A nature-inspired multifunctional adhesive for cartilage tissue-biomaterial integration.

Surgical adhesives play a crucial role in tissue integration and repair, yet their application in wet conditions has been severely limited by inadequate adhesive strength and subpar biocompatibility. Furthermore, tissue adhesives have rarely been reported in cartilage tissue repair. In this study, a three-armed dopamine-modified hyaluronic acid derivative adhesive was prepared to function as a bio-inspired adhesive in moist environments. To meet the clinical requirements for cartilage tissue adhesion, we studied its chemical structure, including microscopic morphology, adhesion properties with materials and tissues, in vivo degradation rules, and biological evaluation. The OGMHA8-DOPA adhesive with the optimal aldehyde substitution degree and dopamine-grafting rate was determined by analyzing the experimental conditions. SEM results revealed that the cartilage tissue adhered to a porous interconnected structure. The excellent biocompatibility of the material not only facilitated chondrocyte adhesion but also supported their proliferation on its surface. Animal experiments have demonstrated that this material has no observable inflammatory response or incidence of fibrous capsule formation. The degradation timeline of the material extends beyond the duration of two weeks. The dopamine-modified adhesive exhibited a tight interfacial binding force between the biomaterial and cartilage tissue and excellent biocompatibility in watery tissue, revealing its potential for application in cartilage tissue repair and minimally invasive surgery.

Percutaneous kyphoplasty through unilateral puncture on the convex side for the treatment of painful osteoporotic vertebral compression fracture with scoliosis.

PURPOSE: To assess the clinical safety, accuracy, and efficacy of percutaneous kyphoplasty (PKP) surgery using an enhanced method of unilateral puncture on the convex side for the treatment of painful osteoporotic vertebral compression fractures (P-OVCF) with scoliosis. METHODS: Clinical and radiographic data of P-OVCF patients with scoliosis who underwent PKP via unilateral puncture on the convex side from January 2018 to December 2021 were retrospectively analyzed. This technique's detailed surgical steps and tips were described. The local kyphosis angle (LKA), scoliosis Cobb angle (SCA), and local scoliosis Cobb angle (LSCA) were measured using X-ray and compared at pre-operation, post-operation, and the last follow-up. The width of pedicle (POW), inner inclination angle (IIA), lateral distance (LD), and puncture course length (PCL) were measured on the axial computed tomography image and compared between two sides. Postoperative computed tomography was employed to evaluate the condition of cement distribution and puncture. Clinical outcomes were evaluated using the Oswestry Disability Index (ODI) and Visual Analog Scale (VAS) for back pain (BP). RESULTS: Thirty-six patients, 23 women and 13 men, with an average age of 76.31 ± 6.28 years were monitored for 17.69 ± 4.70 months. The median surgical duration of single vertebrae was 35 min. The volume of bone cement for single vertebrae was 3.81 ± 0.87 ml and the proportion of sufficient cement distribution of the patients was 97.22. LKA was considerably improved from pre-operation to post-operation and sustained at the last follow-up. SCA and LSCA were not significantly modified between these three-time points. IIA, PCL, and LD were lower on the convex side than on the concave side. POW was considerably wider on the convex side. The ODI and VAS-BP scores were significantly improved after surgery and sustained during the follow-up. CONCLUSIONS: Combining with the proper assessment of the pre-injured life status of patients, PKP surgery using unilateral puncture on the convex side for the treatment of P-OVCF with scoliosis can achieve safe, excellent clinical, and radiographic outcomes.

Dehiscence and fenestration of skeletal Class III malocclusions with different vertical growth patterns in the anterior region: A cone-beam computed tomography study.

