Preparation, characterisation, and pharmacodynamic study of myricetin pH-sensitive liposomes.

AIMS: Myricetin (MYR) was incorporated into pH-sensitive liposomes in order to improve its bioavailability and anti-hyperuricemic activity. METHODS: The MYR pH-sensitive liposomes (MYR liposomes) were prepared using thin film dispersion method, and assessed by particle size (PS), polydispersed index (PDI), zeta potential (ZP), encapsulation efficiency, drug loading, and in vitro release rate. Pharmacokinetics and anti-hyperuricemic activities were also evaluated. RESULTS: The PS, PDI, ZP, encapsulation efficiency, and drug loading of MYR liposomes were 184.34 ± 1.05 nm, 0.215 ± 0.005, -38.46 ± 0.30 mV, 83.42 ± 1.07%w/w, and 6.20 ± 0.31%w/w, respectively. The release rate of MYR liposomes was higher than free MYR, wherein the cumulative value responded to pH. Besides, the Cmax of MYR liposomes was 4.92 ± 0.20 µg/mL. The level of uric acid in the M-L-H group (200 mg/kg) was reduced by 54.74%w/v in comparison with the model group. CONCLUSION: MYR liposomes exhibited pH sensitivity and could potentially enhance the oral bioavailability and anti-hyperuricemic efficacy of MYR.

Preparation, in vitro and in vivo evaluation of pinocembrin-loaded TPGS modified liposomes with enhanced bioavailability and antihyperglycemic activity.

PURPOSE: To prepare polyethylene glycol succinate-vitamin E modified pinocembrin (PCB)-loaded liposomes (PCBT-liposomes) and evaluate PCBT-liposomal pharmacokinetics and antihyperglycemic activity. SIGNIFICANCE: The novel PCBT-liposomes demonstrated a promising application prospect as a nano drug carrier for future research. METHODS: Thin film dispersion was used to prepare PCBT-liposomes. We measured a series of characterization, followed by in vitro cumulative release, in vivo pharmacokinetic study, and antihyperglycemic activity evaluation. RESULTS: PCBT-liposomes displayed spherical and bilayered nanoparticles with mean particle size (roughly 92 nm), negative zeta potential (about -26.650 mV), high drug encapsulation efficiency (87.32 ± 1.34%) and good storage (at 4 or 25 °C) stability during 48 h after hydration. The cumulative release rate of PCBT-liposomes was markedly higher than free PCB in four different pH media. In vivo investigation showed that PCBT-liposomes could obviously improve oral bioavailability of PCB by 1.96 times, whereas the Cmax, MRT0-t, and T1/2 of PCBT-liposomes were roughly 1.700 ± 0.139 µg·mL-1, 12.695 ± 1.647 h, and 14.244 h, respectively. In terms of biochemical analysis, aspartate amino-transferase (AST), alanine amino-transferase (ALT), interleukin-1 (IL-1), and tumor necrosis factor-α (TNF-α) concentrations in serum of diabetic mice were respectively decreased 28.28%, 17.23%, 17.77%, and 8.08% after PCBT-liposomal treatment. CONCLUSION: These results show PCBT-liposomal preparation as an excellent nano-carrier which has the potential to improve water solubility, bioavailability, and antihyperglycemic activity of PCB, amid broadening the application of PCB in the clinical settings.

Pinocembrin polymeric micellar drug delivery system: preparation, characterisation and anti-hyperuricemic activity evaluation.

Aim: Hydrophobic pinocembrin (PCB) was incorporated into a new nano-drug delivery system to enhance solubility, bioavailability and anti-hyperuricemic activity of the drug.Methods: We fabricated PCB loaded polymeric micelles (PCB-FPM) by thin film dispersion method and appropriately determined their physical characteristics. The oral relative bioavailability and anti-hyperuricemic activity of PCB-FPM and free PCB were observed.Results: The optimum particle size of the micelles was 19.90 ± 0.93 nm. PCB-FPM exhibited great stability within 18 days, coupled with lower cytotoxicity and higher biocompatibility. Moreover, the percent cumulative release of PCB-FPM was much higher than free PCB in the dissolution media. The oral bioavailability of PCB-FPM was increased by 2.61 times compared with free PCB. Uric acid (UA) level of rats was reduced in PCB-FPM group (200 mg/kg) by 78.82% comparable to the model control.Conclusion: PCB-FPM may become an ideal strategy to increase oral in-vivo availability and anti-hyperuricemic activity of PCB.

