Computerized dynamic occlusal analysis and its correlation with static characters in post-orthodontic patients using the T-Scan system and the ABO objective grading system.

OBJECTIVES: This study was conducted to detect the overall performance of both static and dynamic occlusion in post-orthodontic patients using quantified methods, and to ascertain the correlation between the two states of occlusion. MATERIALS AND METHODS: A total of 112 consecutive patients evaluated by ABO-OGS were included in this study. Based on the pre-treatment Angle's classification of the malocclusion, samples were divided into four groups. After removing orthodontic appliances, each patients underwent the American Board of Orthodontic objective grading system (ABO-OGS) and T-Scan evaluations. All the scores were compared within these groups. Statistical evaluation included reliability tests, multivariate ANOVA, and correlation analyses (p < 0.05 was considered significant). RESULTS: The mean ABO-OGS score was satisfactory and did not differ by Angle classifications. The indices making substantial contributions to ABO-OGS were occlusal contacts, occlusal relationships, overjet, and alignment. Disocclusion time in post-orthodontic patients was longer than normal. Occlusion time, disocclusion time, and force distribution during dynamic motions were considerably influenced by static ABO-OGS measurements, especially occlusal contacts, buccolingual inclination, and alignment. CONCLUSION: Post-orthodontic cases that passed the static evaluation of clinicians and ABO-OGS may nevertheless be left with dental casts interference in dynamic motions. Both static and dynamic occlusion should be extensively evaluated before ending orthodontic treatment. Further research is needed on dynamic occlusal guidelines and standards.

The synthesis of weak acidic type hybrid monolith via thiol-ene click chemistry and its application in hydrophilic interaction chromatography.

In this work, a porous structure and good permeability monolithic column was polymerized in UV transparent fused-silica capillaries via photo-initiated thiol-ene click polymerization of 2,4,6,8-tetravinyl-2,4,6,8-tetramethylcyclotetrasiloxane (TMTVS), pentaerythritol tetra(3-mercaptopropionate)(PETMP), itaconic acid, respectively, in the presence of porogenic solvents (tetrahydrofuranand methanol) and an initiator (2,2-dimethoxy-2-phenylacetophenone) (DMPA) within 30 min. The physical properties of this monolith were characterized by scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy and nitrogen adsorption/desorption measurements. For an overall evaluation of the monolith in chromatographic application, separations of polycyclic aromatic hydrocarbons (PAHs), phenols, amides and bases were carried out. The column efficiency of this monolith could be as high as 112 560 N/m. It also possesses a potential application in fabrication of monoliths with high efficiency for c-LC. In addition, the resulting monolithic column demonstrated the potential use in analysis of environment waters.

Enteric polymer based on pH-responsive aliphatic polycarbonate functionalized with vitamin E to facilitate oral delivery of tacrolimus.

To improve the bioavailability of orally administered drugs, we synthesized a pH-sensitive polymer (poly(ethylene glycol)-poly(2-methyl-2-carboxyl-propylene carbonate)-vitamin E, mPEG-PCC-VE) attempting to integrate the advantages of enteric coating and P-glycoprotein (P-gp) inhibition. The aliphatic polycarbonate chain was functionalized with carboxyl groups and vitamin E via postpolymerization modification. Optimized by comparison and central composite design, mPEG113-PCC32-VE4 exhibited low critical micelle concentration of 1.7 × 10(-6) mg/mL and high drug loading ability for tacrolimus (21.2% ± 2.7%, w/w). The pH-responsive profile was demonstrated by pH-dependent swelling and in vitro drug release. Less than 4.0% tacrolimus was released under simulated gastric fluid after 2.5 h, whereas an immediate release was observed under simulated intestinal fluid. The mPEG113-PCC32-VE4 micelles significantly increased the absorption of P-gp substrate tacrolimus in the whole intestine. The oral bioavailability of tacrolimus micelles was 6-fold higher than that of tacrolimus solution in rats. This enteric polymer therefore has the potential to become a useful nanoscale carrier for oral delivery of drugs.

