Inhibition of autophagy reduces the rate of fluoride-induced LS8 apoptosis via regulating ATG5 and ATG7.

Excessive fluoride affects ameloblast differentiation and tooth development. The fate of fluorinated ameloblasts is determined by multiple signaling pathways in response to a range of stimuli. Both autophagy and apoptosis are involved in the regulation of dental fluorosis as well as in protein synthesis and enamel mineralization. Emerging evidence suggests that autophagy and apoptosis are interconnected and that their interaction greatly influences cell death. However, the effect of autophagy on apoptosis in fluoride-treated ameloblasts is unclear. Here, we employed an in vitro cellular model of fluorosis in mouse ameloblast-like LS8 cells and induced autophagy using sodium fluoride (NaF). Our findings suggest that NaF treatment induces autophagy in LS8 cells, and ATG5 and ATG7 are important molecules involved in this process. We also showed that NaF treatment reduced cell viability in Atg5/7 siRNA and autophagy inhibitor-treated LS8 cells. More importantly, NaF-induced apoptosis can be reversed by inhibiting early stage of autophagy. In conclusion, our study shows that autophagy is closely related to dental fluorosis, and inhibition of autophagy, especially ATG5/7, reduces fluoride-induced cell death and apoptosis.

The Application of a Case-Based Social Media-Assisted Teaching Method in Cariology Education：Comparative Study.

BACKGROUND: Current cariology education based on the traditional teaching method faces a lot of challenges. Meanwhile, the COVID-19 pandemic caused an unprecedented disruption in medical education and health care systems worldwide. Innovation in the teaching mode of cariology education is required to change the situation. OBJECTIVE: The goal of the research was to evaluate the application effects of a case-based social media-assisted teaching method in cariology education. METHODS: Dental students of class 2019 were enrolled into the experimental group, while students of class 2018 served as control. A case-based social media-assisted teaching method was used in the experimental group, which included preclass activity via social media, additional discussion and practice process record in class, and questions and answers on the platform after class. The traditional teaching method, which consisted of conventional preparation before class, traditional lectures and demonstrations followed by students practice in class, and questions and answers step after class, was used in the control group. The teaching materials were the same in both groups. At the end of the program, students from both groups took cavity preparation skill evaluation tests. Questionnaires were tested on the case-based social media-assisted teaching group students anonymously. All data were analyzed using SPSS statistical software (version 22.0, IBM Corp). RESULTS: The mean student cavity preparation skill evaluation scores was 82.51 (SD 6.82) in the experimental group and 77.19 (SD 5.98) in the control group (P<.05). The questionnaire response rate was 100%. Of those, 94.3% (100/106) of the students recommended the case-based social media-assisted teaching method in cariology education. The majority of the participants agreed that it helped them memorize the theoretical knowledge of cariology, facilitated in-depth discussion, improved their enthusiasm and initiative in learning, and enhanced the relationship between teachers and students (104/106, 98.1%). They also recognized that the classroom atmosphere was active (94/106, 88.7%). CONCLUSIONS: The case-based social media-assisted teaching method was beneficial in terms of learning, as demonstrated by the statistically significant improvement of the cavity preparation skill evaluation scores and satisfaction from attending students. This method could be used to supplement the teaching of cariology.

Bio-based thermoplastic poly(butylene succinate-co-propylene succinate) copolyesters: effect of glycerol on thermal and mechanical properties.

