SNARE proteins are required for macroautophagy.

Macroautophagy mediates the degradation of long-lived proteins and organelles via the de novo formation of double-membrane autophagosomes that sequester cytoplasm and deliver it to the vacuole/lysosome; however, relatively little is known about autophagosome biogenesis. Atg8, a phosphatidylethanolamine-conjugated protein, was previously proposed to function in autophagosome membrane expansion, based on the observation that it mediates liposome tethering and hemifusion in vitro. We show here that with physiological concentrations of phosphatidylethanolamine, Atg8 does not act as a fusogen. Rather, we provide evidence for the involvement of exocytic Q/t-SNAREs in autophagosome formation, acting in the recruitment of key autophagy components to the site of autophagosome formation, and in regulating the organization of Atg9 into tubulovesicular clusters. Additionally, we found that the endosomal Q/t-SNARE Tlg2 and the R/v-SNAREs Sec22 and Ykt6 interact with Sso1-Sec9, and are required for normal Atg9 transport. Thus, multiple SNARE-mediated fusion events are likely to be involved in autophagosome biogenesis.

Electro-thermal actuation in percolative ferroelectric polymer nanocomposites.

The interconversion between electrical and mechanical energies is pivotal to ferroelectrics to enable their applications in transducers, actuators and sensors. Ferroelectric polymers exhibit a giant electric-field-induced strain (>4.0%), markedly exceeding the actuation strain (≤1.7%) of piezoelectric ceramics and crystals. However, their normalized elastic energy densities remain orders of magnitude smaller than those of piezoelectric ceramics and crystals, severely limiting their practical applications in soft actuators. Here we report the use of electro-thermally induced ferroelectric phase transition in percolative ferroelectric polymer nanocomposites to achieve high strain performance in electric-field-driven actuation materials. We demonstrate a strain of over 8% and an output mechanical energy density of 11.3 J cm-3 at an electric field of 40 MV m-1 in the composite, outperforming the benchmark relaxor single-crystal ferroelectrics. This approach overcomes the trade-off between mechanical modulus and electro-strains in conventional piezoelectric polymer composites and opens up an avenue for high-performance ferroelectric actuators.

Comparison of Clinical Results of Crescent-Shaped Expanded Polytetrafluoroethylene (e-PTFE) and Granulated Rib Cartilage for Filling The Nasal Base to correct Midface Depressions.

Objective: The center of the face plays an important role in the fullness of our facial contours, however, sunken center of the face is more common in Asians than in Europeans and Americans. Expanded polytetrafluoroethylene (PTFE) and rib cartilage are commonly used to fill the nasal base to improve the hollowing of the center of the face. This study aimed to compare the efficacy and safety of crescent-shaped expanded polytetrafluoroethylene (e-PTFE) with granulated rib cartilage for nasal base filling to treat midface depressions. Methods: Fifty-one patients with mild to moderate midface depression and normal occlusion admitted to our department from June 2017 to August 2020 were selected. Comprehensive rhinoplasty was performed, which included nasal base filling using crescentic e-PTFE or granulated rib cartilage. They are all women, with an average age of 27.4 years. The e-PTFE group (group A) had 27 cases, while the granulated rib cartilage group (group B) had 24. Changes in two face parameters, the wing ear line and facial convexity, were measured and recorded based on preoperative and postoperative photographs of the patients and using 3D imaging technology. Postoperative complications and satisfaction were assessed by questionnaires to compare the two surgical approaches' differences, advantages, and disadvantages. Results: Postoperative midface depression improved significantly in 51 patients. Most of the patients who underwent both procedures showed significant improvement in the wing ear line and facial convexity. The 3D imaging has also helped us to more objectively assess the changes in midface concavity. Some patients experienced acute discomfort, such as foreign body sensation and stiffness in the surgical area, for the first three months after nasal base filler surgery. Still, these symptoms resolved on their own within six months. Most patients (92.6% in group A and 91.6% in group B) felt that they had natural facial expressions and were satisfied with the filler results. Conclusion: The use of crescentic e-PTFE and granular rib cartilage to fill the nasal base is easy to operate and has a quick postoperative recovery, allowing for good postoperative results. However, after some of the granular rib cartilage filling treatments, the height of the nasal base was lowered, which may be connected to its limited structural support, ease of displacement, and resorption. Crescentic e-PTFE is superior to granular rib cartilage in terms of both morphology and mechanical support. The crescentic e-PTFE filling method provides rapid postoperative recovery and good shape maintenance, but local stiffness is more pronounced than in the granular rib cartilage group. This may help the plastic surgeon's choice of surgical procedure.

