Autologous Costal Cartilage With Expanded Polytetrafluorethylene (ePTFE) Implants for the Treatment of Nasal Deformity After Unilateral Cleft Lip Repair.

OBJECTIVE: To repair and reconstruct the secondary nasal deformity after unilateral cleft lip repair, we used autologous costal cartilage and expanded polytetrafluorethylene (ePTFE) to get a better nasal shape. METHOD: Nineteen patients with nasal deformity after unilateral cleft lip repair were treated from July 2018 to July 2021. During the operation, autologous costal cartilage was carved and formed and then implanted into the nasal tip and nasal columella, while the back of the nose was raised with ePTFE. RESULT: Nineteen cases were followed up for 6 to 30 months. No transplanted cartilage and swelling were exposed or discharged. The appearance was good, and the patients were satisfied. CONCLUSION: Autologous costal cartilage combined with ePTFE is an ideal treatment for nasal deformity after cleft lip repair.

Chin Augmentation With Hyaluronic Acid: An Injection Technique Based on Anatomical Morphology.

BACKGROUND: Chin augmentation with hyaluronic acid (HA) injections can effectively improve mental appearance. OBJECTIVE: To introduce a HA injection technique for chin augmentation and evaluate its clinical effects. METHODS: A total of 326 patients who received HA injection for chin augmentation from January 2018 to May 2021 were retrospectively reviewed. All patients were injected with the technique according to the anatomical morphology of the chin using a needle and cannula. Patient data were collected, the effects were analyzed, and adverse reactions were observed and recorded. RESULTS: There were 326 patients involved in this study with a mean age of 26.4 years. The median volume of HA injected was 1.85 mL. The shape and contour of the chin was significantly improved in all patients immediately after injection. Most improvements were retained up to 6 months and partial improvements remained visible for 12 months. Swelling and pain occurred in 284 patients (87.1%), local ecchymosis occurred in 31 patients (9.5%), and asymmetry was found in 8 patients (2.5%). There were no other complications such as infection, embolism, necrosis, nodule, or witch's chin. All patients reported satisfaction with results of the HA injections. CONCLUSION: Injection of HA according to the anatomical morphology of the chin is a safe and effective technique for chin augmentation and results in high patient satisfaction.

Waste-to-Resource Strategy to Fabricate Functionalized MOFs Composite Material Based on Durian Shell Biomass Carbon Fiber and Fe3O4 for Highly Efficient and Recyclable Dye Adsorption.

Recently, metal-organic frameworks (MOFs), which are porous inorganic-organic hybrid materials consisting of metal ions (clusters or secondary building units) and organic ligands through coordination bonds, have attracted wide attention because of their high surface area, huge ordered porosity, uniform structural cavities, and excellent thermal/chemical stability. In this work, durian shell biomass carbon fiber and Fe3O4 functionalized metal-organic framework composite material (durian shell fiber-Fe3O4-MOF, DFM) was synthesized and employed for the adsorption removal of methylene blue (MB) from wastewater. The morphology, structure, and chemical elements of the DFM material were characterized by scanning electron microscope (SEM), X-ray diffraction (XRD), transmission electron microscope (TEM), and X-ray photoelectron spectroscope (XPS) techniques. Adsorption conditions such as pH, adsorption time, and temperature were optimized. The adsorption isotherm and kinetics results show that the adsorption process of DFM material to MB is more in line with the Freundlich model and pseudo-second-order kinetic model. Using these models, the maximum adsorption capacity of 53.31 mg/g was obtained by calculation. In addition, DFM material could be easily reused through an external magnet and the removal rate of MB was still 80% after five adsorption cycles. The obtained results show that DFM composite material, as an economical, environmentally friendly, recyclable new adsorbent, can simply and effectively remove MB from wastewater.

Surface Permeability of Membrane and Catalytic Performance Based on Redox-Responsive of Hybrid Hollow Polymeric Microcapsules.