Poly(butylene succinate-co-propylene succinate) (PBSPS) was polymerized using succinic acid, 1,4-butanediol, 1,3-propanediol, and glycerol (GC). The PBSPS copolyester with a BS/PS ratio of 7/3 has a low melting point (Tm, 80 °C) and crystallization temperature (Tc, 20 °C) in addition to excellent thermal stability with a thermal degradation temperature (Td) above 300 °C. Isodimorphism was observed for 30-50 mol% PS, lowering Tm and Tc. The featured crystalline lattices (021) and (110) of PBS at 2θ = 21.5° and 22.5° gradually disappeared with PS content greater than 50 mol% and transformed into a PPS crystalline lattice at 2θ = 22.3°. Young's modulus decreased with increasing PS content due to crystallinity loss. Wide-angle X-ray diffraction demonstrated that the chain movement regularity was affected by the GC content, reducing the crystallinity. The PBSPS copolyesters were elastic with 0.001 mol% GC but became rigid with GC content greater than 0.01 mol%. The chain conformation was flexible for 0.001-0.01 mol% GC and exhibited an irregular steric architecture for 0.02-0.03 mol% GC due to more GC acting as nodes. Thus, the thermal and mechanical properties of the synthesized bio-based PBSPS copolyesters can be controlled by adjusting the GC content; therefore, such copolyesters are suitable for medical support, coating, and phase-change material applications.

Aldose reductase mediates endothelial cell dysfunction induced by high uric acid concentrations.

BACKGROUND: Uric acid (UA) is an antioxidant found in human serum. However, high UA levels may also have pro-oxidant functions. According to previous research, aldose reductase (AR) plays a vital role in the oxidative stress-related complications of diabetes. We sought to determine the mechanism by which UA becomes deleterious at high concentrations as well as the effect of AR in this process. METHOD: Endothelial cells were divided into three groups cultured without UA or with 300 µM or 600 µM UA. The levels of total reactive oxygen species (ROS), of four ROS components, and of NO and NOX4 expression were measured. Changes in the above molecules were detected upon inhibiting NOX4 or AR, and serum H2O2 and vWF levels were measured in vivo. RESULTS: Increased AR expression in high UA-treated endothelial cells enhanced ROS production by activating NADPH oxidase. These effects were blocked by the AR inhibitor epalrestat. 300 µM UA decreased the levels of the three major reactive oxygen species (ROS) components: O2•-, •OH, and 1O2. However, when the UA concentration was increased, both O2•- levels and downstream H2O2 production significantly increased. Finally, an AR inhibitor reduced H2O2 production in hyperuricemic mice and protected endothelial cell function. CONCLUSIONS: Our findings indicate that inhibiting AR or degrading H2O2 could protect endothelial function and maintain the antioxidant activities of UA. These findings provide new insight into the role of UA in chronic kidney disease.

Mussel-inspired surface modification of magnetic@graphite nanosheets composite for efficient Candida rugosa lipase immobilization.

By the facile adhesion way, the novel composite complex by polydopamine (PDA) and magnetic graphite nanosheets (Fe3O4@GNSs) has been successfully synthesized. The resulting composite was characterized by means of scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectra, and Raman spectra, X-ray diffraction, X-ray photoelectron spectroscopy, and vibrating sample magnetometry. Meanwhile, the PDA functionalized Fe3O4@GNSs (Fe3O4@GNSs-PDA) was applied for Candida rugosa lipase (CRL) immobilization covalently without any toxic coupling agent. Combining the superior physical properties and chemical stability of Fe3O4@GNSs and the well biocompatibility, functional characteristics of PDA, the Fe3O4@GNSs-PDA composite displayed several advantages, including the high enzyme capacity, enzyme activity and stability and a decrease in enzyme loss. Our work demonstrated that the mussel-inspired Fe3O4@GNSs can be extended to many other applications such as biocatalytic, genetic and industrial.

A new sustainable filtration membrane extraction method based on nanoconfined liquid phase extraction: Determination of organochlorinated pesticides and pyrethroids in tea samples.

