VP2 mediates the release of the feline calicivirus RNA genome by puncturing the endosome membrane of infected cells.

Feline calicivirus (FCV) is one of the few members of the Caliciviridae family that grows well in cell lines and, therefore, serves as a surrogate to study the biology of other viruses in the family. Conley et al. (14) demonstrated that upon the receptor engagement to the capsid, FCV VP2 forms a portal-like assembly, which might provide a channel for RNA release. However, the process of calicivirus RNA release is not yet fully understood. Our findings suggest that the separation of the FCV capsid from its genome RNA (gRNA) occurs rapidly in the early endosomes of infected cells. Using a liposome model decorated with the FCV cell receptor fJAM-A, we demonstrate that FCV releases its gRNA into the liposomes by penetrating membranes under low pH conditions. Furthermore, we found that VP2, which is rich in hydrophobic residues at its N-terminus, functions as the pore-forming protein. When we substituted the VP2 N-terminal hydrophobic residues, the gRNA release efficacy of the FCV mutants decreased. In conclusion, our results suggest that in the acidic environment of early endosomes, FCV VP2 functions as the pore-forming protein to mediate gRNA release into the cytoplasm of infected cells. This provides insight into the mechanism of calicivirus genome release.IMPORTANCEResearch on the biology and pathogenicity of certain caliciviruses, such as Norovirus and Sapovirus, is hindered by the lack of easy-to-use cell culture system. Feline calicivirus (FCV), which grows effectively in cell lines, is used as a substitute. At present, there is limited understanding of the genome release mechanism in caliciviruses. Our findings suggest that FCV uses VP2 to pierce the endosome membrane for genome release and provide new insights into the calicivirus gRNA release mechanism.

Modulating Lipid Membrane Morphology by Dynamic DNA Origami Networks.

Membrane morphology and its dynamic adaptation regulate many cellular functions, which are often mediated by membrane proteins. Advances in DNA nanotechnology have enabled the realization of various protein-inspired structures and functions with precise control at the nanometer level, suggesting a viable tool to artificially engineer membrane morphology. In this work, we demonstrate a DNA origami cross (DOC) structure that can be anchored onto giant unilamellar vesicles (GUVs) and subsequently polymerized into micrometer-scale reconfigurable one-dimensional (1D) chains or two-dimensional (2D) lattices. Such DNA origami-based networks can be switched between left-handed (LH) and right-handed (RH) conformations by DNA fuels and exhibit potent efficacy in remodeling the membrane curvatures of GUVs. This work sheds light on designing hierarchically assembled dynamic DNA systems for the programmable modulation of synthetic cells for useful applications.

Occlusal contact and clearance of posterior implant-supported single crowns designed by two different methods: a self-controlled study.

BACKGROUND: Precise occlusal design of implant-supported fixed prostheses is difficult to achieve by the conventional wax-up method, often requiring chairside adjustments. The computer-aided design (CAD) method is promising. This study aims to compare the occlusal contacts and clearance of posterior implant-supported single crowns designed by the CAD and conventional methods. METHODS: Sample size calculation indicated fourteen samples per group. Two sets of type-IV plaster casts with a single implant analog inserted in the posterior teeth region were mounted as master casts in a mechanical articulator in maximal intercuspal position (MIP). Seven working cast sets were obtained from each master cast by a closed tray technique, and mounted in MIP. Two implant-supported single crowns were designed with an occlusal clearance to achieve light occlusal contact in each working cast set by CAD and conventional method, separately. For the CAD group, the crown was designed in digital models obtained by scanning the working casts. For the conventional group, wax-up of the crown was prepared on the working casts and scanned to generate a STL file. In the working and master casts, mean and minimum occlusal clearances in the designed occlusal contact area of the both finished prostheses were calculated using the occlusal clearance (OC) and occlusal record (OR) method. The prostheses' occlusion was evaluated in master casts. RESULTS: For the evaluation in the working casts, both design methods had similar mean occlusal clearances by the OC method (195.4 ± 43.8 vs. 179.8 ± 41.8 µm; P = 0.300), while CAD group resulted in a significantly larger minimum occlusal clearance in the designed occlusal contact area (139.5 ± 52.3 vs. 99.8 ± 43.8 µm; P = 0.043). Both design methods had similar mean and minimum occlusal clearances by the OR method (P > 0.05). For the evaluation in the master casts, both design techniques had similar mean and minimum occlusal clearances, number and distribution of occlusal contacts, and lateral interference ratios (P > 0.05). CONCLUSION: Occlusal contact and clearance of posterior implant-supported single crowns designed by the CAD method can be at least as good as those designed by the conventional wax-up method.

