Inhalable Polymeric Microparticles for Phage and Photothermal Synergistic Therapy of Methicillin-Resistant Staphylococcus aureus Pneumonia.

Acute methicillin-resistant Staphylococcus aureus (MRSA) pneumonia is a common and serious lung infection with high morbidity and mortality rates. Due to the increasing antibiotic resistance, toxicity, and pathogenicity of MRSA, there is an urgent need to explore effective antibacterial strategies. In this study, we developed a dry powder inhalable formulation which is composed of porous microspheres prepared from poly(lactic-co-glycolic acid) (PLGA), internally loaded with indocyanine green (ICG)-modified, heat-resistant phages that we screened for their high efficacy against MRSA. This formulation can deliver therapeutic doses of ICG-modified active phages to the deep lung tissue infection sites, avoiding rapid clearance by alveolar macrophages. Combined with the synergistic treatment of phage therapy and photothermal therapy, the formulation demonstrates potent bactericidal effects in acute MRSA pneumonia. With its long-term stability at room temperature and inhalable characteristics, this formulation has the potential to be a promising drug for the clinical treatment of MRSA pneumonia.

Biomimetic Self-Maturation Mineralization System for Enamel Repair.

Enamel repair is crucial for restoring tooth function and halting dental caries. However, contemporary research often overlooks the retention of organic residues within the repair layer, which hinders the growth of dense crystals and compromises the properties of the repaired enamel. During the maturation of natural enamel, the organic matrix undergoes enzymatic processing to facilitate further crystal growth, resulting in a highly mineralized tissue. Inspired by this process, a biomimetic self-maturation mineralization system is developed, comprising ribonucleic acid-stabilized amorphous calcium phosphate (RNA-ACP) and ribonuclease (RNase). The RNA-ACP induces initial mineralization in the form of epitaxial crystal growth, while the RNase present in saliva automatically triggers a biomimetic self-maturation process. The mechanistic study further indicates that RNA degradation prompts conformational rearrangement of the RNA-ACP, effectively excluding the organic matter introduced earlier. This exclusion process promotes lateral crystal growth, resulting in the generation of denser enamel-like apatite crystals that are devoid of organic residues. This strategy of eliminating organic residues from enamel crystals enhances the mechanical and physiochemical properties of the repaired enamel. The present study introduces a conceptual biomimetic mineralization strategy for effective enamel repair in clinical practice and offers potential insights into the mechanisms of biomineral formation.

Bacteria-mediated resistance of neutrophil extracellular traps to enzymatic degradation drives the formation of dental calculi.

Dental calculi can cause gingival bleeding and periodontitis, yet the mechanism underlying the formation of such mineral build-ups, and in particular the role of the local microenvironment, are unclear. Here we show that the formation of dental calculi involves bacteria in local mature biofilms converting the DNA in neutrophil extracellular traps (NETs) from being degradable by the enzyme DNase I to being degradation resistant, promoting the nucleation and growth of apatite. DNase I inhibited NET-induced mineralization in vitro and ex vivo, yet plasma DNases were ineffective at inhibiting ectopic mineralization in the oral cavity in rodents. The topical application of the DNA-intercalating agent chloroquine in rodents fed with a dental calculogenic diet reverted NET DNA to its degradable form, inhibiting the formation of calculi. Our findings may motivate therapeutic strategies for the reduction of the prevalence of the deposition of bacteria-driven calculi in the oral cavity.

Manifestation and Mechanisms of Abnormal Mineralization in Teeth.

Tooth biomineralization is a dynamic and complicated process influenced by local and systemic factors. Abnormal mineralization in teeth occurs when factors related to physiologic mineralization are altered during tooth formation and after tooth maturation, resulting in microscopic and macroscopic manifestations. The present Review provides timely information on the mechanisms and structural alterations of different forms of pathological tooth mineralization. A comprehensive study of these alterations benefits diagnosis and biomimetic treatment of abnormal mineralization in patients.

Association of Tooth Loss and Diet Quality with Acceleration of Aging: Evidence from NHANES.

