 0.05). The present results revealed a significant correlation of the ST morphology with the anteroposterior skeletal pattern, microdontia, and tooth impaction.

Forensic Gender Determination by Using Mandibular Morphometric Indices an Iranian Population: A Panoramic Radiographic Cross-Sectional Study.

Gender determination is the first step in forensic identification, followed by age and height determination, which are both affected by gender. This study assessed the accuracy of gender estimation using mandibular morphometric indices on panoramic radiographs of an Iranian population. This retrospective study evaluated 290 panoramic radiographs (145 males and 145 females). The maximum and minimum ramus width, coronoid height, condylar height, antegonial angle, antegonial depth, gonial angle, and the superior border of mental foramen were bilaterally measured as well as bicondylar and bigonial breadths using Scanora Lite. Correlation of parameters with gender was analyzed by univariate, multiple, and best models. All indices except for gonial angle were significantly different between males and females and can be used for gender determination according to univariate model. Condylar height, coronoid height, and superior border of mental foramen and ramus were still significantly greater in males than in females after controlling for the effect of confounders (p < 0.05). Based on the best model, a formula including five indices of bicondylar breadth, condylar height, coronoid height, minimum ramus width, and superior border of mental foramen was used for gender determination. Values higher than 56% indicate male gender, while lower values indicate female gender, with 81.38% specificity for correct detection of females and 88.97% sensitivity for correct detection of males. Despite the satisfactory results, future research should focus on larger populations to verify the accuracy of the present findings.

Dentin Thickness of the Danger Zone in the Mesial Roots of the Mandibular Molars: A Cone Beam Computed Tomography Analysis.

BACKGROUND: Mandibular first molars appear to be the most commonly tooth subjected to a root canal treatment, therefore a better understanding of the anatomy critical zones for resistance of this teeth may decrease the treatment's failure rate. So, this study was conducted to evaluate the dentin thickness of the danger zone in mesial roots of mandibular first molars using cone beam computed tomography in an Iranian population. METHODS: In this cross-sectional study, 210 Cone Beam Computed Tomography acquisition of the mandibular first molars were collected from a radiology center in Qazvin. The dentin thickness of the mesial roots (mesiobuccal and mesiolingual canals) was measured from the furcation to 5 mm below. The relationship between the dentin thickness in the danger zone and parameters, like age, gender, placement side, root length, the curvature of the canal, canal type, presence of middle mesial canal, and distance between the orifices of the mesial canals was investigated. Frequency, mean and standard deviation for variables were calculated, and data analysis was done by SPSS using simple and multiple linear regression and Pearson correlation coefficient. Also, two-sample t-test was used to compare mesiobuccal and mesiolingual on two sides. The significant level was also considered at (p < 0.05). RESULTS: The average minimum thickness of danger zone dentin was found to be 0.885 ± 0.259 mm in the mesiobuccal canal and 0.906 ± 0.206 mm in the mesiolingualcanal. Also, the minimum thickness of dentin in the mesiobuccal and mesiolingual canals in the range of 0 to 1 mm from the furcation was more than in other areas. There was no significant relationship between the minimum dentin thickness of the danger zone with gender, placement side, root length, canal type, and mesial canal entrance distance. But with increasing age, the thickness of dentin in the danger zone in the mesiolingualcanal increased significantly (p = 0.008). It was also observed that with the increase in the curvature of the canal, the thickness of the dentin in the danger zone in the mesiobuccal canal decreased (moderately curved (p = 0.008), severely curved (p = 0.046)). In addition, the thickness of the dentin in the mesiobuccal and mesiolingual canal was less in the samples with the middle mesial canal (p = 0.047, 0.044). CONCLUSIONS: Less dentin thickness in the danger zone in the mesial roots of mesiolingual mandibular first molars was seen in younger patients in mesiolingual canal, with a greater degree of canal curvature in the mesiobuccal canal and teeth with a middle mesial canal. Therefore, it is suggested that large taper instruments should be used with more precision to prevent complications.

Detection of vertical root fractures using digitally enhanced images: reverse-contrast and colorization.