"Smart" polymeric microcapsules with excellent permeability of membranes have drawn considerable attention in scientific and industrial research such as drug delivery carriers, microreactors, and artificial organelles. In this work, hybrid hollow polymeric microcapsules (HPs) containing redox-active gold-sulfide bond were prepared with bovine serum albumin, inorganic metal cluster (AuNCs), and poly(N-isopropylacrylamide) conjugates by using Pickering emulsion method. HPs were transferred from water-in-oil to water-in-water by adding PEGbis(N-succinimidylsuccinate). To achieve redox-responsive membrane, the Au-S bond units incorporated into the microcapsules' membranes, allowed us to explore the effects of a new stimuli, that is, the redox Au-S bond breaking on the microcapsules' membranes. The permeability of these hybrid hollow polymeric microcapsules could be sensitively tuned via adding environment-friendly hydrogen peroxide (H2O2), resulting from a fast fracture of Au-S bond. Meanwhile, AuNCs and conjugates could depart from the microcapsules, and enhance the permeability of the membrane. Based on the excellent permeability of the membrane, phosphatase was encapsuled into HPs and p-nitrophenyl phosphate as a substrate. After adding 1 × 10-2 and 1 × 10-4 M H2O2, the catalytic efficiency was nearly 4.06 and 2.22 times higher than that of HPs in the absence of H2O2, respectively. Hence, the unique redox-responsive HPs have potential applications in biocatalytic reaction, drug delivery, and materials as well as in bioscience.

MicroRNA-21 promotes orthodontic tooth movement by modulating the RANKL/OPG balance in T cells.

OBJECTIVES: The present study was designed to investigate the effects of microRNA-21 (miR-21) on orthodontic tooth movement. METHODS: The orthodontic tooth movement model was established in C57BL/6 and miR-21-/- mice with or without implantation of activated T cells. Histological and histomorphometrical analyses were performed by hematoxylin-eosin staining. Tartrate-resistant acid phosphate staining was used to analyze the osteoclast numbers during tooth movement. Enzyme-linked immunosorbent assay, reverse transcription polymerase chain reaction, and immunohistochemistry analysis were used to examine the expression of RANKL and OPG. RESULTS: In miR-21-/- mice, the distance of tooth movement was retarded, the osteoclast number was decreased, and serum RANKL expression was strongly reduced. MiR-21 promoted the secretion of RANKL from activated T cells. Furthermore, activated T cells could partially rescue the decreased orthodontic tooth movement distance in miR-21-/- mice. MiR-21 was shown to promote orthodontic tooth movement by modulating the RANKL/OPG balance in T cells. CONCLUSIONS: The impact of miR-21 on tooth movement was better elucidated, furthering our understanding of its role and clinical applications in orthodontics.

Development of Timolol-Loaded Galactosylated Chitosan Nanoparticles and Evaluation of Their Potential for Ocular Drug Delivery.

This study was conducted to develop timolol maleate (TM)-loaded galactosylated chitosan (GC) nanoparticles (NPs) (TM-GC-NPs) followed by optimization via a four-level and three-factor Box-Behnken statistical experimental design. The optimized nanoparticles showed a particle size of 213.3 ± 6.83 nm with entrapment efficiency of 38.58 ± 1.31% and drug loading of 17.72 ± 0.28%. The NPs were characterized with respect to zeta potential, pH, surface morphology, and differential scanning calorimetry (DSC). The determination of the oil-water partition coefficient demonstrated that the TM-GC-NPs had a high liposolubility at pH 6 as compared to timolol-loaded chitosan nanoparticles (TM-CS-NPs) and commercial TM eye drops. The in vitro release study indicated that TM-GC-NPs had a sustained release effect compared with the commercial TM eye drops. Ocular tolerance was studied by the hen's egg chorioallantoic membrane (HET-CAM) assay and the formulation was non-irritant and could be used for ophthalmic drug delivery. The in vitro transcorneal permeation study and confocal microscopy showed enhanced penetration, and retention in the cornea was achieved with TM-GC-NPs compared with the TM-CS-NPs and TM eye drops. Preocular retention study indicated that the retention of TM-GC-NPs was significantly longer than that of TM eye drops. The in vivo pharmacodynamic study suggested TM-GC-NPs had a better intraocular pressure (IOP) lowering efficacy and a prolonged working time compared to commercial TM eye drops (P ≤ 0.05). The optimized TM-GC-NPs could be prepared successfully promising their use as an ocular delivery system.

Focal adhesion kinase knockdown in carcinoma-associated fibroblasts inhibits oral squamous cell carcinoma metastasis via downregulating MCP-1/CCL2 expression.

