Preparation of ethyl cellulose particles with different morphologies through microfluidics.

The sizes and shapes of polymer particles determine their performance and application. In this paper, ethyl cellulose particles with different morphologies are generated through extraction and solidification in a microfluidic device with double T-junctions. Droplets of ethyl acetate containing ethyl cellulose are formed first, then, pure water is employed to extract the solvents in the droplets and the ethyl cellulose is solidified to form monodisperse particles. By changing the flow rates of the continuous phase and the dispersed phase and the concentration of ethyl cellulose, red-blood-cell-like, doughnut-like, dimpled and spherical particles are fabricated, and the regime of different particle morphologies is given. The more important is that the physical mechanisms and explanations of the formation of different particle morphologies are clearly disclosed by analyzing the circulation flows outside and inside the droplets. The flow patterns in the microchannel, and the diffusion and solidification properties of the molecules are the key factors that affect the final morphology of particles. Due to the circulation, there are two stagnation points at the front and rear of the droplet, and they are the approximate locations where the dimple in the dimpled particle, the hole in the doughnut-like particle and the two pits in the red-blood-cell-like particles are formed. These analysis and results are useful in flow chemistry, in the fabrication of particle materials, and so on.

Resection of Tumors Located in the Anterior Skull Base and Sellar Region Through the Supraorbital Keyhole Approach via a Forehead Wrinkle Incision: Modifications and Deficiencies.

OBJECTIVE: To investigate the clinical effect of the supraorbital keyhole approach (SKA) via a forehead wrinkle incision in the resection of tumors in the anterior skull base and sellar region. METHODS: Sixty patients with tumors located in the anterior skull base and sellar region treated through the SKA in our hospital from 2017 to 2020. The skin incision and bone flap position were designed individually according to the size and growth of the tumor. The clinical data of the patients were retrospectively analyzed. RESULTS: Based on the feasibility of this surgical approach, personalized skin incisions and bone flaps were designed for different lesions. Among the 60 patients, gross total resection was achieved in 53 cases (88.3%), for meningiomas 97.8% (46/47) and near-total resection in 7 cases (11.7%). In the survey of the patients' scale scores toward skin incision after operation, the "no pain" level was 90.0% (54/60) and 91.7% (55/60) for the level of "very satisfactory" of the aesthetic of the skin incision (as shown in Supplementary Digital Content, Table 2, http://links.lww.com/ SCS/D742). Three patients whose satisfaction with the aesthetic of the incision excelled scale 3, suggesting that they were not completely satisfied with the wound healing. No permanent skin incision discomfort was noted during follow-up. There were no surgical deaths. CONCLUSIONS: The SKA via forehead wrinkle incision is a flexible and feasible method for tumors near the midline of the anterior skull base and sellar region. However, this approach requires strict preoperative planning, which includes choosing appropriate tumors and applicable forehead wrinkles.

PaLectinL7 enhances salt tolerance of sweet cherry by regulating lignin deposition in connection with PaCAD1.

Lectin receptor-like kinases (LecRLKs), a large family of plant receptor-like kinases, play an important role in plant response to abiotic stresses. However, little information is available about the roles of LecRLKs in the salt stress response of sweet cherry (Prunus avium). Here, an L-type LecRLK gene (PaLectinL7) was characterized from sweet cherry. Subcellular localization analysis revealed that PaLectinL7 is a plasma membrane protein. The expression of PaLectinL7 was up-regulated by salt, drought and exogenously gibberellin treatments. Overexpression of PaLectinL7 in the roots of Gisela 6 enhanced its tolerance to salt stress. Additionally, transcriptome analysis showed that lignin metabolic-related genes were regulated by PaLectinL7 overexpression. Meanwhile, the lignin contents and associated enzymes (CAD and COMT) rose concurrently with PaLectinL7 overexpression under salt stress. We also found that PaCAD1, a key enzyme involved in lignin metabolism, interacted with PaLectinL7 and could be phosphorylated by PaLectinL7 in vitro, suggesting that PaLectinL7 may regulate the enzyme activity of PaCAD1. Therefore, these results indicated that PaLectinL7, as a membrane-bound regulator, promoted lignin deposition by regulating the activities of enzymes related to lignin metabolism, thus enhancing salt tolerance.

2,6-Azulene-based Homopolymers: Design, Synthesis, and Application in Proton Exchange Membrane Fuel Cells.

Azulene-based homopolymers are of great interest from the point view of chemistry and material science. Herein, by means of Friedel-Crafts acylation to introduce solubilizing chains on the 1-position of azulene, we designed and synthesized two examples of 2,6-azulene-based homopolymers RP(Az-AC16) and P(Az-AC16). The arrangement of 2,6-azulene units is irregular for RP(Az-AC16), while P(Az-AC16) has head-to-head/tail-to-tail arranged 2,6-azulene units. Proton-responsive studies demonstrate that RP(Az-AC16) and P(Az-AC16) show reversible proton responsiveness in both solution and thin film. To utilize the dynamically reversible proton-responsive property of these polymers in thin films, RP(Az-AC16) and P(Az-AC16) were incorporated into a Nafion matrix as proton exchange membranes, wherein the Nafion/P(Az-AC16) composite membrane exhibits significant increases in proton conductivity relative to the Nafion membrane at different temperatures of each relative humidity (RH), which further results in a 64% improvement in hydrogen fuel cell output power under 30% RH at 80 °C. Our studies have realized the first solution synthesis of 2,6-azulene-based homopolymers and the first application of azulene-based π-systems in hydrogen fuel cells.

Fabrication of advanced particles and particle-based materials assisted by droplet-based microfluidics.

