Structure, governance and delivery of specialist training programs in periodontology and implant dentistry.

AIM: To update the competences and learning outcomes and their evaluation, educational methods and education quality assurance for the training of contemporary specialists in periodontology, including the impact of the 2018 Classification of Periodontal and Peri-implant Diseases and Conditions (2018 Classification hereafter) and the European Federation of Periodontology (EFP) Clinical Practice Guidelines (CPGs). METHODS: Evidence was gathered through scientific databases and by searching for European policies on higher education. In addition, two surveys were designed and sent to program directors and graduates. RESULTS: Program directors reported that curricula were periodically adapted to incorporate advances in diagnosis, classification, treatment guidelines and clinical techniques, including the 2018 Classification and the EFP CPGs. Graduates evaluated their overall training positively, although satisfaction was limited for training in mucogingival and surgical procedures related to dental implants. Traditional educational methods, such as didactic lectures, are still commonly employed, but they are now often associated with more interactive methods such as case-based seminars and problem-based and simulation-based learning. The evaluation of competences/learning outcomes should employ multiple methods of assessment. CONCLUSION: An update of competences and learning outcomes of specialist training in periodontology is proposed, including knowledge and practical application of the 2018 Classification and CPGs. Harmonizing specialist training in periodontology is a critical issue at the European level.

Evaluation of the extent of plaque removal and users' experience of alternative toothbrushes: A randomized single-blind crossover study.

INTRODUCTION: In residential care, tooth brushing with a manual toothbrush can be challenging because of technical difficulties, time consumption and poor patient cooperation, resulting in a sub-optimal cleaning. The study aimed at comparing the efficiency in plaque removal, brushing time and users' experience between three toothbrushes: a single-headed conventional manual toothbrush, a triple-headed manual toothbrush and a U-shaped electric toothbrush. METHODS: This was a single-blind crossover study with three pre-post-test conditions. Participants were 26 dental students divided into fixed pairs to play the role of caregivers and care receivers. Pre/post plaque scores were determined by two independent investigators according to the Quigley-Hein Plaque Index (QHI). Questionnaires evaluated participants' experiences. Statistical tests of significances of differences and ANOVA were performed. RESULTS: Results showed that plaque removal was more effective for the manual toothbrush and the triple-headed toothbrush compared to the U-shaped electric toothbrush (p < 0.001). Brushing time was the longest for the single manual toothbrush (149 s). The U-shaped electric toothbrush showed significantly better results for aspects related to comfort and salivation. The manual and triple-headed toothbrush showed better results for aspects related to cleanliness and motivation to use. CONCLUSION: Notwithstanding its favourable comfort, tooth plaque removal is not enhanced by a U-shaped electric toothbrush. The triple-headed and single-headed toothbrushes reduced plaque more substantially than the U-shaped toothbrush. In addition, the triple-headed manual toothbrush was not only effective in plaque removal, but also had a shorter brushing time and was easy to use, being an adequate alternative for care-dependent patient groups.

Effectiveness of a 3D simulation tool to teach the designing of metal removable partial dentures: A mixed-method study.

INTRODUCTION: Acquiring insights into the framework design of metal-based removable partial dentures (mRPD) is a current challenge in dental education. The aim of the present study was to explore the effectiveness of a novel 3D simulation tool to teach designing mRPD by investigating the learning gain and the acceptance and motivation towards the tool of dental students. MATERIALS AND METHODS: A 3D tool based on 74 clinical scenarios was developed for teaching the design of mRPD. Fifty-three third year dental students were randomly divided into two groups, with the experimental group (n = 26) having access to the tool during 1 week while the control group (n = 27) had no access. Quantitative analysis was based on a pre- and post-test in order to evaluate the learning gain, technology acceptance and motivation towards using the tool. Moreover, qualitative data was collected by means of an interview and focus group to get additional insights into the quantitative results. RESULTS: Although the results showed a higher learning gain for students in the experimental condition, the study did not find a significant difference between both conditions based on quantitative results. However, during the focus groups, all students of the experimental group revealed that the 3D tool improved their understanding of mRPD biomechanics. Moreover, survey results revealed that students positively evaluated the perceived usefulness and ease of use of the tool and indicated to have the intention to use the tool in the future. Suggestions were made for a redesign (e.g. creating scenarios themselves) and further implementation of the tool (e.g. analysing the scenarios in pairs or small groups). CONCLUSION: First results of the evaluation of the new 3D tool for teaching the design framework of mRPD are promising. Further research based on the design-based research methodology is needed to investigate the effects of the redesign on motivation and learning gain.