The Effects of Endoplasmic Reticulum Stress via Intratracheal Instillation of Water-Soluble Acrylic Acid Polymer on the Lungs of Rats.

Polyacrylic acid (PAA), an organic chemical, has been used as an intermediate in the manufacture of pharmaceuticals and cosmetics. It has been suggested recently that PAA has a high pulmonary inflammatory and fibrotic potential. Although endoplasmic reticulum stress is induced by various external and intracellular stimuli, there have been no reports examining the relationship between PAA-induced lung injury and endoplasmic reticulum stress. F344 rats were intratracheally instilled with dispersed PAA (molecular weight: 269,000) at low (0.5 mg/mL) and high (2.5 mg/mL) doses, and they were sacrificed at 3 days, 1 week, 1 month, 3 months and 6 months after exposure. PAA caused extensive inflammation and fibrotic changes in the lungs' histopathology over a month following instillation. Compared to the control group, the mRNA levels of endoplasmic reticulum stress markers Bip and Chop in BALF were significantly increased in the exposure group. In fluorescent immunostaining, both Bip and Chop exhibited co-localization with macrophages. Intratracheal instillation of PAA induced neutrophil inflammation and fibrosis in the rat lung, suggesting that PAA with molecular weight 269,000 may lead to pulmonary disorder. Furthermore, the presence of endoplasmic reticulum stress in macrophages was suggested to be involved in PAA-induced lung injury.

Hierarchically Designed Biodegradable Polylactide Particles with Unprecedented Piezocatalytic Activity and Biosafety for Tooth Whitening.

At-home tooth whitening solutions with good efficacy and biosafety are highly desirable to meet the ever-growing demand for aesthetic dentistry. As a promising alternative to the classic peroxide bleaching that may damage tooth enamel and gums, piezocatalysis has been recently proposed to realize non-destructive whitening by toothbrushing with piezoelectrical particles. However, traditional particles either pose potential threats to human health or exhibit low piezoresponse to weak mechanical stimuli in the toothbrushing. Here, biocompatible and biodegradable polylactide particles constructed from interlocking crystalline lamellae have been hierarchically designed as next-generation whitening materials with ultra-high piezocatalytic activity and biosafety. By simultaneously controlling the chain conformation within lamellae and the porosity of such unique lamellae network at the nano- and microscales, the particles possessing unprecedented piezoelectricity have been successfully prepared due to the markedly increased dipole alignment, mechanical deformability, and specific surface area. The piezoelectric output can reach as high as 18.8 V, nearly 50 times higher than that of common solid polylactide particles. Consequently, their piezocatalytic effect can be readily activated by a toothbrush to rapidly clean the teeth stained with black tea and coffee, without causing detectable enamel damage. Furthermore, these particles have no cytotoxicity. This work presents a paradigm for achieving high piezoelectric activity in polylactide, which enables its practical application in tooth whitening.

Effect of Plasticization on Stretching Stability of Poly(Vinyl Alcohol) Films: A Case Study Using Glycerol and Water.

Adding small molecular plasticizers is the most common route to tailor the stretchability of poly(vinyl alcohol) (PVA). However, how the plasticization along with the nature of the plasticizer governs the structural homogeneity during stretching remains an open question to answer. Herein, two representative plasticizers, glycerol (GLY) and water, are chosen to endow the PVA films with ductility. It is found that large strain cavitations cause obvious stress whitening in the PVA/H2 O films; on the contrary, most of the PVA/GLY films maintain transparent undergoing tensile deformation. Through a combination of experimental inspections and molecular dynamic simulation, it is revealed that partial water molecules that behave as free water will aggregate into microdomains, which serve as mechanical defects responsible for yielding voids. Whereas, the GLY plasticizer homogeneously disperses at a molecular level and interacts with PVA chains through strong hydrogen bonds. More interestingly, it is illustrated that the dispersion and bound states of plasticizers are closely related to the mechanical character of the plasticized PVA films. These findings offer new insight into the working mechanism of plasticization on the structural stability during stretching, and guide the design of PVA/plasticizer system to obtain excellent comprehensive mechanics.