New Cretaceous Fossil Achilidae Taxa (Insecta, Hemiptera, Fulgoromorpha) from Burmese Ambers with Description of Niryasaburniini Trib. Nov.

A new species Niryasaburnia nigrutomia sp. nov. of the planthopper family Achilidae from Burmese amber collected from Hukawng Valley (Tanai) of northern Myanmar, is described, notably based on forewing pattern coloration and metatibiotarsal teeth conformation. A new fossil genus with its type species Sinuovenaxius kachinensis gen. et sp. nov. is also described. The tribe Niryasaburniini trib. nov. is established to include Niryasaburnia Szwedo, 2004, and Sinuovenaxius gen. nov., based on a unique combination of characters, of which the following states are particularly notable: head with compound eyes around half the length of pronotum, late forking of ScP+R and CuA after the fusion of Pcu+A1 on the forewing, apical teeth of metatarsomeres I and II both with subapical platellar sensilla, and a unique hindwing pattern with simple RP and biforked MP, CuA with two terminals only, and with A2 simple, reaching the posterior wing margin. The hindwing venation of this new tribe with RP with only one terminal and both MP and CuA with two terminals is unique in Achilidae.

Effects of microplastics and combined pollution of polystyrene and di-n-octyl phthalate on photosynthesis of cucumber (Cucumis sativus L.).

Photosynthesis provides carbon sources and energy for crop growth and development, and the widespread presence of microplastics and plastic plasticisers in agricultural soils affects crop photosynthesis, but the mechanism of the effect is not clear. This study aims to investigate the effects of different microplastics and plasticizers on cucumber photosynthesis. Using polyvinyl chloride (PVC), polyethylene (PE), polystyrene (PS), and di-n-octyl phthalate (DOP) as representative microplastics and plasticizers, we assessed their impact on cucumber photosynthesis. Our results reveal significant alterations in key parameters: intercellular CO2 concentration (Ci) and transpiration rate (Tr) increased across all treatments, whereas stomatal limit value (Ls) and water use efficiency (WUE) decreased. Notably, PS + DOP treatment led to a significant reduction in the maximum efficiency of photosystem II (Fv/Fm) and ATP accumulation. Furthermore, PE and PS + DOP treatments decreased lycopene and ɛ-carotene synthesis rates, as well as abscisic acid (ABA) accumulation. All treatments inhibited the conversion of ß-carotene into strigolactone (SL) and decreased chlorophyll synthesis rates, with PS + DOP exhibiting the most severe impact. Regarding chlorophyll degradation pathways, PVC and PE treatments reduced chlorophyll decomposition rates, whereas DOP with PS promoted degradation. PE and PS treatments also impaired light energy capture, electron transport, and the structural stability of photosystems I and II, as well as photosynthetic capacity and NADPH and ATP synthesis rates. Our findings underscore the differential impacts of microplastics and plasticizers on cucumber photosynthesis, with PS + DOP having the most detrimental effect. These results shed light on the complex interactions between microplastics and plant physiology, highlighting the urgent need for mitigation strategies in agricultural practices to safeguard crop productivity and environmental sustainability.

3D superimposition of human dentition contours in personal identification: A preliminary study.

The human permanent dentition has been commonly used for personal identification due to its uniqueness. Limited research, however, is conducted using 3D digital dental models. We propose to develop a new 3D superimposition method using the contours of human dentition and to further evaluate its feasibility. A total of 270 intraoral scan models were collected from 135 subjects. After a one-year interval, 52 subjects were chosen at random and the secondary intraoral scan models were obtained. The dentition contours of the first and secondary models were extracted to form a resource dataset and a test dataset. Through the application of the iterative nearest point (ICP) algorithm, the test dataset was registered with the resource dataset, and the root mean square error (RMSE) values of the point-to-point distances were calculated. 104 genuine pairs and 13,936 imposter pairs were generated, and in this study, the registration accuracy was 100%. The difference between mean RMSE values for the genuine pair (0.20 ± 0.06 mm) and the minimum RMSE value for the imposter pair (0.83 ± 0.06 mm) was significant in the maxillary arch (p < 0.05). Similarly, in the mandibular arch, the difference between mean RMSE values for the genuine pair (0.22 ± 0.07 mm) and the minimum RMSE value for the imposter pair (0.85 ± 0.08 mm) was significant (p < 0.05). The difference between the RMSE value for the genuine pair in the maxillary and the mandibular arch was significant (p < 0.05). This study indicated the feasibility of dentition contour-based model superimposition and could be considered for personal identification in the future.