Hyperoside-loaded TPGs/mPEG-PDLLA self-assembled polymeric micelles: preparation, characterization and in vitro/in vivo evaluation.

Hyperoside (Hyp) self-assembled polymeric micelles (Hyp-PMs) were purposely developed to enhance aqueous solubility, in vivo availability and anti-oxidative effect of Hyp. In preparing Hyp-PMs, we employed the thin film dispersion method with the micelles consisting of TPGs and mPEG2000-PDLLA3000. The particle size, polydispersity index and zeta potential of Hyp-PMs were 67.42 ± 1.44 nm, 0.229 ± 0.015 and -18.67 ± 0.576 mV, respectively, coupled with high encapsulation efficiency （EE）of 90.63 ± 1.45% and drug loading (DL) of 6.97 ± 1.56%. Furthermore, the value of critical micelle concentration (CMC) was quite low, which indicated good stability and improved self-assembly ability of Hyp-PMs. Also, trend of in vitro Hyp release from Hyp-PMs demonstrated enhanced solubility of Hyp. Similarly, in comparison with free Hyp, oral bioavailability of Hyp-PMs was improved (about 8 folds) whilst half-life of Hyp-PMs was extended (about 3 folds). In vitro anti-oxidative effect showed obvious strong scavenging DPPH capability of Hyp-PMs, which may be attributed to its smaller size and better solubility. Altogether, Hyp-PMs may serve as a possible strategy to potentially enhance aqueous solubility, bioavailability and anti-oxidative effect of Hyp, which may play a key role in Hyp application in the pharmaceutical industries.

Preparation of Pinocembrin-Loaded F127/MPEG-PDLLA Polymer Micelles and Anti-Osteoporotic Activity.

Pinocembrin (PCB) is 5,7-dihydroxyl flavanone and has multiple pharmacological activities, namely, anti-inflammation, anti-osteoporotic, and so on. However, low water solubility and bioavailability have hindered its application. Herein, we aimed to increase its bioavailability through preparation of F127/MPEG-PDLLA polymer micelles (PCB-M). We characterized the micelles through appropriate attributes such as analysis of particle size (PS), polydispersity (PDI), transmission electron microscopic (TEM) image, stability test, and evaluation of in vitro release of drug. After physical characterization, the respective PS, PDI, and entrapment efficiency (EE) of PCB-M were estimated to be 27.63 ± 0.17 nm, 0.055 ± 0.02, and 90.53 ± 0.01%. Fluorescence probe method was employed to measure critical micelle concentration (CMC) of PCB-M, we observed CMC was low, thereby suggesting that PCB-M had good stability. In vitro release analysis indicated that the rate of cumulative PCB release from PCB-M was greater than 90% in each medium compared with free PCB, which was less than 40%, thus pointing to a significantly improved solubility of PCB. In vivo pharmacokinetic results showed that oral biological availability of PCB-M increased 5.3 folds comparable to free PCB. The effects of PCB on osteoblasts and ALP activities were investigated; subsequently, zebrafish osteoporotic model was established with prednisolone to study the anti-osteoporotic effects of PCB and PCB-M. The results showed that PCB improved osteoporosis with PCB-M being more effective than free PCB. Finally, PCB-M can be used as a promising method to improve the solubility of PCB, while the bioavailability and anti-osteoporotic effect of PCB could be improved, thus laying a foundation for clinical use in the future.

Anti-hyperuricemic property of 6-shogaol via self-micro emulsifying drug delivery system in model rats: formulation design, in vitro and in vivo evaluation.

