Fabrication and Characterization of Poly(ε-caprolactone)/α-Cyclodextrin Pseudorotaxane Nanofibers.

Multifunctional scaffolds comprising neat poly(ε-caprolactone) (PCL) and α-cyclodextrin pseudorotaxanated in α-cyclodextrin form have been fabricated using a conventional electrospinning process. Thorough in-depth characterizations were performed on the pseudorotaxane nanofibers prepared from chloroform (CFM) and CFM/dimethylformamide (DMF) utilizing scanning electron microscopy (SEM), transmission electron microscopy (TEM), rheology, differential scanning calorimetry (DSC), thermogravimetric analyses (TGA), wide-angle X-ray diffraction (WAXD), and Instron tensile testing. The results indicate the nanofibers obtained from chloroform retain the rotaxanated structure; while those obtained from CFM/DMF had significantly dethreaded during electrospinning. As a consequence, the nanowebs obtained from CFM showed higher moduli and lower elongations at break compared to neat PCL nanowebs and PCL/α-CD nanowebs electrospun from CFM/DMF.

Coalesced poly(ε-caprolactone) fibers are stronger.

Melt-spun fibers were made from poly(ε-caprolactone) (PCL) coalesced from stoichiometric inclusion complex crystals formed with host urea. Melting and crystallization behaviors, mechanical properties, and the birefringence of undrawn and cold-drawn fibers were investigated. Undrawn coalesced PCL fibers were observed to have 500-600% higher moduli than undrawn as-received (asr) PCL fibers and a modulus comparable to drawn asr PCL fibers. Drawn coalesced PCL fibers have the highest crystallinity, orientation, and 65% higher moduli than drawn asr PCL fibers. Drawn coalesced PCL fibers have only a 5% higher crystallinity than drawn asr PCL fibers, yet they have 65% higher moduli and lower elongation at break values. Clearly, the intrinsic alignment of the coalesced polymers is the reason for their higher moduli and lower elongation, as confirmed by the birefringence observed in drawn coalesced and asr-PCL fibers. The improved mechanical properties of coalesced PCL fibers make them a better candidate for use in tissue engineering as scaffolds.

Poly(ε-caprolactone) nanowebs functionalized with α- and γ-cyclodextrins.

The effects of alpha- and gamma-cyclodextrins (α- and γ-CDs) on the thermal and crystal nucleation behavior of electrospun poly(ε-caprolactone) (PCL) nanofibers have been investigated. PCL/CD composite nanofibers were obtained for the first time by electrospinning the mixture from chloroform/N,N-dimethylformamide (60:40). Scanning electron microscopy analyses indicated that neat PCL nanofibers have an average diameter of 400 nm, which increases with the addition of CDs. The presence of CDs on or in the electrospun PCL fibers in the electrospun mats was investigated using Fourier transform infrared spectroscopy, thermogravimetric analysis, and wide-angle X-ray diffraction analysis. Differential scanning calorimetry showed that the PCL/CD composite fibers exhibit higher crystallization temperatures and sharper crystallization exotherms with increased CD loading, indicating the ability of CDs to nucleate PCL crystallization. Water contact angle (WCA) measurements indicate an inverse relationship between WCA and α- or γ-CD concentration up to 30% loading. Phenolphthalein absorption tests were performed to study the kinetics of their inclusion complex (IC) formation with CDs. Unexpectedly, γ-CD-functionalized nanowebs performed better than α-CD. This might be because at elevated loadings some α-CDs may have threaded over PCL chains and formed ICs, whereas γ-CD did not. With their encapsulation capabilities and their lowered hydrophobicity, PCL/CD composite fibers might have potential uses in medical applications, in particular as wound odor absorbants in dressings, because it is well known that CDs can form ICs with these odorants, thereby effectively removing them.

Chitosan based bioadhesives for biomedical applications: A review.

Due to the promising properties of chitosan for biomedical engineering applications like biodegradability, biocompatibility, and non-toxicity, it is one of the most interesting biopolymers in this field. Therefore, Chitosan and its derivatives have attracted great attention in vast variety of biomedical applications. In the current paper, different types of chitosan-based bioadhesives including passive and active and their different types of external stimuli response structure such as thermo, pH and Light responsive systems are discussed. Different bioadhesives mechanisms with chitosan as an adhesive agent or main polymer component and some examples were also presented. Chitosan based bioadhesives and their potential biomedical applications in drug delivery systems, suture less surgery, wound dressing and hemostatic are also discussed. The results confirmed wound healing, hemostatic and bioadhesion capabilities of the chitosan bioadhesives and its great potential for biomedical applications.

Delivery of pharmaceuticals and other active ingredients with their crystalline cyclodextrin inclusion compounds.

