Electrically Accelerated Self-Healable Polyionic Liquid Copolymers.

Electrically accelerated self-healable poly(ionic liquids) copolymers that exhibit resistor-capacitor (RC) circuit properties are developed. At low alternating current (AC) frequencies these materials behave as a resistor (R), whereas at higher frequencies as a capacitor (C). These properties are attributed to a combination of dipolar and electrostatic interactions in (1-[(2-methacryloyloxy)ethyl]-3-butylimidazolium bis(trifluoromethyl-sulfonyl)imide) copolymerized with methyl methacrylate (MMA) monomers to form p(MEBIm-TSFI/MMA)] copolymers. When the monomer molar ratio (MEBIm-TSFI:MMA) is 40/60, these copolymers are capable of undergoing multiple damage-repair cycles and self-healing is accelerated by the application of alternating 1.0-4.0 V electric field (EF). Self-healing in the absence of EFs is facilitated by van der Waals (vdW) interactions, but the application of AC EF induces back and forth movement of charges against the opposing force that result in dithering of electrostatic dipoles giving rise to interchain physical crosslinks. Electrostatic inter- and intrachain interactions facilitated by copolymerization of ionic liquid monomers with typically dielectric acrylic-based monomers result in enhanced cohesive energy densities that accelerate the recovery of vdW forces facilitating self-healing. Incorporating ionic liquids into commodity polymers offers promising uses as green conducting solid polyelectrolytes in self-healable energy storage, energy-harvesting devices, and many other applications.

Recent Advances in Stimuli-Responsive Commodity Polymers.

Known for their adaptability to surroundings, capability of transport control of molecules, or the ability of converting one type of energy to another as a result of external or internal stimuli, responsive polymers play a significant role in advancing scientific discoveries that may lead to an array of diverge applications. This review outlines recent advances in the developments of selected commodity polymers equipped with stimuli-responsiveness to temperature, pH, ionic strength, enzyme or glucose levels, carbon dioxide, water, redox agents, electromagnetic radiation, or electric and magnetic fields. Utilized diverse applications ranging from drug delivery to biosensing, dynamic structural components to color-changing coatings, this review focuses on commodity acrylics, epoxies, esters, carbonates, urethanes, and siloxane-based polymers containing responsive elements built into their architecture. In the context of stimuli-responsive chemistries, current technological advances as well as a critical outline of future opportunities and applications are also tackled.

Stimuli-Responsive Polymeric Nanoparticles.

There is increasing evidence that stimuli-responsive nanomaterials have become significantly critical components of modern materials design and technological developments. Recent advances in synthesis and fabrication of stimuli-responsive polymeric nanoparticles with built-in stimuli-responsive components (Part A) and surface modifications of functional nanoparticles that facilitate responsiveness (Part B) are outlined here. The synthesis and construction of stimuli-responsive spherical, core-shell, concentric, hollow, Janus, gibbous/inverse gibbous, and cocklebur morphologies are discussed in Part A, with the focus on shape, color, or size changes resulting from external stimuli. Although inorganic/metallic nanoparticles exhibit many useful properties, including thermal or electrical conductivity, catalytic activity, or magnetic properties, their assemblies and formation of higher order constructs are often enhanced by surface modifications. Section B focuses on selected surface reactions that lead to responsiveness achieved by decorating nanoparticles with stimuli-responsive polymers. Although grafting-to and grafting-from dominate these synthetic efforts, there are opportunities for developing novel synthetic approaches facilitating controllable recognition, signaling, or sequential responses. Many nanotechnologies utilize a combination of organic and inorganic phases to produce ceramic or metallic nanoparticles. One can envision the development of new properties by combining inorganic (metals, metal oxides) and organic (polymer) phases into one nanoparticle designated as "ceramers" (inorganics) and "metamers" (metallic).

Phage-bacterium war on polymeric surfaces: can surface-anchored bacteriophages eliminate microbial infections?