BACKGROUND: Although tooth loss is widely recognized as a typical sign of aging, whether it is associated with accelerated aging, and to what extent diet quality mediates this association are unknown. METHODS: Data were collected from the National Health and Nutrition Examination Survey. The missing tooth counts were recorded as the number of edentulous sites. Phenotypic accelerated aging was calculated using 9 routine clinical chemistry biomarkers and chronological age. Healthy Eating Index 2015 (HEI-2015) score was used to evaluate diet quality. Multivariate logistic regression and linear regression were used to analyze the association between tooth loss and accelerated aging. Mediation analyses were used to examine the mediation role of diet quality in the association. RESULTS: The association between tooth loss and accelerated aging was confirmed. The highest quartile of tooth loss showed a positive association with accelerated aging (ß=1.090; 95% confidence interval, 0.555 to 1.625; P < .001). Diet quality decreased with increase number of missing teeth and showed a negative association with accelerated aging. Mediation analysis suggested that the HEI-2015 score partially mediated the association between tooth loss and accelerated aging (proportion of mediation: 5.302%; 95% confidence interval, 3.422% to 7.182%; P < .001). Plant foods such as fruits and vegetables were considered the key mediating food. CONCLUSIONS: The association between tooth loss and accelerated aging, as well as the partially mediating role of dietary quality in this association was confirmed. These findings suggested that more attention should be paid to the population with severe tooth loss and the changes of their dietary quality.

Single-cell RNA sequencing in oral science: Current awareness and perspectives.

The emergence of single-cell RNA sequencing enables simultaneous sequencing of thousands of cells, making the analysis of cell population heterogeneity more efficient. In recent years, single-cell RNA sequencing has been used in the investigation of heterogeneous cell populations, cellular developmental trajectories, stochastic gene transcriptional kinetics, and gene regulatory networks, providing strong support in life science research. However, the application of single-cell RNA sequencing in the field of oral science has not been reviewed comprehensively yet. Therefore, this paper reviews the development and application of single-cell RNA sequencing in oral science, including fields of tissue development, teeth and jaws diseases, maxillofacial tumors, infections, etc., providing reference and prospects for using single-cell RNA sequencing in studying the oral diseases, tissue development, and regeneration.

Regulation of biomineralization by proteoglycans: From mechanisms to application.

Proteoglycans consist of core proteins and one or more covalently-linked glycosaminoglycan chains. They are structurally complex and heterogeneous. Proteoglycans bind to cell surface receptors, cytokines, growth factors and have strong affinity for collagen fibrils. Together with their complex spatial structures and different charge densities, proteoglycans are directly or indirectly involved in biomineralization. The present review focused on the potential mechanisms of proteoglycans-mediated biomineralization. Topics covered include the ability of proteoglycans to influence the proliferation and differentiation of odontoblasts and osteoblasts through complex signaling pathways, as well as regulate the aggregation of collagen fibrils and mineral deposition. The functions of proteoglycans in mineralization regulation and biomimetic properties render them important components in bone tissue engineering. Hence, the integrated impact of proteoglycans on bone formation was also succinctly deliberated. The potential of proteoglycans to function therapeutic targets for relieving the symptoms of ectopic mineralization and mineralization defects was also comprehensively addressed.

Involvement of prenucleation clusters in calcium phosphate mineralization of collagen.

Involvement of thermodynamically-stable prenucleation clusters (PNCs) in the biomineralization of collagen has been speculated since their existence was reported in mineralization systems. It has been hypothesized that intrafibrillar mineralization proceeds via nucleation of inhibitor-stabilized intermediates produced by liquid-liquid separation (aka. polymer-induced liquid precursors; PILPs). Here, the contribution of PNCs and PILPs to calcium phosphate intrafibrillar mineralization of collagen was examined in a model with a semipermeable membrane that excludes nucleation inhibitor-stabilized PILPs from reaching the collagen fibrils, using cryogenic electron microscopy of reconstituted fibrils and conventional transmission electron microscopy of collagen sponges. Molecular dynamics simulation with the Interface force field (IFF) was used to confirm the existence of PILPs with amorphous calcium phosphate and elucidate details of the dynamics. Furthermore, intrafibrillar mineralization of single collagen fibrils was experimentally observed with unstabilized PNCs when anionic/cationic polyelectrolytes were used to establish Donnan equilibrium across the semipermeable membrane. Molecular dynamics simulation verified PNC formation within the collagen intrafibrillar gap zones at the atomic scale and explained the role of external PILPs. The PILPs decrease the interfibrillar water content and increase the interfibrillar ionic concentration. Nevertheless, intrafibrillar mineralization of collagen sponges with PNCs alone was inefficacious, being constrained by competition from extrafibrillar mineral precipitation. STATEMENT OF SIGNIFICANCE: Compared with conventional PILP-based intrafibrillar mineralization, mineralization of collagen fibrils using unstabilized PNCs is constrained by competition from extrafibrillar mineral deposition. The narrow window of opportunity for PNCs to produce intrafibrillar mineralization provides a plausible explanation for the feasibility of nucleation inhibitor-free intrafibrillar apatite assembly during reconstitution of type I collagen.