The prevalence of hyperuricemia is relatively high worldwide, and a great number of patients are suffering from its complications. 6-shogaol, an alkylphenol compound purified from the root of ginger (Zingiber officinale Roscoe), has been proved to possess diverse pharmacological activities. However, its poor aqueous solubility usually leads to low bioavailability, and further clinical applications will be greatly discounted. The current study aimed to formulate a 6-shogaol-loaded-Self Microemulsifying Drug Delivery System (SMEDDS) to amend low aqueous solubility and bioavailability orally, as well as, potentiate the hyperuricemic activity of the 6-shogaol. SMEDDS was developed with central composite design established on a two system components viz., 18.62% W/W ethyl oleate (oil phase) and ratio of tween 80 (surfactant) to PEG 400 (co-surfactant) (1.73:1, W/W). Based on quadratic model, the navigation of the design space could generate spherically-shaped and homogenous droplets with respective mean particle diameter, polydispersity and of 20.00 ± 0.26 nm and 0.18 ± 0.02. The 6-shogaol-SMEDDS showed significant elevation of cumulative release compared with the free 6-shogaol and more importantly a 571.18% increment in the relative oral bioavailability of the drug. The predominant accumulation of 6-shogaol-SMEDDS in the liver suggested hepatic-targeting potentiality of the drug. Oral administration of 6-shogaol-SMEDDS in hyperuricemic rats also significantly decreased uric acid level and xanthine oxidase activity. Histological studies confirmed formulation groups indeed could provide better protection of kidney than free drug groups. Collectively, these findings indicated that the SMEDDS hold much promise in enhancing the oral delivery and therapeutic efficacy of 6-shogaol.

Self-Micro-Emulsifying Controlled Release of Eugenol Pellets: Preparation, In vitro/In vivo Investigation in Beagle Dogs.

This report aimed to formulate self-micro-emulsifying (SMEDDS) controlled-release pellets delivery system to improve aqueous solubility and in vivo availability of eugenol, a main constituent of clove oil with multiple pharmacological activities. The optimal formulation of eugenol-SMEDDS was eugenol: ethyl oleate: cremophor EL: 1, 2-propylene glycol at the ratio of 5:5:12:8. The SMEDDS were observed under transmission electron microscopy (TEM), and the size distribution was measured with dynamic laser light scatting (DLS). The particle size, index of dispersity (PDI), and zeta potential (Z-potential) were 68.8 ± 0.1 nm, 0.285 ± 0.031, and - 11.62 ± 0.63 mV, respectively. Eugenol-SMEDDS exhibited substantial increased in vitro dissolution compared with the free eugenol. The eugenol-SMEDDS sustained-release pellets (eugenol-SMEDDS-SR pellets) comprising of eugenol-SMEDDS, hydroxypropyl methylcellulose (HPMC), microcrystalline cellulose (MCC), and ethyl cellulose (EC) coats were obtained via extrusion spheronization technique. Consequently, the obtained pellets observed under scanning electron microscopy (SEM) showed spherical shape with smooth surface, desirable drug loading capacity (7.18 ± 0.17%), greater stability, and controlled release. Meanwhile, the oral test showed that bioavailability of eugenol in pellets was highly improved 23.6-fold to the free eugenol. Overall, these results suggested that the improvement of the oral bioavailability of eugenol-SMEDDS-SR could be due to the successful incorporation of the drug into SMEDDS.

Enhancement of Oral Bioavailability and Anti-hyperuricemic Activity of Isoliquiritigenin via Self-Microemulsifying Drug Delivery System.

The aim of this study was to develop a self-microemulsifying drug delivery system (SMEDDS) for enhancement of the oral bioavailability of isoliquiritigenin (ISL) as well as evaluate its in vivo anti-hyperuricemic effect in rats. The ISL-loaded self-microemulsifying drug delivery system (ISL-SMEDDS) was comprised of ethyl oleate (EO, oil phase), Tween 80 (surfactant), and PEG 400 (co-surfactant). The ISL-SMEDDS exhibited an acceptable narrow size distribution (44.78 ± 0.35 nm), negative zeta potential (- 10.67 ± 0.86 mV), and high encapsulation efficiency (98.17 ± 0.24%). The in vitro release study indicated that the release rates of the formulation were obviously higher in different release media (HCl, pH 1.2; PBS, pH 6.8; double-distilled water, pH 7.0) compared with the ISL solution. The oral bioavailability of the ISL-SMEDDS was enhanced by 4.71 times in comparison with the free ISL solution. More importantly, ISL-SMEDDS significantly reduced uric acid level by inhibiting xanthine oxidase (XOD) activity in the model rats. Collectively, the prepared ISL-SMEDDS proved to be potential carriers for enhancing the solubility and oral bioavailability of ISL, as well as ameliorating its anti-hyperuricemic effect.

Vitexin loaded mixed polymeric micelles: preparation, optimization, evaluation and anti-osteoporotic effect.