In honor of Prof. Thorsteinn Loftsson's 70th birthday, we offer this personal review of our work using cyclodextrins (CDs) complexed with a variety of active ingredients, including pharmaceuticals, for the purpose of improving their delivery to polymer materials, e.g., fibers, films, hydrogels, etc. Using the affinity of CDs to host and form non-covalent inclusion complexes (ICs) with guest molecules, including a variety of high molecular weight polymers, it is possible to readily deliver these guest molecules into polymer materials via either melt or solution processing of their crystalline or soluble guest molecule-CD-ICs or -rotaxanes. This provides the following advantages: i. CDs are non-toxic, implantable, and biodegradable and have earned the GRAS rating from the FDA. ii. Guest molecules, even those that are neat liquids, can form solid crystalline CD-ICs that are thermally stable to ~ 200 °C and above. This approach permits facile melt-processing into polymer materials for delivery without migration, loss, or degradation of the active guest ingredient. iii. For guests harmful and toxic to their users and the environment, delivery in the form of crystalline CD-ICs can limit any contact with and release of the included toxic guests before they function and are used. iv. It has been demonstrated that, by simple precipitation methods, neat as-received CDs that adopt cage crystal structures can be readily transformed to their columnar crystal structures containing only water in their channels, which can be easily displaced by small molecule, as well as polymer guests. v. Guest-CD-rotaxanes are water soluble, they protect the threaded guest from sources of degradation, and the CD hydroxyl groups may be modified to direct the guest-CD-rotaxane to specific substrates. For these reasons, here we summarize our contributions to the study of CD inclusion and delivery of a variety of guest molecules, including antibacterials, spermicides, insecticides, flame retardants, and dyes, that can more usefully functionalize polymer materials.

Nanoscale Restructuring of Polymer Materials to Produce Single Polymer Composites and Miscible Blends.

I summarize work conducted in our laboratories over the past 30 years using small host molecules to restructure polymer materials at the nanometer level. Certain small molecules, such as the cyclic starches cyclodextrins (CDs) and urea (U) can form non-covalent crystalline inclusion compounds (ICs) with a range of guest molecules, including many polymers. In polymer-CD- and -U-ICs, guest polymer chains reside in narrow channels created by the host molecule crystals, where they are separated and highly extended. When the host crystalline lattice is carefully removed, the guest polymer chains coalesce into a bulk sample with an organization that is distinct from that normally produced from its melt or from solution. Amorphous regions of such coalesced polymer samples have a greater density, likely with less chain entanglement and more chain alignment. As a consequence, after cooling from their melts, coalesced amorphous polymers show glass-transition temperatures (Tgs) that are elevated above those of samples prepared from their solutions or melts. Upon cooling from their melts, coalesced samples of crystallizable polymers show dramatically-increased abilities to crystallize more rapidly and much closer to their melting temperatures (Tms). These unique behaviors of polymers coalesced from their CD- and U-ICs are unexpectedly resistant to extended annealing above their Tgs and Tms. Taking advantage of this behavior permits us to create polymer materials with unique and improved properties. Among these are amorphous polymers with elevated Tgs and semi-crystalline polymers with finer more uniform morphologies. Improved mechanical properties can be achieved through self-nucleation with small amounts of the same polymer made rapidly crystallizable through coalescence from its CD- or U-IC. This can lead to single polymer composites with as-received polymer matrices and self-nucleated reinforcements. Through simultaneous formation and subsequent coalescence from their common CD-ICs, stable well-mixed blends can be achieved between any two or more polymers, despite their inherent immiscibilities. Such coalesced and well-mixed blends are also resistant to phase segregation when heated for extensive periods well above their Tgs and Tms.

Effect of guest hydrophobicity on water sorption behavior of oligomer/alpha-cyclodextrin inclusion complexes.

Cyclomaltohexaose (alpha-cyclodextrin, alpha-CD) can form inclusion complexes (ICs) with polymer molecules in the columnar crystal structure in which alpha-CD molecules stack to form a molecular tube. Complementary water vapor sorption and wide-angle X-ray diffractomery (WAXD) were performed on oligomer/alpha-CD ICs to determine their structures and stabilities. To discern the effect of guest molecule hydrophobicity on water adsorption isotherms, polyethylene glycol (PEG, MW = 600 g/mol) and hexatriacontane (HTC) guests were used. Sorption isotherms for PEG/alpha-CD IC are similar to those obtained for pure alpha-CD and PEG, suggesting the presence of dethreaded PEG in the sample. WAXD collected before and after water vapor sorption of PEG/alpha-CD IC indicated a partial conversion from columnar to cage crystal structure, the thermodynamically preferred structure for pure alpha-CD, due to dethreading of PEG. This behavior does not occur for HTC/alpha-CD IC. Sorption isotherms collected at 20, 30, 40, and 50 degrees C allowed the calculation of the isosteric heats of adsorption and the integral entropies of adsorbed water which are characterized by minima that indicate the monolayer concentration of water in the ICs.

Structural study of irregular amino acid sequences in the heavy chain of Bombyx mori silk fibroin.

Recently, genetic studies have revealed the entire amino acid sequence of Bombyx mori silk fibroin. It is known from X-ray diffraction studies that the beta-sheet crystalline structure (silk II) of fibroin is composed of hexaamino acid sequences of GAGAGS. However, in the heavy chain of B. mori silk fibroin, there are also present 11 irregular sequences, with about 31 amino acid residues (irregular GT approximately GT sequences). The structure and role of these irregular sequences have remained unknown. One of the most frequently appearing irregular sequences was synthesized and its 3-D solution structure was studied by high-resolution 2-D NMR techniques. The 3-D structure determined for this peptide shows that it makes a loop structure (distorted omega shape), which implies that the preceding backbone direction is changed by 180 degrees, i.e., reversed, by this sequence. This may facilitate the beta-sheet formation between the crystal-forming building blocks, GAGAGS/GY approximately GY sequences, in the fibroin heavy chain.