Root fracture diagnosis is a clinical difficulty that in most cases can only be detected through radiography. The objective of this study was to compare the diagnostic accuracy of two types of digitally enhanced images (reverse-contrast and colorization) with original digital radiographies in detecting experimental root fractures. Two hundred extracted single-rooted human teeth were endodontically instrumented and then divided in two groups, one control group and one test group, including fractured teeth. Vertical root fractures were experimentally made in the fractured group. The digital image of each tooth was taken, using the paralleling technique. There were three groups of images: (i) original, (ii) reverse contrast, and (iii) colorized. Three experienced dental specialists examined the images with no prior knowledge of the distribution of the root fractures. Two-way analysis of variance was used to assess the differences in accuracy, sensitivity, and specificity of each technique in detecting root fractures. Cohen's kappa coefficients were calculated to investigate the degree of interobserver agreement. The accuracy, sensitivity, and specificity of original images were 67.4%, 66.7%, and 68%, respectively; these amounts were 61.5%, 61%, and 65.5% in reverse contrast images and 66.4%, 70.7%, and 62% in colorized digital radiography. The original images had the best inter observer kappa coefficients (between 0.45 and 0.55). The results showed that the accuracy of original images is better than reverse contrast and colorized images. Use of reverse-contrast and colorization digital images in root fracture detection should be regarded as an adjunct to other diagnostic methods not as a highly critical diagnostic aid.

Evaluation of dentin penetration of three different endodontic sealers in the presence and absence of the smear layer.

INTRODUCTION: A sealer's ability to effectively and stably penetrate the dentinal tubules is an essential factor for selecting an effective root canal obturation material. Evaluation of the sealers' penetration into the dentinal tubules provides valuable data in the endodontic treatment outcome.

In vitro evaluation of Kedo-S and RaCe rotary files compared to hand files in preparing the root canals of primary molar teeth.

BACKGROUND AND AIMS: Considering the advantages of rotary files in instrumenting the root canals of permanent teeth and a lack of adequate data on the use of these systems in primary teeth, the present study aimed to evaluate two rotary files and compare them with hand files in the cleaning efficacy of the root canals of primary molar teeth. MATERIALS AND METHODS: In the present study, three groups of teeth were prepared with Kedo-S paediatric rotary file system, RaCe (reamer with alternating cutting edges), and hand files (n = 40). The groups were evaluated under a stereomicroscope concerning the cleaning efficacy of the files after cleaning the teeth in the apical, middle, and coronal thirds. The data were analyzed with SPSS 24 (IBM Corporation, USA, 2016) using Fisher's exact test and chi-squared test; statistical significance was set at p < 0.05. RESULTS: There were no significant differences in the apical and middle thirds between the different study groups. However, there were significant differences in the coronal third between the hand file and Kedo-S (p = 0.016) and RaCe and Kedo-S (p = 0.001) groups. CONCLUSIONS: The present study showed that Kedo-S files were more effective than RaCe and hand files in the coronal area than the hand and RaCe files.

In vitro antibacterial effect of Pimpinella anisum essential oil on Enterococcus faecalis, Lactobacillus casei, Actinomyces naeslundii, and Aggregatibacter actinomycetemcomitans.

INTRODUCTION: Pimpinellaanisum is a medicinal plant with antimicrobial, antifungal, and anti-oxidative properties. Limited studies have assessed the antibacterial properties of Pimpinellaanisum on oral and dental pathogens.

Effect of Sinus Floor Augmentation with Platelet-Rich Fibrin Versus Allogeneic Bone Graft on Stability of One-Stage Dental Implants: A Split-Mouth Randomized Clinical Trial.