A novel polymer enabled by polymerized small molecule strategy for tumor photothermal and photodynamic therapy.

Photothermal therapy (PTT) and photodynamic therapy (PDT) are effective method for tumor treatment. However, the limited variety and quantity of photothermal agents (PTAs) and photosensitizer (PSs) are still major challenges. Moreover, the cell apoptosis mechanism induced by PDT and PTT is still elusive. A fused-ring small molecule acceptor-donor acceptor' donor-acceptor (A-DA'D-A) type of Y5 (Scheme 1) has a narrow band-gap and strong light absorption. Herein, we used Y5 to polymerize with thiophene unit to obtain polymer PYT based on polymerized small molecule strategy, and PYT nanoparticles (PYT NPs) was prepared via one-step nanoprecipitation strategy with DSPE-PEG2000. PYT NPs had excellent biocompatibility, good photostability, high photothermal conversion efficiency (67%) and reactive oxygen species (ROS) production capacity under 808 nm laser irradiation (PYT NPs + NIR). In vitro and in vivo experiments revealed that PYT NPs + NIR had the ability to completely ablate tumor cells. It was demonstrated that cell apoptosis induced by PYT NPs + NIR was closely related to mitochondrial damage. This study provides valuable guidance for constructing high-performance organic PTAs and PSs for tumor treatment. Scheme 1 PYT enabled by polymerized small molecule strategy for tumor photothermal and photodynamic therapy.

Association between oral infections, triglyceride-glucose index, and in-stent restenosis.

OBJECTIVES: To investigate oral infections in patients suffering in-stent restenosis (ISR) and non-ISR and analyze the possible correlation between the oral infection and triglyceride-glucose (TyG) index, a clinical surrogate indicator of insulin resistance (IR). MATERIALS AND METHODS: A cross-sectional design was used, in which 586 patients with acute coronary syndrome who underwent coronary angiography 6-24 months after coronary stent implantation were recruited. The modified total dental index (TDI) was used to evaluate the status of oral inflammation. RESULTS: In both univariate analyses, TDI scores [3 (1.5, 4.5) vs. 2.5 (1.5, 4.0), p < 0.01] and a multivariate regression model (OR = 1.202, 95% CI = 1.085-1.333, p < 0.01), the TDI significantly correlated with ISR. The TyG index was positively associated with ISR (OR = 1.766, 95% CI = 1.055-2.957, p < 0.05). Correlation analysis showed that TDI was positively correlated with TyG index (r = 0.190, p < 0.01). Using linear regression analysis, higher TDI scores were significantly associated with IR (95% CI = 0.029-0.063, p < 0.01). CONCLUSIONS: Oral infections and TyG index were independently and positively correlated with ISR in patients with acute coronary syndrome. Oral inflammatory burden assessed by TDI score was associated with IR.

Adjustable Removable Traction Appliance With Surgically Assisted Eruption for Impacted Maxillary Central Incisors.