Carcinoma-associated fibroblasts (CAFs) have been demonstrated to play an important role in the occurrence and development of oral squamous cell carcinoma (OSCC). The aim of this study is to investigate the influence of CAFs on OSCC cells and to explore the role of focal adhesion kinase (FAK) in this process. The results showed that oral CAFs expressed a higher level of FAK than normal human gingival fibroblasts (HGFs), and the conditioned medium (CM) of CAFs could induce the invasion and migration of SCC-25, one oral squamous carcinoma cell line. However, knockdown of FAK by small interfering RNA (siRNA) resulted in inhibition of CAF-CM induced cell invasion and migration in SCC-25, probably by reducing the production of monocyte chemoattractant protein-1 (MCP-1/CCL2), one of downstream target chemokines. Therefore, our findings indicated that targeting FAK in CAFs might be a promising strategy for the treatment of OSCC in the future.

Evaluation of deproteinised bovine bone matrix combined with absorbable biofilm for the preservation of extraction sites of mandibular impacted wisdom teeth.

BACKGROUND: Bone defects and deep periodontal pockets often exist distal to the second molar after mandibular third molar extraction, seriously threatening the periodontal health of the second molar. OBJECTIVE: To evaluate the effect of socket preservation with bone substitute materials on alveolar bone resorption and prevention of the distal periodontal defect of the adjacent tooth after mandibular impacted third molar extraction compared with natural healing. METHODS: Ninety-nine patients with mandibular impacted teeth, treated in our hospital from January 2018 to December 2020, were randomly divided into the control and experimental groups. The experimental group underwent minimally invasive tooth extraction and socket preservation using the deproteinised bovine bone mineral, Bio-Oss and the bioabsorbable collagen membrane, Bio-Gide. The control group healed naturally after minimally invasive tooth extraction. The alveolar ridge dimension of the extraction sites, the probing depth, tooth mobility and gingival index on the distal aspect of the mandibular second molars were examined and recorded before and six months after the operations. RESULTS: There was a significant difference between the experimental group and the control group in the alveolar bone width (P< 0.05) and height (P< 0.05) before and after surgery. The probing depth of the extraction sites in both groups was reduced. CONCLUSION: Using Bio-Oss and Bio-Gide to preserve extraction sites of impacted teeth can promote recovery more effectively than natural healing on the height of the distal alveolar bone and the width of the alveolar crest of the second molar and thus improve the periodontal status of the adjacent second molar.

Surface-programmed microbiome assembly in phycosphere to microplastics contamination.

Recalcitrance in microplastics accounts for ubiquitous white pollution. Of special interest are the capabilities of microorganisms to accelerate their degradation sustainably. Compared to the well-studied pure cultures in degrading natural polymers, the algal-bacterial symbiotic system is considered as a promising candidate for microplastics removal, cascading bottom-up impacts on ecosystem-scale processes. This study selected and enriched the algae-associated microbial communities hosted by the indigenous isolation Desmodesmus sp. in wastewater treatment plants with micro-polyvinyl chloride, polyethylene terephthalate, polyethylene, and polystyrene contamination. Results elaborated that multiple settled and specific affiliates were recruited by the uniform algae protagonist from the biosphere under manifold microplastic stress. Alteration of distinct chemical functionalities and deformation of polymers provide direct evidence of degradation in phycosphere under illumination. Microplastic-induced phycosphere-derived DOM created spatial gradients of aromatic protein, fulvic and humic acid-like and tryptophan components to expanded niche-width. Surface thermodynamic analysis was conducted to simulate the reciprocal and reversible interaction on algal-bacterial and phycosphere-microplastic interface, revealing the enhancement of transition to stable and irreversible aggregation for functional microbiota colonization and microplastics capture. Furthermore, pangenomic analysis disclosed the genes related to the chemotaxis and the proposed microplastics biodegradation pathway in enriched algal-bacterial microbiome, orchestrating the evidence for common synthetic polymer particles and ultimately to confirm the effectiveness and potential. The present study emphasizes the necessity for future endeavors aimed at fully leveraging the potential of algal-bacterial mutualistic systems within sustainable bioremediation strategies targeting the eradication of microplastic waste.