Effectiveness of implant-supported fixed partial denture in patients with history of periodontitis: A systematic review and meta-analysis.

AIM: This systematic review investigates the effectiveness of implant-supported fixed partial denture (IS-FPD) in patients with history of periodontitis (HP) vs. patients with no history of periodontitis (NHP). METHODS: A literature search was performed on different databases on May 2020. Prospective and retrospective studies assessing survival (primary outcome), success and biological/mechanical complications of IS-FPDs in HP vs. NHP patients at ≥1 year after implant loading were evaluated. Meta-analyses were conducted by estimating hazard ratio (HR), risk ratio (RR) and standardized mean differences (SMD) with 95% confidence intervals (CI) using random effect models. RESULTS: Of the initially identified 4096 articles, 349 underwent a full-text evaluation. Finally, 17 were included. Pooled data analyses showed that overall implant survival was significantly higher in the NHP than the HP group (HR = 2.06; 95% CI = 1.37-3.09; I2  = 0%). This difference was noted when follow-up ≥5 years. The risk of peri-implantitis was higher in HP than NHP patients (RR = 3.3; 95% CI = 1.31-8.3; I2  = 0%), whereas the mean marginal bone level change over time was not different between the groups (SMD = -0.16 mm; 95% CI = -1.04-0.73; I2  = 98%). CONCLUSIONS: In partially edentulous patients receiving IS-FPDs, a history of periodontitis is associated with poorer survival rate and higher risk of peri-implantitis during a 5-10 years period after implant loading.

Is the Jaw Bone Micro-Structure Altered in Response to Osteoporosis and Bisphosphonate Treatment? A Micro-CT Analysis.

The aim of the study was to quantify the micro-architectural changes of the jaw bone in response to ovariectomy, exposed or not to bisphosphonate treatment. A total of 47 Wistar rats were ovariectomized (OVX) or sham-operated (shOVX) and exposed to osteoporosis preventive treatment for eight weeks either with bisphosphonates (alendronate, ALN; group OVX-ALN) three days/week at a dose of 2 mg/kg or with saline solution (untreated control condition; group OVX). The bone morphometric parameters of the trabecular jaw bone were assessed using ex vivo micro-computed tomography. The regions of interest investigated in the maxilla were the inter-radicular septum of the second molar and the tuber. The regions quantified in the mandible included the three molar regions and the condyle. A one-way analysis of variance followed by pairwise comparison using Tukey's HSD and the Games-Howell test was conducted to explore significant differences between the groups. In the maxilla, OVX decreased the bone volume in the inter-radicular septum of the second molar. Bisphosphonate treatment was able to prevent this deterioration of the jaw bone. The other investigated maxillary regions were not affected by (un)treated ovariectomy. In the mandible, OVX had a significant negative impact on the jaw bone in the buccal region of the first molar and the inter-radicular region of the third molar. Treatment with ALN was able to prevent this jaw bone loss. At the condyle site, OVX significantly deteriorated the trabecular connectivity and shape, whereas preventive bisphosphonate treatment showed a positive effect on this trabecular bone region. No significant results between the groups were observed for the remaining regions of interest. In summary, our results showed that the effects of ovariectomy-induced osteoporosis are manifested at selected jaw bone regions and that bisphosphonate treatment is capable to prevent these oral bone changes.

Alteration of the Condylar Oral Bone in Obese and Gastric Bypass Mice.

