Chewing efficiency and occlusal functional morphology in modern humans.

The reduction of occlusal dimensions in early Homo is often proposed to be a functional adaptation to diet. With their smaller occlusal surfaces, species of early Homo are suggested to have reduced food-processing abilities, particularly for foods with high material properties (e.g., increased toughness). Here, we employ chewing efficiency as a measure of masticatory performance to test the relationships between masticatory function and food properties. We predicted that humans are more efficient when processing foods of lower toughness and Young's modulus values, and that subjects with larger occlusal surfaces will be less efficient when processing foods with higher toughness and Young's modulus, as the greater area spreads out the overall bite force applied to food particles. Chewing efficiency was measured in 26 adults using high-speed motion capture and surface electromyography. The dentition of each subject was cast and the occlusal surface was quantified using dental topographic analysis. Toughness and displacement-limited index were negatively correlated with chewing efficiency, but Young's modulus was not. Increased occlusal two-dimensional area and surface area were positively correlated with chewing efficiency for all foods. Thus, larger occlusal surface areas were more efficient when processing foods of greater toughness. These results suggest that the reduction in occlusal area in early Homo was associated with a reduction in chewing efficiency, particularly for foods with greater toughness. Further, the larger occlusal surfaces of earlier hominins such as Australopithecus would have likely increased chewing efficiency and increased the probability of fracture when processing tough foods.

Primate dietary ecology in the context of food mechanical properties.

Substantial variation exists in the mechanical properties of foods consumed by primate species. This variation is known to influence food selection and ingestion among non-human primates, yet no large-scale comparative study has examined the relationships between food mechanical properties and feeding strategies. Here, we present comparative data on the Young's modulus and fracture toughness of natural foods in the diets of 31 primate species. We use these data to examine the relationships between food mechanical properties and dietary quality, body mass, and feeding time. We also examine the relationship between food mechanical properties and categorical concepts of diet that are often used to infer food mechanical properties. We found that traditional dietary categories, such as folivory and frugivory, did not faithfully track food mechanical properties. Additionally, our estimate of dietary quality was not significantly correlated with either toughness or Young's modulus. We found a complex relationship among food mechanical properties, body mass, and feeding time, with a potential interaction between median toughness and body mass. The relationship between mean toughness and feeding time is straightforward: feeding time increases as toughness increases. However, when considering median toughness, the relationship with feeding time may depend upon body mass, such that smaller primates increase their feeding time in response to an increase in median dietary toughness, whereas larger primates may feed for shorter periods of time as toughness increases. Our results emphasize the need for additional studies quantifying the mechanical and chemical properties of primate diets so that they may be meaningfully compared to research on feeding behavior and jaw morphology.

Food mechanical properties, feeding ecology, and the mandibular morphology of wild orangutans.

Bornean orangutan mandibular morphology has been functionally linked to the exploitation of hard and tough foods, based on evidence that Pongo pygmaeus wurmbii spends a greater percentage of time feeding on bark, seeds and vegetation compared with Pongo abelii (Sumatran orangutans) and the assumption that these tissues are more challenging to process than fruit pulp. We measured and compared toughness (R) and Young's modulus (E) of ripe and unripe foods exploited by P. abelii and P. p. wurmbii. Additionally, we recorded and compared the percentage of time these orangutans fed on plants/plant parts of varying degrees of R and E. Compared with P. abelii, P. p. wurmbii consumed significantly tougher and more displacement limited (R/E)(0.5) fruit parts, leaves and inner bark, and spent a significantly greater percentage of time feeding on immature leaves, unripe fruit and other vegetation. Modulus did not vary as expected between species, likely because we failed to capture the high-end range of modulus values for tissues consumed by P. p. wurmbii. Notably, P. p. wurmbii spent ∼40% of its feeding time on the toughest foods consumed (between 1000 and 4000 J m(-2)). Thus, the hypothesis that mandibular robusticity in P. p. wurmbii is functionally linked to feeding on tough foods is supported and is likely related to countering relatively larger external forces and/or repetitive loads required to process the toughest tissues. The importance of elastic modulus on morphological divergence awaits future studies capturing the full range of this material property for P. p. wurmbii. Finally, phenophase and fruit availability influence orangutan species differences in food material properties and percentage of time spent feeding on various foods, emphasizing the importance of incorporating these variables in future studies of feeding ecology and craniodental morphology in extant taxa.