INTRODUCTION: This study aimed to evaluate the incidence and distribution of alveolar bone dehiscence and fenestration in skeletal Class III malocclusions with different vertical growth patterns in the anterior region using cone-beam computed tomography (CBCT). METHODS: In this retrospective study, 84 patients with skeletal Class III malocclusions who underwent CBCT were selected. This study included 28 patients with hypodivergence (mean age, 22.9 ± 3.9 years), 28 with normodivergence (mean age, 21.0 ± 3.0 years), and 28 with hyperdivergence (mean age, 21.0 ± 3.7 years). Teeth in the anterior region were examined using CBCT to detect dehiscence and fenestration. The incidences of dehiscence and fenestration in the anterior teeth region were recorded, and statistical analysis was conducted using SPSS software (version 25.0, IBM, Armonk, NY). RESULTS: Among the patients with skeletal Class III malocclusions, dehiscence and fenestration were prone to occur in the mandible. Dehiscence and fenestration were more prevalent in patients with hyperdivergence compared with in patients with hypodivergence and normodivergence. CONCLUSIONS: Dehiscence and fenestration are prevalent among patients with skeletal Class III malocclusion. Furthermore, the occurrence of alveolar bone defects is higher in patients with hyperdivergence.

Single-Crystal 2D Covalent Organic Frameworks for Plant Biotechnology.

Molecules chemically synthesized as periodic two-dimensional (2D) frameworks via covalent bonds can form some of the highest-surface area and -charge density particles possible. There is significant potential for applications such as nanocarriers in life sciences if biocompatibility can be achieved; however, significant synthetic challenges remain in avoiding kinetic traps from disordered linking during 2D polymerization of compatible monomers, resulting in isotropic polycrystals without a long-range order. Here, we establish thermodynamic control over dynamic control on the 2D polymerization process of biocompatible imine monomers by minimizing the surface energy of nuclei. As a result, polycrystal, mesocrystal, and single-crystal 2D covalent organic frameworks (COFs) are obtained. We achieve COF single crystals by exfoliation and minification methods, forming high-surface area nanoflakes that can be dispersed in aqueous medium with biocompatible cationic polymers. We find that these 2D COF nanoflakes with high surface area are excellent plant cell nanocarriers that can load bioactive cargos, such as the plant hormone abscisic acid (ABA) via electrostatic attraction, and deliver them into the cytoplasm of intact living plants, traversing through the cell wall and cell membrane due to their 2D geometry. This synthetic route to high-surface area COF nanoflakes has promise for life science applications including plant biotechnology.

Transformation and Prospects of Dentistry Innovations in China.

The burden of dental diseases is increasing in the Chinese population. However, the development of the dental industry falls behind the average development level of medical industry in China. The emergence of digital dental technologies has created significant opportunities for the development of the dental industry in China. This article explores the innovative development background of the Chinese dental industry, describes the current innovation status in Chinese medical colleges and enterprises, highlights key problems faced by the nation, enterprises, and hospitals, proposes solutions to these issues, and puts forwards a new concept of building an open and collaborative service system, a transformation path, and a whole-chain support system for innovations in dentistry.

Idiopathic multicentric Castleman disease with Sjögren's syndrome and secondary membranous nephropathy: a case report and review of the literature.

BACKGROUND: Idiopathic multicentric Castleman disease (iMCD) is an uncommon lymphoproliferative disorder and lacks treatment consensus. Herein, we report a case of iMCD complicated with Sjögren's syndrome (SS) and secondary membranous nephropathy (SMN). CASE PRESENTATION: A 45-year-old female with dry mouth for 3 months and anasarca and proteinuria for 2 months was admitted. She also experienced chest tightness, wheezing, fever, weight loss, moderate proteinuria and hypoalbuminemia. A computed tomography (CT) scan revealed a tissue mass in the thymus area and enlarged multiple lymph nodes. Her symptoms did not improve after resection of the thymus mass. The pathological findings were "reactive hyperplasia of the mediastinal lymph nodes and thymic hyperplasia". Lymph node biopsy findings confirmed iMCD with human herpes virus-8 (HHV-8) negativity. Based on anti-nuclear antibody (ANA) 1:320, anti-SSA and anti-SSB antibody positivity, salivary flow less than 0.1 ml/min and lip biopsy with focal lymphocytic sialadenitis, SS was diagnosed. Kidney biopsy showed secondary membranous nephropathy with endocapillary cell proliferation and infiltration of plasma cells and lymphocytes in the tubulointerstitium. Serum interleukin-6 (IL-6) levels were significantly increased, and therapy with tocilizumab (anti-IL-6 receptor antibody) worked well. The combination of cyclophosphamide (CyS) with methylprednisolone (MP) maintained satisfactory remission. CONCLUSIONS: Our case of iMCD with SS and SMN is rare. There is a need for increased awareness of the disease to avoid unnecessary procedures and misdiagnoses. IL-6 was extremely high, and there was a rapid response to anti-IL-6 receptor agents. The combination of CyS with MP maintained complete remission.