Obesity is the main cause of type 2 diabetes mellitus (T2DM). Roux-en-Y gastric bypass (RYGB) surgery is an effective treatment for this obesity-related health problem. However, the adverse effects of T2DM on bone tissue persist or even aggravate after this surgical procedure. As studies on the mandibular condyle bone are scarce, the aim of the present study was to assess its compositional characteristics in T2DM and RYGB conditions. Thirty-two male C57BL/6 mice at 8 weeks of age were randomly assigned to receive either a high-fat or low-fat diet. After 14 weeks of high-fat diet intake, seven obese mice were subjected to RYGB surgery. All animals were euthanized at the age of 30 weeks. Mandibular bones were removed and the trabecular condyle region was assessed using Raman spectroscopy. A decreased mineralization was observed for both T2DM and RYGB condyle bones when compared to controls, with elevated carbonate substitutions for the RYGB group. No compositional differences in crystallinity and presence of advanced glycation end products were found between the groups, with the exception of an increased presence of N-carboxymethyl-lysine in RYGB bone compared to their T2DM counterpart. Site-specific measurements revealed a non-uniform bone composition, with increasing mineralization and carbonate substitutions towards the centre of the mandibular condyle. T2DM and RYGB surgery affect the mandibular condyle bone quality, as investigated at compositional level. Assessment of bone structural properties and remodelling should be carried out to further explore the effects of T2DM and RYGB surgery on this skeleton area.

A core curriculum in the biological and biomedical sciences for dentistry.

INTRODUCTION: The biomedical sciences (BMS) are a central part of the dental curriculum that underpins teaching and clinical practice in all areas of dentistry. Although some specialist groups have proposed curricula in their particular topic areas, there is currently no overarching view of what should be included in a BMS curriculum for undergraduate dental programmes. To address this, the Association for Dental Education in Europe (ADEE) convened a Special Interest Group (SIG) with representatives from across Europe to develop a consensus BMS curriculum for dental programmes. CURRICULUM: This paper summarises the outcome of the deliberations of this SIG and details a consensus view from the SIG of what a BMS curriculum should include. CONCLUSIONS: Given the broad nature of BMS applied to dentistry, this curriculum framework is advisory and seeks to provide programme planners with an indicative list of topics which can be mapped to specific learning objectives within their own curricula. As dentistry becomes increasingly specialised, these will change, or some elements of the undergraduate curriculum may move to the post-graduate setting. So, this document should be seen as a beginning and it will need regular review as BMS curricula in dentistry evolve.

Repurposing Toremifene for Treatment of Oral Bacterial Infections.

The spread of antibiotic resistance and the challenges associated with antiseptics such as chlorhexidine have necessitated a search for new antibacterial agents against oral bacterial pathogens. As a result of failing traditional approaches, drug repurposing has emerged as a novel paradigm to find new antibacterial agents. In this study, we examined the effects of the FDA-approved anticancer agent toremifene against the oral bacteria Porphyromonas gingivalis and Streptococcus mutans We found that the drug was able to inhibit the growth of both pathogens, as well as prevent biofilm formation, at concentrations ranging from 12.5 to 25 µM. Moreover, toremifene was shown to eradicate preformed biofilms at concentrations ranging from 25 to 50 µM. In addition, we found that toremifene prevents P. gingivalis and S. mutans biofilm formation on titanium surfaces. A time-kill study indicated that toremifene is bactericidal against S. mutans Macromolecular synthesis assays revealed that treatment with toremifene does not cause preferential inhibition of DNA, RNA, or protein synthesis pathways, indicating membrane-damaging activity. Biophysical studies using fluorescent probes and fluorescence microscopy further confirmed the membrane-damaging mode of action. Taken together, our results suggest that the anticancer agent toremifene is a suitable candidate for further investigation for the development of new treatment strategies for oral bacterial infections.

Titanium implant functionalization with phosphate-containing polymers may favour in vivo osseointegration.