BACKGROUND: Pesticides are used in agricultural production for prevent and control crop diseases and pests, but it is easy to cause excessive pesticides residues in agricultural products, polluting the environment and endangering human health. Due to their unmatched and sustainable capabilities, nanoextraction procedures are becoming every day more important in Analytical Chemistry. In particular, nanoconfined liquid phase extraction has shown extraction capabilities toward polar, medium polar, and/or nonpolar substances, which can be easily modulated depending on the nanoconfined solvent used. Furthermore, this "green" technique showed excellent characteristics in terms of recoveries, extraction time (≤1 min), reliability, and versatility. (97) RESULTS: In this work, the advantages of this technique have been coupled with those of filtration membrane extraction, making use of carbon nanofibers (CnFs) growth on carbon microspheres (CµS). This substrate has been deposited on a filter, which combined with gas chromatographic mass spectrometry (GC-MS) analysis successfully employed for the nanoextraction of 30 pesticides (18 organochlorine and 12 pyrethroids) in tea samples. Under the optimized extraction conditions, the linear range with standard solutions was from 1 to 1000 ng mL-1 (R2 ≥ 0.99), the limit of detections in tea samples were in the range 0.56-17.98 µg kg-1. The accuracy of the developed method was evaluated by measuring the extraction recovery of the spiked tea samples, and recoveries between 74.41 % and 115.46 %. (119) SIGNIFICANCE: Considering the versatility of nanoconfined liquid phase extraction and the functionality of the filtration membrane extraction procedure, this new extraction method can be considered a powerful candidate for automatized high-throughput analyses of real samples. (34).

A Biodegradable Fiber Calcium Ion Sensor by Covalently Bonding Ionophores on Bioinert Nanoparticles.

Implantable sensors, especially ion sensors, facilitate the progress of scientific research and personalized healthcare. However, the permanent retention of implants induces health risks after sensors fulfill their mission of chronic sensing. Biodegradation is highly anticipated; while; biodegradable chemical sensors are rare due to concerns about the leakage of harmful active molecules after degradation, such as ionophores. Here, a novel biodegradable fiber calcium ion sensor is introduced, wherein ionophores are covalently bonded with bioinert nanoparticles to replace the classical ion-selective membrane. The fiber sensor demonstrates comparable sensing performance to classical ion sensors and good flexibility. It can monitor the fluctuations of Ca2+ in a 4-day lifespan in vivo and biodegrade in 4 weeks. Benefiting from the stable bonding between ionophores and nanoparticles, the biodegradable sensor exhibits a good biocompatibility after degradation. Moreover, this approach of bonding active molecules on bioinert nanoparticles can serve as an effective methodology for minimizing health concerns about biodegradable chemical sensors.

Prevalence of enteroviruses in children with and without hand, foot, and mouth disease in China.

BACKGROUND: To determine the prevalence of human enteroviruses (HEVs) among healthy children, their parents, and children with hand, foot, and mouth disease (HFMD). METHODS: We conducted a case-control study that included throat samples from 579 children with HFMD and from 254 healthy controls. Throat samples from 49 households (98 parents and 53 healthy children) were also analyzed. Phylogenetic analysis was carried out to study genetic relationships of EV71 strains. RESULTS: The HEV positive rate in HFMD patients was significantly higher than that in healthy controls (76.0% vs. 23.2%, P < 0.001). The EV71 (43.7% vs. 15.0%, P < 0.001), CVA16 (18.0% vs. 2.8%, P < 0.001), and CVA10 (5.7% vs. 0.8%, P = 0.001) serotypes were significantly overrepresented in HFMD patients in comparison to healthy children. Other HEV serotypes were detected with comparable frequency in cases and controls. The HEV positive rate in severe HFMD patients was significantly higher than that in mild group (82.1% vs. 73.8%, P = 0.04). The EV71 (55.0% vs. 39.7%, P = 0.001) and CVA16 (11. 9% vs. 20.0%, P = 0.024) positive rate differed significantly between severe and mild HFMD patients. Other HEV serotypes were detected with comparable frequency between severe and mild HFMD patients. Among 49 households, 22 households (44.9%) had at least 1 family member positive for HEV. Children had significantly higher HEV positive rate than adult (28.3% vs. 14.3%, P = 0.037). The HEV positive rate was similar between mothers and fathers (12.24% vs. 16.32%, P = 0.56). The VP1 sequences of EV71 from HFMD patients and healthy children were nearly identical and all were clustered in the same clade, C4a. CONCLUSIONS: Our study demonstrated the co-circulation of multiple HEV serotypes in children with and without HFMD during epidemic. Our study deserves the attention on HFMD control.

