Zwitterionic Cellulose Nanofibrils with High Salt Sensitivity and Tolerance.

To improve the salt tolerance/sensitivity of cellulose nanofibrils (CNFs), zwitterionic cellulose nanofibrils (ZCNFs) were prepared from softwood bleached kraft pulp fibers via a sequential process of anionic modification with 2,2,6,6-tetramethylepiperidin-1-oxyl (TEMPO)-mediated oxidation, cationic modification with (2,3-epoxypropyl) trimethylammonium chloride (EPTMAC), and high-pressure homogenization. To produce ZCNFs with different contents of cation group, EPTMAC loadings of 0.15 to 1.15 g/g fiber were explored during cationization. The obtained ZCNFs were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectra (XPS), thermogravimetric analysis (TGA), transmission electron microscopy (TEM), and rheological measurements. The salt tolerance of the ZCNFs was investigated by adding mixed salts into the ZCNF dispersions. The results demonstrated that the ZCNFs with both anionic and cationic charges were produced. Compared with the TEMPO-mediated oxidized cellulose nanofibrils (TOCNFs), the ZCNFs exhibited an excellent "salt-thickening" behavior under the studied salt concentrations (2-24% w/w). Moreover, increasing the content of the cation group increased the salt tolerance/sensitivity of ZCNFs. This work demonstrated that introducing cationic charges to the anionic charged TOCNFs imparts the produced ZCNFs with excellent salt sensitivity and tolerance, which could expand the application of nanocellulose in oil recovery or wastewater treatment.

Dual-cloud point extraction coupled to high performance liquid chromatography for simultaneous determination of trace sulfonamide antimicrobials in urine and water samples.

Dual-cloud point extraction (dCPE) was successfully developed for simultaneous extraction of trace sulfonamides (SAs) including sulfamerazine (SMZ), sulfadoxin (SDX), sulfathiazole (STZ) in urine and water samples. Several parameters affecting the extraction were optimized, such as sample pH, concentration of Triton X-114, extraction temperature and time, centrifugation rate and time, back-extraction solution pH, back-extraction temperature and time, back-extraction centrifugation rate and time. High performance liquid chromatography (HPLC) was applied for the SAs analysis. Under the optimum extraction and detection conditions, successful separation of the SAs was achieved within 9min, and excellent analytical performances were attained. Good linear relationships (R2≥0.9990) between peak area and concentration for SMZ and STZ were optimized from 0.02 to 10µg/mL, for SDX from 0.01 to 10µg/mL. Detection limits of 3.0-6.2ng/mL were achieved. Satisfactory recoveries ranging from 85 to 108% were determined with urine, lake and tap water spiked at 0.2, 0.5 and 1µg/mL, respectively, with relative standard deviations (RSDs, n=6) of 1.5-7.7%. This method was demonstrated to be convenient, rapid, cost-effective and environmentally benign, and could be used as an alternative tool to existing methods for analysing trace residues of SAs in urine and water samples.