AIM: Osseointegration of titanium implants is predictable, but can be improved via surface functionalization. MATERIALS AND METHODS: One hundred and twenty implants were installed in parietal bone of 12 domestic pigs and left to heal for 1 or 3 months. Five groups were defined according surface treatments: immersion in water (H2 O), 10% polyphosphoric acid (PPA10), 1% phosphorylated pullulan (PPL1), 10% phosphorylated pullulan (PPL10) or 10% phosphorylated pullulan + 1 µg bone morphogenetic protein-2 (PPL10 BMP). As primary outcome, implant osseointegration was evaluated by quantitative histology, namely peri-implant bone formation (B/T in %) and bone-to-implant contact (BIC in %) for each healing period. The Wilcoxon signed-rank test and Mann-Whitney U-test with α = 0.05 were performed. RESULTS: PPL10 and PPA10 groups showed significantly higher B/T and BIC results than the control (H2 O) group at 1-month (p < .05). No significant difference was found between PPL1 and H2 O or between PPL10 BMP and H2 O, irrespective of healing time (1 or 3 months) or investigated parameter (B/T and BIC; p > .05). After 3 months, no experimental group showed a significant difference compared to the control group (H2 O) for both investigated parameters (B/T and BIC; p > .05). CONCLUSION: Functionalizing titanium implants with inorganic or organic phosphate-containing polymers at 10 wt% concentration may stimulate peri-implant bone formation and implant osseointegration at early healing times.

The impact of autologous platelet concentrates on endodontic healing: a systematic review.

The current literature was reviewed to determine the impact of autologous platelet concentrates (APCs) on endodontic healing. All types of clinical study designs concerning any kind of endodontic treatment involving the application of APCs were included. Two independent reviewers searched three databases (PubMed, Embase, and Cochrane Library) for studies, complemented by hand search, until 16/1/2016. From the 423 identified records, 48 articles met the inclusion criteria. Selected randomized controlled clinical trials (RCTs) underwent Cochrane Collaboration's risk-of-bias assessment and data extraction. Only two RCTs showed low risk of bias. There was considerable heterogeneity between the RCTs with regard to the type of therapy, type of APCs, assessment method, and study quality, and therefore the data could not be analyzed quantitatively. The included case reports/series and non-randomized comparative studies underwent qualitative analysis with the revised Methodological Index for Non-Randomized Studies (MINORS) and data extraction. The two comparative non-randomized studies scored qualitatively high, though the MINORS-scores of the case series and reports were dispersed. APCs were involved in five endodontic treatment modalities, namely apexification, regenerative endodontic procedures, pulpotomy, apical surgery, and treatment of endo-perio/perio-endo lesions. APCs seem to accelerate postoperative bone healing, augment the patients' postoperative quality of life, aid further root development, and support maintenance/regaining of pulp vitality. No adverse events were reported. APCs in endodontic treatments seem to contribute to the healing of soft and hard tissues, though there is a lack of long-term high quality clinical trials and standardized treatment protocols.

Effect of insertion torque on titanium implant osseointegration: an animal experimental study.

OBJECTIVE: To evaluate the effect of implant insertion torque on the peri-implant bone healing and implant osseointegration. MATERIAL AND METHODS: Bilaterally in the tibia of five adult New Zealand white rabbits, 20 implants were installed, subdivided into four groups, corresponding to two insertion torque conditions (low, < 10 Ncm vs. high > 50 Ncm) and 2 experimental periods (2 weeks vs. 4 weeks of healing). The implant insertion torque was determined by the surgical drill diameter relative to the implant diameter. Implant osseointegration was evaluated by quantitative histology (bone-to-implant contact with host bone [BIC-host], with neoformed bone [BIC-de novo], with both bone types [BIC-total], and peri-implant bone [BA/TA]). Every response was modelled over time using GEE (general estimation equation) with an unstructured variance-covariance matrix to correct for dependency between the measurements from one animal. The statistical significance level of α = 0.05 was applied. RESULTS: Significantly, more BIC-host and BIC-total were recorded for H implants compared with L implants after 2 week of healing (P = 0.010 and P = 0.0001, respectively). However, this result was no longer found for the extended healing period. Furthermore, BIC-total significantly increased over time for L implants (P < 0.00001). In contrast, the significant increase in BA/TA over time was found for H implants (P < 0.01). Finally, H insertion torque led to an increased BA/TA after 4 week of healing (P < 0.02) compared with the L insertion protocol. CONCLUSION: L insertion torque implants installed in the rabbit tibial bone osseointegrate with considerable de novo bone formation. This bone neoformation enables L implants to catch up, already during the early osseointegration stage, the initial inferior amount BIC contact compared with that of H implants. A negative impact of the created strain environment accompanying H insertion torque implant installation on the biological process of osseointegration could not be observed, at least not at tissue level.

