Bone response in vivo of Ti-45Zr alloy as dental implant material.

Ti-Zr alloys have gained increasing attention as a new metallic biomaterial, being used as implants for both orthopedics and dentistry. More recently, our group found promising results for the Ti-45Zr alloy, which presented a low elastic modulus, a pronounced and excellent mechanic character, and excellent cell compatibility in vitro. However, its biocompatibility and potential to promote osteogenesis in vivo remained unclear. In the present study, the biocompatibility, osteointegration ability, and immune response effects of the Ti-45Zr alloy were evaluated in animal experiments. The results showed that the alloy had good blood compatibility and no body side effects. After implantation in vivo, the inflammation turned out well and was beneficial to the polarization of macrophages. Additionally, the Ti-45Zr alloy presented a good osteointegration ability. Overall, these results confirmed that the Ti-45Zr alloy can be used as a dental implant material.

Risk assessment and integrated surveillance of foot-and-mouth disease outbreaks in Russia based on Monte Carlo simulation.

BACKGROUND: Foot-and-mouth disease (FMD) is a highly contagious disease of livestock worldwide. Russia is a big agricultural country with a wide geographical area where FMD outbreaks have become an obstacle for the development of the animal and animal products trade. In this study, we aimed to assess the export risk of FMD from Russia. RESULTS: After simulation by Monte Carlo, the results showed that the probability of cattle infected with FMD in the surveillance zone (Surrounding the areas where no epidemic disease has occurred within the prescribed time limit, the construction of buffer areas is called surveillance zone.) of Russia was 1.29 × 10- 6. The probability that at least one FMD positive case was exported from Russia per year in the surveillance zone was 6 %. The predicted number of positive cattle of the 39,530 - 50,576 exported from Russia per year was 0.06. A key node in the impact model was the probability of occurrence of FMD outbreaks in the Russian surveillance zone. By semi-quantitative model calculation, the risk probability of FMD defense system defects was 1.84 × 10- 5, indicating that there was a potential risk in the prevention and control measures of FMD in Russia. The spatial time scan model found that the most likely FMD cluster (P < 0.01) was in the Eastern and Siberian Central regions. CONCLUSIONS: There was a risk of FMDV among cattle exported from Russia, and the infection rate of cattle in the monitored area was the key factor. Understanding the export risk of FMD in Russia and relevant epidemic prevention measures will help policymakers to develop targeted surveillance plans.

Two new xanthones, a new lignin, and twenty phenolic compounds from Smilax china and their NO production inhibitory activities.

Two new xanthones smilone A (1), smilone B (2), and a new lignin smilgnin A (3) were isolated from the rhizomes of Smilax china L., together with three known xanthones (4-6), four lignins (7-10), two flavones (11, 12), two stilbenoids (13, 14), and ten organic phenoloids (15-24). Of them, compounds 4-6 were isolated from the genus Smilax for the first time. The structures of 1-24 were elucidated by the extensive analysis of spectral data and compared with the literature. All compounds were evaluated for their inhibitory effects against LPS-induced NO production in RAW264.7 macrophages. Among them, compound 24 exhibited significant inhibitory activity against NO production (IC50 = 1.26 µM), while compounds 3, 6, and 7 showed weak activities at the concentration of 50 µM.[Formula: see text].

Uniform core-shell photonic crystal microbeads as microcarriers for optical encoding.

We demonstrate a rapid and robust method to fabricate uniform core-shell photonic crystal (PC) microbeads by the microfluidic and centrifugation-redispersion technique. Colored crystalline colloidal arrays (CCAs) were first prepared through centrifugation-redispersion approach by self-assembly of polystyrene-poly(N-isopropylacrylamide) (PS-PNIPAm) core/shell nanoparticles (NPs). Different from the conventional NPs (e.g., charged PS or PNIPAm NPs), PS-PNIPAm NPs could easily self-assemble into well-ordered CCAs by only one purification step without laborious pretreatment (e.g., dialysis or ion exchange) or slow solvent-evaporation process. The CCAs is then encapsulated into a transparent polymer shell with functional groups (e.g., copolymer of ETPTA and butyl acrylate (BA)), triggering the formation of core-shell PC microbeads which can be used as optical encoding microcarriers. Importantly, this technique allows us to produce core-shell PC microbeads in a rapid and robust way, and the optical reflections of the PC microbeads appear highly stable to various external stimuli (e.g., temperature, pH value, and ionic strength) relying on the features of the CCAs core and protection of the polymer shell. Moreover, various probe biomolecules (e.g., proteins, antibodies, and so on) can be easily linked on the surface of the core-shell PC microbeads owing to the hydrophilic modification induced by the hydrolysis of BA on the microbead surface, enabling the multiplex biomolecular detection.

Analysis of multiple pathways and levels of fluoride intake in fluorosis areas of Southwest China.

In the coal-burning fluorosis areas of China, over 10 million people suffer from dental fluorosis caused by multiple pathways of fluoride intake. However, the link between dental fluorosis prevalence, the geochemical distribution of fluoride, and contributions of different exposure pathways remain unclear. Here, we aimed to quantify the various fluoride exposure pathways and establish the association between dental fluorosis and fluoride intake in Southwest China. Epidemiological data on the peak time of fluorosis prevalence were combined with geochemical analyses of the fluoride content in coal and clay over a large scale, the amounts and ratios of fluoride intake through different exposure pathways were calculated, and the association between the total daily fluoride intake (TDFI) and dental fluorosis severity was analyzed. The prevalence of dental fluorosis was not significantly correlated with the fluoride geo-background of coal and clay on a large scale (P > 0.05). The co-combustion of coal and clay contained in hand-made briquettes is the main pathway of fluoride contamination, which occurs through the inhalation of polluted air and consumption of contaminated roasted products. Furthermore, the TDFI per person ranged from 2.78 to 17.32 mg, and it was significantly positively correlated with the prevalence of dental fluorosis (P < 0.05). The TDFI from breathing and eating was 1.1-3.2 mg and 1.1-15.1 mg, which accounted for 9%-54% and 40%-90% of the total TDFI, respectively. The combination of living habits and soil geochemical fluoride anomalies resulted in the higher prevalence of fluorosis in rural areas of Southwest China.