Context: Impacted maxillary central incisors (MCIs) can seriously affect children's appearance, verbal abilities, and maxillofacial development. Clinically, a combination of surgically assisted eruption and orthodontic traction is the treatment modality most acceptable to dentists and children's families. However, previously used traction methods have been complex and required a long treatment time. Objective: The study intended to evaluate the clinical effects of the use of the research team's adjustable removable traction appliance combined with a surgically assisted eruption of impacted MCIs. Design: The research team performed a controlled prospective study. Setting: The study took place at Department of Orthodontics, Hefei Stomatological, Hospital. Participants: 10 patients with impacted MCIs, aged 7-10 years, who had visited the hospital between September 2017 and December 2018. Intervention: The research team assigned the impacted MCIs to the intervent ion group and contral ateral normal MCIs to thecontrol group. For the intervention group, the research team performed a surgical eruption and inserted the adjustable removable traction appliance. The control group received no treatments. Outcome Measures: Postintervention, the research team determined the mobility of both groups' teeth. At baseline and immediately postintervention for both groups, the team performed cone-beam computed tomography (CBCT) and measured root length, apical-foramen width, volume, surface area, and root-canal wall thickness for the labial and palatal sides. For both groups, after the intervention group's treatments, the team: (1) performed electric pulp testing and periodontal probing on the participants' teeth; (2) measured and documented pulp vitality, gingival index, periodontal probing depth, and gingival height (GH)for the labial and palatal sides; and (3) measured labial-and-palatal, alveolar bone level and alveolar bone thickness. Results: At baseline, the intervention group showed delayed root development, and that group's root length was significantly shorter (P < .05) and apical-foramen width (P < .05) was significantly greater than those of the control group. The intervention group's treatment success rate was 100%. And the intervention group did not have any adverse reactions, such as tooth loosening, gingival redness and swelling, or bleeding. Postintervention, the intervention group's labial GH was significantly higher than that of the control group, at 10.58 ± 0.45 mm and 9.47 ± 0.31 mm, respectively (P = .000). The increase in the intervention group's root length postintervention was significantly greater than that of the control group, at 2.80 ± 1.09 mm and 1.84 ± 0.97 mm, respectively (P < .05). The intervention group also had significantly greater decrease in the apical-foramen width than the control group did, at 1.79 ± 0.59 mm and 0.96 ± 0.40 mm, respectively (P < .05). At the end of traction, the intervention group had significantly higher labial-and-palatal alveolar-bone levels, at 1.77 ± 0.37 mm and 1.23 ± 0.21 mm, respectively, than the control group did, at 1.25 ± 0.26 mm (P = .002) and 1.05 ± 0.15 mm (P = .036), respectively. The labial alveolar-bone thickness in the intervention group was thinner than that of the control group, at 1.49 ± 0.31 mm and 1.80 ± 0.11 mm, respectively (P = .008). The volume and surface area (P < .01) of the intervention group's impacted teeth had increased significantly postintervention (both P < .01), but both were significantly smaller than those of the control group, both at baseline and postintervention. Conclusions: An adjustable removable traction appliance combined with a surgically assisted eruption can be a reliable treatment for impacted MCIs and can provide root development and a good periodontal-pulp condition postintervention.

A novel nano material for anti-cerebral ischaemia: preparation and application of borneol angelica polysaccharide liposomes.

OBJECTIVE: To investigate the preparation of novel nanoliposomes (Borneol Angelica Polysaccharide Liposomes, BAPL) for anti-cerebral ischaemia and verify its curative effects and mechanism. METHODS: By applying a uniform experiment design to investigate the fitting combination of BAPL. Encapsulation Efficiency Evaluation of BAPL Preparation; Particle Size and Surface Potential Evaluation of BAPL Biological activity; Cerebral ischaemia models of rats Evaluation of BAPL curative effects and mechanism. RESULTS: (1) The fitting combination of lecithin, Cholesterol, AP mass and the borneol mass was 60 mg, 60 mg, 45 mg and 5 mg. the highest encapsulation efficiency was 80.4%, the particle size was 179.1 nm, and the surface zeta potential was -17.2 mV. It conforms to the nano-material standards. (2) The results of animal experiments show that: In the BAPL group, the infarct volume of TTC staining was significantly decreased, and the expression levels of NF-κBp65, TLR-4, IL-8, IL-6, IL-1ß in brain tissue were significantly decreased, while the expression levels of ZO-1, ZO-2, IL-10 were significantly increased after cerebral ischaemia-reperfusion. CONCLUSION: BAPL is a novel nano and effective material for anti-cerebral ischaemia.

Effect of Cross-Linking Density on Non-Linear Viscoelasticity of Vulcanized SBR: A MD Simulation and Experimental Study.