Evaluation of plaque removal by a single-headed versus a triple-headed manual toothbrush using different plaque assessment tools.

Background: Dental plaque is a common issue that can be effectively managed with proper oral hygiene practices and regular oral health care. The aim of this crossover study was to assess dental plaque using different methods (digital and clinical plaque scores) and evaluate the effectiveness of toothbrushing with a triple-headed manual toothbrush compared to a single-headed manual toothbrush in removing dental plaque. Methods: Plaque staining was performed to assess dental plaque amounts before and after brushing with the triple-headed (test) and single-headed (control) manual toothbrush in 21 study participants after plaque was allowed to accumulate for 48 hours. Dental plaque was scored both clinically as well as digitally. Results: Toothbrushing with a manual single-headed toothbrush and a triple-headed toothbrush was found to be equally effective when comparing plaque removal ability. Brushing time was shorter when using a triple-headed toothbrush, compared to a single-headed toothbrush. Conclusion: The triple-headed manual toothbrush may be a good alternative to the single-headed manual toothbrush for certain patient groups.

Contexte: La plaque dentaire est un problème courant qui peut être géré efficacement en adoptant de bonnes pratiques d'hygiène buccale et en obtenant régulièrement des soins buccodentaires. L'objectif de cette étude croisée était d'évaluer l'état de la plaque dentaire à l'aide de différentes méthodes (cotes de plaque numériques et cliniques) et d'évaluer l'efficacité du brossage à l'aide d'une brosse à dents manuelle à 3 côtés comparativement au brossage avec une brosse à dents manuelle à 1 côté pour éliminer la plaque dentaire. Méthodes: On a coloré la plaque dentaire pour en évaluer la quantité avant et après le brossage avec une brosse à dents manuelle à 3 côtés (essai) et à 1 côté (contrôle) parmi les 21 participants à l'étude après avoir laissé la plaque s'accumuler pendant 48 heures. On a attribué une cote clinique et numérique à la plaque dentaire. Résultats: Le brossage avec une brosse à dents manuelle à 3 côtés s'est révélé tout aussi efficace que le brossage avec une brosse manuelle à 1 côté sur le plan de l'élimination de la plaque. Le temps de brossage était plus court avec une brosse à dents à 3 côtés qu'avec une brosse à dents à 1 côté. Conclusion: Pour certains groupes de patients, la brosse à dents à 3 côtés peut être une bonne alternative à la brosse à dents ordinaire.

Bone tissue response to BMP-2 adsorbed on amorphous microporous silica implants.

AIM: To evaluate bone regeneration potential of bone morphogenetic protein-2 (BMP-2) adsorbed on amorphous microporous silica (AMS). MATERIALS & METHODS: Four implants [titanium as control (CTR); AMS-coated titanium (AMS), BMP-2 adsorbed on titanium (CTR+BMP) and AMS (AMS+BMP)] were implanted randomly in the tibiae of 20 New Zealand white rabbits. Bone specimens with implants were retrieved 2/4 weeks post implantation and analysed histologically and histomorphometrically. Bone fraction was measured in initial bone-free area (bone regeneration area, BRA) and in the area with initial bone-implant contact [bone adaptation area (BAA)] (BF(BRA) & BF(BAA) ). Bone-implant contact was measured in BRA (BIC(BRA) ). In vitro BMP-2 release profiles were determined to evaluate the impact of the carrier surface. Mixed models were used for statistical analysis. RESULTS: BMP-2 release profiles were different for CTR+BMP and AMS+BMP. BIC(BRA) and BF(BRA) were significantly increased after 4 weeks compared to 2 weeks for AMS, CTR+BMP and AMS+BMP. However, no differences between the implant types were observed within both healing periods. BF(BAA) for CTR+BMP was smaller than that for CTR and AMS+BMP after 4 weeks. Despite slower BMP-2 release, AMS+BMP did not stimulate bone regeneration. CTR+BMP caused bone resorption at the bone-implant interface. CONCLUSIONS: BMP-2 functionalized implant surfaces failed to stimulate bone regeneration and osseointegration.