Rock1 is a novel host dependency factor of human enterovirus A71: Implication as a drug target.

Human enterovirus A71 (EV-A71) is the major causative agent of hand-foot-and-mouth disease (HFMD) commonly associated with severe neurological diseases, particularly in children under 5 years of age. Several investigational therapeutic agents and vaccine candidates are being developed. However, no approved drug against EV-A71 infection is available, and no proven drug target has been identified. Since host kinases are key regulators of multiple signaling pathways in response to viral infections, here we screened a kinase inhibitor library and identified potent inhibitors against EV-A71 infection. Among the hits, GSK269962A, a Rho Associated Coiled-Coil Containing Protein Kinase (Rock) inhibitor with potent antiviral activity, was selected for further analysis. We found that this Rock inhibitor not only efficiently suppressed the replication of EV-A71 in RD cells, but also in human intestinal organoids, in a dose-dependent manner. Interestingly, small interfering RNA depletion of Rock1, but not Rock2, significantly restricted viral replication in RD cells, indicating that Rock1 is a novel host dependency factor for EV-A71 replication and can serve as a target for the development of anti-EV-A71 therapeutics.

Construction of Surface-Modified Polydopamine Nanoparticles for Sequential Drug Release and Combined Chemo-Photothermal Cancer Therapy.

Single chemotherapy often causes severe adverse effects and drug resistance to limit therapeutic efficacy. As a noninvasive approach, photothermal therapy (PTT) represents an attractive option for cancer therapy due to the benefits of remote control and precise treatment methods. Nanomedicines constructed with combined chemo-photothermal properties may exert synergistic effects and improved antitumor efficacy. In this study, we developed polydopamine (PDA)-coated nanoparticles grafted with folic acid (FA) and polyethylene glycol to transport doxorubicin (DOX) for targeted cancer therapy. The results showed that this delivery vehicle has a nanoscale particle size and narrow size distribution. No particle aggregation or significant drug leakage was observed during the stability test. This system presented excellent photothermal conversion capability under near-infrared light (NIR) laser irradiation due to the PDA layer covering. In vitro dissolution profiles demonstrated that sequential and triggered DOX release from nanoparticles was pH-, NIR irradiation-, and redox level-dependent and could be best fitted with the Ritger-Peppas equation. FA modification effectively promoted the intracellular uptake of nanoparticles by HepG2 cells and therefore significantly inhibited cell recovery and induced tumor cell apoptosis. Compared to the free DOX group, nanoparticles reduced the DOX concentration in the heart to avoid drug-related cardiotoxicity. More importantly, the in vivo antitumor efficacy results showed that compared with the single chemotherapy strategy, the nanoparticle group exerted combined and satisfactory tumor growth inhibition effects with good biocompatibility. In summary, this nanocarrier delivery system can organically combine chemotherapy and PTT to achieve effective and precise cancer treatment.

DNA Origami Guided Self-Assembly of Plasmonic Polymers with Robust Long-Range Plasmonic Resonance.

Plasmonic polymers consisting of metallic nanoparticles (NPs) are able to squeeze light into the deep-subwavelength space and transfer along a highly confined nanoscale path in long range. DNA nanotechnology, particularly benefiting from the molecular programmability of DNA origami, has provided otherwise nearly impossible platforms for constructing plasmonic nanoparticle polymers with designer configurations and nanoscale gaps. Here, we design and assemble a DNA origami hashtag tile that is able to polymerize into one-dimensional chains with high rigidity. The DNA origami hashtag chains are used as frames to enable robust, versatile, and precise arrangement of metallic NPs into micrometer-long chiral and magnetic plasmonic polymers, which are capable of efficiently transporting plasmonic angular momentum and magnetic surface plasmonic polaritons at the deep-subwavelength scale. Our work provides a molecular platform for the fabrication of long, straight, and structurally complex nanoparticle polymers with emerging plasmonic properties that are appealing to a variety of fields.

Orthodontic incisor retraction caused changes in the soft tissue chin area: a retrospective study.