Microstructure, mechanical properties and osseointegration ability of Ta-20Zr alloy used as dental implant material.

The aim of this study was to evaluate the application prospect of a tantalum (Ta) and zirconium (Zr) alloy as a dental implant material. The Ta-20Zr (wt.%) alloy was prepared by powder metallurgy, and its microstructure and mechanical properties were analyzed by standard techniques. The effect of Ta-20Zr alloy on inflammation, bone remodeling and osseointegration was analyzed in rat and rabbit models by biochemical, histological and imaging tests. The Ta-20Zr alloy showed excellent mechanical compatibility with the bone tissue on account of similar elastic modulus (49.2 GPa), thereby avoiding the 'stress shielding effect'. Furthermore, Ta-20Zr alloy enhanced the inflammatory response by promoting secretion of interleukin-6 (IL-6) and IL-10, and facilitated the balance between the M1/M2 macrophage phenotypes. Finally, Ta-20Zr also showed excellent osseointegration and osteogenic ability without any systemic side effects, making it an ideal dental implant material.

Retrospect and Risk Analysis of Foot-and-Mouth Disease in China Based on Integrated Surveillance and Spatial Analysis Tools.

Foot-and-mouth disease (FMD) is a highly contagious disease of livestock and seriously affects the development of animal husbandry. It is necessary to defend the spread of FMD. To explore the distribution characteristics and transmission of FMD between 2010 and 2017 in China, Global Moran's I test and Getis-Ord Gi index were used to analyze the spatial cluster. A space-time permutation scan statistic was applied to analyze the spatio-temporal pattern. GIS-based method was employed to create a map representing the distribution pattern, directional trend, and hotspots for each outbreak. The number of cases was defined as the number of animals with FMD for the above analysis. We also constructed a phylogenetic tree to compare the homology and variation of FMD virus (FMDV) to provide a clue for the potential development of an effective vaccine. The results indicated that the FMD outbreaks in China had obvious time patterns and clusters in space and space-time, with the outbreaks concentrated in the first half of each year. The outbreaks of FMD decreased each year from 2010 with an obvious downward trend of hotspots. Spatial analysis revealed that the distribution of FMD outbreaks in 2010, 2015, and 2017 exhibited a clustered pattern. Space-time scanning revealed that the spatio-temporal clusters were centered in Guangdong, Tibet and the junction of Wuhan, Jiangxi, Anhui. Comparison of the spatial analysis and space-time analysis of FMD outbreaks revealed that Guangdong was the same cluster of the two in 2010. In addition, the directional trend analysis indicated that the FMD transmission was oriented northwest-southeast. The findings demonstrated that FMDV in China can be divided into three pedigrees and the homology of these strains is very high while comparing the first FMDV strain with the others. The data provide a basis for the effective monitoring and prevention of FMD, and for the development of an FMD vaccine in China.

Enhanced activity and stability of industrial lipases immobilized onto spherelike bacterial cellulose.

This study focused on improving activity and stability of industrial lipases by means of enzymatic immobilization onto spherelike bacterial cellulose (SBC) newly synthesized by a particular bacterial strain (Gluconacetobacter xylinus, JCM 9730). The results revealed that immobilizing lipases onto aldehyde-modified SBC with a size of 6.10±0.50mm could lead to two optimal hydrolytic activities of lipases under both acidic (pH 5) and alkaline conditions (pH 8), which was superior to free lipases that only exhibited an alkaline activity at pH 9. In addition, immobilizing lipases onto SBC could also achieve an improved active temperature below 30°C for lipases, which would help to reduce the energy consumption in the industrial production. Overall, this novel biomaterial has great potential as a green carrier for the immobilization of industrial lipases to enhance the recycling hydrolytic capability of oils and fats in various industrial divisions.

[Epidemiological analysis on 589 children with hand-foot-mouth disease from Xianju county of Zhejiang province].

OBJECTIVE: To investigate the epidemiological characteristics of hand-foot-mouth disease. METHODS: A total of 589 children from Xianju county, Zhejiang province with hand-foot-mouth disease in 2013 were recruited in the study and the diagnosis went through clinical and laboratory confirmation. Attributes that were analyzed included gender, age, month of occurrence, regional distribution and clinical presentation. RESULTS: The incidence rate of hand-foot-mouth disease in Xianju county for the year was 102.72/100 000, with 12 severe cases but no death. There were clearly more boys than girls, with a male to female ratio of 1.29 :1, which was statistically significant (χ(2) = 14.274, P < 0.001). The vast majority of patients were 0-3 years old, representing 94.74% of the patients. The occurrences were concentrated in the period from April to August and November, with April as the high-incidence season. High incidence areas were the countryside and suburbs, making up 45.50% and 30.73%, respectively, of all cases. Most patients were in preschools or scattered home care environments, accounting for 51.10% and 40.92% , respectively. Clinical presentation was characterized by fever and various kinds of vesicles or papules at the hand, foot, mouth or buttocks. CONCLUSION: Most of hand-foot-mouth disease cases occur in younger children in areas with inadequate knowledge of hygiene, with seasonal variation.