Occlusal overload and bone/implant loss.

AIM: The aim of this search was to assess the biological consequences that overload might have on already osseointegrated oral implants through a systematic screening of the scientific literature. METHOD: Detailed searches through PUBMED, OVID, EMBASE and LILACS databases were made. Articles published up to December 2011 and those reported on the clinical, radiographic and/or histological outcome of oral implants subjected to so-called overload were considered eligible for inclusion. Identified studies were assessed by one non-blinded reviewer according to well-defined inclusion and exclusion criteria. When doubt arose, the co-authors were counselled until final agreement was obtained. The PICO questions formulated was:"what is the effect of overload vs. no overload on bone/implant loss in clinically stable implants?" RESULTS: The database searches as well as additional hand searching, resulted in 726 potentially relevant titles. Eventually, 16 clinical and 25 animal studies were considered relevant to the topic. After inclusion/exclusion criteria assessment, all clinical studies and all but three animal studies and one systematic review were considered at high risk of bias and excluded. The included animal studies did not reveal an association between overload and peri-implant bone loss in the absence of peri-implant inflammation, whereas in its presence, overload seemed to aggravate the peri-implant tissue breakdown. CONCLUSIONS: The effect of implant overload on bone/implant loss in clinically well-integrated implants is poorly reported and provides little unbiased evidence to support a cause-and-effect relationship. The PICO question remained unanswered. At the animal level, "overload", mimicked by supra-occlusal contacts acting in an uninflamed peri-implant environment, did not negatively affect osseointegration and even was anabolic. In contrast, supra-occlusal contacts in the presence of inflammation significantly increased the plaque-induced bone resorption.

Oral Implant Restorations By Undergraduate Students: An Up To 5-Years Clinical Outcome.

PURPOSE: To clinically evaluate oral implant restorations placed by undergraduate students in the dental clinical curriculum at KU Leuven (Belgium) in terms of function and esthetics. MATERIALS AND METHODS: A retrospective observational cohort study was designed. The esthetic and functional evaluations of implant-supported restorations placed in the framework of the undergraduate implant dentistry clinical training program using White/Pink Esthetic Score (WES/PES) and visual analog scale (VAS) scoring was performed. Furthermore, complications were registered based retrospectively on the patient's medical file. The following research questions were stipulated: (1) How well do implant-supported restorations placed by undergraduate students perform esthetically? and (2) Which complications occurred and how were these managed? RESULTS: Between August 2008 and July 2014 (6 academic terms), 251 implants (Brånemark System Mk III, Nobel Biocare) were placed in 113 patients by 155 students (> 40% of all students enrolled in the training program). Of these implants, 228 were restored in 101 patients by 118 students with varying restoration types. Esthetic scoring of the restorations in 83 of these patients revealed a satisfying mean WES of 8.14 ± 2.09 (out of 10) and PES of 9.56 ± 3.14 (out of 14). Complications were registered in 18.9% of the cases. DISCUSSION: Clinical training in implant dentistry for undergraduates contributes to the development of advanced skills in the dental student's Master education. Overall, patients were satisfied with their implant-supported restorations. Implant and restoration success rates and complication incidence were confirmed by long-term data in the oral implant literature.

Regenerative Endodontic Procedure of Immature Permanent Teeth with Leukocyte and Platelet-rich Fibrin: A Multicenter Controlled Clinical Trial.