Rehabilitation of an edentulous posterior maxilla with dental implants is challenging, and sinus floor augmentation could be considered as an important surgical procedure for bone augmentation in this region before implant placement. Platelet-rich fibrin (PRF) is a new-generation platelet concentrate with simplified processing: its application in sinus floor augmentation has been widely investigated in literature. However, the biological properties and actual efficacy of this product remain controversial. This study assessed the effect of sinus floor augmentation with PRF versus freeze-dried bone allograft (FDBA) on stability of one-stage dental implants. This split-mouth randomized clinical trial evaluated 10 patients who required bilateral sinus floor augmentation. PRF and L-PRF membrane were used in one quadrant while FDBA and collagen membrane were used in the other quadrant. Implant stability was assessed by resonance frequency analysis (RFA) immediately, and 2, 4, and 6 months after implant placement. The implant stability quotient (ISQ) was compared over time and between the two groups using repeated measures ANOVA and independent sample t-test. The mean ISQ significantly increased over time in both groups (p < 0.001). The increase was greater in the PRF group (p < 0.05). Within the limitations of this study, PRF yielded superior results compared with FDBA regarding the stability of one-stage dental implants.

Pattern of Endodontic Lesions of Maxillary and Mandibular Posterior Teeth: A Cone-Beam Computed Tomography Study.

The pattern of expansion of endodontic lesions in the jaws has been less commonly addressed in the literature. For this reason, the aim of this study is to assess the pattern of endodontic lesions of maxillary and mandibular posterior teeth using cone-beam computed tomography (CBCT). This cross-sectional study was conducted on 317 endodontic lesions of posterior teeth on CBCT scans retrieved from a radiology center in Qazvin, Iran, from 2020 to 2022. Endodontic lesions were assessed on sagittal, coronal, and axial sections by an endodontist and dental student using the Romexis software. The largest lesion diameter was measured occluso-apically, mesiodistally, and buccolingually. Lesion size was analyzed based on age, gender, jaw, tooth type, and presence/absence of root filling by independent samples t-tests and a one-way Analysis Of Variannce (ANOVA). The largest diameter of lesions in the maxilla and mandible was recorded in the occluso-apical dimension followed by buccolingual and mesiodistal dimensions (p > 0.05). The pattern of lesions was the same in teeth with and without endodontic treatment, but it was significantly different in maxillary and mandibular endodontically treated teeth in the occluso-apical and buccolingual dimensions (p < 0.05). No significant correlation was noted with tooth type or jaw except for maxillary and mandibular first molar lesions, which were significantly different in the occluso-apical dimension (p < 0.05). Lesion size in all three dimensions was significantly greater in males than females (p < 0.05), and was the highest in the occluso-apical dimension in both genders. In the maxilla, the mean lesion size significantly decreased in the mesiodistal dimension with age (p < 0.05). In conclusion, the largest lesion diameter in the maxilla and mandible was found in the occluso-apical dimension, indicating the role of bone density in the pattern of lesions.

Correlation of radiomorphometric indices of the mandible and mandibular angle fractures.

This study assessed the correlation of radiomorphometric indices of the mandible and mandibular angle fractures (MAFs) in an Iranian population. This retrospective study was conducted on 3D computed tomography (CT) scans of 118 patients between 18 to 60 years. The images were divided into two groups with MAFs and other types of mandibular fractures (non-MAF). The gonial angle, ramus height, condylar neck width, minimum ramus width, and mandibular length were all measured using MARCO PACS software. Age, gender, and presence and eruption status of third molar at the fracture side were all recorded. The correlation between these parameters and MAF was analyzed using R software (alpha = 0.05). Of all patients, 41 samples had MAF. The two groups were not significantly different regarding the mean age and gender (P > 0.05). The mean size of gonial angle and ramus height in the MAF group were significantly larger, and smaller than the corresponding values in the non-MAF group, respectively (P < 0.001). The median minimum ramus width in the MAF group was significantly smaller than that in the non-MAF group (P = 0.001). Patients with a large gonial angle had 6.6 times higher odds of MAF compared with other fracture types (P = 0.046). Condylar neck width, mandibular length, and erupted third molars had no significant correlation with type of fracture. Presence of impacted third molar increased the odds of MAF by 5.55 times. Patients with a large gonial angle, short ramus height, minimum ramus width, and impacted third molar are more susceptible to MAF. Surgeons can use these indices to predict the risk of MAF in trauma patients with such facial characteristics, and make a diagnosis by radiographic modalities.

Associations between fear of COVID-19, dental anxiety, and psychological distress among Iranian adolescents.