In this regard, we developed vitexin (Vi)-loaded D-ɑ-tocopherol polyethylene glycol succinate, polyvinylpyrrolidone K30 and sodium cholate mixed micelles (Vi-MMs) mainly for improving oral bioavailability and enhancing anti-osteoporotic effect of Vi. Thin layer dispersion method was employed to prepare Vi-MMs, and then the optimal prescription was optimized by the orthogonal design-response surface method, wherein encapsulation efficiency (EE) was used as optimizing index. The physical properties of Vi-MMs such as appearance morphology, particle size, and zeta potential were also characterized. We further analyzed thein-vitrorelease of Vi and Vi-MMs in three media and investigated the pharmacokinetics of Vi and Vi-MMs in rats. Anti-osteoporotic activity of Vi and Vi-MMs was assessed by establishing a zebrafish osteoporosis model with prednisone. Drug loading, EE, particle size and zeta potential of the optimized Vi-MMs were 8.58 ± 0.13%, 93.86 ± 1.79%, 20.41 ± 0.64 nm and -10 ± 0.56 mV, respectively. The optimized Vi-MMs were shaped spherically as exhibited by transmission electron microscopic technique, with evident core shell nano-structure, well dispersed. In all three media, the release rate of Vi-MMs was significantly higher than that of free Vi. The oral bioavailability of Vi-MMs was increased by 5.6-fold compared to free Vi. In addition, alleviation of prednisone induced osteoporosis in zebrafish by Vi-MMs further demonstrated good anti-osteoporotic effect. In summary, Vi-MMs exhibited enhanced bioavailability and anti-osteoporotic effect, which is expected to be potential nanocarrier for Vi applications in drug development.

Enhancement of oral bioavailability and anti-hyperuricemic activity of aloe emodin via novel Soluplus®-glycyrrhizic acid mixed micelle system.

The objective of this study was to fabricate a novel drug delivery system using Soluplus® (polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer) and glycyrrhizic acid to improve solubility, bioavailability, and anti-hyperuricemic activity of aloe emodin (AE). The AE-loaded mixed micelles (AE-M) were prepared by thin-film hydration method. The optimal AE-M contained small-sized (30.13 ± 1.34 nm) particles with high encapsulation efficiency (m/m, %) of 90.3 ± 1.08%. The release rate of AE increased in the micellar formulation than that of free AE in the four media (DDW, pH 7.0; phosphate buffer solution, pH 7.4; phosphate buffer solution, pH 6.8; and hydrochloric acid aqueous solution, pH 1.2). In comparison to free AE, the pharmacokinetic study of AE-M showed that its relative oral bioavailability increased by 3.09 times, indicating that mixed micelles may promote gastrointestinal absorption. More importantly, AE-M effectively reduced uric acid level by inhibiting xanthine oxidase (XOD) activity in model rats. The degree of ankle swelling, serum levels of interleukin (IL)-1, and IL-6-related inflammatory factors levels all decreased in the gouty arthritis model established via monosodium urate (MSU) crystals. Taken together, the AE-M demonstrated the potential to improve the bioavailability, anti-hyperuricemic activity, and anti-inflammation of AE.

Preparation, characterization, pharmacokinetics, and antirenal injury activity studies of Licochalcone A-loaded liposomes.

A liposome of Licochalcone A (LCA-Liposomes) was purposively prepared to ameliorate the low in vivo availability and efficacy of LCA. Physical characterization of LCA-Liposomes was carried out mainly by determining particle size, morphology, zeta potential (Z-potential), and efficiency of LCA encapsulation (EE) via appropriate techniques. Also, the rate of LCA release in vitro and distribution in vivo (plasma and tissues) was evaluated. Evaluation of the antirenal activity of LCA-liposomes was carried out by establishing chronic renal failure (CRF) model in mice through intragastric administration of adenine (200 mg/kg) and subsequent determination of biochemical parameters and examination of tissue sections. Respectively, the mean size of liposomal particles, Z-potential and EE of LCA-Liposomes were 71.78 ± 0.99 nm, -38.49 ± 0.06 mV, and 97.67 ± 1.72%. Pharmacokinetic and tissue distribution studies showed that LCA-Liposomes could improve the availability of LCA in the blood and tissues, whereas during pharmacodynamics studies, the liposome effectively improved the therapeutic effect of LCA on CRF mice by potentially protecting the renal tissues while exhibiting antioxidant activity. In conclusion, LCA-Liposomes could effectively improve the bioavailability of LCA and provide platform for the development of LCA-related functional products. PRACTICAL APPLICATIONS: As a traditional Chinese medicine, licorice is widely used in food and pharmaceutical industries. LCA is a small molecule flavonoid extracted from the root of licorice. In this study, LCA was loaded on liposome carriers, which significantly improved the water solubility and oral bioavailability, and proved that LCA-Liposomes have certain therapeutic effects on chronic renal failure, thereby providing a basis for the development of LCA into drugs or functional food in the future.

