A high sensitivity electrochemical sensor based on a dual-template molecularly imprinted polymer for simultaneous determination of clenbuterol hydrochloride and ractopamine.

A nitrogen-doped Fe-MOF shows a high specific surface area and excellent electrical conductivity after high temperature carbonization. A novel electrochemical sensor based on a N@Fe-MOF@C loaded dual-template molecularly imprinted polymer (DTMIP) modified glassy carbon electrode (GCE) was proposed for the rapid and ultra-sensitive simultaneous detection of clenbuterol hydrochloride (CLB) and ractopamine (RAC). N@Fe-MOF@C combined with a MIP significantly enhanced the electrical signal. Cyclic voltammetry (CV) was used to detect CLB and RAC. The electrochemical polymerization was conducted with O-phenylenediamine as the functional monomer and CLB and RAC as template molecules. The factors affecting the sensor response were optimized. Under the optimal experimental conditions, the CV current response showed a linear range of 10-12-8 × 10-9 M for both CLB and RAC, and the detection limit (LOD) for both CLB and RAC was 3.03 × 10-13 M (S/N = 3). This electrochemical sensing system has high sensitivity, selectivity, excellent reproducibility, repeatability and stability. The recoveries of the actual samples (97.4%-101.2%) and reasonable relative standard deviations (RSDs) (1.06%-3.17%) indicate the practicability of the sensor system. The system has high application value in the rapid detection of CLB and RAC in clenbuterol hydrochloride tablets, human urine and raw pork.

Seasonal variation and risk assessment of microplastics in surface water of the Manas River Basin, China.

The ubiquity of microplastics in the environment has caused great influence to ecosystems and seriously threatened human health. To better understand the variation in microplastics in different seasons in an inland freshwater environment and determine the sources of microplastic pollution and its migration features, this study investigated the characteristics of microplastic pollution during dry (April) and wet (July) seasons in surface water of the Manas River Basin, China. The size, color, shape, area distribution and compound composition of microplastics were studied. Moreover, the risk of microplastic contamination was explored based on risk assessment models. The results demonstrated that the degree of pollution caused by microplastic abundance was minor in this study area. The average abundance of microplastics in April (17 ± 4 items/L) was higher than that in July (14 ± 2 items/L). The range in the abundance of microplastics in April and July were 22 ± 5-14 ± 3 items/L and 19 ± 2-10 ± 1 items/L, respectively. Highly hazardous polymers such as Polyvinyl chloride (PVC) and Polycarbonate (PC) have a significant impact on the results of the evaluation of the presence of microplastics. This study is an important reference for understanding the characteristics of the seasonal variation in microplastics in inland freshwater environments and has practical significance, as it will allow relevant agencies to accurately assess the pollution level of microplastics in different seasons. It is of practical significance to understand the sources and sinks of microplastics in inland freshwater environment.

Efficient production and characterization of homopolymeric poly(3-hydroxyvalerate) produced by Bacillus strain PJC48.

Aliphatic polyester, poly(3-hydroxyvalerate) (PHV), is commonly produced as a granular component in bacterial cells of various species. Based on 16S rDNA gene sequence analysis, strain PJC48 was identified as a Bacillus species. The current study is aimed to screen for a high-yield strain that can produce PHV efficiently and to increase PHV product yield by optimizing the fermentative process. We identified a high-producer strain based on Nile red staining. Characterization of the PHV produced by PJC48 by nuclear magnetic resonance spectroscopy revealed that it consisted of (R)-3-hydroxyvalerate monomers. The suggested model was validated by response surface methodology. Optimization of the PHV yield resulted in an increase of 32.75% compared to control, with a maximum production of 1.64 g/L after 48 H.

Occurrence and elimination of antibiotics in three sewage treatment plants with different treatment technologies in Urumqi and Shihezi, Xinjiang.