Precipitation contributes to alleviating pollution of rubber-derived chemicals in receiving watersheds: Combining confluent stormwater runoff from different functional areas.

The release of rubber-derived chemicals (RDCs) in road surface runoff has received significant attention. Urban surface runoff is often the confluence of stormwater runoff from specific areas. However, the impact of precipitation on RDCs contamination in confluent stormwater runoff and receiving watersheds remains poorly understood. Herein, we investigated the profiles of RDCs and their transformation products in confluent stormwater runoff and receiving rivers affected by precipitation events. The results showed that 34 RDCs are ubiquitously present in confluent stormwater runoff and surface water, with mean concentrations of 1.03-2749 and 0.28-436 ng/L, respectively. The most dominant target compounds in each category were N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine (6PPD), 6PPD-quinone, 2-benzothiazolol, and 1,3-diphenylguanidine. Total RDCs concentrations in confluent stormwater runoff decreased spatially from industrial areas to business districts to college towns. A significant decrease in RDCs levels in surface water after rainfall was observed (P < 0.01), indicating that precipitation contributes to alleviating RDCs pollution in receiving watersheds. To our knowledge, this is the first report of N,N'-ditolyl-p-phenylenediamine quinone (DTPD-Q) levels in surface waters in China. The annual mass load of ∑RDCs reached 72,818 kg/y in confluent stormwater runoff, while 38,799 kg/y in surface water. The monitoring of confluent stormwater runoff is an efficient measure for predicting contamination loads from RDCs in rivers. Risk assessment suggested that most RDCs posed at least medium risks to aquatic organisms, especially 6PPD-quinone. The findings help to understand the environmental fate and risks of RDCs in the confluent stormwater runoff and receiving environments after precipitation events.

Maxillary Sinus Dimensions in Skeletal Class I Chinese Population with Different Vertical Skeletal Patterns: A Cone-Beam Computed Tomography Study.

Due to the close relationship between the maxillary posterior teeth roots and the maxillary sinus floor, the maxillary sinus can significantly impact various dental treatments, including endodontic procedures and surgical apicectomy, periodontal flap surgery, surgical tooth extraction, dental implantation, and orthognathic surgeries. Specifically, in orthodontics, the location of the maxillary sinus floor may affect tooth movement and insertion of temporary anchorage devices (TADs). This study aims to evaluate the dimensions and location of the maxillary sinus in the Chinese orthodontic patient population with skeletal class I. Using cone-beam computed tomography (CBCT), the volumetric size, height, width, and depth of the sinus and the amount of alveolar bone below the sinus floor and buccal/palatal to the sinus wall were compared between patients of different genders and different vertical skeletal patterns. Unlike the previously reported skeletal class II population, the skeletal class I patients with different vertical patterns do not have significantly different size sinuses. On the other hand, males have larger maxillary sinuses in all parameters than females in the testing population. In addition, no significant correlation was noticed between the SN-MP angle and sinus dimensions or between the ANB angle and sinus dimensions. Nevertheless, the distance from the sinus floor to the alveolar bone crest is not correlated with skeletally sagittal or vertical parameters in females but negatively correlated with the skeletal sagittal parameter in males. In summary, different from the skeletal class II population, there is no significant difference in maxillary sinus size and location among different vertical skeletal patterns in the skeletal class I population. Compared to the skeletal class II population, a higher percentage of the skeletal class I population has an alveolar bone with less than 5 mm thickness, representing a narrowed safe zone of TADs placements.

The incidence and mortality rate of catheter-related neonatal pericardial effusion: A meta-analysis.