OPG gene-modified adipose-derived stem cells improve bone formation around implants in osteoporotic rat maxillae.

Background: Osteoporosis is a significant barrier to the use of dental implants in the elderly for the treatment of tooth defects. Adipose derived stem cells (ADSCs) have demonstrated extensive potential for tissue repair and regeneration. The present study aimed to investigate the effectiveness of ADSCs engineered to express high levels of osteoprotegerin (OPG) for the treatment of bone loss in implant dentistry caused by estrogen deficiency. Methods: A rat model of osteoporosis was established through double oophorectomy, and the rats were treated by gene modified cells Adv-OPG-ADSCs. The effects of the treatment on maxilla tissue changes were evaluated using HE staining and micro-CT. Additionally, ALP and TRAP staining were used to assess osteoblast and osteoclast alterations. Finally, the changes in related osteoblast and osteoclast indicators were measured by RT-qPCR, Western blot, and ELISA. Results: The successfully generated high-OPG-expressing ADSCs led to increase of cell viability, proliferation, and osteoblast differentiation. Treatment with Adv-OPG-ADSCs significantly ameliorated maxillary morphology, trabecular volume reduction, and bone mineral density decline in the model of estrogen-deficient maxillary implant dentistry. Furthermore, the treatment was beneficial to promoting the generation of osteoblasts and inhibiting the generation of osteoclast. Adv-OPG-ADSCs increased OPG, ALP, OCN, and Runx-2 expressions in the maxilla while suppressing RANKL expression, and also increased the concentration of COL I and PINP, as well as decreased the concentration of CTX-1. Conclusion: Adv-OPG-ADSCs promote the formation of osteoblasts and inhibit the generation of osteoclasts, thereby inhibiting bone absorption, facilitating bone formation, and promoting the repair of maxillary bone after dental implantation in the presence of osteoporosis-related complications, especially in the setting of estrogen deficiency, providing scientific basis for the application of Adv-OPG-ADSCs in the treatment of implant related osteoporosis.

High-Performance Artificial Ligament Made from Helical Polyester Fibers Wrapped with Aligned Carbon Nanotube Sheets.

Repairing high-load connective tissues, such as ligaments, by surgically implanting artificial grafts after injury is challenging because they lack biointegration with host bones for stable interfaces. Herein, a high-performance helical composite fiber (HCF) ligament by wrapping aligned carbon nanotube (CNT) sheets around polyester fibers is proposed. Anterior cruciate ligament (ACL) reconstruction surgery shows that HCF grafts could induce effective bone regeneration, thus allowing the narrowing of bone tunnel defects. Such repair of the bone tunnel is in strong contrast to the tunnel enlargement of more than 50% for commercial artificial ligaments made from bare polyester fibers. Rats reconstructed with this HCF ligament show normal jumping, walking, and running without limping. This work allows bone regeneration in vivo through a one-step surgery without seeding cells or transforming growth factors, thereby opening an avenue for high-performance artificial tissues.

Hierarchical helical carbon nanotube fibre as a bone-integrating anterior cruciate ligament replacement.

High rates of ligament damage require replacements; however, current synthetic materials have issues with bone integration leading to implant failure. Here we introduce an artificial ligament that has the required mechanical properties and can integrate with the host bone and restore movement in animals. The ligament is assembled from aligned carbon nanotubes formed into hierarchical helical fibres bearing nanometre and micrometre channels. Osseointegration of the artificial ligament is observed in an anterior cruciate ligament replacement model where clinical polymer controls showed bone resorption. A higher pull-out force is found after a 13-week implantation in rabbit and ovine models, and animals can run and jump normally. The long-term safety of the artificial ligament is demonstrated, and the pathways involved in integration are studied.

An Anti-Biofouling Flexible Fiber Biofuel Cell Working in the Brain.