In recent years, there has been a growing interest in changes in dynamic mechanical properties of mixed rubber during dynamic shear, yet the influence of vulcanized characteristics on the dynamic shear behavior of vulcanized rubber, particularly the effect of cross-linking density, has received little attention. This study focuses on styrene-butadiene rubber (SBR) and aims to investigate the impact of different cross-linking densities (Dc) on dynamic shear behavior using molecular dynamics (MD) simulations. The results reveal a remarkable Payne effect, where the storage modulus experiences a significant drop when the strain amplitude (γ0) exceeds 0.1, which can be attributed to the fracture of the polymer bond and the decrease in the molecular chain's flexibility. The influence of various Dc values mainly resides at the level of molecular aggregation in the system, where higher Dc values impede molecular chain motion and lead to an increase in the storage modulus of SBR. The MD simulation results are verified through comparisons with existing literature.

How does alendronate affect orthodontic tooth movement in osteogenesis imperfecta: an in vivo study on a mice model.

OBJECTIVES: The purpose of this study was to evaluate the effects of alendronate on orthodontic tooth movement (OTM) and bone modelling/remodelling in an osteogenesis imperfecta (OI) mice model. MATERIALS AND METHODS: Ten-week-old male and female OI mice (Col1a2oim, n = 32) were divided into four groups: 1. Alendronate male (AM, n = 8), 2. Alendronate female (AF, n = 8), 3. saline male (SM, n = 8), and 4. saline female (SF, n = 8). The mice in all four groups received either Alendronate (0.05 mg/kg) or vehicle (saline 0.05 mg/kg) subcutaneously for 2 weeks prior to the placement of orthodontic spring. A nickel-titanium spring applying 3-5 cN of force was used to perform the OTM for 1 week. After 7 days of OTM, the OI mice were euthanized with CO2 inhalation and microfocus computed tomography and histological analyses were performed. RESULTS: AM and AF mice showed a significant decrease (P < 0.05) in the rate of OTM compared with SM and SF mice, respectively. In addition, AM and AF mice showed a significant increase (P < 0.05) in the bone volume fraction (BVF) and tissue density (TD) compared with SM and SF mice. Histological analysis of haematoxylin-eosin staining revealed a hyalinization zone in AM and AF mice compared with SM and SF mice. Furthermore, tartrate-resistant acid phosphatase staining indicated decreased number of osteoclasts in AM and AF mice compared with SM and SF mice. Picrosirius red staining showed, Alendronate treatment led to thick uniform and smooth morphology of collagen fibres as compared with saline group. Similarly, second harmony generation images also revealed thicker collagen fibres at the periodontal ligament (PDL)-cementum entheses and PDL-alveolar bone entheses in AM and AF mice compared with SM and SF mice. CONCLUSIONS: Alendronate led to a decrease in the rate of OTM, increase in BVF and TD, decrease in the number of osteoclasts, and smooth and thick collagen fibres compared with saline in both male and female OI mice.

The link between different infection forms of Porphyromonas gingivalis and acute myocardial infarction: a cross-sectional study.

BACKGROUND: Porphyromonas gingivalis (Pg) is one of the keystone pathogens involved in periodontitis. The present study aimed to observe the relationship among different infection forms of Pg, systemic inflammation, and acute myocardial infarction (AMI). METHODS: A total of 382 patients diagnosed with AMI and 78 patients without coronary heart disease (CHD) were included in the study. DNA from exfoliated oral cells, circulating cell-free DNA (cfDNA), and genomic DNA (gDNA) from blood samples were extracted. The qPCR method was employed to detect Pg infection. Clinical characteristics, inflammatory parameters, and severity of coronary artery lesions of the patients were analyzed and compared. RESULTS: Both the oral colonization and distant invasion of Pg correlated positively with systemic inflammation. Multivariate logistic regression analysis suggested that Pg positivity in gDNA was correlated with the risk of AMI [Model 1 (odds ratio (OR) = 1.917, 95% confidence interval (CI) 1.108-3.315), Model 2 (OR = 1.863, 95% CI 1.064-3.262), and Model 3 (OR = 1.853, 95% CI 1.042-3.295); p < 0.05]. Pg positivity in cfDNA and gDNA was related to the severity of coronary artery lesions (cfDNA-positive cases, adjusted OR = 1.577, p < 0.05; gDNA-positive cases, adjusted OR = 1.976, p < 0.01). CONCLUSIONS: The distant invasion and colonization of Pg were the risk factors of AMI. They also affected the severity of CHD, indicating that periodontitis severity and distant invasion of periodontal pathogens were related to CHD. The presence of Pg was likely able to drive systemic inflammation, suggesting that there was an inflammatory relationship between periodontitis and AMI.

