Recent Progress in Two-Dimensional Antimicrobial Nanomaterials.

Nowadays, microorganisms, including bacteria and viruses, are regarded as new environmental pollutants and pose serious threats to public health. Yet, traditional disinfection approaches for bacteria and viruses are generally ineffective. Furthermore, they exhibit the disadvantages of high-energy consumption, environmental pollution, high cost, and toxic byproduct generation. In this respect, nanomaterials display promising antimicrobial capabilities due to their unique properties and provide solutions to the abovementioned issues. Herein, recent progress in the development of 2D nanomaterials displaying antimicrobial capabilities is highlighted. The structures, morphologies, and performances of essential metal, graphene, and nitride-based 2D antibacterial nanomaterials are summarized in detail. In addition, possible antimicrobial mechanisms and the relationship between structure and antimicrobial efficiency are elaborated.

Voltammetric determination of terbinafine in biological fluid at glassy carbon electrode modified by cysteic acid/carbon nanotubes composite film.

The electrochemical oxidation of L-cysteine (CySH) in presence of carbon nanotubes (CNTs) formed a composite film at a glassy carbon electrode (GCE) as a novel modifier for directly electroanalytical determination of terbinafine without sample pretreatment in biological fluid. The determination of terbinafine at the modified electrode with strongly accumulation was studied by differential pulse voltammetry (DPV). The peak current obtained at +1.156 V (vs. SCE) from DPV was linearly dependent on the terbinafine concentration in the range of 8.0 x 10(-8)-5.0 x 10(-5 )M in a B-R buffer solution (0.04 M, pH 1.81) with a correlation coefficient of 0.998. The detection limit (S/N=3) was 2.5 x 10(-8 )M. The low-cost modified electrode showed good sensitivity, selectivity, and stability. This developed method had been applied to the direct determination of terbinafine in human serum samples with satisfactory results. It is hopeful that the modified electrode will be applied for the medically clinical test and the pharmacokinetics in future.

Voltammetric determination of sinomenine in biological fluid using a glassy carbon electrode modified by a composite film of polycysteic acid and carbon nanotubes.

Polycysteic acid based electrochemical oxidation of L-cysteine (CySH) and carbon nanotubes (CNTs) formed a composite thin film material at a glassy carbon electrode (GCE) that was used a novel modifier for electroanalytical determination of sinomenine which is used for rheumatoid arthritis treatment. The determination of sinomenine at the composite modified electrode was studied by differential pulse voltammetry (DPV). The peak current obtained at + 0.632 V (vs SCE) from DPV was linearly dependent on the sinomenine concentration in the range of 1.0 x 10(-7) to 6.0 x 10(-5) M in a B-R buffer solution (0.04 M, pH 1.81) with a correlation coefficient of 0.998. The detection limit (S/N = 3) was 5.0 x 10(-8) M. The electrochemical reaction mechanism of sinomenine was also discussed. This new method was then applied to the high-throughput determination of sinomenine in human serum samples with satisfactory results. This polycysteic acid/CNTs composite film may be considered to be a promising, low-cost, durable, and biocompatible material for the modification of sensors in applications to pharmaceutical and biomedical analysis.

Construction of a non-enzymatic glucose sensor based on copolymer P4VP-co-PAN and Fe2O3 nanoparticles.

An electrochemical sensor based on a copolymer poly(4-vinylpyridine)-co-poly(acrylonitrile), P4VP-co-PAN, and Fe2O3 nanoparticle film modified glassy carbon electrode was developed for the determination of glucose. We studied the response of glucose with the proposed electrode, and determined the optimum conditions by changing the potential, pH and P4VP-co-PAN. The current response measurements were performed in PBS (c=0.1 M) with a potential of 0.7 V. The current response of this glucose sensor showed a linear relationship with the concentration in the range of 2.5 µM-0.58 mM (r=0.997). The experimental results demonstrate that this method has such merits as simple operation, low cost, high sensitivity, long term stability and good reproducibility, with satisfactory results.

Layer-by-layer assembly of polyelectrolyte and graphene oxide for open-tubular capillary electrochromatography.

In this paper, open-tubular capillary column coated with graphene oxide (GO) was prepared through ionic adsorption of negatively charged GO nanosheets onto the capillary wall pre-modified with positively charged poly(diallydimethylammonium chloride) (PDDA). Thus prepared coating was very stable and could endure over 200 separations. The electroosmotic flow (EOF) characteristics of bare fused silica capillary column, PDDA coated column, and GO-PDDA coated column (GO-PDDA@column) were investigated by varying the percentage of methanol in buffer and the buffer pH value. The run-to-run, day-to-day, and column-to-column reproducibilities of EOF on GO-PDDA@column were satisfying with relative standard deviation values of less than 2% in all cases. The stationary phase displays a characteristic reversed-phase behavior. The GO-PDDA@column was also used to separate proteins in egg white. Both basic and acidic proteins were separated in a single run.