Enhancement of oral bioavailability and hypoglycemic activity of liquiritin-loaded precursor liposome.

The purpose of this study was to develop a precursor liposome nano-delivery system for liquiritin (LT) to improve its solubility, oral bioavailability, and efficacy. The characterizations of the particle diameter, zeta potential, polydispersity index (PDI), droplet morphology, drug release in vitro, and oral bioavailability of the prepared LT precursor liposomes (LTMs) were carried out. In addition, streptozotocin intraperitoneal injection successfully induced diabetic mouse model, while the LT hypoglycemic effect, oral glucose tolerance, biochemical parameters and pathological sections were studied. The prepared LTMs were diluted to obtain a clear and transparent solution with a diameter of 91.84 ± 1.85 nm, zeta potential of -38.59 ± 2.65 mV and PDI of 0.215 ± 0.016. The in vitro release of the LTMs was superior to that of the free LT suspension, which may be related to the increased solubility of LT, as well as the small diameter and increased surface area. The obtained pharmacokinetic parameters indicated that the relative oral bioavailability of LTMs was increased by 8.8 times compared with the free LT suspension. Pharmacodynamic studies showed that LTMs effectively improved LT's hypoglycemic effect and diabetes-related organ repair, simultaneously confirmed its antioxidant activity. These results implied that the LTMs was an effective method to improve the solubility, oral bioavailability, and hypoglycemic activity of LT.

Preparation, characterization, pharmacokinetics and anti-hyperuricemia activity studies of myricitrin-loaded proliposomes.

Myricitrin has many pharmacological effects, such as anti-inflammation, liver protection and anti-oxidation. However, its clinical application is limited by poor solubility and low oral bioavailability. The preparation of myricitrin-loaded proliposomes (MPs) was achieved via the combination of thin-film dispersion technique and freeze-drying method. The in vitro release of MPs compared with free myricitrin was measured in different dissolution media while the pharmacokinetic study was also conducted in rats. Moreover, the uric acid-lowering activity of MPs was investigated in the hyperuricemic rat model. The prepared myricitrin appeared to be spherical. Notably, compared with the free myricitrin, the cumulative release in vitro and in vivo oral bioavailability of MPs were markedly increased. Besides, the MPs could significantly lower the serum uric acid level as well as ameliorate liver and kidney damage in hyperuricemic rats compared with the model group. Therefore, the present work supports the fact that MPs improved the oral bioavailability of myricitrin for the prospect of clinical application.

Preparation, in vitro and in vivo evaluation of isoliquiritigenin-loaded TPGS modified proliposomes.

Isoliquiritigenin (ISL) has a great variety of pharmacological effects especially liver cancer therapy, but its poor solubility, bioavailability and liver targeting have limited its clinical use. In order to solve the aforementioned shortcomings, the TPGS-modified proliposomes loaded with ISL (ISL-TPGS-PLP) was prepared in this study. ISL-TPGS-PLP was fabricated via thin-film dispersion method and was characterized by the appearance, particle size, zeta potential and morphology. HPLC was used to evaluate entrapment efficiency (EE), in vitro release and stability of ISL-TPGS-PLP single or combined while appropriate physicochemical parameters were measured with DLS. Meanwhile, the pharmacokinetics and tissue distribution were also studied after oral administration. The results demonstrated that ISL-TPGS-PLP had a mean size of 23.8 ±â€¯0.9 nm, high EE of 97.33 ±â€¯0.40%. More importantly, nearly 90% ISL was released from ISL-TPGS-PLP within 24 h while only 50% was released from ISL suspension. In the pharmacokinetics study, the area under the curve (AUC0-24h) of ISL-TPGS-PLP was 1.53 times higher than that of ISL suspension. The Tissue distribution study showed that the ISL released from ISL-TPGS-PLP was higher in the liver than the free ISL suspension. Altogether, ISL-TPGS-PLP could ameliorate the ISL solubility, bioavailability and liver targeting ability, suggesting that ISL-TPGS-PLP could serve as a promising nanocarrier for liver cancer therapy.