Biofuel cell (BFC) that transfers chemical energy into electricity is a promising candidate as an energy-harvesting device for implantable electronics. However, there still remain major challenges for implantable BFCs, including bulky and rigid device structure mismatching with soft tissues such as the brain, and the power output decreases due to the fouling process in a biological environment. Here, a flexible and anti-biofouling fiber BFC working in the brain chronically is developed. The fiber BFC is based on a carbon nanotube fiber electrode to possess small size and flexibility. A hydrophilic zwitterionic anti-biofouling polydopamine-2-methacryloyloxyethyl phosphorylcholine layer is designed on the surface of fiber BFC to resist the nonspecific protein adsorption in a complex biological environment. After implantation, the fiber BFC can achieve a stable device/tissue interface, along with a negligible immune response. The fiber BFC has first realized power generation in the mouse brain for over a month, exhibiting its promising prospect as an energy-harvesting device in vivo.

Analysis of Pepsin Concentration and Influencing Factors in Saliva of Elderly Nasal Feeding Patients.

BACKGROUND: Elderly patients receiving nasal feeding have weaker physiological function, and placement of a nasogastric tube weakens the natural barrier of the cardia-esophageal sphincter; therefore, the risk of gastroesophageal reflux (GER) is higher. Many studies have shown that pepsin is extremely sensitive in predicting GERD, so this study intends to investigate the level of pepsin in saliva of elderly patients with nasal feeding and analyze its influencing factors. METHODS: This was a cross-sectional study. Patients admitted to the Chinese PLA General Hospital from April 2018 to October 2018 who received nasal feeding were included. One ml of saliva was collected from each patient in while sitting during fasting in the morning and 1 hour after lunch for 3 consecutive days. Pepsin was quantified by enzyme-linked immunosorbent assay (ELISA). The patients were predivided into two groups (≥7.75µg/ml or <7.75µg/ml) based on the median pepsin. Baseline and clinical factors were compared. RESULTS: The mean age of the patients was 91.09 ± 4.91 years. There were statistical differences in diabetes and feeding methods between the two groups. There was a positive correlation between the morning and postprandial pepsin levels (r = 0.442, P < 0.001), and has no statistical difference (P = 0.175). Multivariate analysis showed that the risk factors for higher pepsin levels were diabetes (odds ratio (OR): 2.67; 95% CI: 1.225-5.819, P = 0.013) and nasal feeding methods (OR: 2.475; 95% CI: 1.183-5.180, P=0.016). CONCLUSIONS: For patients undergoing nasal feeding who are older than 80 years, the fasting and 1-hour postprandial pepsin concentration were consistent. Diabetes and feeding methods are risk factors for high pepsin levels. For the elderly over 80 years old, age has no influence on pepsin concentration.

Bacterial community colonization on tire microplastics in typical urban water environments and associated impacting factors.

Only limited information is available on bacterial communities' dynamics on tire microplastics in urban water environments. This study exploited 16S rDNA high-throughput sequencing to characterize bacterial communities on tire microplastics, using three different tire brands and tire sizes, in two typical urban water environments, including an influent pond of constructed wetland (CW) and its subsequent effluent into a landscape river (LR) during three different periods, namely, 1 month, 3 and 6 months. Results showed that the abundance of bacterial colonization on tire microplastics will increase over time. Proteobacteria, Bacteroidetes were the dominant bacteria at a phylum level, although they exhibited dynamic changes. At a genus level, the identifiable bacteria found in tire microplastics was generally the common bacteria in wastewater discharge, such as Aquabacterium and Denitratisoma. Additionally, alpha diversity showed no significant differences in bacterial communities at the same locations. While beta diversity showed that the bacterial communities on the tire microplastics in the two locations was different. BugBase revealed that tire microplastics could support pathogenic bacteria in urban water environments. PICRUSt (Phylogenetic Investigation of Communities by Reconstruction of Unobserved States) indicated that the abundance of microorganisms associated with metabolism and degradation increased with time. Moreover, the ambient environmental factors were the main influencing factors of bacterial communities on tire microplastics. Herein, the contribution rate of nutrient salts (NO2-N, NO3-N, NH4-N, CODcr) was approximately 63%, and that of environmental physical factors of T and pH was 50%. While physicochemical factors, including particle size, contact angle, element content only had a slight impact. Accordingly, tire microplastics, as an emerging environmental pollutant, can act as carries for bacterial colonization and propagation, particularly harmful microorganisms. Therefore, the obtained findings can provide new insight into potential risks of harmful microorganisms that colonize tire microplastics in urban water environments.