INTRODUCTION: The aim of this nonrandomized, multicenter controlled clinical trial was to evaluate the impact of leukocyte-platelet-rich fibrin (LPRF) on regenerative endodontic procedures (REPs) of immature permanent teeth in terms of periapical bone healing (PBH) and further root development (RD). METHODS: Healthy patients between 6-25 years with an inflamed or necrotic immature permanent tooth were included and divided between the test (= REP + LPRF) and control (= REP-LPRF) group depending on their compliance and the clinical setting (university hospital or private practice). After receiving REP ± LPRF, the patients were recalled after 3, 6, 12, 24, and 36 months. At each recall session, the teeth were clinically and radiographically (by means of a periapical radiograph [PR]) evaluated. A cone-beam computed tomographic (CBCT) imaging was taken preoperatively and 2 and 3 years postoperatively. PBH and RD were quantitatively and qualitatively assessed. RESULTS: Twenty-nine teeth with a necrotic pulp were included, from which 23 (9 test and 14 control) were analyzed. Three teeth in the test group had a flare-up reaction in the first year after REP. Except for 2 no shows, all the analyzed teeth survived up to 3 years after REP, and, in case of failure, apexification preserved them. Complete PBH was obtained in 91.3% and 87% of the cases based on PR qualitative and quantitative evaluation, respectively, with no significant difference between the groups with respect to the baseline. The PR quantitative change in RD at the last recall session with respect to the baseline was not significant (all P values > .05) in both groups. The qualitative assessment of the type of REP root healing was nonuniform. In the test group, 55.6% of the teeth presented no RD and no apical closure. Only 50% of the 14 teeth assessed with CBCT imaging presented complete PBH. Regarding volumetric measurements on RD 3 years after REP for the change with respect to the baseline in root hard tissue volume, mean root hard tissue thickness, and apical area, the control group performed significantly in favor of RD than the test group (P = .03, .003, and 0.05 respectively). For the volumetric change 3 years after REP with respect to the baseline in root length and maximum root hard tissue thickness, no significant difference (P = .72 and .4, respectively) was found between the groups. The correlation between the PR and CBCT variables assessing RD was weak (root lengthening) to very weak (root thickening). CONCLUSIONS: REP-LPRF seems to be a viable treatment option to obtain PBH and aid further RD of necrotic immature permanent teeth. Caution is needed when evaluating REP with PR.

Implant functionalization with mesoporous silica: A promising antibacterial strategy, but does such an implant osseointegrate?

OBJECTIVES: New strategies for implant surface functionalization in the prevention of peri-implantitis while not compromising osseointegration are currently explored. The aim of this in vivo study was to assess the osseointegration of a titanium-silica composite implant, previously shown to enable controlled release of therapeutic concentrations of chlorhexidine, in the Göttingen mini-pig oral model. MATERIAL AND METHODS: Three implant groups were designed: macroporous titanium implants (Ti-Porous); macroporous titanium implants infiltrated with mesoporous silica (Ti-Porous + SiO2 ); and conventional titanium implants (Ti-control). Mandibular last premolar and first molar teeth were extracted bilaterally and implants were installed. After 1 month healing, the bone in contact with the implant and the bone regeneration in the peri-implant gap was evaluated histomorphometrically. RESULTS: Bone-to-implant contact and peri-implant bone volume for Ti-Porous versus Ti-Porous + SiO2 implants did not differ significantly, but were significantly higher in the Ti-Control group compared with Ti-Porous + SiO2 implants. Functionalization of titanium implants via infiltration of a SiO2 phase into the titanium macropores does not seem to inhibit implant osseointegration. Yet, the importance of the implant macro-design, in particular the screw thread design in a marginal gap implant surgery set-up, was emphasized by the outstanding results of the Ti-Control implant. CONCLUSIONS: Next-generation implants made of macroporous Ti infiltrated with mesoporous SiO2 do not seem to compromise the osseointegration process. Such implant functionalization may be promising for the prevention and treatment of peri-implantitis given the evidenced potential of mesoporous SiO2 for controlled drug release.