These studies illustrate synthetic paths to covalently attach T1 and Φ11 bacteriophages (phages) to inert polymeric surfaces while maintaining the bacteriophage's biological activities capable of killing deadly human pathogens. The first step involved the formation of acid (COOH) groups on polyethylene (PE) and polytetrafluoroethylene (PTFE) surfaces using microwave plasma reactions in the presence of maleic anhydride, followed by covalent attachment of T1 and Φ11 species via primary amine groups. The phages effectively retain their biological activity manifested by a rapid infection with their own DNA and effective destruction of Escherichia coli and Staphylococcus aureus human pathogens. These studies show that simultaneous covalent attachment of two biologically active phages effectively destroy both bacterial colonies and eliminate biofilm formation, thus offering an opportunity for an effective combat against multibacterial colonies as well as surface detections of other pathogens.

Covalent attachment of multilayers on poly(tetrafluoroethylene) surfaces.

These studies demonstrate a new approach of producing multifunctionalized coatings on poly(tetrafluoroethylene) (PTFE) surfaces by covalent attachments of multilayers (CAM) of heparin (HP) and poly(ethylene glycol) (PEG). This process can be universally applied to other covalently bonded species and was facilitated by microwave plasma reactions in the presence of maleic anhydride which, upon ring-opening and hydrolysis, provided covalent attachment of COOH groups to PTFE. These studies showed that alternating layers of PEG and HP can be covalently attached to COOH-PTFE surfaces, and the volume concentration and surface density of PEG and HP on the PTFE surface achieved by the CAM were 7.02-6.04 × 10(-3) g/cm(3) (2.1-1.8 × 10(-7) g/cm(2)) and 9.3-8.7 × 10(-3) g/cm(3) (2.8-2.6 × 10(-7) g/cm(2)), respectively. The CAM process may serve numerous applications when the covalent modification of inert polymeric substrates is required and particularly where the presence of bioactive species for biocompatibility enhancement is desirable.

Entropy and interfacial energy driven self-healable polymers.

Although significant advances have been achieved in dynamic reversible covalent and non-covalent bonding chemistries for self-healing polymers, an ultimate goal is to create high strength and stiffness commodity materials capable of repair without intervention under ambient conditions. Here we report the development of mechanically robust thermoplastic polyurethane fibers and films capable of autonomous self-healing under ambient conditions. Two mechanisms of self-healing are identified: viscoelastic shape memory (VESM) driven by conformational entropic energy stored during mechanical damage, and surface energy/tension that drives the reduction of newly generated surface areas created upon damage by shallowing and widening wounds until healed. The type of self-healing mechanism is molecular weight dependent. To the best of our knowledge these materials represent the strongest (Sf = 21 mN/tex, or σf ≈ 22 MPa) and stiffest (J = 300 mN/tex, or E ≈ 320 MPa) self-healing polymers able to repair under typical ambient conditions without intervention. Since two autonomous self-healing mechanisms result from viscoelastic behavior not specific to a particular polymer chemistry, they may serve as general approaches to design of other self-repairing commodity polymers.

Tunable antimicrobial polypropylene surfaces: simultaneous attachment of penicillin (Gram +) and gentamicin (Gram -).

Surface reactions were performed on polypropylene (PP) surfaces to retard the simultaneous growth of Staphylococcus aureus (S. aureus) and Pseudomonas putida (P. putida) bacteria. Microwave plasma reactions in the presence of maleic anhydride (MA) resulted in the formation of acid groups on the surface of PP. Such surfaces were further modified by conducting two parallel reactions: (1) poly(ethylene glycol) (PEG) was attached to COOH groups of the PP surface, followed by penicillin V (PEN) reactions to target S. aureus destruction and (2) diglycidyl PEG was attached, followed by gentamicin (GEN) reactions, to create antimicrobial surfaces targeted at P. putida . Simultaneous gram "+" and gram "-" resistance was obtained by varying the PEN/GEN ratios on such modified PP surfaces, thus providing the controllable degree of gram "+" and gram "-" antimicrobial strength. While spectroscopic analyses revealed chemical attachments of PEN and GEN, the effectiveness against proliferation of S. aureus (Gram +) and P. putida (Gram -) bacteria was determined using liquid culture tests. These studies show for the first time the formation of tunable antimicrobial polypropylene surfaces with controllable strength.

Attachment of ampicillin to expanded poly(tetrafluoroethylene): surface reactions leading to inhibition of microbial growth.