Functionalized helical fibre bundles of carbon nanotubes as electrochemical sensors for long-term in vivo monitoring of multiple disease biomarkers.

Mechanical mismatches between implanted electronics and biological tissues can lead to inaccurate readings and long-term tissue damage. Here, we show that functionalized multi-walled carbon nanotubes twisted into helical fibre bundles that mimic the hierarchical structure of muscle can monitor multiple disease biomarkers in vivo. The flexible fibre bundles are injectable, have a low bending stiffness and display ultralow stress under compression. As proof-of-concept evidence of the sensing capabilities of these fibre bundles, we show that the fibre bundles enable the spatially resolved and real-time monitoring of H2O2 when implanted in tumours in mice, and that they can be integrated with a wireless transmission system on an adhesive skin patch to monitor calcium ions and glucose in the venous blood of cats for 28 d. The versatility of the helical fibre bundles as chemically functionalized electrochemical sensors makes them suitable for multiple sensing applications in biomedicine and healthcare.

Simultaneous determination of multiple phytohormones in tomato by ionic liquid-functionalized carbon fibers-based solid-phase microextraction coupled with liquid chromatography-mass spectrometry.

Phytohormones are interrelated by synergistic or antagonistic crosstalk and play important roles in the regulation of plant growth and development. In order to understand the interaction between phytohormones in the plant physiological network, it is necessary to determine trace levels of multiple phytohormones simultaneously in a complex matrix. Here, we synthesized ionic liquids containing different functional groups and modified the surface of carbon fibers with them. Based on these carbon fibers-ionic liquid (CFs-IL) materials, a solid phase microextraction method was developed to enable the simultaneous extraction of phytohormones. The adsorption specificity of multiple phytohormones was studied by identifying the hydrophobic, electrostatic, and π-π interactions, as well as hydrogen bonds, which favor simultaneous extraction of the relevant acidic, alkaline and neutral phytohormones by improving compatibility. The proposed method, coupled with liquid chromatography-tandem mass spectrometry, was applied to the simultaneous determination of 13 acidic, alkaline and neutral phytohormones in tomato. The limits of quantification were found to be in the range of 0.32-54.05 ng mL-1 and 4.6-185.8 pg mL-1, respectively, when measured by QQQ and Q-TOF. All of the relative recoveries were in the range of 94.40-113.37% with RSDs ≤15.36% (n = 3) for spiked tomato samples. This method is expected to be widely applied to multiple phytohormones analysis for in-depth researches concerning the physiological networks of plants.

Stress distribution in a mandibular premolar after separated nickel-titanium instrument removal and root canal preparation: a three-dimensional finite element analysis.

OBJECTIVE: This study used finite element analysis (FEA) to assess the von Mises stresses of a mandibular first premolar after removing a separated instrument with an ultrasonic technique. METHODS: FEA models of the original and treated mandibular first premolar were reconstructed, and three models (the original canal, size 30/taper 0.04 canal, and separated instrument removal canal) were created. Two-direction (vertical and lateral) loading patterns were simulated with a 175-N force. The maximum von Mises stresses of the models within the roots from the apex to the cervical region were collected and summarized. RESULTS: Under vertical and lateral loads, all maximal values in the three models were localized in the straight-line access region. Compared with the original model (model 1), the treated models (models 2 and 3) had greater maximum stress values from the apex to the cervical region. Greater differences in the maximum von Mises stresses between models 2 and 3 were present in the straight-line access region. CONCLUSIONS: Separated instrument removal caused changes in stress distribution and increases in stress concentration in the straight-line access region of roots.