Analysis of percutaneous kyphoplasty under different types of anesthesia for the treatment of multiple osteoporotic vertebral fractures.

BACKGROUND: Surgeons recognize that using percutaneous kyphoplasty (PKP) under local anesthesia to treat osteoporotic vertebral fracture (OVF) prevents interference with the general situation of elderly patients suffering from multiple organ dysfunction. Surgeons can directly assess whether nerve injury occurs while the patient is awake. However, when patients with multiple osteoporotic vertebral fractures (m-OVFs) receive local anesthesia, fluoroscopy time often has to be increased, the operative time has to be extended, or the operation has to be terminated because of discomfort related to body posture. No relevant study has thus far been conducted on the type of anesthesia to administer to patients undergoing PKP for m-OVFs. This study aimed to determine which of the two types of anesthesia is more suitable for PKP for m-OVFs. METHODS: A retrospective study was conducted involving 159 patients who underwent PKP for m-OVFs from January 2016 to January 2020; 81 patients underwent PKP under general anesthesia (Group G), and 78 patients underwent PKP under local anesthesia (Group L). Clinical and adverse events were compared between the two groups. RESULTS: The intraoperative mean arterial pressure, average heart rate, average fluoroscopy times of each vertebral body, and operative time were less in Group G than in Group L. The visual analog scale (VAS) score was significantly lower after than before the operation. The anterior vertebral height (AVH), middle vertebral height (MVH), and kyphotic angle (KA) were significantly improved in both groups postoperatively. The improvement in VAS score, AVH, MVH, and KA in Group G were higher than those in Group L. No significant difference in the incidence of complications was observed between the two groups. CONCLUSION: PKP under either general anesthesia or local anesthesia was reliable. Compared with PKP under local anesthesia, PKP under general anesthesia could more reliably maintain the stability of vital signs, alleviate preoperative pain in patients, and attain a better orthopedic effect. Moreover, the latter does not increase the complications of patients with m-OVFs. However, the high medical expense of PKP under general anesthesia is a factor to consider when choosing the type of anesthesia.

Properties of reduced graphene/carbon nanotubes reinforced calcium phosphate bone cement in a microwave environment.

In this work, the setting process of reduced graphene (RGO)/carbon nanotubes (CNTs) reinforced calcium phosphate cement (CPC) were conducted in a microwave environment. The introduction of microwave can increase the reaction temperature, speed up the vibration of water molecules and eliminate bubbles from the interface between RGO, CNTs and the substrate. Comparing with CPC without microwave treatment, the final setting time of composites after microwave treatment are almost a half, the flexural strength and the compressive strength are increased by 19.86% and 21.68% respectively, which are 17.38 MPa and 104.52 MPa. Meanwhile, the CPC composites remain the excellent bioactivity.

Homeobox protein MSX-1 inhibits expression of bone morphogenetic protein 2, bone morphogenetic protein 4, and lymphoid enhancer-binding factor 1 via Wnt/ß-catenin signaling to prevent differentiation of dental mesenchymal cells during the late bell stage.