The broad spectrum antibiotic, ampicillin (AM), was reacted to expanded poly (tetrafluoroethylene) (ePTFE) surfaces and resulted in the formation of antimicrobial surfaces effective against gram-positive, Staphylococcus aureus, Bacillus thuringiensis, and Enterococcus faecalis, and gram-negative, Escherichia coli, Pseudomonas putida, and Salmonella enterica bacteria. These ePTFE surface modifications were accomplished by utilization of microwave maleic anhydride (MA) plasma reactions leading to the formation of acid groups, followed by amidation reactions of heterofunctional NH 2/COOH-terminated polyethylene glycol (PEG). The final step, the attachment of AM to the PEG spacer, was achieved by amidation reactions between COOH-terminated PEG and NH 2 groups of AM. This approach protects the COOH-AM functionality and diminishes the possibility of hydrolysis of the antimicrobial active portion of AM. These studies also show that approximately 90% of AM molecules are still covalently attached to PEG-MA-ePTFE surfaces after exposure to the bacteria solutions. Even after a 24 h period, the AM volume concentration changes only from 2.25 to 2.04 microg/m3, and depending upon the bacteria type, the bacteria suspensions containing AM-PEG-MA-ePTFE specimens retain 85-99% of their initial optical density.

Self-repairing oxetane-substituted chitosan polyurethane networks.

Polyurethanes have many properties that qualify them as high-performance polymeric materials, but they still suffer from mechanical damage. We report the development of polyurethane networks that exhibit self-repairing characteristics upon exposure to ultraviolet light. The network consists of an oxetane-substituted chitosan precursor incorporated into a two-component polyurethane. Upon mechanical damage of the network, four-member oxetane rings open to create two reactive ends. When exposed to ultraviolet light, chitosan chain scission occurs, which forms crosslinks with the reactive oxetane ends, thus repairing the network. These materials are capable of repairing themselves in less than an hour and can be used in many coatings applications, ranging from transportation to packaging or fashion and biomedical industries.

Amphiphilic cross-linked networks produced from the vulcanization of nanodomains within thin films of poly(N-vinylpyrrolidinone)-b-poly(isoprene).

Diblock copolymers of poly(N-vinylpyrrolidinone) (PNVP) and poly(isoprene) (PIp) were employed as building blocks for the construction of complex cross-linked networks that present surfaces having amphiphilic character, imparted by covalent trapping of compositionally heterogeneous phase-separated morphologies. The kinetics for the homopolymerization of N-vinylpyrrolidinone by reversible addition-fragmentation chain transfer (RAFT) techniques was studied, and the initially obtained PNVP-based macro-RAFT agents were then extended to PNVP-b-PIp block copolymers. Therefore, the PNVP chain length was held constant at a number-averaged degree of polymerization of 120, while the PIp chain length was varied to afford a series of three PNVP120-b-PIpx block copolymers (where x=710, 53, and 25). These materials were then cross-linked individually using sulfur monochloride, to produce complex amphiphilic networks. The nanoscopically resolved topographies of these films were analyzed using atomic force microscopy, and their compositional heterogeneities were probed by X-ray photoelectron spectroscopy and internal reflectance infrared imaging techniques. Additionally, the surfaces were analyzed to determine the extent of surface reorganization under aqueous conditions.

Molecular recognition at methyl methacrylate/n-butyl acrylate (MMA/nBA) monomer unit boundaries of phospholipids at p-MMA/nBA copolymer surfaces.

Lipid structural features and their interactions with proteins provide a useful vehicle for further advances in membrane proteins research. To mimic one of potential lipid-protein interactions we synthesized poly(methyl methacrylate/ n-butyl acrylate) (p-MMA/nBA) colloidal particles that were stabilized by phospholipid (PLs). Upon the particle coalescence, PL stratification resulted in the formation of surface localized ionic clusters (SLICs). These entities are capable of recognizing MMA/nBA monomer interfaces along the p-MMA/nBA copolymer backbone and form crystalline SLICs at the monomer interface. By utilizing attenuated total reflectance Fourier transform infrared (ATR FT-IR) spectroscopy and selected area electron diffraction (SAD) combined with ab initio calculations, studies were conducted that identified the origin of SLICs as well as their structural features formed on the surface of p-MMA/nBA copolymer films stabilized by 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC) PL. Specific entities responsible for SLIC formation are selective noncovalent bonds of anionic phosphate and cationic quaternary ammonium segments of DLPC that interact with two neighboring carbonyl groups of nBA and MMA monomers of the p-MMA/nBA polymer backbone. To the best of our knowledge this is the first example of molecular recognition facilitated by coalescence of copolymer colloidal particles and the ability of PLs to form SLICs at the boundaries of the neighboring MMA and nBA monomer units of the p-MMA/nBA chain. The dominating noncovalent bonds responsible for the molecular recognition is a combination of H-bonding and electrostatic interactions.