Hierarchically porous cellulose-based carbon aerogels with N-doped skeletons and encapsulated iron-based catalysts for efficient tetracycline catalytic degradation.

Three-dimensional interpenetrating and hierarchically porous carbon material is an efficient catalyst support in water remediation and it is still a daunting challenge to establish the relationship between hierarchically porous structure and catalytic degradation performance. Herein, a highly porous silica (SiO2)/cellulose-based carbon aerogel with iron-based catalyst (FexOy) was fabricated by in-situ synthesis, freeze-drying and pyrolysis, where the addition of SiO2 induced the hierarchically porous morphology and three-dimensional interpenetrating sheet-like network with nitrogen doping. The destruction of cellulose crystalline structure by SiO2 and the iron-catalyzed breakdown of glycosidic bonds synergistically facilitated the formation of electron-rich graphite-like carbon skeleton. The unique microstructure is confirmed to be favorable for the diffusion of reactants and electron transport during catalytic process, thus boosting the catalytic degradation performance of carbon aerogels. As a result, the catalytic degradation efficiency of tetracycline under light irradiation by adding only 5 mg of FexOy/SiO2 cellulose carbon aerogels was as high as 90 % within 60 min, demonstrating the synergistic effect of photocatalysis and Fenton reaction. This ingenious structure design provides new insight into the relationship between hierarchically porous structure of carbon aerogels and their catalytic degradation performance, and opens a new avenue to develop cellulose-based carbon aerogel catalysts with efficient catalytic performance.

Impact of occlusal contact pattern on dental stability and oromandibular system after orthodontic tooth movement in rats.

How to ensure dental stability in new positions and reduce the likelihood of relapse is a major clinical concern in the orthodontic field. Occlusal contacts between arches may affect the transmission of masticatory forces, thereby influencing the biological response of the periodontal and the oromandibular system. Occlusion factors that may influence the stability after orthodontic tooth movement (OTM) remain largely unknown. Hence, this research was conducted in order to investigate the influence of different occlusal contact patterns on tooth stability and oromandibular system including the masseter muscle and the temporomandibular joint following OTM. By modifying the occlusal surfaces, in vivo animal study models with distinct occlusal patterns corresponding to clinical circumstances were established. The relapse distance of teeth and the level of inflammatory factors in the gingival cervical fluid were analyzed. We also closely observed the histological remodeling of periodontal tissue, masseter tissue, and joint tissue after one week of relapse. Moreover, genes expression in the alveolar bone was analyzed to illustrate the potential biological mechanisms of relapse under the influence of different occlusal contact patterns following OTM. Different occlusal contact patterns after OTM in rats were established. The intercuspation contact between cusp and fossa group exhibited the lowest level of relapse movement, inflammatory factors and osteoclast activity (P < 0.05). On the other hand, groups with interferences or inadequate contacts exhibited more relapse movement, and tend to promote inflammation of periodontal tissue and activate bone resorption (P < 0.05). Adequate occlusal contacts without interference may enhance tooth stability and reduce the likelihood of relapse. After active orthodontic treatment, necessary occlusal adjustment should be made to achieve the desired intercuspation contact relationship and ensure adequate contact between the arches. The elimination of occlusal interferences is crucial to achieving optimal stability and promoting overall healthy condition of the oromandibular system.

Effect of local application of bone morphogenetic protein -2 on experimental tooth movement and biological remodeling in rats.