Histological, histomorphometrical, and radiological evaluation of an experimental implant design with a high insertion torque.

OBJECTIVES: The aim of this study was to compare bone behaviour around an experimental implant design with a high insertion torque with the Astra-Tech implant (control). MATERIALS AND METHODS: In ten 18-month-old male minipigs, the last premolars and first molars were extracted to provide space for two implants in each quadrant. A first set of 40 implants were placed 3 months after the extraction and 40 additional implants were installed another 2 months later. The animals were sacrificed 3 months after the first implant installation so that half of the implants had healed for 1 month and the other half for 3 months. Radiological evaluation was performed at baseline, 1 month, 2 months, and 3 months after implant installation. Bone defect depth and area, bone level changes, bone-to-implant contact density, and peri-implant bone fraction were measured histomorphometrically. RESULTS: Radiological analyses revealed a significantly higher bone loss around the experimental implants. Histomorphometric analyses confirmed significantly more bone loss, larger marginal bone defects, and a lower overall peri-implant bone fraction around the experimental implants. CONCLUSION: The experimental implant design caused significantly more peri-implant bone loss compared with the control implant. As strain gauge measurements indicate excessive marginal strains around the experimental implants, osseocompression might have played a role in the observed marginal bone loss.

Effect of implant surface roughness and loading on peri-implant bone formation.

BACKGROUND: Critical factors for the establishment of osseointegration are the implant surface microtopography and the local mechanical environment. The present study evaluated the bone response around a turned (T) and a roughened (R) implant for either an unloaded or a well-controlled loaded situation. METHODS: Bone chambers were installed in the tibia of 20 rabbits. In each of the chambers, two identical displacement-controlled loading experiments were performed: 30 microm for 400 cycles at 1 Hz, three times a week for 9 weeks versus 0-microm implant displacement. A linear mixed model and a logistic mixed model with alpha = 5% were set to study the significant effect of the surface texture on the peri-implant bone response in the unloaded (T-0 microm versus R-0 microm) and the loaded (T-30 microm versus R-30 microm) mode. RESULTS: Results indicated no microtopographic dependence of the bone response further away from the implant in unloaded and loaded conditions. For a load-free implant, osseointegration seemed to occur with a higher incidence at a roughened compared to a turned implant surface. In the presence of loading, the topographic dependency of the osteogenic activity at the interface was overruled by the loading-related bone response, revealing no significant differences in osseointegration incidence between T and R. CONCLUSION: A predominant effect of the interfacial mechanical environment over the implant surface characteristics on the differentiating cell population is suggested.

Effect of high-frequency loading and parathyroid hormone administration on peri-implant bone healing and osseointegration.

The objective of this study is to examine the effect of low-magnitude, high-frequency (LMHF) loading, and anti-osteoporosis medications such as parathyroid hormone (PTH) and bisphosphonates on peri-implant bone healing in an osteoporosis model, and to assess their combined effects on these processes. Thirteen-week-old ovariectomized rats (n = 44) were divided into three groups: PTH, alendronate, and saline. After 3 weeks of drug administration, titanium implants were inserted into the tibiae. Each group was subdivided into two groups: with or without LMHF loading via whole-body vibration (50 Hz at 0.5 g, 15 min per day, 5 days per week). Rats were killed 4 weeks following implantation. Removal torque test, micro-CT analyses (relative gray (RG) value, water = 0, and implant = 100), and histomorphometric analyses (bone-to-implant contact (BIC) and peri-implant bone formation (bone volume/tissue volume (BV/TV))) were performed. Removal torque values and BIC were significantly differed by loading and drug administration (ANOVA). Post hoc analysis showed that PTH-treated groups were significantly higher than the other drug-treated groups. BV/TV was significantly enhanced by PTH administration. In cortical bone, RG values were significantly increased by loading. In trabecular bone, however, RG values were significantly increased by PTH administration. These findings suggest that LMHF loading and PTH can act locally and additively on the bone healing process, improving the condition of implant osseointegration.