Recent advances in the fabrication of complex particles and particle-based materials assisted by droplet-based microfluidics are reviewed. Monodisperse particles with expected internal structures, morphologies, and sizes in the range of nanometers to hundreds of micrometers have received a good deal of attention in recent years. Due to the capability of generating monodisperse emulsions and of executing precise control and operations on the suspended droplets inside the microchannels, droplet-based microfluidic devices have become powerful tools for fabricating complex particles with desired properties. Emulsions and multiple-emulsions generated in the microfluidic devices can be composed of a variety of materials including aqueous solutions, gels, polymers and solutions containing functional nanoparticles. They are ideal microreactors or fine templates for synthesizing advanced particles, such as polymer particles, microcapsules, nanocrystals, and photonic crystal clusters or beads by further chemical or physical operations. These particles are promising materials that may be applicable for many fields, such as photonic materials, drug delivery systems, and bio-analysis. From simple to complex, from spherical to nonspherical, from polymerization and reaction crystallization to self-assembly, this review aims to help readers be aware of the many aspects of this field.

Effect of zinc content on the microstructure, in vitro bioactivity, and corrosion behavior of the microarc oxidized Mg-xZn-0.6Ca (x = 3.0, 4.5, 6.0) alloy.

Bioceramic calcium phosphorus (CaP) coatings were prepared on self-designed Mg-xZn-0.6Ca (x = 3.0, 4.5, 6.0 wt. %) alloy by microarc oxidation (MAO). The corrosion resistance, bioactivity, and biodegradability of the CaP coatings prepared on alloys with different zinc (Zn) contents were systematically studied and discussed by potentiodynamic polarization and in vitro immersion tests in the simulated body fluid solution. The CaP coatings and corrosion products were characterized by scanning electron microscopy, energy dispersive spectrometry, x-ray diffraction, and Fourier transform infrared spectroscopy. Based on the difference of microstructure caused by zinc content, the effect of microstructure on the properties of MAO coatings was analyzed by taking grain boundary and second phase defects as examples. Results showed that the CaP coatings could be prepared on the surface of the self-designed Mg-Zn-0.6Ca alloy by MAO. The CaP coatings have good bioactivity. Meanwhile, the Zn content has a significant effect on the microstructure of the CaP coatings. When the Zn content is 3.0 wt. %, the corrosion resistance and biocompatibility of the CaP coatings are obviously improved with good biological properties.

Enterovirus 71 induces autophagy in mice via mTOR inhibition and ERK pathway activation.

AIMS: Enterovirus 71 (EV71) is one of the main viruses that cause hand-foot-mouth disease; however, its pathogenic mechanism remains unclear. This study characterized the relationship between EV71 infection and autophagy in vivo and explored the molecular mechanism underlying EV71-induced autophagy. MATERIALS AND METHODS: A mouse model of EV71 infection was prepared by intraperitoneally injecting one-day-old BALB/c suckling mice with 30 µL/g of EV71 virus stock solution for 3 days. The behavior, fur condition, weight, and mice mortality were monitored, and disease scores were calculated. The pathological damage to the brain, lung, and muscle tissues after the viral infection was assessed by hematoxylin and eosin staining. Western blot and immunofluorescence analyses were used to detect the expression levels of viral protein 1, Beclin-1, microtubule-associated protein light chain 3B, mammalian target of rapamycin (mTOR), phosphorylated (p)-mTOR, extracellular signal-regulated protein kinase (ERK) 1/2, and p-ERK. KEY FINDINGS: EV71 infection can trigger autophagy in the brains, lungs, and muscles of infected mice. The autophagy response triggered by EV71 is achieved by the simultaneous mTOR inhibition and the ERK pathway activation. Blocking the mTOR pathway may aggravate autophagy, whereas ERK inhibition alleviates autophagy but cannot completely prevent it. SIGNIFICANCE: EV71 infection can induce autophagy in mice, involving mTOR and ERK signaling pathways. These two signaling pathways are independent and do not interfere with each other.

Artificial ion channels regulating light-induced ionic currents in photoelectrical conversion systems.

Artificial ion channels are introduced into a photosystem II photoelectrical conversion system to mimic the photocurrent regulating of the natural PSII energy system on the thylakoid membrane. In the composite system, PSII complexes act as pumps to convert light into currents and artificial ion channels act as valves to regulate light-induced ionic currents.

Enhanced pervaporative desulfurization by polydimethylsiloxane membranes embedded with silver/silica core-shell microspheres.

Pervaporative desulfurization based on membrane technology provides a promising alternative for removal of sulfur substances (as represented by thiophene) in fluid catalytic cracking (FCC) gasoline. The present study focused on the performance enhancement of polydimethylsiloxane (PDMS) membrane by incorporation of core-shell structured silver/silica microspheres. A silane coupling agent, N-[3-(trimethoxysily)propyl]-ethylenediamine (TSD), was used to chelate the Ag(+) via its amino groups and attach the silver seeds onto the silica surface via condensation of its methoxyl groups. The resultant microspheres were characterized by Zeta-positron annihilation lifetime spectroscopy (ZetaPALS), inductively coupled plasmaoptical emission spectrophotometer (ICP), transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The Ag(+)/SiO(2)-PDMS composite membranes were prepared by blending PDMS with the as-synthesized silver/silica microspheres. PALS analysis was used to correlate the apparent fractional free volume with permeation flux. The sorption selectivity towards thiophene was enhanced after incorporation of silver/silica microspheres due to the π-complexation between the silver on the microsphere surface and the thiophene molecules. The pervaporative desulfurization performance of the composite membrane was investigated using thiophene/n-octane mixture as a model gasoline. The composite membrane exhibited an optimum desulfurization performance with a permeation flux of 7.76 kg/(m(2)h) and an enrichment factor of 4.3 at the doping content of 5%.