BACKGROUND: To investigate the area and morphological changes around the soft tissue chin after orthodontic incisor retraction. METHODS: Fifty-nine female adults with bimaxillary protrusion requiring extraction of four premolars were included in the study. Cephalograms were taken before (T0) and after (T1) orthodontic treatment. The soft tissue changes, including the area, thickness and morphology were measured. Paired-t tests were performed for statistical comparisons. Pearson correlation analyses and backward multivariate regression analyses were used to identify the relationship between the soft tissue changes and incisor retraction. RESULTS: Following the incisor retractions (5.35 ± 1.79 mm and 4.42 ± 1.62 mm for the upper and lower, respectively), there was a significant increase in the soft tissue thickness of L1c-LL (0.64 ± 1.67 mm, P = 0.025) and Pog-Pog' (0.44 ± 1.10 mm, P = 0.022), and a significant decrease in the soft tissue thickness of B-B' (1.21 ± 1.34 mm, P <  0.01). Changes in the area of soft tissue chin and lower lip were not statistically significant (P > 0.05). Pearson coefficient between the thickness changes of B-B' and the retraction of lower incisors was - 0.376. The multiple correlations between the soft tissue thickness changes and incisor retractions were Y = 1.02-0.42a + 0.42b for L1c-LL, and Y = 0.17-0.31b for B-B'. CONCLUSIONS: The orthodontic incisor retraction could cause soft tissue thickness changes (i.e. an increase in L1c-LL and Pog-Pog' and a decrease in B-B') without area changes.

The application of polypropylene mesh for testicular prosthesis in surgical castration for patients with prostate cancer.

BACKGROUND: To explore whether a polypropylene mesh is suitable for application as a new material for testicular prostheses. METHODS: The data of 65 patients with advanced prostate cancer who underwent surgical castration in hospital were collected and analyzed. Patients who preferred to undergo traditional orchidectomy (n = 16) were assigned to the control group, and patients who underwent subcapsular orchiectomy plus implantation of a polypropylene mesh testicular prosthesis (n = 49) were assigned to the experimental group. The presence of hematoma, infection, and other complications in patients in these two groups were investigated at 3 and 12 months following the surgery. The patients were also followed up using a self-designed testicular castration satisfaction questionnaire. RESULTS: A higher score indicated greater satisfaction. The mean score was 15.33 ± 2.85 in the experimental group and 4.63 ± 1.45 in the control group at 3 months after the surgery. The mean score was 14.92 ± 1.74 in the experimental group and 4.25 ± 1.61 in the control group at 12 months after the surgery. The difference between the two groups was statistically significant at the two time points (P < 0.01). CONCLUSIONS: Compared with orchidectomy alone, patients were more satisfied with subcapsular orchiectomy plus the implantation of a polypropylene mesh testicular prosthesis for the treatment of advanced prostate cancer. Furthermore, the polypropylene mesh testicular prosthesis maintained its original character over the duration of the study, with a good long-term effect. Thus, implantation of a polypropylene mesh testicular prosthesis is indicated to be safe and effective, and polypropylene mesh is potentially useful as a new material for testicular prostheses.

Aminobenzofuran-fused rhodamine dyes with deep-red to near-infrared emission for biological applications.

Aminobenzofuran-fused rhodamine dyes (AFR dyes) containing an amino group were constructed by an efficient condensation based on 3-coumaranone derivatives. AFR dyes exhibited significantly improved properties, including deep-red and near-infrared emissions, a large Stokes shift, good photostability, and wide pH stability. 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium assay experiments show that these AFR dyes are biocompatible for their low cytotoxicity to both A549 and HeLa cells. Cell imaging data reveal that AFR1, AFR1E, and AFR2 are mainly located in the mitochondria, while AFR3 is a lysosome tracker. As far as we know, NIR AFR3 is the longest fluorescent rhodamine derivative containing the amino group. These amino group-containing AFR dyes hold great potential in fluorogenic detection, biomolecule labeling, and cell imaging.

[Polypropylene mesh for testicular prothesis implantation: A report of 57 cases].

OBJECTIVE: To search for an optimum method for testicular prothesis implantation in the treatment of testis loss. METHODS: We retrospectively analyzed the surgical methods and outcomes of 53 cases of terminal prostate cancer and 4 cases of unilateral testicular torsion treated by implantation of testicular prothesis with the polypropylene mesh. RESULTS: The 57 male patients all received testicular prothesis with the polypropylene mesh. All the patients were satisfied with the appearance and size of the scrotum after surgery. No scrotal hematoma, prosthesis infection, or autoimmune disease occurred postoperatively. CONCLUSION: Testis loss is not a rare condition clinically, for the treatment of which surgical implantation of testicular prothesis with the polypropylene mesh can achieve both a fine tissue compatibility and a desirable scrotal appearance.