Melting and crystallization behaviors of biodegradable polymers enzymatically coalesced from their cyclodextrin inclusion complexes.

Inclusion complexed (IC) and coalesced biodegradable poly(epsilon-caprolactone) (PCL), poly(L-lactic acid) (PLLA), and their diblock copolymer (PCL-b-PLLA) were achieved by forming ICs between host alpha-cyclodextrin(alpha-CD) and guest PCL, PLLA, and PCL-b-PLLA, followed by removing the alpha-CD host with an amylase enzyme. FTIR spectra of the coalesced polymers reveal that the host alpha-CD can be completely removed, without polymer degradation, by treatment with an amylase enzyme. The melting and crystallization behavior of these CD-IC treated polymers, which are crystallizable, biodegradable, and bioabsorbable, are investigated by differential scanning calorimetry (DSC) and polarized optical microscopy. Results show that coalescence increased the crystallinities of the homopolymers but decreased that of the diblock copolymer. The Avrami exponent (n), derived from both isothermal and nonisothermal crystallization models for homo-PCL and -PLLA and the PCL and PLLA blocks in the diblock copolymer samples coalesced from their ICs, is close to 4, indicating homogeneous crystallization, whereas crystallization of the blocks in the as-synthesized diblock copolymer yields an Avrami exponent around 3, indicating heterogeneous crystallization. All of these results demonstrate that the PCL and PLLA homopolymers and blocks in the IC-coalesced samples are more readily and homogeneously crystallized than those in the as-synthesized samples or their physical blend, even though the level of crystallinity in the IC-coalesced diblock copolymer is significantly lower. Moreover, unlike the as-synthesized diblock copolymer, the crystallization of PCL and PLLA blocks in the IC-coalesced diblock copolymer are not influenced by their covalent connection.

Formation of and coalescence from the inclusion complex of a biodegradable block copolymer and alpha-cyclodextrin. 2: A novel way to regulate the biodegradation behavior of biodegradable block copolymers.

A biodegradable block copolymer (PCL-b-PLLA, M(n) = 1.72 x 10(4), M(w)/M(n) = 1.37) of poly(epsilon-caprolactone) (PCL) and poly(L-lactide) (PLLA) with very low crystallinity was obtained by forming the inclusion complex between alpha-cyclodextrin molecules and PCL-b-PLLA followed by coalescence of the guest polymer chains. Films of the as-synthesized and coalesced copolymer samples, PCL and PLLA homopolymers of approximately the same chain lengths as the corresponding blocks of PCL-b-PLLA, and a physical blend of PCL/PLLA homopolymers with the same molar composition as PCL-b-PLLA were prepared by melt-compression molding between Teflon plates. Subsequently, the in vitro biodegradation behavior of these films was studied in phosphate buffer solution containing lipase from Rhizopus arrhizus, by means of ultraviolet spectra, attenuated total reflectance FTIR spectra, differential scanning calorimetry, wide-angle X-ray diffraction measurements, and weight loss analysis. PCL segments were found to degrade much faster than PLLA segments, both in the pure state and in copolymer or blend samples. Consistent with our expectation, suppression of the phase separation, as well as a decrease of crystallinity, in the coalesced copolymer sample led to a much faster enzymatic degradation than that of either as-synthesized copolymer or the PCL/PLLA physical blend sample, especially during the early stages of biodegradation. Thus the biodegradation behavior of biodegradable block copolymers, which is of decisive importance in drug delivery and controlled release systems, may be regulated by the novel and convenient means recently reported by us.(1)

Two-phase channel structures based on alpha-cyclodextrin-polyethylene glycol inclusion complexes.

Wide-angle X-ray scattering observations of alpha-cyclodextrin (CD)-poly(ethylene glycol) (PEG) inclusion complexes (ICs) have shown for the first time that two crystalline columnar modifications (forms I and II) are produced in the process of their formation. This was made possible by precise azimuthal X-ray diffraction scanning of oriented IC samples. Form I is characterized by CDs threaded onto PEG chains and arranged along channels in the order head-to-head/tail-to-tail, while form II is formed by unbound CDs also arranged into columns in a head-to-tail and also possibly a head-to-head/tail-to-tail manner, probably as a result of template crystallization on the form I IC crystals. It was shown that similar structural peculiarities are inherent for channel structures based on ICs obtained with PEG with a wide range of molecular weights (MWs). The characteristic feature of ICs based on PEG, especially with MW > 8000, is the presence of unbound polymer in the composition of the complex. The amount of unbound PEG was shown to rise with increasing MW of PEG, resulting in greater imperfections in the IC crystalline structure. The polyblock structure of ICs based on alpha-CD and PEG was therefore proposed.