Static and dynamic evaluations of the wettability of commercial vinyl polysiloxane impression materials for artificial saliva.

This study evaluated the wettability of commercial vinyl polysiloxane impression materials by measuring contact angles on horizontal and non-horizontal surfaces using artificial saliva. Three light bodies (Affinis [Affi], Silagum [Sila] and Variotime [Vario-LB]) and one extra light body (Viriotime [Vario-ELB]) were prepared with flat surfaces. Static and dynamic contact angles were measured using the sessile drop method as a function of time. Contact angle hysteresis was the value of advancing contact angle minus receding contact angle. The results indicated that all materials were classified as hydrophilic materials. Vario-ELB and Affi showed better initial wettability than the other two materials. Vario-ELB showed more hydrophilic properties and was more vulnerable to changes in the intraoral environment compared to Affi, Sila and Vario-LB. These results suggest that measuring the time-dependent dynamic contact angle on the inclined surface can provide effective information regarding the wettability of impression materials to evaluate their clinical performance.

Tissue inhibitors of metalloproteinases-1 (TIMP-1) and -2(TIMP-2) are major serum factors that stimulate the TIMP-1 gene in human gingival fibroblasts.

We demonstrate in this study that both TIMP-1 and TIMP-2 are major serum factors that stimulate the induction of TIMP-1 mRNA in quiescent human gingival fibroblasts (Gin-1 cells) at mid-G1 (6-9 h after serum stimulation) of the cell cycle, but not that of TIMP-2. When we chased the secretion of both TIMP proteins into culture medium containing 10% FCS freed of both TIMPs, TIMP-2 secretion rose to the level in 10% FCS after 24 h, but TIMP-1 secretion remained at a fairly low level even after 3 days, thus reflecting a contrastive difference in the induction of both TIMP mRNAs. The stimulating activity of TIMP-1 on the expression of the TIMP-1 gene switched over to inhibitory activity, when the TIMP-1 concentration in the culture medium exceeded about 30 ng/ml. The depletion of TIMP-1 and TIMP-2 from FCS affected remarkably the induction of c-jun and c-fos mRNAs, but not that of c-ets-1 mRNA. TIMP-1 and TIMP-2-dependent expression of AP-1 protein was further demonstrated by using nuclear extracts of Gin-1 cells in an electrophoretic mobility shift assay.

Feasibility and simulation model of a pilot scale membrane bioreactor for wastewater treatment and reuse from Chinese traditional medicine.

The lack and pollution of water resource make wastewater reuse necessary. The pilot scale long-term tests for submerged membrane bioreactor were conducted to treat the effluents of anaerobic or aerobic treatment process for the high-strength Chinese traditional medicine wastewater. This article was focused on the feasibility of the wastewater treatment and reuse at shorter hydraulic retention time (HRT) of 5.0, 3.2 and 2.13 h. MLSS growth, membrane flux, vacuum values and chemical cleaning periods were also investigated. The experimental results of treating two-phase anaerobic treatment effluent demonstrated that the CODfilt was less than 100 mg/L when the influent COD was between 500-10000 mg/L at HRT of 5.0 h, which could satisfy the normal discharged standard in China. The experimental results to treat cross flow aerobic reactor effluent demonstrated that the average value of CODfilt was 17.28 mg/L when the average value of influent COD was 192.84 mg/L at HRT of 2.13 h during 106 d, which could completely meet the normal standard for water reuse. The maximum MLSS and MLVSS reached 24000 and 14500 mg/L at HRT of 3.2 h respectively. Membrane flux had maximal resume degrees of 94.7% at vacuum value of 0.02 MPa after cleaning. Chemical cleaning periods of membrane module were 150 d. A simulation model of operational parameters was also established based on the theory of back propagation neural network and linear regression of traditional mathematical model. The simulation model showed that the optimum operational parameters were suggested as follows: HRT was 5.0 h, SRT was 100 d, the range of COD loading rate was between 10.664-20.451 kg/(m3xd), the range of MLSS was between 7543-13694 mg/L.