Foraging and ranging behavior during a fallback episode: Hylobates albibarbis and Pongo pygmaeus wurmbii compared.

Periodic episodes of food scarcity may highlight the adaptive value of certain anatomical traits, particularly those that facilitate the acquisition and digestion of exigent fallback foods. To better understand the selective pressures that favored the distinctive dental and locomotor morphologies of gibbons and orangutans, we examined the foraging and ranging behavior of sympatric Hylobates albibarbis and Pongo pygmaeus wurmbii during an episode of low fruit availability at Tuanan, Kalimantan Tengah, Indonesia. We found that Hylobates ranged 0.5 km day(-1) or 33% farther than did Pongo, but the overall daily ranging of both species did not vary as fruit availability decreased by as much as 50%. Among gibbons, we observed dietary switching to fallback foods; in particular, there was a progressively greater reliance on figs, liana products, and unripe fruit. Orangutans relied heavily on unripe fruit and fracture-resistant bark and pith tissues. Despite these divergent fallback patterns, the stiffness of fruit mesocarp consumed by Hylobates and Pongo did not differ. We discuss canine and molar functional morphology with respect to dietary mechanics. Next, to contextualize these results, we discuss our findings with respect to forest structure. The rain forests of Southeast Asia have been described as having open, discontinuous canopies. Such a structure may inform our understanding of the ranging behavior and distinctive locomotion of apes in the region, namely richochetal brachiation and quadrumanous clambering. Our approach of integrating behavioral ecology with physical measures of food may be a powerful tool for understanding the functional adaptations of primates.

Trabecular Anisotropy in the Primate Mandibular Condyle Is Associated with Dietary Toughness.

Past attempts to establish a relationship between mandibular morphology and different dietary categories (e.g., frugivore, folivore, insectivore) have had mixed results, possibly because descriptive dietary categories are too broad and obscure variation within primate diets. Another potential reason is that not all aspects of skeletal architecture, especially trabecular anisotropy, have factored into functional assessments of dietary inputs into jaw form. Recent emphasis on quantifying food mechanical properties (FMPs) has provided an alternative to reliance on dietary categories. We used data on FMPs to test for correlations among dietary toughness and Young's modulus and the trabecular structure of the mandibular condyle, which is loaded during feeding and should reflect differences in masticatory stresses associated with different dietary FMPs. Adult primate mandibles from 11 species were imaged using high-resolution X-ray computed tomography, and trabecular structure was analyzed with BoneJ and Quant3D to assess common three-dimensional trabecular parameters. Results of phylogenetic generalized least squares analysis suggested a positive correlation between the degree of anisotropy (DA) and toughness, and weaker correlations between FMPs and various other trabecular variables. Because the DA contributes to the mechanical properties of bone, these results suggest a functional relationship between dietary toughness and trabecular anisotropy in the mandibular condyle. Such a perspective underscores the need to consider all aspects of skeletal morphology in evaluating the links between diet and jaw biomechanics. Anat Rec, 2018. © 2018 Wiley Periodicals, Inc.

Cyclical nursing patterns in wild orangutans.

Nursing behavior is notoriously difficult to study in arboreal primates, particularly when offspring suckle inconspicuously in nests. Orangutans have the most prolonged nursing period of any mammal, with the cessation of suckling (weaning) estimated to occur at 6 to 8 years of age in the wild. Milk consumption is hypothesized to be relatively constant over this period, but direct evidence is limited. We previously demonstrated that trace element analysis of bioavailable elements from milk, such as barium, provides accurate estimates of early-life diet transitions and developmental stress when coupled with growth lines in the teeth of humans and nonhuman primates. We provide the first detailed nursing histories of wild, unprovisioned orangutans (Pongo abelii and Pongo pygmaeus) using chemical and histological analyses. Laser ablation inductively coupled plasma mass spectrometry was used to determine barium distributions across the teeth of four wild-shot individuals aged from postnatal biological rhythms. Barium levels rose during the first year of life in all individuals and began to decline shortly after, consistent with behavioral observations of intensive nursing followed by solid food supplementation. Subsequent barium levels show large sustained fluctuations on an approximately annual basis. These patterns appear to be due to cycles of varying milk consumption, continuing until death in an 8.8-year-old Sumatran individual. A female Bornean orangutan ceased suckling at 8.1 years of age. These individuals exceed the maximum weaning age reported for any nonhuman primate. Orangutan nursing may reflect cycles of infant demand that relate to fluctuating resource availability.