BACKGROUD: Neonatal pericardial effusion (PCE) is one of the most severe complications of central catheters in neonates with its rapid progression and high mortality. We aim to estimate the overall incidence and mortality of catheter-related neonatal PCE, more importantly, to identify possible predictors for clinical reference. METHODS: We searched MEDLINE, Embase, Cochrane Library, Web of Science, china national knowledge infrastructure, Wanfang Data, and Sinomed databases for subject words "central catheter," "neonate," "pericardial effusion" and their random words till June 8, 2020. This meta-analysis is based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Possible predictors of occurrences and deaths were extracted and assessed cooperatively. The pooled incidence rate of catheter-related neonatal PCE was calculated using a random effects model. RESULTS: Twenty-one cohort studies and 99 cases were eligible. Pooled incidence is 3·8‰[2.2‰, 6.7‰]. Polyurethane catheters generate significantly more neonatal PCE than silicone counterparts (P < .01). 27% of the patients die. The mortality of patients with bradycardia is higher than others (P < .05). Catheters with a guidewire result in more deaths than umbilical venous catheter (UVC) and peripherally inserted central catheters (PICC) (P < .05). Without pericardiocentesis, mortality increases (P < .01). The difference of deaths between reposition and removing the catheter is insignificant (P > .05). CONCLUSION: Central catheters in Seldinger Technique (with a guidewire) put neonates at greater risk of PCE and consequent death. Silicone catheters excel at avoiding deadly catheter-related PCE, which could be a better choice in neonatal intensive care units (NICU). When catheter-related PCE occurs, timely diagnosis and pericardiocentesis save lives.

Effect of changing the melanoidins by decoction on the release of volatiles in Zhenjiang aromatic vinegar.

Melanoidins, making general contribution to the food characteristics, are extensively generated in the production of Chinese traditional vinegar; however, their effect on flavor modification remains unknown. This study investigated the changes in the melanoidins of Zhenjiang aromatic vinegar (ZAV) during decoction, and the interactions of crude melanoidins (CM) and pure melanoidins (PM) from decocted and undecocted ZAV with mixed aroma compounds were compared. With the exception of CN, OH and CH, chemical bonds and groups varied among the four types of melanoidins. However, CM and PM, obtained from decocted or undecocted vinegar, displayed generally similar structures, which resulted in their consistent retention of volatiles owning to the overall structure characteristics. Compared to aqueous solution, CM and PM from undecocted vinegar exhibited release, non-influence, or adsorption of flavors. However, melanoidins from decocted vinegar appeared the adsorption for all flavors but 2,3,5,6-Tetramethylpyrazine with weakened release. Free low molecular weight (LMw) compounds would affect the volatiles retention. Total solids (TS) from undecocted vinegar adsorbed volatiles except diethyl succinate; however, TS from decocted vinegar released all flavors significantly. Therefore, the decocted melanoidins were beneficial for the persistence of aroma. This study provided a base for elucidating the formation of melanoidins in decoction procedure and their roles in flavor modification.

Bibliometric analysis of research trends in stem cell therapy for knee osteoarthritis over the period 2001-2021.

Stem cell therapy is a promising treatment for knee osteoarthritis, but few bibliometric studies have been performed on the subject. Bibliometric analysis is helpful for identifying the most influential studies in a specific field and can evaluate the global research trends in stem cell therapy for knee osteoarthritis. The Web of Science Core Collection was searched for publications from 2001 to 2021. Publication performance was analyzed using several bibliometric parameters, including VOSviewer, to identify the research landscape of trends in topics, and CiteSpace was investigated to identify the keywords that have the strongest citation bursts. From 2001 to 2021, in total, 1,345 publications explored the research on stem cells in knee osteoarthritis. The United States contributed the largest number of publications and at the top list of international collaborations. Tokyo Medical and Dental University ranked first among institutions in the overall number of articles and citations. The journal of Osteoarthritis and Cartilage had the largest number of publications. Sekiya Ichiro was the most cited author, with 32 articles. The keywords with the most frequent occurrence were "osteoarthritis," "mesenchymal stem cells," and "cartilage," in descending order of frequency. "fibroblast growth factor" and "extracellular vesicle" were the first and last searched theme terms, respectively. The number of publications on stem cells for knee osteoarthritis stays growing. Cartilage repair and paracrine function are current research hotspots for the stem cell therapy mechanism. Stem cell therapy has gradually advanced from basic research to the clinical application stage.

Precisely Tuning the Pore-Wall Surface Composition of Bioceramic Scaffolds Facilitates Angiogenesis and Orbital Bone Defect Repair.