Homeobox protein MSX-1 (hereafter referred to as MSX-1) is essential for early tooth-germ development. Tooth-germ development is arrested at bud stage in Msx1 knockout mice, which prompted us to study the functions of MSX-1 beyond this stage. Here, we investigated the roles of MSX-1 during late bell stage. Mesenchymal cells of the mandibular first molar were isolated from mice at embryonic day (E)17.5 and cultured in vitro. We determined the expression levels of ß-catenin, bone morphogenetic protein 2 (Bmp2), Bmp4, and lymphoid enhancer-binding factor 1 (Lef1) after knockdown or overexpression of Msx1. Our findings suggest that knockdown of Msx1 promoted expression of Bmp2, Bmp4, and Lef1, resulting in elevated differentiation of odontoblasts, which was rescued by blocking the expression of these genes. In contrast, overexpression of Msx1 decreased the expression of Bmp2, Bmp4, and Lef1, leading to a reduction in odontoblast differentiation. The regulation of Bmp2, Bmp4, and Lef1 by Msx1 was mediated by the Wnt/ß-catenin signaling pathway. Additionally, knockdown of Msx1 impaired cell proliferation and slowed S-phase progression, while overexpression of Msx1 also impaired cell proliferation and prolonged G1-phase progression. We therefore conclude that MSX-1 maintains cell proliferation by regulating transition of cells from G1-phase to S-phase and prevents odontoblast differentiation by inhibiting expression of Bmp2, Bmp4, and Lef1 at the late bell stage via the Wnt/ß-catenin signaling pathway.

Tumor-penetrating Peptide-integrated Thermally Sensitive Liposomal Doxorubicin Enhances Efficacy of Radiofrequency Ablation in Liver Tumors.

Purpose To investigate the role of a tumor-penetrating peptide (internalizing CRGDRGPDC [iRGD])-integrated thermally sensitive liposomal (TSL) doxorubicin (DOX) in combination with radiofrequency (RF) ablation of liver tumors in an animal model. Materials and Methods Approval from the institutional animal care and use committee was obtained. Characterization of iRGD-TSL-DOX was performed in vitro. Next, H22 liver adenocarcinomas were implanted in 138 mice in vivo. The DOX accumulation and cell apoptosis of iRGD-TSL-DOX and TSL-DOX with or without RF were evaluated (n = 5) at different time points after treatment with quantitative analysis or pathologic staining. Mice bearing tumors were randomized into the following six groups (each group, eight mice): no treatment, iRGD-TSL-DOX, TSL-DOX, RF alone, RF ablation followed by TSL-DOX at 30 minutes (TSL-DOX combined with RF), and RF ablation followed by iRGD-TSL-DOX (iRGD-TSL-DOX combined with RF). Kaplan-Meier method was used to estimate the survival curves and log-rank test was used for comparison with statistical software. Results DOX encapsulation efficiency in iRGD-TSL-DOX was 97.5% ± 1.3 (standard deviation) with temperature-dependent drug release capability confirmed in vitro. In vivo, the iRGD-TSL-DOX group had overall higher DOX concentration in the tumor and had maximal difference at 24 hours compared with TSL-DOX group (2.7-fold). RF caused more intense cell apoptosis at 24 hours (median, 65% vs 21%, respectively; P < .001). For end-point survival, the iRGD-TSL-DOX combined with RF group had better survival (median, 32 days) than TSL-DOX combined with RF (median, 27 days; P = .035) or RF alone (median, 21 days; P < .001). Conclusion Conjugation to iRGD helped to improve intratumoral DOX accumulation and further enhanced the activity of TSL-DOX in RF ablation of liver tumors. © RSNA, 2017 Online supplemental material is available for this article.

Does Thermosensitive Liposomal Vinorelbine Improve End-Point Survival after Percutaneous Radiofrequency Ablation of Liver Tumors in a Mouse Model?