Biological phosphorus removal in an extended ASM2 model: Roles of extracellular polymeric substances and kinetic modeling.

This paper presents the results of an extended ASM2 model for the modeling and calibration of the role of extracellular polymeric substances (EPS) in phosphorus (P) removal in an anaerobic-aerobic process. In this extended ASM2 model, two new components, the bound EPS (XEPS) and the soluble EPS (SEPS), are introduced. Compared with the ASM2, 7.71, 8.53, and 9.28% decreases in polyphosphate (polyP) were observed in the extended ASM2 in three sequencing batch reactors feeding with different COD/P ratios, indicating that 7.71-9.28% of P in the liquid was adsorbed by EPS. Sensitive analysis indicated that, five parameters were the significant influential parameters and had been chosen for further model calibration by using the least square method to simulate by MATLAB. This extended ASM2 has been successfully established to simulate the output variables and provides a useful reference for the mathematic simulations of the role of EPS in biological phosphorus removal process.

Self-assembled dual-modality contrast agents for non-invasive stem cell tracking via near-infrared fluorescence and magnetic resonance imaging.

Stem cells hold great promise for treating various diseases. However, one of the main drawbacks of stem cell therapy is the lack of non-invasive image-tracking technologies. Although magnetic resonance imaging (MRI) and near-infrared fluorescence (NIRF) imaging have been employed to analyse cellular and subcellular events via the assistance of contrast agents, the sensitivity and temporal resolution of MRI and the spatial resolution of NIRF are still shortcomings. In this study, superparamagnetic iron oxide nanocrystals and IR-780 dyes were co-encapsulated in stearic acid-modified polyethylenimine to form a dual-modality contrast agent with nano-size and positive charge. These resulting agents efficiently labelled stem cells and did not influence the cellular viability and differentiation. Moreover, the labelled cells showed the advantages of dual-modality imaging in vivo.

Iron oxide nanoparticles protected by NIR-active multidentate-polymers as multifunctional nanoprobes for NIRF/PA/MR trimodal imaging.

We designed and synthesized new kinds of near-infrared catechol-based multidentate polymers which were intended to yield compact NIR-active iron oxide nanoparticles with excellent stability and biocompatibility. The resulted multifunctional nanoprobes showed great potential as multimodal contrast agents for NIRF/PA/MR trimodal imaging in vivo.

A review on bioconversion of lignocellulosic biomass to H2: Key challenges and new insights.

With the increasing energy crisis and rising concern over climate change, the development of clean alternative energy sources is of great importance. Biohydrogen produced from lignocellulosic biomass is a promising candidate, because of its positives such as readily available, no harmful emissions, environment friendly, efficient, and renewable. However, obstacles still exist to enable the commercialization of biological hydrogen production from lignocellulosic biomass. Thus the objective of this work is to provide update information about the recent progress on lignocellulosic hydrogen conversion via dark fermentation. In this review, the most important technologies associated with lignocellulosic hydrogen fermentation were covered. Firstly, pretreatment methods for better utilization of lignocellulosic biomass are presented, at the same time, hydrolysis methods assisting to achieve efficient hydrogen fermentation were discussed. Afterwards, issues related to bioprocesses for hydrogen production purposes were presented. Additionally, the paper gave challenges and new insights of lignocellulosic biohydrogen production.

[Fracture resistance of the all-ceramic posts in post-and-core system].

OBJECTIVE: To make a comparative study on the fracture resistance of the all-ceramic posts in post-and-core system where the ceramic core was combined with the post by direct sintering and by two other methods. METHODS: A total of 15 all-ceramic posts fabricated by alumina-zirconia nano-composite infiltrated ceramics were randomly divided into three groups. They were given the following treatments: Group A: forming and combining the ceramic core with the post by direct sintering; group B: combining the ceramic core with the post by use of 3M RelyX for adhesion; group C: forming composite resin core onto the post. Each specimen was placed into a special jig and subjected to a load perpendicular to the post axis on INSTRON 4302 universal testing instrument until failure. ANOVA was used for statistical analysis. RESULTS: There was no statistically significant difference between the groups (P>0.05). CONCLUSION: The findings indicate that the strength of the post remains uninfluenced during the combination of the core with the post by direct sintering.