Compritol solid lipid nanoparticle formulations enhance the protective effect of betulinic acid derivatives in human Müller cells against oxidative injury.

Müller cells maintain homeostatic functions in the retina. Their dysfunction leads to irreversible retinal diseases. Oxidative injury is a leading cause of retinal cytotoxicity. Our previous studies reported several betulinic acid (BA) derivatives can protect Müller cells from oxidative injury but achieving pharmacologically effective concentrations in the Müller cells could be a limitation. To optimise cellular delivery, we encapsulated the BA analogues H3, H5 and H7 into the clinically approved Compritol 888 and HD5 ATO solid lipid nanoparticles (SLNs) using the micro-emulsion method. The cytoprotective effects of these SLN-formulations were determined in human MIO-M1 cells. We found cytoprotection by H3 and H5 SLN-formulations was significantly enhanced, which was evident at concentrations much lower than those required with the free agents. Both SLN-formulations prolonged the duration of action of these agents. The most effective agent H5 delivered in 888 ATO SLNs attenuated glutamate-induced ROS formation and the associated necrosis in MIO-M1 cells. Overall, SLNs have emerged as promising delivery carriers for BA derivatives enhancing their protective effects against oxidative injury in human Müller cells. Our study is the first to show SLNs can be a viable route to delivery agents with improved efficacy and stability into human Müller cells favoring the treatment/prevention of retinal diseases.

Recent advances in enterovirus A71 pathogenesis: a focus on fatal human enterovirus A71 infection.

Enterovirus A71 (EV-A71) is one of the major pathogens responsible for hand, foot, and mouth disease (HFMD). Many HFMD outbreaks have been reported throughout the world in the past decades. Compared with other viruses, EV-A71 infection is more frequently associated with severe neurological complications and even death in children. EV-A71 can also infect adults and cause severe complications and death, although such cases are very uncommon. Although fatal cases of EV-A71 infection have been reported, the underlying mechanisms of EV-A71 infection, especially the mode of viral spread into the central nervous system (CNS) and mechanisms of pulmonary edema, which is considered to be the direct cause of death, have not yet been fully clarified, and more studies are needed. Here, we first summarize the pathological findings in various systems of patients with fatal EV-A71 infections, focussing in detail on gross changes, histopathological examination, tissue distribution of viral antigens and nucleic acids, systemic inflammatory cell infiltration, and tissue distribution of viral receptors and their co-localization with viral antigens. We then present our conclusions about viral dissemination, neuropathogenesis, and the mechanism of pulmonary edema in EV-A71 infection, based on pathological findings.

Inflammogenic effect of polyacrylic acid in rat lung following intratracheal instillation.

BACKGROUND: Some organic chemicals are known to cause allergic disorders such as bronchial asthma and hypersensitivity pneumonitis, and it has been considered that they do not cause irreversible pulmonary fibrosis. It has recently been reported, however, that cross-linked acrylic acid-based polymer, an organic chemical, might cause serious interstitial lung diseases, including pulmonary fibrosis. We investigated whether or not intratracheal instillation exposure to cross-linked polyacrylic acid (CL-PAA) can cause lung disorder in rats. METHODS: Male F344 rats were intratracheally instilled with dispersed CL-PAA at low (0.2 mg/rat) and high (1.0 mg/rat) doses, and were sacrificed at 3 days, 1 week, 1 month, 3 months and 6 months after exposure to examine inflammatory and fibrotic responses and related gene expressions in the lungs. Rat lungs exposed to crystalline silica, asbestos (chrysotile), and NiO and CeO2 nanoparticles were used as comparators. RESULTS: Persistent increases in total cell count, neutrophil count and neutrophil percentage, and in the concentration of the cytokine-induced neutrophil chemoattractant (CINC)-1, CINC-2 and C-X-C motif chemokine 5 (CXCL5), which correlated with lung tissue gene expression, were observed in bronchoalveolar lavage fluid (BALF) from 3 days until at least 1 month following CL-PAA intratracheal instillation. Persistent increases in heme oxygenase-1 (HO-1) in the lung tissue were also observed from 3 days to 6 months after exposure. Histopathological findings of the lungs demonstrated that extensive inflammation at 3 days was greater than that in exposure to silica, NiO nanoparticles and CeO2 nanoparticles, and equal to or greater than that in asbestos (chrysotile) exposure, and the inflammation continued until 1 month. Fibrotic changes also progressed after 1 month postexposure. CONCLUSION: Our results suggested that CL-PAA potentially causes strong neutrophil inflammation in the rat and human lung.