Purpose To investigate the role of thermosensitive liposome-encapsulated vinorelbine (Thermo-Vin) in combined radiofrequency (RF) ablation of liver tumors. Materials and Methods Approval from the institutional animal care and use committee was obtained before this study. First, the anticancer efficacy of Thermo-Vin was assessed in vitro (H22 cells) for 72 hours at 37°C or 42°C. Next, 203 H22 liver adenocarcinomas were implanted in 191 mice for in vivo study. Tumors were randomized into seven groups: (a) no treatment, (b) treatment with RF ablation alone, (c) treatment with RF ablation followed by free vinorelbine (Free-Vin) at 30 minutes, (d) treatment with RF ablation followed by empty liposomes (Empty-Lip+RF), (e) treatment with RF ablation followed by Thermo-Vin (5 mg/kg), (f) treatment with RF ablation followed by Thermo-Vin (10 mg/kg), and (g) treatment with RF ablation followed by Thermo-Vin (20 mg/kg). Tumor destruction areas and pathologic changes were compared for different groups at 24 and 72 hours after treatment. Kaplan-Meier analysis was used to compare end-point survival (tumor < 30 mm in diameter). Additionally, the effect of initial tumor size on long-term outcome was analyzed. Results In vitro, both Free-Vin and Thermo-Vin dramatically inhibited H22 cell viability at 24 hours. Likewise, in vivo, 10 mg/kg Thermo-Vin+RF ablation increased tumor destruction compared with RF ablation (P = .001). Intratumoral vinorelbine accumulation with Thermo-Vin+RF increased 15-fold compared with Free-Vin alone. Thermo-Vin substantially increased apoptosis at the coagulation margin and suppressed cellular proliferation in the residual tumor (P < .001). The Thermo-Vin+RF study arm also had better survival than the arm treated with RF ablation alone (mean, 37.6 days ± 20.1 vs 23.4 days ± 5.0; P = .001), the arm treated with Free-Vin+RF (23.3 days ± 1.2, P = .002), or the arm treated with Empty-Lip+RF (20.8 days ± 0.4, P < .001) in animals with medium-sized (10-12-mm) tumors. No significant difference in end-point survival was noted in the treatment arms with large or small tumors. Conclusion Thermo-Vin can effectively increase tumor destruction and improve animal survival. End-point survival is most affected in animals with medium-sized tumors, suggesting that combination therapy should be tailored to tumor size and the expected volume of ablation of the device used. (©) RSNA, 2016 Online supplemental material is available for this article.

Evidence that TP_0144 of Treponema pallidum is a thiamine-binding protein.

Thiamine pyrophosphate (TPP), the biologically active form of thiamine (also known as vitamin B1), is an essential cofactor for several important enzymes involved in carbohydrate metabolism, and therefore, it is required for all living organisms. We recently found that a thiamine-binding protein (TDE_0143) is essential for the survival of Treponema denticola, an important bacterial pathogen that is associated with human periodontitis. In this report, we provide experimental evidence showing that TP_0144, a homolog of TDE_0143 from the syphilis spirochete Treponema pallidum, is a thiamine-binding protein that has biochemical features and functions that are similar to those of TDE_0143. First, structural modeling analysis reveal that both TDE_0143 and TP_0144 contain a conserved TPP-binding site and share similar structures to the thiamine-binding protein of Escherichia coli. Second, biochemical analysis shows that these two proteins bind to TPP with similar dissociation constant (Kd) values (TDE_0143, Kd of 36.50 nM; TP_0144, Kd of 32.62 nM). Finally, heterologous expression of TP_0144 in a ΔTDE_0143 strain, a previously constructed TDE_0143 mutant of T. denticola, fully restores its growth and TPP uptake when exogenous thiamine is limited. Collectively, these results indicate that TP_0144 is a thiamine-binding protein that is indispensable for T. pallidum to acquire exogenous thiamine, a key nutrient for bacterial survival. In addition, the studies shown in this report further underscore the feasibility of using T. denticola as a platform to study the biology and pathogenicity of T. pallidum and probably other uncultivable treponemal species as well.