OBJECTIVES: The present study evaluated the association of fear of COVID-19 with dental anxiety, oral health-related quality of life (OHRQoL), and psychological distress (depression, anxiety and stress), as well as exploring the mediating role of dental anxiety in the association of fear of COVID-19 with OHRQoL and psychological distress. METHODS: A cross-sectional study was conducted among adolescents in high schools of Qazvin city (Iran) from March-June 2021, recruited through a two-stage cluster sampling method. All the adolescents completed a self-administered survey assessing (i) fear of COVID-19, (ii) depression, anxiety and stress, (iii) OHRQoL, and (iv) dental anxiety. Structural equation modelling was used to evaluate all the hypothesised associations, and the model fit was estimated. RESULTS: A total of 2429 adolescents participated in the study. The conceptual model fitted the data well. Fear of COVID-19 had a direct effect on dental anxiety (B = 0.316; bias-corrected bootstrapping 95% CI = 0.282, 0.349), depression (B = 0.302; bias-corrected bootstrapping 95% CI = 0.259, 0.347), anxiety (B = 0.289; bias-corrected bootstrapping 95% CI = 0.246, 0.334), stress (B = 0.282; bias-corrected bootstrapping 95% CI = 0.237, 0.328), and OHRQoL (B = -0.354; bias-corrected bootstrapping 95% CI = -0.530, -0.183). Also, dental anxiety mediated the association of fear of COVID-19 with depression, anxiety stress, and OHRQoL. CONCLUSIONS: High levels of fear of COVID-19 were associated with high levels of dental anxiety and poorer OHRQoL. Moreover, fear of COVID-19 was positively associated with anxiety, depression and stress. Increased levels of dental anxiety were also associated with increased anxiety, stress, depression, and poorer OHRQoL.

Anatomical localization of posterior superior alveolar artery: A retrospective study by cone-beam computed tomography.

BACKGROUND: Familiarity with the anatomy of the arteries in the sinus wall is essential to prevent the perforation of the sinus membrane and bleeding during dental implant surgery. OBJECTIVES: The aim of the study was to evaluate the anatomical position of the posterior superior alveolar artery (PSAA), using cone-beam computed tomography (CBCT). MATERIAL AND METHODS: A total of 245 CBCT scans met the eligibility criteria for this cross-sectional study. The vertical distance from the lower border of the artery to the lower border of the sinus floor, the diameter of the artery, and the type of artery (intrasinusoidal, intraosseous or superficial) in the first and second premolar and molar regions were measured. The data was analyzed with the t tests, the one-way analysis of variance (ANOVA) and the χ2 tests. RESULTS: The maxillary PSAA was recognized in 187 (76.3%) scans. The mean distance between the artery and the floor of the sinus was 6.87 ±3.68 mm. The mean diameter of the artery was 1.37 ±0.61 mm. The greatest mean diameter of the artery was observed in the second premolar region, and the smallest in the first molar region. As many as 63.6% of the arteries were intraosseous, 28.9% intrasinusoidal, and 7.5% superficial. CONCLUSIONS: Due to the high prevalence of the intraosseous type, in most cases of sinus lift surgery there is an increased possibility of PSAA damage. As the largest diameter of the artery was observed in the second premolar region, the possibility of severe bleeding during sinus lift surgery in this area is increased. The average distance between the artery and the floor of the sinus was approx. 7 mm. Consequently, it is recommended that the lower border of the sinus access window should be as high as 7 mm to the floor of the sinus.

Accuracy of Three Types of Apex Locators versus Digital Periapical Radiography for Working Length Determination in Maxillary Premolars: An In Vitro Study.

