AnCMBR-AFB-integrated process for the treatment of high nitrogen and phosphorus wastewater.

Improving the nitrogen and phosphorus removal rates and efficiently controlling membrane fouling are the keys to fully exploiting the applicability of anaerobic membrane bioreactor (AnMBR) process in high-concentration wastewater treatment. To that purpose, an integrated reactor composed of an anaerobic ceramic membrane bioreactor and N anaerobic fluidized bed (AnCMBR-AFB) was built and pollutant removal efficiency, nitrogen and phosphorus recovery characteristics, and membrane pollution features of this integrated reactor were investigated. The results revealed that the integrated reactor had good pollutant removal efficiency, with turbidity, chromaticity, and UV254 average values of the effluent being 0.470 NTU, 0.011 A, and 0.057 cm-1, respectively, and the average CODCr removal rate was 80%. The nitrogen and phosphorus recoveries were significantly higher than the nitrogen and phosphorus removal rates of conventional AnMBR at 23.20 ± 1.17% and 43.34 ± 1.54%, respectively. Microscopic analysis revealed the formation of magnesium ammonium phosphate (MAP) crystals on the carrier's surface, and friction between the carrier and the membrane surface could delay membrane fouling while allowing the contaminated membrane surface to retain significant roughness. Membrane fouling was mostly brought on by amides and saturated hydrocarbons, and inorganic metal ions also played a role to some extent.

Hydrophilicity gradient in covalent organic frameworks for membrane distillation.

Desalination can help to alleviate the fresh-water crisis facing the world. Thermally driven membrane distillation is a promising way to purify water from a variety of saline and polluted sources by utilizing low-grade heat. However, membrane distillation membranes suffer from limited permeance and wetting owing to the lack of precise structural control. Here, we report a strategy to fabricate membrane distillation membranes composed of vertically aligned channels with a hydrophilicity gradient by engineering defects in covalent organic framework films by the removal of imine bonds. Such functional variation in individual channels enables a selective water transport pathway and a precise liquid-vapour phase change interface. In addition to having anti-fouling and anti-wetting capability, the covalent organic framework membrane on a supporting layer shows a flux of 600 l m-2 h-1 with 85 °C feed at 16 kPa absolute pressure, which is nearly triple that of the state-of-the-art membrane distillation membrane for desalination. Our results may promote the development of gradient membranes for molecular sieving.

Study on pickling technology to control fouling of ceramic membrane treating secondary treated effluent.

The application of membrane technology in the field of water treatment was increasingly widespread, but membrane fouling still restricted its development, and the membrane needed to be chemically cleaned. This research focused on the high-efficiency pickling technology of ceramic membrane, and developed the cleaning technology of ceramic membrane in cooperation with surfactant. In the experiment, the municipal secondary effluent was used as the raw water, and the single-step, mixed and step-by-step cleaning effects of three strong acids, three weak acids and surfactants on ceramic membranes and polyvinylidene difluoride (PVDF) membranes were investigated. For ceramic membrane, the optimal cleaning combination was H2SO4 first and then DTAC, and the flux recovery rate could reach 96.94%; for PVDF membrane, the optimal cleaning combination was HNO3 first and then H2SO4, and the flux recovery rate could reach 93.72%. In addition, the surface of initial, polluted, and cleaned membranes were analyzed by scanning electron microscope and contact angle, and the fouling mechanism of the ceramic membrane was analyzed. The results showed that through physical cleaning and chemical cleaning, most of the pollutants on the membrane surface and pores were removed. The cleaning method can effectively control the membrane pollution.

Encapsulating a Single Nanoprobe in a Multifunctional Nanogel for High-Fidelity Imaging of Caspase Activity in Vivo.

The formation of a protein corona on nanoprobes in the blood can not only reduce the delivery efficiency to their destination but also inhibit the functions of the nanoprobes. Herein, we report a multifunctional nanogel that can shield a single gold nanoparticle (AuNP) probe from interaction with the serum proteins, virtually eliminating protein corona formation on the nanoprobes. As a result, the delivery efficiency of the nanogel-encapsulated nanoprobes to tumors was dramatically enhanced. When the probes are delivered into target cells, the nanogel shells are degraded in acidic endosomes, where a proton sponge effect occurs instantaneously to release the AuNP probes into the cytoplasm to realize their bioimaging functions. We demonstrated the applicability of these probes for high-fidelity, noninvasive imaging of caspase activity in both cancer cells and in tumors. This strategy offers an exciting opportunity to design high-efficacy nanoprobes for in vivo imaging.

Co-pyrolysis of biomass and waste tires under high-pressure two-stage fixed bed reactor.

The distribution of biomass pyrolysis products under high pressure have rarely been reported. In this study, the effect of pressure on the product distribution of pine sawdust (PS) pyrolysis was studied. The synergistic effect of the side wall rubber (SWR) and PS was confirmed under pressurized conditions. Calcined bottom ash (CBA) and SWR char (SWRC) were used to enhance the quality of the pressurized co-pyrolysis products. The PS and SWR pyrolysis chars obtained under high pressure conditions exhibited serious melting and cross-linking problem. The CO2 content decreased to 19.96 vol% in co-pyrolysis gas with the CBA/SWRC7/3 catalyst. The water content decreased by 85.71% after the SWRC catalyst in the pressurized co-pyrolysis process. Compared with the concentration of benzene in PS and SWR oil, the concentration of benzene in SWR/PS7/3 oil without catalysts increased by 9.57 times and 0.25 times, respectively.

Efficient transport of droplet sandwiched between saw-tooth plates.

The transport of droplet sandwiched between smooth and saw-tooth plates was investigated using molecular dynamics method. The repeated opening and closing of the plates result in sequential stretching and squeezing of the droplet, which provide the driving force. The asymmetrical saw tooth obstructs the backward motion of the droplet, and gives rise to a net forward displacement of the droplet in every opening and closing cycle. This unidirectional motion facilitates the efficient droplet transport, which is referred to as the ratchet-like effect in this work. Our simulations also reveal that the influence of the surface wettability on the droplet transport is different for saw-tooth and smooth plates. Droplet transport efficiency exhibits monotonic decrease with the increase of the solid-liquid interactions for saw-tooth plates. While for smooth plates, unidirectional droplet movement was only observed for certain solid-liquid interactions. Taken together these simulation results and theoretical analysis, we demonstrate that hydrophobic saw-tooth plates can improve the transport efficiency significantly. These findings not only enhance our understanding of the droplet transport from atomistic scale, but also are beneficial to practical applications in designing of micro- and nano-fluidic systems.