Environmentally relevant concentrations of microplastics modulated the immune response and swimming activity, and impaired the development of marine medaka Oryzias melastigma larvae.

Microplastics (MPs), due to their impacts on the ecosystem and their integration into the food web either through trophic transfer or ingestion directly from the ambient environment, are an emerging class of environmental contaminants posing a great threat to marine organisms. Most reports on the toxic effects of MPs exclusively focus on bioaccumulation, oxidative stress, pathological damage, and metabolic disturbance in fish. However, the collected information on fish immunity in response to MPs is poorly defined. In particular, little is known regarding mucosal immunity and the role of mucins. In this study, marine medaka (Oryzias melastigma) larvae were exposed to 6.0 µm beads of polystyrene microplastics (PS-MPs) at three environmentally relevant concentrations (102 particles/L, 104 particles/L, and 106 particles/L) for 14 days. The experiment was carried out to explore the developmental and behavioural indices, the transcriptional profiles of mucins, pro-inflammatory, immune, metabolism and antioxidant responses related genes, as well as the accumulation of PS-MPs in larvae. The results revealed that PS-MPs were observed in the gastrointestinal tract, with a concentration- and exposure time-dependent manner. No significant difference in the larval mortality was found between the treatment groups and the control, whereas the body length of larvae demonstrated a significant reduction at 106 particles/L on 14 days post-hatching. The swimming behaviour of the larvae became hyperactive under exposure to 104 and 106 particles/L PS-MPs. In addition, PS-MP exposure significantly up-regulated the mucin gene transcriptional levels of muc7-like and muc13-like, however down-regulated the mucin gene expression levels of heg1, muc2, muc5AC-like and muc13. The immune- and inflammation and metabolism-relevant genes (jak, stat-3, il-6, il-1ß, tnf-а, ccl-11, nf-κb, and sod) were significantly induced by PS-MPs at 104 and 106 particles/L compared to the control. Taken together, this study suggests that PS-MPs induced inflammation response and might obstruct the immune functions and retarded the growth of the marine medaka larvae even at environmentally relevant concentrations.

Effect of Different Molecular Weights of Polyacrylic Acid on Rat Lung Following Intratracheal Instillation.

BACKGROUND: We conducted intratracheal instillations of different molecular weights of polyacrylic acid (PAA) into rats in order to examine what kinds of physicochemical characteristics of acrylic acid-based polymer affect responses in the lung. METHODS: F344 rats were intratracheally exposed to a high molecular weight (HMW) of 598 thousand g/mol or a low molecular weight (LMW) of 30.9 thousand g/mol PAA at low and high doses. Rats were sacrificed at 3 days, 1 week, 1 month, 3 months and 6 months post exposure. RESULTS: HMW PAA caused persistent increases in neutrophil influx, cytokine-induced neutrophil chemoattractants (CINC) in the bronchoalveolar lavage fluid (BALF), and heme oxygenase-1 (HO-1) in the lung tissue from 3 days to 3 months and 6 months following instillation. On the other hand, LMW PAA caused only transient increases in neutrophil influx, CINC in BALF, and HO-1 in the lung tissue from 3 days to up to 1 week or 1 month following instillation. Histopathological findings of the lungs demonstrated that the extensive inflammation and fibrotic changes caused by the HMW PAA was greater than that in exposure to the LMW PAA during the observation period. CONCLUSION: HMW PAA induced persistence of lung disorder, suggesting that molecular weight is a physicochemical characteristic of PAA-induced lung disorder.