Background: This study attempts to detect the potential effects of local bone morphogenetic protein -2 (BMP-2) on orthodontic tooth movement and periodontal tissue remodeling. Methods: Forty adult SD rats were randomly divided into four groups: blank control group, unilateral injection of BMP-2 on the pressure side or tension side of orthodontic teeth and bilateral injection of BMP-2. Their maxillary first molar was moved by a 30 g constant force closed coil spring. 60 µL of BMP-2 with a concentration of 0.5 µg/mL was injected into each part at a time. In addition, three rats were selected as healthy control rats without any intervention. Fluorescent labeled BMP-2 was used to observe the distribution of exogenous BMP-2 in tissues. Micro-CT was used to measure the microscopic parameters of tooth displacement, trabecular bone and root absorption volume. Three different histological methods were used to observe the changes of tissue remodeling, and then the number of osteoclasts and the content of collagen fibers were calculated. Results: Compared with the blank control group, BMP-2 injection reduced the movement distance and increased the collagen fiber content and bone mass (p < 0.01). There was no significant difference in tooth movement distance, BV/TV ratio and BMD between injection sites in unilateral injection group (p > 0.05). In the case of bilateral injection of BMP-2, the osteogenesis is enhanced. Unilateral injection of BMP-2 did not promote root resorption, but double injection showed root resorption (p < 0.01). Conclusion: Our study does show that the osteogenesis of BMP-2 is dose-dependent rather than site-dependent when a certain amount of BMP-2 is applied around orthodontic teeth. Local application of BMP-2 around orthodontic teeth in an appropriate way can enhance bone mass and tooth anchorage without increasing the risk of root absorption volume. However, high levels of BMP-2 may cause aggressive root resorption. These findings are of great significance, that is, BMP-2 is an effective target for regulating orthodontic tooth movement.

Autonomous robotic surgery for zygomatic implant placement and immediately loaded implant-supported full-arch prosthesis: a preliminary research.

OBJECTIVES: A patient with extensive atrophy of the alveolar ridge in the posterior portion of the maxilla was selected to complete an experimental and clinical case of the robotic zygomatic implant to investigate the viability of an implant robotic system in clinical use. METHODS: The preoperative digital information was collected, and the implantation position and personalized optimization marks needed for robot surgery were designed in advance in a repair-oriented way. The resin models and marks of the patient's maxilla and mandible are all printed in 3D. Custom-made special precision drills and handpiece holders for robotic zygomatic implants were used to perform model experiments and compare the accuracy of the robotic zygomatic implant group (implant length = 52.5 mm, n = 10) with the alveolar implant group (implant length = 18 mm, n = 20). Based on the results of extraoral experiments, a clinical case of robotic surgery for zygomatic implant placement and immediate loading of implant-supported full arch prosthesis was carried out. RESULTS: In the model experiment, the zygomatic implant group reported an entry point error of 0.78 ± 0.34 mm, an exit point error of 0.80 ± 0.25 mm, and an angle error of 1.33 ± 0.41degrees. In comparison, the alveolar implant group (control group) reported an entry point error of 0.81 ± 0.24 mm, an exit point error of 0.86 ± 0.32 mm, and an angle error of 1.71 ± 0.71 degrees. There was no significant difference between the two groups (p > 0.05). In clinical cases, the average entry point error of two zygomatic implants is 0.83 mm, the average exit point error is 1.10 mm and the angle error is 1.46 degrees. CONCLUSIONS: The preoperative planning and surgical procedures developed in this study provide enough accuracy for robotic zygomatic implant surgery, and the overall deviation is small, which is not affected by the lateral wall deviation of maxillary sinus.

High Co-loading Capacity and Stimuli-Responsive Release Based on Cascade Reaction of Self-Destructive Polymer for Improved Chemo-Photodynamic Therapy.