Separation and identification of oligomeric vinylmethoxysiloxanes by gradient elution chromatography coupled with electrospray ionization mass spectrometry.

A high-performance liquid chromatography with online electrospray ionization mass spectrometry (HPLC-ESI-MS) has been used to separate and identify the reaction products resulting from controlled acid-catalyzed hydrolytic polycondensation of vinyltrimethoxysilane (VMS). The reaction products were prepared in the molar ratio of water to VMS (r1) ranging from 0.6 to 1.2, characterized by standard spectroscopic techniques, and subsequently analyzed by HPLC-UV absorbance detection and HPLC-ESI-MS. Linear vinylmethoxysiloxane oligomers with the number of repeat units (n) ranging from 3 to 11 are predominant species at the beginning of the reaction (for r1=0.6). Then they transform into monocyclic (for r1=1.0) and bicyclic (for r1=1.2) species with gradually increasing amount of water in the reaction mixture. The oligomer conversions suggest that structure growth of vinylmetoxysiloxanes proceeds by nonrandom cyclization reactions, which are favored over chain extension under the chosen reaction conditions. Direct ESI-MS, HPLC-ESI-MS and HPLC-UV were used to determine the molar mass distributions for the vinylmethoxysiloxane oligomers prepared in three different values of r1. The molar mass averages increase slightly with the amount of water in the reaction mixture and vary somewhat with the method used. Our results indicate that with the combined capability of separation, sensitivity and identification, HPLC-ESI-MS is especially useful to study highly complex silicon-based compounds with hyperbranched, caged or cubic structures as building blocks for hybrid materials.

Separation and identification of oligomeric phenylethoxysiloxanols by liquid chromatography-electrospray ionization mass spectrometry.

Liquid chromatography-electrospray ionization mass spectrometry has been applied to qualitative analysis of oligomeric phenylethoxysiloxanols, a class of organosilanols as active intermediates to polyhedral silsesquioxanes. The phenylethoxysiloxanol samples were prepared by controlled acid-catalyzed hydrolysis and condensation of phenyltriethoxysilane at various molar equivalents of water (r1) and characterized by standard spectroscopic techniques. Using a gradient binary water-methanol mobile phase, these reaction products were resolved on octadecylsiloxane silica stationary phase and subsequently identified by online electrospray ionization mass spectrometric detection. Results show that the reaction products are composed of a multitude of linear and monocyclic siloxanol oligomers with various numbers of silicon atoms and hydroxyl groups, depending upon the reaction conditions used. With the r1 value increasing from 0.5 to 2.0, the chain lengths of the oligomers increase slightly but the numbers of hydroxyl groups increase considerably, accompanying by structural evolution from chains to rings. Characterization of the retention behavior of these oligomers indicates that hydrophobic interactions of phenyl and ethoxy groups with the stationary phase are responsible for their retention in reversed-phase liquid chromatography.

Self-assembled magnetic theranostic nanoparticles for highly sensitive MRI of minicircle DNA delivery.

As a versatile gene vector, minicircle DNA (mcDNA) has a great potential for gene therapy. However, some serious challenges remain, such as to effectively deliver mcDNA into targeted cells/tissues and to non-invasively monitor the delivery of the mcDNA. Superparamagnetic iron oxide (SPIO) nanoparticles have been extensively used for both drug/gene delivery and diagnosis. In this study, an MRI visible gene delivery system was developed with a core of SPIO nanocrystals and a shell of biodegradable stearic acid-modified low molecular weight polyethyleneimine (Stearic-LWPEI) via self-assembly. The Stearic-LWPEI-SPIO nanoparticles possess a controlled clustering structure, narrow size distribution and ultrasensitive imaging capacity. Furthermore, the nanoparticle can effectively bind with mcDNA and protect it from enzymatic degradation. In conclusion, the nanoparticle shows synergistic advantages in the effective transfection of mcDNA and non-invasive MRI of gene delivery.