Antibacterial surfaces on expanded polytetrafluoroethylene; penicillin attachment.

Expanded polytetrafluoroethylene (ePTFE) was chemically modified to retard the growth of Staphylococcus aureus bacteria. This was accomplished by microwave plasma reactions in the presence of maleic anhydride (MA) to create acid functional groups on ePTFE surfaces, followed by esterification reactions with 200 and 600 molecular weight linear polyethylene glycol (PEG). Such surfaces were utilized for further reactions with penicillin (PEN) through etherification reactions to create anti-microbial surfaces. These reactions resulted in surface morphological changes, and spectroscopic analysis using attenuated total reflectance Fourier transform infrared spectroscopy (ATR FT-IR) revealed the formation of ester linkages resulting from reactions between PEN and PEG functionalities. Antibacterial activities were evaluated by a series of experiments where PEN-modified ePTFE specimens were immersed in a liquid aureus culture, and the bacteria growth was quantified by measuring % absorbance of the suspension at 600 nm wavelength. The lowest absorbance was observed for the solution containing PEN-PEG-MA-ePTFE specimens, thus showing highly effective anti-bacterial activity toward gram-positive Staphylococcus aureus bacteria. To our best knowledge, this is the first study that shows PEN-ePTFE surface modifications that are effective against gram-positive aureus bacteria.

The effectiveness of antibiotic activity of penicillin attached to expanded poly(tetrafluoroethylene) (ePTFE) surfaces: a quantitative assessment.

Recent studies identified and established a platform of polymer surface modifications allowing the attachment of penicillin (PEN) to expanded poly(tetrafluoroethylene) (ePTFE) surfaces. The effectiveness of this approach was accomplished by creating surfaces with chemically attached PEN that prevent the proliferation of microbes. In this study, quantitative assessments of PEN effectiveness attached to ePTFE were conducted. Using variable-angle attenuated total reflectance (ATR-FTIR) spectroscopy, the volume concentration changes of PEN were determined as a function of depth from the ePTFE surface. At depths ranging from 0.2 to 1.2 mum from the surface, PEN concentration levels decrease from 8.85 to 3.33 mug/m3. Assessments of concentration levels of the colony forming units (CFUs) of Staphylococcus aureus bacteria as a function of contact time with the penicillin-polyethylene glycol spacer separated by maleic anhydride ePTFE (PEN-PEG-MA-ePTFE) surfaces showed profound effectiveness of PEN in preventing microbial proliferation. Hydrolytic stability of PEN-PEG-MA-ePTFE surfaces revealed that even with a 32% loss of PEN due to the cleavage of the ester linkages between PEN and PEG spacer, antimicrobial activity is still maintained.

Lectin-recognizable colloidal dispersions stabilized by n-dodecyl beta-D-maltoside: particle-particle and particle-surface interactions.

Recently, we reported that it is possible to utilize sugars as stabilizing agents for colloidal particles. This study shows that when n-dodecyl beta-D-maltoside (DDM) is utilized as a dispersing and stabilizing agent in the synthesis and stabilization of poly[methyl methacrylate-co-(n-butyl acrylate)] (p-MMA/nBA) colloidal particles, stable colloidal dispersions can be formed. Since understanding of sugar-protein interactions have numerous practical and scientific implications, these studies examine DDM-stabilized p-MMA/nBA colloidal particles and their specific binding properties with concanavalin A (Con A). By use of spectroscopic analysis, unique binding characteristics that are a function of DDM concentration, time, and the concentration of Con A are detected. When DDM-stabilized p-MMA/nBA particles are allowed to coalesce, DDM is released from the particle surfaces and, under suitable conditions, selectively stratifies in the areas of the excess of interfacial energy near the film-air (F-A) interface, thus providing sites for attracting Con A via alpha-glucose-OH hydrogen bonding. Consequently, adsorption of Con A at the F-A interfaces occur and the degree of adsorption is controlled by the amount of DDM at the F-A interface.