Orbital bone damage (OBD) may result in severe post-traumatic enophthalmos, craniomaxillofacial deformities, vision loss, and intracranial infections. However, it is still a challenge to fabricate advanced biomaterials that can match the individual anatomical structure and enhance OBD repair in situ. Herein, we aimed to develop a selective surface modification strategy on bioceramic scaffolds and evaluated the effects of inorganic or organic functional coating on angiogenesis and osteogenesis, ectopically and orthotopically in OBD models. It was shown that the low thermal bioactive glass (BG) modification or layer-by-layer assembly of a biomimetic hydrogel (Biogel) could readily integrate into the pore wall of the bioceramic scaffolds. The BG and Biogel modification showed appreciable enhancement in the initial compressive strength (∼30-75%) or structural stability in vivo, respectively. BG modification could enhance by nearly 2-fold the vessel ingrowth, and the osteogenic capacity was also accelerated, accompanied with a mild scaffold biodegradation after 3 months. Meanwhile, the Biogel-modified scaffolds showed enhanced osteogenic differentiation and mineralization through calcium and phosphorus retention. The potential mechanism of the enhanced bone repair was elucidated via vascular and osteogenic cell responses in vitro, and the cell tests indicated that the Biogel and BG functional layers were both beneficial for in vitro osteoblastic differentiation and mineralization on bioceramics. Totally, these findings demonstrated that the bioactive ions or biomolecules could significantly improve the angiogenic and osteogenic capabilities of conventional bioceramics, and the integration of inorganic or organic functional coating in the pore wall is a highly flexible material toolbox that can be tailored directly to improve orbital bone defect repair.

[Characterization of vinflunine tartrate liposomes in vitro and in vivo].

Vinflunine tartrate-loaded liposomes (VT-L) with two drug-to-lipid ratios were prepared by pH gradient method. Vesicle size and zeta potential were determined by the Zetasizer Nano ZS. Entrapment efficiency was evaluated by cation exchange resin centrifugalization method. The toxicity and tumor inhibition to nude mouse administrated by VT-L with different drug-to-lipid ratios were investigated and compared with the vinflunine tartrate injection (VT-I). The results showed that the mean particle size, zeta potential and entrapment efficiency of the VT-L with drug-to-lipid ratios of 1 : 5 and 1 : 10 were 124.6 nm and 128.3 nm, -25.3 mV and -22.8 mV, 94.46% and 97.31%, respectively. The VT-L with two different drug-to-lipid ratios has significantly higher anti-tumor effect to nude mouse transplanted human non-small cell lung carcinoma A549 and lower toxicity than VT-I. While there were no significant differences in anti-tumor effect and toxicity between VT-L with two different drug-to-lipid ratios.

The Role of Neutrophil Extracellular Traps in Periodontitis.

Periodontitis is a chronic, destructive disease of periodontal tissues caused by multifaceted, dynamic interactions. Periodontal bacteria and host immunity jointly contribute to the pathological processes of the disease. The dysbiotic microbial communities elicit an excessive immune response, mainly by polymorphonuclear neutrophils (PMNs). As one of the main mechanisms of PMN immune response in the oral cavity, neutrophil extracellular traps (NETs) play a crucial role in the initiation and progression of late-onset periodontitis. NETs are generated and released by neutrophils stimulated by various irritants, such as pathogens, host-derived mediators, and drugs. Chromatin and proteins are the main components of NETs. Depending on the characteristics of the processes, three main pathways of NET formation have been described. NETs can trap and kill pathogens by increased expression of antibacterial components and identifying and trapping bacteria to restrict their spread. Moreover, NETs can promote and reduce inflammation, inflicting injuries on the tissues during the pro-inflammation process. During their long-term encounter with NETs, periodontal bacteria have developed various mechanisms, including breaking down DNA of NETs, degrading antibacterial proteins, and impacting NET levels in the pocket environment to resist the antibacterial function of NETs. In addition, periodontal pathogens can secrete pro-inflammatory factors to perpetuate the inflammatory environment and a friendly growth environment, which are responsible for the progressive tissue damage. By learning the strategies of pathogens, regulating the periodontal concentration of NETs becomes possible. Some practical ways to treat late-onset periodontitis are reducing the concentration of NETs, administering anti-inflammatory therapy, and prescribing broad-spectrum and specific antibacterial agents. This review mainly focuses on the mechanism of NETs, pathogenesis of periodontitis, and potential therapeutic approaches based on interactions between NETs and periodontal pathogens.

Osteoblast lineage cells and periodontal ligament fibroblasts regulate orthodontic tooth movement that is dependent on Nuclear Factor-kappa B (NF-kB) activation.