Microfiber coupler based label-free immunosensor.

Optical microfibers and related structures which incorporate large evanescent field and minimal size offer new opportunities for biosensing applications. In this paper we report the development of an immunosensor based on a tapered microfiber coupler embedded in a low refractive index polymer. Biomolecules adsorbed on the microfiber coupler surface modify the surrounding refractive index. By immobilizing antigens on the surface of the sensing area, the microfiber coupler was able to operate as a label-free immunosensor to detect specific antibodies. We experimentally demonstrated for the first time the sensing ability of this sensor using a fibrinogen antigen-antibody pair. By monitoring the spectral shift in the wavelength domain, the sensor was shown to be capable of detecting the specific binding between fibrinogen and anti-fibrinogen. The detected signal was found to be proportional to the anti-fibrinogen present.

Effect of polypropylene microplastics on virus resistance in spotted sea bass (Lateolabrax maculatus).

Microplastics (MPs) pollution is a hot issue of global concern. Polypropylene microplastics (PP-MPs) age quickly in the marine environment and break down into smaller particles because of their relatively low temperature resistance, poor ultraviolet resistance, and poor antioxidant capacity, making them one of the major pollutants in the ocean. We assessed whether long-term exposure to micron-sized PP-MPs influences fish susceptibility to viral diseases. We found that exposure to PP-MPs (1-6 µm and 10-30 µm) at concentrations of 500 and 5000 µg/L resulted in uptake into spleen and kidney tissues of Lateolabrax maculatus. Increased activation of melanomacrophage centers was visible in histopathological sections of spleen from fish exposed to PP-MPs, and greater deterioration was observed in the spleen of fish infected by largemouth bass ulcerative syndrome virus after PP-MPs exposure. Additionally, exposure to PP-MPs led to significant cytotoxicity and a negative impact on the antiviral ability of cells. PP-MPs exposure had inhibitory or toxic effects on the immune system in spotted sea bass, which accelerated virus replication in vivo and decreased the expression of the innate immune- and acquired immune related genes in spleen and kidney tissues, thus increasing fish susceptibility to viral diseases. These results indicate that the long-term presence of micron-sized PP-MPs might impact fish resistance to disease, thereby posing a far-reaching problem for marine organisms.

Construction of multileveled and oriented micro/nano channels in Mg doped hydroxyapitite bioceramics and their effect on mimicking mechanical property of cortical bone and biological performance of cancellous bone.

Drawing on the structure and components of natural bone, this study developed Mg-doped hydroxyapatite (Mg-HA) bioceramics, characterized by multileveled and oriented micro/nano channels. These channels play a critical role in ensuring both mechanical and biological properties, making bioceramics suitable for various bone defects, particularly those bearing loads. Bioceramics feature uniformly distributed nanogrooves along the microchannels. The compressive strength or fracture toughness of the Mg-HA bioceramics with micro/nano channels formed by single carbon nanotube/carbon fiber (CNT/CF) (Mg-HA(05-CNT/CF)) are comparable to those of cortical bone, attributed to a combination of strengthened compact walls and microchannels, along with a toughening mechanism involving crack pinning and deflection at nanogroove intersections. The introduction of uniform nanogrooves also enhanced the porosity by 35.4 %, while maintaining high permeability owing to the capillary action in the oriented channels. This leads to superior degradation properties, protein adsorption, and in vivo osteogenesis compared with bioceramics with only microchannels. Mg-HA(05-CNT/CF) exhibited not only high strength and toughness comparable to cortical bone, but also permeability similar to cancellous bone, enhanced cell activity, and excellent osteogenic properties. This study presents a novel approach to address the global challenge of applying HA-based bioceramics to load-bearing bone defects, potentially revolutionizing their application in tissue engineering.

Genetic Connectivity of Gut Microbiota and Oral Ulcers: A Mendelian Randomization Study.