Molecular dynamics simulation of the processive endocellulase Cel48F from Clostridium cellulolyticum: a novel "water-control mechanism" in enzymatic hydrolysis of cellulose.

Glycoside hydrolase of Cel48F from Clostridium cellulolyticum is an important processive cellulose, which can hydrolyze cellulose into cellobiose. Molecular dynamics simulations were used to investigate the hydrolysis mechanism of cellulose. The two conformations of the Cel48F-cellotetrose complex in which the cellotetroses are bound at different sites (known as the sliding conformation and the hydrolyzing conformation) were simulated. By comparing these two conformations, a water-control mechanism is proposed, in which the hydrolysis proceeds by providing a water molecule for every other glucosidic linkage. The roles of certain key residues are determined: Glu55 and Asp230 are the most probable candidates for acid and base, respectively, in the mechanism of inverting anomeric carbon. Met414 and Trp417 constitute the water-control system. Glu44 might keep the substrate at a certain location within the active site or help the substrate chain to move from the sliding conformation to the hydrolyzing conformation. The other hydrophobic residues around the substrate can decrease the sliding energy barrier or provide a hydrophobic environment to resist entry of the surrounding water molecules into the active site, except for those coming from a specific water channel.

Association between periodontal disease and schizophrenia: a bidirectional two-sample Mendelian randomization study.

The connection between periodontal disease (PD) and schizophrenia (SCZ) has been reported in observational studies, but it remains unclear. This research aims to examine the bidirectional causal impacts between PD and SCZ. The FinnGen consortium supplied summarized data on PD for 346,731 individuals (87,497 cases and 259,234 controls) of Finnish ancestry, and information on SCZ was acquired from the OpenGWAS repository, encompassing 127,906 individuals (52,017 cases and 75,889 controls) of European ancestry. Next, we conducted Mendelian randomization (MR) analysis to establish a causal inference relationship between PD and SCZ. The inverse variance weighted (IVW) method was utilized as the primary analysis. Additionally, some sensitivity analyses were utilized to verify the stability of the results. The analysis of IVW results indicated no impact of PD on SCZ (IVW OR = 1.10, 95% CI 0.97-1.24, P = 0.14). Nevertheless, the inverse relationship between PD and SCZ was identified through reverse MR analysis (IVW OR = 1.03, 95% CI 1.01-1.05, P = 0.002). The findings from MR-Egger, weighted median, simple mode, and weighted mode approaches aligned with the outcomes of the IVW method. Based on sensitivity analyses, horizontal pleiotropy is unlikely to distort causal estimates. This study presented the initial proof of a genetic causal relationship between SCZ and PD, albeit with a minimal impact. Further exploration is needed to gain a deeper understanding of this relationship. Furthermore, no genetic causal relationship between PD and SCZ was identified.

When polyethylene terephthalate microplastics meet Perfluorooctane sulfonate in thermophilic biogas upgrading system: Their effect on methanogenesis.

Microplastics (MPs) and Perfluorooctane sulfonate (PFOS) are two hard-biodegradable pollutants widely existing in the waste streams treated by anaerobic digestion. However, their synergistic effect on methanogenic metabolism is still unknown. This study investigated the impact of polyethylene terephthalate (PET) MPs alone and co-existing with PFOS on CO2 conversion to CH4 in a thermophilic biogas upgrading system. The results showed that either PET MPs addition alone or coexisting with PFOS improved the ultimate CH4 percentage and increased CO2 utilization rate. When Fe0 was added into the reactors with PET to enhance the interspecies electron transfer, a potential defluorination was observed with a defluorination rate of 15.88 ± 1.53%. Exposure of the reactor to PFOS of 300 µg/L could change the methanogenic pathway, resulting in a newly emerged Methanomassiliicoccus with dominance of 16%. Furthermore, under the exposure of PFOS, the number of predicted genes regulating enzymes in methanogenic steps from CO2 increased. These results suggest that the co-existence of PET MPs and PFOS will not inhibit the activity of hydrotrophic methanogenes, and a portion of PFOS may be biodegraded during the methanogenesis under Fe0 regulation.