Artemisinin Cocrystals for Bioavailability Enhancement. Part 1: Formulation Design and Role of the Polymeric Excipient.

Artemisinin (ART) is a most promising antimalarial agent, which is both effective and well tolerated in patients, though it has therapeutic limitations due to its low solubility, bioavailability, and short half-life. The objective of this work was to explore the possibility of formulating ART cocrystals, i.e., artemisinin-orcinol (ART-ORC) and artemisinin-resorcinol (ART2-RES), as oral dosage forms to deliver ART molecules for bioavailability enhancement. This is the first part of the study, aiming to develop a simple and effective formulation, which can then be tested on an appropriate animal model (i.e., mouse selected for in vivo study) to evaluate their preclinical pharmacokinetics for further development. In the current work, the physicochemical properties (i.e., solubility and dissolution rate) of ART cocrystals were measured to collect information necessary for the formulation development strategy. It was found that the ART solubility can be increased significantly by its cocrystals, i.e., 26-fold by ART-ORC and 21-fold by ART2-RES, respectively. Screening a set of polymers widely used in pharmaceutical products, including poly(vinylpyrrolidone), hydroxypropyl methylcellulose, and hydroxypropyl methylcellulose acetate succinate, based on the powder dissolution performance parameter analysis, revealed that poly(vinylpyrrolidone)/vinyl acetate (PVP-VA) was the most effective crystallization inhibitor. The optimal concentration of PVP-VA at 0.05 mg/mL for the formulation was then determined by a dissolution/permeability method, which represented a simplified permeation model to simultaneously evaluate the effects of a crystallization inhibitor on the dissolution and permeation performance of ART cocrystals. Furthermore, experiments, including surface dissolution of single ART cocrystals monitored by Raman spectroscopy, scanning electron microscopy and diffusion properties of ART in solution measured by 1H and diffusion-ordered spectroscopy nuclear magnetic resonance spectroscopy, provided insights into how the excipient affects the ART cocrystal dissolution performance and bioavailability.

Cloning and molecular characterization of Triticum aestivum ornithine amino transferase (TaOAT) encoding genes.

BACKGROUND: Ornithine aminotransferase (OAT, EC:2.6.1.13), alternatively known as ornithine delta aminotransferase (δOAT), is a pyridoxal phosphate (PLP)-dependent enzyme involved in the conversion of ornithine into glutamyl-5-semi-aldehyde (GSA) and vice versa. Up till now, there has been no study on OAT in wheat despite the success of its isolation from rice, maize, and sorghum. This study focuses on identification and molecular characterization of OAT in wheat. RESULTS: In total, three homeologous OAT genes in wheat genome were found on chromosome group 5, named as TaOAT-5AL, TaOAT-5BL, and TaOAT-5DL. Sequence alignment between gDNA and its corresponding cDNA obtained a total of ten exons and nine introns. A phylogenetic tree was constructed and results indicated that OATs shared highly conserved domains between monocots and eudicots, which was further illustrated by using WebLogo to generate a sequence logo. Further subcellular localization analysis indicated that they functioned in mitochondria. Protein-protein interactions supported their role in proline biosynthesis through interactions with genes, such as delta 1-pyrroline-5-carboxylate synthetase (P5CS) and pyrroline-5-carboxylate reductase (P5CR), involved in the proline metabolic pathway. Promoter analysis exposed the presence of several stress responsive elements, implying their involvement in stress regulation. Expression profiling illustrated that TaOAT was highly induced in the wheat plants exposed to drought or salt stress condition. Upregulated expression of TaOATs was observed in stamens and at the heading stage. A potential role of TaOAT genes during floret development was also revealed. Furthermore, the transgenic plants overexpressing TaOAT showed enhanced tolerance to drought stress by increasing proline accumulation. In addition, salt tolerance of the transgenic plants was also enhanced. CONCLUSION: TaOATs genes were involved in proline synthesis and nitrogen remobilization because they interacted with genes related to proline biosynthesis enzymes and arginine catabolism. In addition, TaOAT genes had a role in abiotic stress tolerance and a potential role in floret development. The results of this study may propose future research in the improvement of wheat resistance to abiotic stresses.