OBJECTIVES: The aim of this study was to reveal the relationship, if any, between gut microbiota and oral ulcers. METHODS: We performed a 2-sample Mendelian randomization (MR) study to estimate the roles of gut microbiota in mouth ulcers. The summary datasets of gut microbiota were from the largest genome-wide association study (GWAS) conducted by MiBioGen, and data of mouth ulcers were obtained from UK Biobank. Random effect inverse variance-weighted, weighted median, MR Egger, simple mode and weighted mode were used to estimate the relationship. Sensitivity analyses were conducted to assess the heterogeneity and pleiotropy of instrumental variables. MR Steiger filtering was also applied to orient the causal direction. RESULTS: Three gut microbiota taxa were positively associated with mouth ulcers: Holdemania (odds ratio [OR] = 1.005, 95% confidence interval [CI]: 1.001-1.009, P = .019), Oxalobacter (OR = 1.004, 95% CI: 1.000-1.007, P = .032), and Ruminococcaceae UCG011 (OR = 1.006, 95% CI: 1.001-1.011, P = .029), while 4 gut microbiota taxa were negatively associated with mouth ulcers: Actinobacteria (OR = 0.992, 95% CI: 0.985-1.000, P = .042), Lactobacillales (OR = 0.995, 95% CI: 0.990-1.000, P = .034), Oscillospira (OR = 0.990, 95% CI: 0.984-0.997, P = .007) and Phascolarctobacterium (OR = 0.992, 95% CI: 0.986-0.997, P = .003). Sensitivity analyses validated the robustness of the association in between. CONCLUSIONS: This MR study identified a strong association between the quality of gut microbiota and oral ulcers. The findings are likely to expand the therapeutic targets for mouth ulcers.

A new strategy for accelerating recovery of anaerobic granular sludge after low-temperature shock: In situ regulation of quorum sensing microorganisms embedded in polyvinyl alcohol sodium alginate.

Low-temperature could inhibit the performance of anaerobic granular sludge (AnGS). Quorum sensing (QS), as a communication mode between microorganisms, can effectively regulate AnGS. In this study, a kind of embedded particles (PVA/SA@Serratia) based on signal molecule secreting bacteria was prepared by microbial immobilization technology based on polyvinyl alcohol and sodium alginate to accelerate the recovery of AnGS system after low temperature. Low-temperature shock experiment verified the positive effect of PVA/SA@Serratia on restoring the COD removal rate and methanogenesis capacity of AnGS. Further analysis by metagenomics analysis showed that PVA/SA@Serratia stimulated higher QS activity and promoted the secretion of extracellular polymeric substance (EPS) in AnGS. The rapid construction of EPS protective layer effectively accelerated the establishment of a robust microbial community structure. PVA/SA@Serratia also enhanced multiple methanogenic pathways, including direct interspecies electron transfer. In conclusion, this study demonstrated that PVA/SA@Serratia could effectively strengthen AnGS after low-temperature shock.

Regulation of extracellular polymers based on quorum sensing in wastewater biological treatment from mechanisms to applications: A critical review.

Extracellular polymeric substances (EPS) regulated by quorum sensing (QS) could directly mediate adhesion between microorganisms and form tight microbial aggregates. Besides, EPS have redox properties, which can facilitate electron transfer for promoting electroactive bacteria. Currently, the applications research on improving wastewater biological treatment performance based on QS regulated EPS have been widely reported, but reviews on the level of QS regulated EPS to enhance EPS function in microbial systems are still lacking. This work proposes the potential mechanisms of EPS synthesis by QS regulation from the viewpoint of material metabolism and energy metabolism, and summarizes the effects of QS on EPS synthesis. By synthesizing the role of QS in EPS regulation, we further point out the applications of QS-regulated EPS in wastewater biological treatment, which involve a series of aspects such as strengthening microbial colonization, mitigating membrane biofouling, improving the shock resistance of microbial metabolic systems, and strengthening the electron transfer capacity of microbial metabolic systems. According to this comprehensive review, future research on QS-regulated EPS should focus on the exploration of the micro-mechanisms, and economic regulation strategies for QS-regulated EPS should be developed, while the stability of QS-regulated EPS in long-term production experimental research should be further demonstrated.

Association between periodontitis and endometriosis: a bidirectional Mendelian randomization study.

Introduction: A potential association between periodontitis and endometriosis has been indicated in previous observational studies. Nevertheless, the causal link between these two disorders has not been clarified. Methods: Based on publicly available genome-wide association study (GWAS) summary datasets, we conducted a bidirectional Mendelian randomization (MR) study to investigate the relationship between periodontitis and endometriosis and its subtypes. Single nucleotide polymorphisms (SNPs) strongly associated with candidate exposures at the genome-wide significance level (P < 5 × 10-8) were selected as instrumental variables (IVs). The inverse variance-weighted regression (IVW) was performed to estimate the causal effect of periodontitis on endometriosis. We further conducted two sensitivity analyses, MR-Egger and weighted median, to test the validity of our findings. The main results were replicated via data from the UK Biobank. Finally, a reverse MR analysis was performed to evaluate the possibility of reverse causality. Results: The IVW method suggested that periodontitis was positively associated with endometriosis of the pelvic peritoneum (OR = 1.079, 95% CI = 1.016 to 1.146, P = 0.014). No causal association was indicated between periodontitis and other subtypes of endometriosis. In reversed analyses, no causal association between endometriosis or its subtypes and periodontitis was found. Conclusions: Our study provided genetic evidence on the causal relationship between periodontitis and endometriosis of the pelvic peritoneum. More studies are necessary to explore the underlying mechanisms.