Fourteen antibiotics, including five quinolones (QNs), five sulfonamides (SAs), and four tetracyclines (TCs), were selected to investigate their occurrence and elimination in three sewage treatment plants (STPs) by employing different treatment technologies in Urumqi (two STPs) and Shihezi (one STP), China. The STP in Shihezi was chosen as representative to investigate the distribution of antibiotics in a sludge-sewage system. Results showed that the concentrations of most detected antibiotics ranged from tens to hundreds of nanograms per liter in influent samples and under 100 ng L-1 in effluent samples. QNs and TCs were dominant species with concentrations of 2.33 mg kg-1 to 3.34 mg kg-1 and 0.36 mg kg-1 to 0.47 mg kg-1 in sludge samples, respectively. The elimination rates of target antibiotics by various STPs ranged from 17% to 100%. The STP with anaerobic/anoxic/aerobic and membrane bio-reactor technology removed antibiotics more efficiently than those with anaerobic/anoxic/oxic and oxidation ditch technology. The elimination capacities of treatment units from the three STPs were also investigated. SAs were mainly degraded in biological treatment units; conversely, QNs and TCs were significantly eliminated in sedimentary treatment units. Ozonation effectively removed remaining antibiotics but not UV and chlorination disinfection in this study.

Evaluation of microplastic pollution in Shihezi city, China, using pine needles as a biological passive sampler.

Microplastic (MP) pollution has attracted much attention. To understand the characteristics of atmospheric MP pollution in Shihezi, Northwest China, this study used pine needles from trees in Shihezi City as passive samplers. MP contamination was found in all pine needle samples, with an average concentration of 16.52 ± 3.76 items/g. MPs were mainly in the shape of fragments (<0.05 mm). Differences in MP pollution were observed in different functional areas. The abundance of MPs in pine needles was the highest on the main traffic road (19.02 ± 2.52 items/g). Spectral analysis showed that the main polymer of MPs was polyethylene (17.2%), followed by polystyrene (15.5%) and polypropylene (13.8%). By analyzing the principal components and spatial distribution, fragments and pellets were found to have similar sources (mainly industrial activities), whereas films and fibers were influenced by traffic flow. The source of films was related to the packaging industry. The purpose of this study was to provide a reference for the future use of pine needles as atmospheric MP passive samplers, for the traceability and prevention of urban atmospheric MP pollution and for the formulation of national atmospheric MP environmental standards.

Microplastic pollution in urban green-belt soil in Shihezi City, China.

The problems are associated with microplastic (MP) pollution of global concern. However, little is known about the pollution characteristics and sources of MPs in urban green-belt soils. Therefore, this study investigated MP pollution in 11 sampling sites (22 green belts) in Shihezi City. The results showed that the abundance of MPs (0.02-5.00 mm) ranged from 287 ± 100 items/kg dw to 3227 ± 155 items/kg dw (mean + SD). Fibers (69.9%) accounted for the majority of MPs, and the MPs were mainly black (36.7%) and 0.02-0.5 mm (64.8%). The main types of MPs were polystyrene (PS) and polyethylene (PE). Compared with agricultural soil, the color and composition of green-belt soil MPs are diverse, which means that the source of green-belt soil MPs is more diverse. In different types of green-belt soil, MP pollution of industrial green land is more serious. Through cluster analysis and spatial distribution, fragments and fibers were found to have similar sources, mainly originating from food and textile industrial activities. This study provides important information for revealing MP pollutions in urban green-belt soils.

Adhesive polydopamine coated avermectin microcapsules for prolonging foliar pesticide retention.

In this work, we report a conceptual strategy for prolonging foliar pesticide retention by using an adhesive polydopamine (PDA) microcapsule to encapsulate avermectin, thereby minimizing its volatilization and improving its residence time on crop surfaces. Polydopamine coated avermectin (Av@PDA) microcapsules were prepared by emulsion interfacial-polymerization and characterized by Fourier transform infrared spectroscopy, energy dispersive X-ray spectroscopy, field-emission scanning electron microscope, and transmission electron microscopy. The in situ synthesis route confers Av@PDA microcapsules with remarkable avermectin loading ability of up to 66.5% (w/w). Kinetic study of avermectin release demonstrated that Av@PDA microcapsules exhibit sustained- and controlled-release properties. The adhesive property of Av@PDA microcapsules on different surfaces was verified by a comparative study between Av@PDA and passivated Av@SiO2 and Av@PDA@SiO2 capsules with silica shell. Moreover, PDA shell could effectively shield UV irradiation and so protect avermectin from photodegradation, making it more applicable for foliar spraying. Meanwhile, it is determinated that Av@PDA microcapsules have good mechanical stability property.