Photodynamic therapy (PDT) shows a promising synergy with chemotherapy in the therapeutic outcome of malignant cancers. The minimal invasiveness and nonsystemic toxicity are appealing advantages of PDT, but combination with chemotherapy brings in the nonselective toxicity. We designed a polymeric nanoparticle system that contains both a chemotherapeutic agent and a photosensitizer to seek improvement for chemo-photodynamic therapy. First, to address the challenge of efficient co-delivery, polymer-conjugated doxorubicin (PEG-PBC-TKDOX) was synthesized to load photosensitizer chlorin e6 (Ce6). Ce6 is retained with DOX by a π-π stacking interaction, with high loading (41.9 wt %) and the optimal nanoparticle size (50 nm). Second, light given in PDT treatment not only excites Ce6 to produce cytotoxic reactive oxygen species (ROS) but also spatiotemporally activates a cascade reaction to release the loaded drugs. Finally, we report a self-destructive polymeric carrier (PEG-PBC-TKDOX) that depolymerizes its backbone to facilitate drug release upon ROS stimulus. This is achieved by grafting the ROS-sensitive pendant thioketal to aliphatic polycarbonate. When DOX is covalently modified to this polymer via thioketal, target specificity is controlled by light, and off-target delivery toxicity is mostly avoided. An oral squamous cell carcinoma that is clinically relevant to PDT was used as the cancer model. We put forward a polymeric system with improved efficiency for chemo-photodynamic therapy and reduced off-target toxicity.

Dipeptide-modified nanoparticles to facilitate oral docetaxel delivery: new insights into PepT1-mediated targeting strategy.

Oligopeptide transporter 1 (PepT1) has been a striking prodrug-designing target. However, the underlying mechanism of PepT1 as a target to facilitate the oral absorption of nanoparticles (NPs) remains unclear. Herein, we modify Poly (lactic-co-glycolic acid) (PLGA) NPs with the conjugates of dipeptides (L-valine-valine, L-valine-phenylalanine) and polyoxyethylene (PEG Mw: 1000, 2000) stearate to facilitate oral delivery of docetaxel (DTX) to investigate the oral absorption mechanism and regulatory effects on PepT1 of the dipeptide-modified NPs. The cellular uptake of the dipeptide-modified NPs is more efficient than that of the unmodified NPs in the stably transfected hPepT1- Hela cells and Caco-2 cells, suggesting the involvement of PepT1 in the endocytosis of NPs. The internalization of the dipeptide-modified NPs is proved to be a proton-dependent process. Moreover, the L-valine-valine modified NPs with shorter PEG chain exhibit distinct advantages in terms of intestinal permeability and oral absorption, resulting in significantly improved oral bioavailability of DTX. In summary, PepT1 could serve as a desirable target for oral nanoparticulate drug delivery and the dipeptide-modified NPs represent a promising nanoplatform to facilitate oral delivery of hydrophobic drugs with low bioavailability.

Docetaxel prodrug liposomes for tumor therapy: characterization, in vitro and in vivo evaluation.

There is a strong desire to develop docetaxel (DTX) formulation with good therapeutic effectiveness in view of serious adverse reactions of the commercial formulation of DTX (Taxotere®). In this study, a redox-responsive DTX-vitamin E prodrug was successfully formulated into liposomes with the drug loading of 4.14% ± 0.10%. Compared with DTX liposomes, the DTX prodrug liposomes (DPLs) showed good stability for 30-d shelf life and during dilution with different media. In vitro antitumor activity of DPLs on human prostatic carcinoma PC-3 cells and human lung cancer A549 cells was evaluated using cytotoxicity and apoptosis assays. In spite of a decrease in in vitro antitumor activity, the in vivo pharmacokinetic study reveals that DPLs exhibit significantly longer DTX plasma half-life (t1/2, 1.38-fold) and higher bioavailability (AUC0-t, 14.49-fold) compared with DTX liposomes. The antitumor activity of DPLs to the A549 tumor xenograft model showed selective accumulation in tumor tissue, significant inhibition the growth of the tumors and a much lower toxicity as seen in body weight loss, compared with DTX-Solution. Taken together, the results showed that DPLs is a promising strategy for DTX antitumor delivery.