This study aimed to compare the accuracy of three types of apex locators versus digital radiography for working length (WL) determination. This experimental study was conducted on 58 extracted maxillary premolars. The teeth were decoronated, the access cavity was prepared, and WL was determined using a #15 K-file to serve as reference. The WL was then measured by Woodpex V, Woodpex III, and Root ZX apex locators in the presence of 0.9% saline, and also on a photostimulable phosphor plate (PSP) digital radiograph taken by the parallel technique. The values were compared with the actual WL using the paired t-test (alpha = 0.05). Digital radiography, Root ZX, Woodpex V, and Woodpex III determined the WL within ±0.5 mm from the actual value in 84.48%, 100%, 89.66%, and 87.93% of the cases, respectively. Woodpex V (p = 0.039), Woodpex III (p = 0.001), and Root ZX (p = 0.001) significantly over-estimated the WL. The WL measured on digital radiographs was not significantly different from the actual WL (p = 0.213). The position of the apical foramen (central/lateral) had no significant effect on the accuracy of WL determination by different techniques (p >0.05). Within the limitations of this in vitro study, all the tested modalities showed acceptable accuracy for WL determination in maxillary premolars.

Conventional and digital radiography in vertical root fracture diagnosis: a comparison study.

BACKGROUND: Vertical root fractures (VRFs) can only be detected by radiography. In recent years, direct digital dental radiography (DDR) has become a substitute to film-based radiography. Purpose of this study was to compare accuracy and reliability of charge couple device (CCD)-based direct digital radiography with conventional radiography (CR) in VRF diagnosis. METHODS AND MATERIALS: In this in vitro study, 230 extracted single-rooted human teeth were endodontically instrumented. VRFs were performed experimentally in half of the samples. Each tooth was imaged using the paralleling technique with E-speed film and a CCD-based digital image receptor. Two oral radiologists interpreted the images and repeated the procedure a month later with half of the samples. The accuracy, sensitivity, and specificity of each technique were determined. The reliability and degree of agreement were also determined by the means of Cohen's Kappa analysis. χ² test was used to compare two observers' diagnosis, considering the location of fracture line. RESULTS: The accuracy of CR and DDR was 65% and 70% retrospectively. The sensitivity was 60% for CR, 61% for DDR and the specificity was 70% for CR, 78% for DDR, but the differences were not significant. The interobserver reliability was moderate for CR (K = 0.366, 95% CI) and fair for DDR (K = 0.538, 95% CI). CONCLUSION: No significant difference was seen between the two techniques. The specificity of DDR was slightly better than CR, and their accuracy and sensitivity showed small differences.

Radiographic Position of Impacted Mandibular Third Molars and Their Association with Pathological Conditions.

OBJECTIVES: This study aimed to assess the radiographic position of impacted mandibular third molars (IMTMs) and their association with pathological conditions. MATERIALS AND METHODS: The impaction depth, relationship with ramus, and angulation of 1600 IMTMs and their association with 2nd molar distal caries and root resorption, pathological conditions, and proximity to the mandibular canal were evaluated on panoramic radiographs. The IMTM position was determined based on the depth of impaction according to the Pell and Gregory classification, relationship with ramus according to the Pell and Gregory classification, and angulation according to the Winter's classification. The classical and Bayesian logistic regressions were applied to analyze the effect of IMTM position on the associated complications using the odds ratio (OR) and 95% confidence interval (credible interval for Bayesian models). Two-tailed P value < 0.05 was considered statistically significant. RESULTS: Of 1600 IMTMs evaluated in this study, 195 (12.2%), 252 (15.8%), and 119 (7.4%) had caused second molar distal caries, second molar root resorption, and pathological lesions, respectively, and 872 (54.5%) had contact with the mandibular canal. Impaction angulation was a risk factor for second molar distal caries (maximum OR = 5.01, 95% CI: 3.12-8.18). Changed angulation and greater impaction depth were the risk factors for second molar root resorption (minimum OR = 1.64, 95% CI: 0.58-4.02). Decreased distance between the ramus and distal side of the second molar was a risk factor for associated pathological lesions (minimum OR = 2.73, 95% CI: 1.79-4.25). Mesioangular and horizontal angulations and greater impaction depth were the risk factors for contact with the mandibular canal (maximum OR = 3.44, 95% CI: 2.6-4.57 and minimum OR = 1.3, 95% CI: 094-1.8). CONCLUSIONS: The frequency of complications associated with IMTMs was low, but considerable. The occurrence of these conditions might be affected by the impaction position. Thus, regular follow-ups are recommended in order to be able to surgically intervene when the first signs of pathologies arise.