Food material properties and mandibular load resistance abilities in large-bodied hominoids.

Numerous comparative studies have sought to demonstrate a functional link between feeding behavior, diet, and mandibular form in primates. In lieu of data on the material properties of foods ingested and masticated, many investigators have relied on qualitative dietary classifications such as "folivore" or "frugivore." Here we provide the first analysis of the relationship between jaw form, dietary profiles, and food material properties in large-bodied hominoids. We employed ratios of area moments of inertia and condylar area to estimate moments imposed on the mandible in order to evaluate and compare the relative ability to counter mandibular loads among central Bornean orangutans (Pongo pygmaeus wurmbii), Virunga mountain gorillas (Gorilla beringei beringei), and east African chimpanzees (Pan troglodytes schweinfurthii). We used data on elastic modulus (E) of fruit, fracture toughness (R) of fruit, leaves, and non-fruit, non-leaf vegetation, and derived fragmentation indices ( R/E and ER), as proxies for bite force. We generated bending and twisting moments (forcexmoment arm) for various mandibular loading behaviors using food material properties to estimate minimally required bite forces. Based on E and R of foods ingested and masticated, we hypothesized improved resistance to mandibular loads in Pongo p. wurmbii compared to the African apes, and in G. b. beringei compared to Pan t. schweinfurthii. Results reveal that our predictions are borne out only when bite forces are estimated from maximum R of non-fruit, non-leaf vegetation. For all other tissues and material properties results were contrary to our predictions. Importantly, as food material properties change, the moments imposed on the mandible change; this, in turn, alters the entire ratio of relative load resistance to moment. The net effect is that species appear over- or under-designed for the moments imposed on the mandible. Our hypothesis, therefore, is supported only if we accept that maximum R of these vegetative tissues represents the relevant mechanical property influencing the magnitude of neuromuscular activity, food fragmentation, and mandibular morphology. A general implication is that reliable estimates of average and maximum bite forces from food material properties require that the full range of tissues masticated be tested. Synthesizing data on ingestive and masticatory behaviors, the number of chewing cycles associated with a given food, and food mechanical properties, should inform the broader question of which foods and feeding behaviors are most influential on the mandibular loading environment.

Functional ecology and evolution of hominoid molar enamel thickness: Pan troglodytes schweinfurthii and Pongo pygmaeus wurmbii.

The divergent molar characteristics of Pan troglodytes and Pongo pygmaeus provide an instructive paradigm for examining the adaptive form-function relationship between molar enamel thickness and food hardness. Although both species exhibit a categorical preference for ripe fruit over other food objects, the thick enamel and crenulated occlusal surface of Pongo molar teeth predict a diet that is more resistant to deformation (hard) and fracture (tough) than the diet of Pan. We confirm these predictions with behavioral observations of Pan troglodytes schweinfurthii and Pongo pygmaeus wurmbii in the wild and describe the mechanical properties of foods utilized during periods when preferred foods are scarce. Such fallback foods may have exerted a selective pressure on tooth evolution, particularly molar enamel thinness, which is interpreted as a functional adaptation to seasonal folivory and a derived character trait within the hominoid clade. The thick enamel and crenulated occlusal surface of Pongo molars is interpreted as a functional adaptation to the routine consumption of relatively tough and hard foods. We discuss the implications of these interpretations for inferring the diet of hominin species, which possessed varying degrees of thick molar enamel. These data, which are among the first reported for hominoid primates, fill an important empirical void for evaluating the mechanical plausibility of putative hominin food objects.