Comparison of the Clinical Efficacy and Bone Cement Distribution Difference Between Kummell's Disease and Osteoporotic Vertebral Compression Fracture After Percutaneous Kyphoplasty.

BACKGROUND: Kummell's disease (KD) and osteoporotic vertebral compression fracture (OVCF) are commonly found in patients with osteoporosis. Several studies have been conducted on bone cement distribution in OVCF or KD; a comparison between the 2 diseases is rarely reported. OBJECTIVES: To compare the clinical efficacy and bone cement distribution difference between KD and OVCFs after percutaneous kyphoplasty (PKP). STUDY DESIGN: This was a retrospective, nonrandomized controlled study. SETTING: Department of Orthopedics from an affiliated hospital. METHODS: From January 2018 to December 2020, 61 patients who underwent PKP surgery for single KD or OVCF and met the inclusion criteria were retrospectively reviewed. All patients were assigned to 2 groups: the KD group and the OVCF group. Clinical and radiologic characteristics, including the bone cement volume, leakage, bone cement dispersion scale, anterior vertebral height (AVH), median vertebral height (MVH), posterior vertebral height (PVH), Cobb angle and Visual Analog Scale (VAS) were analyzed and compared using Mimics three-dimensional (3D) reconstruction images and 3D reconstruction computed tomography, preoperatively, postoperatively, and 2 years after the operation, respectively. The correlations between the bone cement dispersion scale and the VH improvement rate (VHIR), VH change rate (VHCR), VAS improvement rate (VASIR), and follow-up VAS improvement rate (f-VASIR) were also evaluated. RESULTS: The mean follow-up time was 24.0 months. Postoperative VH, Cobb angle, vertebra volume, and VAS score were significantly improved in the 2 groups (P < 0.05). There was no statistical difference in postoperative parameters between the 2 groups. While a strong positive correlation between VHIR and bone cement dispersion scale was observed in the OVCF group (P < 0.01), no significant correlation between VHIR and bone cement dispersion scale was found in the KD group. There was no correlation between VASIR and bone cement dispersion scale in both groups. Compared with postoperation, VH was lower in both groups in later follow-up, and the difference between the 2 groups was statistically significant (P < 0.05). VH, VAS, f-VASIR, and VHCR had a worse manifestation in the KD group than in the OVCF group. However, no significant correlation was found between VHCR, f-VASIR, and bone cement dispersion scale in the 2 groups. LIMITATIONS: This study was limited by the non-randomized design, small sample size, and lack of a comprehensive follow-up period. CONCLUSIONS: Although there was no significant difference in the bone cement distribution and early clinical efficacy between KD and OVCF patients under the same surgical plan and surgeon, OVCF patients exhibited better long-term radiologic and clinical outcomes.

Use of ß-galactosidase liposome model as a novel method to screen freeze-drying cryoprotectants.

This study developed a novel method of screening cryoprotectants used to improve the survivability of lyophilized Lactobacillus helveticus. To develop a liposome encapsulated ß-galactosidase (ß-gal) as a cell membrane model, the ß-gal liposome was characterized in terms of mean size, poly dispersity index, zeta potential, along with transmission electron microscopy. 800 W of ultrasonic power and 10 min of sonication time were the optimal experimental conditions to obtain the desirable ß-gal liposome. Subsequently, different cryoprotectants were mixed with the ß-gal liposome during freeze-drying. After freeze-drying, liposomes were hydrolized, and the protective effect of cryoprotectants was assessed as the release rate of encapsulated ß-gal. The lowest release rate of ß-gal was obtained using 10 mg/100 ml trehalose and 0.2 mg/100 ml hyaluronic acid.