Triple sensitivity amplification for ultrasensitive electrochemical detection of prostate specific antigen.

In general, current difference (ΔI) due to immunoreactions is significant in determining biosensor sensitivity. In this work, a new strategy of triple sensitivity amplification for ultrasensitive electrochemical detection of prostate specific antigen (PSA) was developed. Au-poly(methylene blue) (Au-PMB) was implemented as a redox species with strong current signal at -0.144V and used to fabricate the substrate of the biosensor. Conductive reduced graphene oxide-Au nanocomposites (Au-rGO) were coated on the Au-PMB modified glassy carbon electrode (GCE) to amplify current signal. After peptides (CEHSSKLQLAK-NH2) were fixed on the Au-rGO/Au-PMB/GCE, the fixed peptides reacted with glutaraldehyde to immobilize polydopamine-Au-horse radish peroxidase nanocomposites (PDA-Au-HRP). The electrochemical sensing interface for PSA was realized. Due to smaller resistance compared to antibodies, the peptides which can be cleaved specifically by PSA were employed. After the incubation of PSA, a large ΔI was obtained and behaved as the decrease of current signal. Then the remaining PDA-Au-HRP accelerated an enzyme-catalyzed precipitation reaction between 4-chloro-1-naphthol and H2O2. A further decrease in current signal (namely the increase in ΔI) resulted from the poorly conductive precipitation adhering onto the biosensor. The designed biosensor presented a wide linear range from 1.0fgmL-1 to 100ngmL-1 with an ultralow detection limit of 0.11fgmL-1.

An interpenetrating network-strengthened and toughened hydrogel that supports cell-based nucleus pulposus regeneration.

Hydrogel is a suitable scaffold for the nucleus pulposus (NP) regeneration. However, its unmatched mechanical properties lead to implant failure in late-stage disc degeneration because of structural failure and implant extrusion after long-term compression. In this study, we evaluated an interpenetrating network (IPN)-strengthened and toughened hydrogel for NP regeneration, using dextran and gelatin as the primary network while poly (ethylene glycol) as the secondary network. The aim of this study was to realize the NP regeneration using the hydrogel. To achieve this, we optimized its properties by adjusting the mass ratios of the secondary/primary networks and determining the best preparation conditions for NP regeneration in a series of biomechanical, cytocompatibility, tissue engineering, and in vivo study. We found the optimal formulation of the IPN hydrogel, at a secondary/primary network ratio of 1:4, exhibited high toughness (the compressive strain reached 86%). The encapsulated NP cells showed increasing proliferation, cell clustering and matrix deposition. Furthermore, the hydrogel could support long-term cell retention and survival in the rat IVDs. It facilitated rehydration and regeneration of porcine degenerative NPs. In conclusion, this study demonstrates the tough IPN hydrogel could be a promising candidate for functional disc regeneration in future.

Characterization and adsorption mechanism of Zn2+ removal by PVA/EDTA resin in polluted water.

Batch adsorption experiments were conducted using a PVA/EDTA resin as an adsorbent to adsorb Zn(II) ions from single component system in which experimental parameters were studied including solution pH, contact time, adsorbent dose and initial metal ions concentration. The equilibrium isotherms were determined at pH 6 under constant ionic strength and at different temperatures. The results showed that the maximum removal of Zn(II) (99.8%) with 1 g L(-1) of sorbent was observed at 40 mg L(-1) at an initial pH value of 6. Removals of about 60-70% occurred in 15 min, and equilibrium was attained at around 30 min. The equilibrium data for the adsorption of Zn(II) on PVA/EDTA resin was tested with various adsorption isotherm models among which three models were found to be suitable for the Zn(II) adsorption. In addition, the kinetic adsorption fitted well to the pseudo-second-order model and the corresponding rate constants were obtained. Thermodynamic aspects of the adsorption process were also investigated. Furthermore a higher desorption efficiency of Zn(II) from the PVA/EDTA resin using acid treatment was available by more than 95%.