OBJECTIVES: To investigate the role of NF-κB in osteoblast lineage cells and periodontal ligament (PDL) fibroblasts during orthodontic tooth movement (OTM). MATERIALS AND METHODS: Transgenic mice that expressed a dominant negative mutant of the inhibitor of kB kinase (IKK-DN) with lineage specific expression in osteoblastic cells and PDL fibroblasts driven by a response element in the collagen1α1 promoter and matched wild-type (WT) mice were examined. A 10-12 g force was applied by a NiTi coil and maintained for 5 or 12 days. OTM distance, PDL width, and bone volume fraction were measured using micro computed tomography. Osteoclast numbers were counted in tartrate-resistant acid phosphatase-stained sections. Activation of nuclear factor kappa B (NF-kB) was assessed by nuclear localization of p65, and the receptor activator of nuclear factor-κB ligand (RANKL) was measured by immunofluorescence and compared to control specimens with no orthodontic force. RESULTS: OTM-induced NF-kB activation (p65 nuclear localization) in WT mice was largely blocked in transgenic (TG) mice. OTM was significantly reduced in the TG mice compared to WT mice along with reduced osteoclastogenesis, narrower PDL width, higher bone volume fraction, and reduced RANKL expression. CONCLUSIONS: Osteoblast lineage cells and PDL fibroblasts are key contributors to alveolar bone remodeling in OTM through IKKß dependent NF-κB activation.

[Optimization of the formulation of ranolazine hydrochloride sustained-release tablet and its pharmacokinetics in dogs].

Ranolazine hydrochloride sustained-release tablet (RH-ST) was prepared and its release behavior in vitro was studied. The pharmacokinetic characteristics and bioavailability in six Beagle dogs after oral administration of RH-ST and ranolazine hydrochloride common tablets (RH-CT) as reference were compared. Three kinds of matrix, hydroxypropylmethylcellulose (HPMC K4M), ethylcellulose (EC 100cp) and acrylic resins (Eudragit RL100) were selected as functional excipients to keep ranolazine hydrochloride (RH) release for 12 hours. Through orthogonal designs, the polymers were quantified and the optimized cumulative release profile was obtained. The single oral dose of RH-ST 500 mg and RH-CT 333.3 mg was given to six dogs using a two way crossover design. Plasma levels were determined by LC-MS and the absorption fractions were calculated according to Loo-Riegelman formula. The steady-state concentration of RH in plasma of six dogs and its pharmacokinetics behaviors after continuous oral administration of RH-ST and RH-CT at different time intervals were studied by LC-MS. The steady-state pharmacokinetic parameters were computed by software program BAPP2.0. With the increase of the amount of the matrix, the drug release was decreased. The most important factor influencing drug release is the quantity of HPMC K4M. Drug release within the period (from 0 h to 12 h) fitted well into Higuchi model. The correlation coefficient (r) between the dissolution in vitro in release media of the distilled water and the absorptin fraction in vivo was 0.9550. To compare with RH-CT, RH-ST in vivo has a steady and slow release behavior, Tmax was obviously delayed (3.00 +/- 0.50) h and the relative bioavailability was over 80 percentage. The combined use of multiple polymers can decrease the tablet weight effectively, and the drug release rate can be decreased both in vitro and in vivo.

Low field nuclear magnetic sensing technology based on hydrogel-coated superparamagnetic particles.

Based on superparamagnetic nanoparticles, a responsive polyacrylamide hydrogel self-assembled by nucleic acid hairpin hybridization chain reaction was designed, and a universal low field nuclear magnetic resonance sensing platform was successfully constructed. As the target was gradually added, the hydrogel coating on the surface of the magnetic nanoparticle was opened layer by layer through binding with the aptamer, which specifically bonded thereto, causing different degrees of exposure of the magnetic nanoparticle, resulting in changes of low field nuclear magnetic resonance signals. This method was originally applied to the rapid detection of adenosine triphosphate (ATP), and the versatility of the method was verified using polychlorinated biphenyl 77 (PCB77). This method had the advantage of being fast, convenient, and low cost, and it can be easily operated with high repeatability. This universal method can detect a variety of targets by replacing aptamers and may be useful in controlling food quality and for rapidly detecting cancer cells in vitro.