[Study of the preparation of silk fibroin gel and its morphology as drug release matrix in vitro and in vivo].

Silk fibroin (SF)/sodium alginate (SA) hydrogels can be used as drug injection materials. Homogenate was prepared by centrifugation of the pig myocardial extracellular matrix (PMM) and its modification of SF gel material. This paper observes and compares the different components SF, SF/SA, SF/SA/PMM to illustrate the SF/SA/PMM ternary material as a drug delivery composition material. This ternary material can shorten the gel time, and can make the gel form to be maintained better. Meanwhile, it makes the internal structure of the gel looser so that the hole wall becomes thinner and more conducive to the drug release. In addition, it has good biocompatibility proved by pathological analysis, and is able to enhance the mesenchymal stem cells growth activity, which has great significance in carrying out drug control release.

Cationic Modified PVA Hydrogels Provide Low Friction and Excellent Mechanical Properties for Potential Cartilage and Orthopedic Applications.

Poly(vinyl alcohol) (PVA) hydrogel is a promising candidate for articular cartilage repair yet restrained by its mechanical strength and tribological property. Current work reports a newly designed PVA-based hydrogel modified by glycerol (g), bacterial cellulose (BC), and a cationic polymer poly (diallyl dimethylammonium chloride) (PDMDAAC), which is a novel cationic strengthening choice. The resultant PVA-g-BC-PDMDAAC hydrogel proves the effectiveness of this modification scheme, with a confined compressive modulus of 19.56 MPa and a friction coefficient of 0.057 at a joint-equivalent load and low sliding speed. The water content, swelling property, and creep behavior of this hydrogel are also within a cartilage-mimetic range. The properties of PVA-based hydrogels before PDMDAAC addition are likewise studied as a cross-reference. Besides, PDMDAAC-modified PVA hydrogel realizes ideal mechanical and lubrication properties with a relatively low PVA concentration (10 wt.%) and facile fabrication process, which lays a foundation for mass production and marketization in the future.

Insight on the in vivo wear characteristics of goat artificial cervical disc implanted for 6 months.

Since the prosthesis may suffer overload or extreme motion during the daily activities, some special failure modes may be found in service. In order to give an insight on the in vivo stability of artificial cervical disc, the wear characteristics of goat prosthesis were studied after implanted in goat animal for 6 months. The prosthesis was designed with a ball-on-socket structure under the material combination of PE-on-TC4. The X-ray examination was performed to monitor the in vivo wear process. The worn morphology and wear debris were analyzed in detail by EDX and SEM. The result indicated that goat prosthesis revealed good safety and effectiveness during 6-month in vivo wear test. The wear damage occurred only on nucleus pulposus component with the dominant failure mode of surface fatigue and deformation. The damage distribution and wear severity was seriously uneven with a trend that the closer to the edge, the more severe the wear. For example, slippage phenomenon caused a wide and curved severe ploughing damage on the edge. Three kinds of debris were found including bone debris, carbon-oxygen compound debris and PE wear debris. Both bone debris and carbon-oxygen compound debris came from superior endplate while PE wear debris came from nucleus pulposus. The debris proportion for endplate was 82% for bone debris, 15% for carbon-oxygen compound debris and 3% for PE debris while for nucleus pulposus it was 8% for carbon-oxygen compound debris and 92% for PE debris. The size range of PE debris for nucleus pulposus was 0.1-100 µm, with an average size of 9.58 ± 16.34 µm. For the bone debris of endplate components, the size range was 0.1-600 µm, with an average size of 49.18 ± 94.54 µm. After wear test, the equivalent elastic modulus of nucleus pulposus increased from 28.55 MPa to 38.25 MPa. The results of FT-IR spectrum showed that the functional groups on the surface of polyethylene have not changed significantly after wear test. The results indicated that there were some differences in wear characteristics of wear morphology and wear debris between in vivo wear and in vitro wear.