Gradiently Foaming Ultrasoft Hydrogel with Stop Holes for Highly Deformable, Crack-Resistant and Sensitive Conformal Human-Machine Interfaces.

Hydrogels are considered as promising materials for human-machine interfaces (HMIs) owing to their merits of tailorable mechanical and electrical properties; nevertheless, it remains challenging to simultaneously achieve ultrasoftness, good mechanical robustness and high sensitivity, which are the pre-requisite requirements for wearable sensing applications. Herein, for the first time, this work proposes a universal phase-transition-induced bubbling strategy to fabricate ultrasoft gradient foam-shaped hydrogels (FSHs) with stop holes for high deformability, crack-resistance and sensitive conformal HMIs. As a typical system, the FSH based on polyacrylamide/sodium alginate system shows an ultralow Young's modulus (1.68 kPa), increased sustainable strain (1411%), enhanced fracture toughness (915.6 J m-2), improved tensile sensitivity (21.77), and compressive sensitivity (65.23 kPa-1). The FSHs are used for precisely acquiring and identifying gesture commands of the operator to remotely control a surgical robot for endoscopy and an electric ship in a first-person perspective for cruising, feeding crabs and monitoring the environmental change in real-time.

Adsorption-desorption behaviors of ciprofloxacin onto aged polystyrene fragments in aquatic environments.

As two emerging pollutants of great concern, microplastics (MPs) and antibiotics inevitably cooccur in various aquatic environments and interact with each other, impacting the fate and ecological risks. Aging obviously complicates their interaction and deserves further study. Therefore, the adsorption-desorption behaviors of ciprofloxacin (CIP) onto polystyrene (PS) fragments with various aging extent were investigated, and the key physiochemical properties influencing the interaction and the interaction mechanisms were clarified by redundancy analysis, FTIR and XPS spectra. The physicochemical properties of PS MPs were significantly changed with aging time, and the morphological and chemical changes seemed to occur asynchronously. The adsorption of CIP onto the pristine PS MPs relied on physisorption, especially the ion-involving electrostatic and cation-π interaction. Due to the hydrogen bonding formed by the C-OH, CO, and O-CO groups of PS and CIP, the adsorption capacities of the aged PS MPs were greatly increased. The desorption efficiency of CIP from MPs in the gastric fluid was closely related to the solution ionic strengths, C-OH and CO groups of MPs, while that in the intestinal fluid was associated with O-CO groups of MPs. The different impact factors could be well described by the differences in the chemical components and pHs of the simulated gastric and intestinal fluids. This study gives a comprehensive understanding of the adsorption-desorption behaviors of antibiotics onto MPs at a molecular level and indicates that MPs could act as Trojan horses to transport antibiotics into aquatic organisms.

Effects of calcium supplements on oral bioavailability of fluoride in soil based on In Vivo and In Vitro methods.

Dietary calcium (Ca) intake can alleviate fluoride (F) induced fluorosis to maintain bone health. However, it is unclear whether calcium supplements can reduce the oral bioavailability of F present in contaminated soils. Here we evaluated the effects of Ca supplements on F bioavailability in three soils using an in vitro method (Physiologically Based Extraction Test) and an in vivo mouse model. Seven Ca salts, commonly used in calcium supplements, significantly reduced the F bioaccessibility in the gastric and small intestinal phases. Particularly for Ca phosphate at 150 mg Ca supplementation, F bioaccessibility in the small intestinal phase was reduced from 35.1-38.8% to 0.7-1.9% where soluble F concentrations were less than 1 mg/L. Overall, the eight Ca tablets tested in this study showed greater efficiency at decreasing F solubility. The in vitro bioaccessibility after Ca supplementation was consistent with the relative bioavailability of F. As supported by X-ray photoelectron spectroscopy, a possible mechanism is that freed F can be bound by Ca to form insoluble CaF2 and exchanged with OH groups from Al/Fe hydroxide to strongly adsorb F. These findings provide evidence of Ca supplementation in reducing health risks associated soil F exposure.