Phospholipid-assisted synthesis of stable F-containing colloidal particles and their film formation.

This letter illustrates for the first time the preparation of p-methyl methacrylate/n-butyl acrylate/heptadecafluorodecyl methacrylate (p-MMA/nBA/FMA) colloidal dispersions containing up to 15% w/w FMA, which is accomplished by the utilization of biologically active phospholipids (PLs) and ionic surfactants. The use of monomer-starved conditions during emulsion polymerization and the utilization of 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC), sodium dodecyl sulfate (SDS), and phosphoric acid bis(tridecafluoro-octyl) ester ammonium salt (FSP) as surfactants, which function as transfer and dispersing agents, facilitate a suitable environment for the polymerization of p-MMA/nBA/FMA colloidal dispersions that exhibit nonspherical particle morphologies. Such nonspherical particles upon coalescence form phase-separated films with unique surface properties.

Controlled phospholipid functionalization of single-walled carbon nanotubes.

These studies show that single-walled carbon nanotubes (SWNTs) can be effectively modified using phospholipids. Using a simple surface modification of SWNTs, followed by deposition of 1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphoethanolamine (DCPE) phosphipid, results in stable water-dispersible SWNTs with highly uniform thickness.

Film formation from colloidal dispersions stabilized by sugar derivatives and their controllable release for selective protein adsorption.

Although the use of sugar and sugar derivatives has been documented in polymer research for many years, there are no reports that would utilize these species as polymerization sites of colloidal polymeric particles that, later on, may be released during particle coalescence to form films with surfaces that differentiate protein adsorption. These studies show that, when n-dodecyl-beta-D-maltoside (DDM) is utilized for the synthesis and stabilization of poly[methyl methacrylate-co-(n-butyl acrylate)] (p-MMA/nBA) colloidal particles, upon particle coalescence DDM stratifies near the film-air (F-A) interface. By using attenuated total reflectance Fourier transform infrared (ATR FT-IR) spectroscopy and internal reflection infrared imaging (IRIRI), comparative adsorption studies on p-MMA/nBA surfaces exposed to globulin (Glo), fibrinogen (Fib), and bovine serum albumin (BSA) reveal that the presence of DDM selectively inhibits Glo and Fib adsorption, but does not affect BSA. The presence of DDM also enhances the rate of mobility of sodium dioctylsulfosuccinate (SDOSS) resulting from interactions between DDM and SDOSS moieties, and the surface morphologies change as a result of concentration variations of DDM in the colloidal dispersions.

Photoacoustic FT-IR depth imaging of polymeric surfaces: overcoming IR diffraction limits.

It is well established that the photoacoustic effect based on absorption of electromagnetic radiation into thermal waves allows surface depth profiling. However, limited knowledge exists concerning its spatial resolution. The spiral-stepwise (SSW) approach combined with phase rotational analysis is utilized to determine surface depth profiling of homogeneous and nonhomogeneous multilayered polymeric surfaces in a step-scan photoacoustic FT-IR experiment. In this approach, the thermal wave propagating to the surface is represented as the integral of all heat wave vectors propagating across the sampling depth xn, and the spiral function K'beta(lambda)e(-beta)(lambda)xne(-x)n/mu(th)e(i)(omegat-(xn/mu(th))) represents the amplitude and phase of the heat wave vector propagating to the surface. The SSW approach can be applied to heterogeneous surfaces by representing thermal waves propagating to the surface as the sum of the thermal waves propagating through homogeneous layers that are integrals of all heat vectors from a given sampling depth. The proposed model is tested on multilayered polymeric surfaces and shows that the SSW approach allows semiquantitative surface imaging with the spatial resolution ranging from micrometer to 500 nm levels, and the spatial resolution is a function of the penetration depth.