Effect of amylase activity on mechanical properties of dental composite resin.

The purpose of this study was to investigate the effect of amylase activity on the mechanical properties of three dental composite resin (Filtek Z350; Filtek Z250 and Polofil Supra). The specimens were immersed in amylase solution at four different activities (25, 50, 100 and 200 KIU/L) with an artificial saliva solution (AS) as a control. The flexural strength (FS) and elastic modulus (EM) were determined in a three-point bending test after immersion for periods up to 12 months. In addition, surface roughness and surface morphology also determined. The FS of Filtek Z350 reaching the lowest level of 67.86 MPa after AS immersion for one year. There was a general trend for FS to decrease following immersion in AS for all the tested materials. However, the amylase groups did not undergo a significant decrease in FS and EM, and there was a slight increase in FS and EM for Polofil Supra.

Comparison of the Anterior Tooth and Lip Esthetic Characteristics of Hani and Han Youth in China When Speaking.

OBJECTIVE: This study aims to measure and analyze the lip and tooth dynamic esthetic characteristics at rest and during speech in order to provide a reference for its esthetic design and restoration among the Hani and Han populations in Yunnan Province, China. METHODS: Subjects of Hani and Han ethnicity in Yunnan were selected using multistage stratified sampling and inclusive criteria. The lip and tooth dynamic esthetic characteristics of the subjects at rest and during the pinyin pronunciation of "me", "yi", "fu", and "si" were recorded using digital photography and analyzed with computer software. RESULTS: No statistical difference was detected between the Hani and Han groups in the upper central-incisor display, when pronouncing the pinyin "yi". Furthermore, there were no statistical differences in lip dynamic esthetic parameters between the Hani and Han groups, except for the distance between the upper and lower lips when pronouncing "si". There were three kinds of correlation between the upper central-incisor edge and lower lip: separation, contact, and overlap. CONCLUSION: The display of upper central incisors and the mouth width of Hani people are larger than those of Han people when at rest. When the pinyin "si" is pronounced, the display of upper central incisors and the upper-lower lip distance of Hani people is less than that of Han people due to labial muscle movement.

The Dynamic Viscoelasticity of Dental Soft Polymer Material Containing Citrate Ester-Based Plasticizers.

The aim of this study was to investigate the dynamic viscoelasticity of dental soft polymer material containing citrate ester-based plasticizers. Three kinds of citrate ester-based plasticizer (Citroflex® C-2: TEC, Citroflex® A-2: ATEC, and Citroflex® A-4: ATBC), with the combination of 5 wt% ethyl alcohol, were used as the liquid phase. The dynamic viscoelastic properties of nine ethyl methacrylate polymers: (A, B, C, D, E, F, G, H, and I) were immersed in 37 °C distilled water for 0, 1, 3, 7, 14 and 30 days, respectively. The dynamic viscoelastic properties were measured at 37 °C with an automatic dynamic mechanical analyzer. The shear storage modulus (G'), shear loss modulus (G″), and loss tangent (tan δ) were determined at 1 Hz. These parameters were statistically analyzed by two-way and one-way ANOVA and Tukey's multiple comparison test at a predetermined significance level of 0.05. A significant difference was found among the materials in terms of the dynamic viscoelasticity. The materials containing citrate ester-based plasticizer ATBC showed the most stable dynamic viscoelasticity. Considering the limitations of this study, the results suggest that the inclusion of citrate ester-based plasticizer can improve the durability of dental soft polymer materials.

[Effect of porcelain thickness and substrate on optical properties of porcelain veneers for tetracycline stained teeth].

PURPOSE: To analyze the effect of porcelain layer thicknesses and substrates on color properties and translucency of IPS e.max LT porcelain laminate veneers used to restore tetracycline stained teeth. METHODS: Porcelain specimens with different core and veneer thickness (veneer/core thickness: 0.25 mm/0.25 mm, 0.50 mm/0.25 mm, 0.25 mm/0.50 mm, 0.50 mm/0.50 mm, and 0.25 mm/0.75 mm) were fabricated by heat-press layering technique. CIE L*a*b* parameters were measured under simulated tetracycline backgrounds and black and white backgrounds by a spectrophotometer, color differences ΔE001 between specimens on simulated tetracycline backgrounds and backgrounds themselves and ΔE002 between specimens on simulated tetracycline backgrounds and white background were calculated. The translucent parameter(TP) was also calculated. The data were submitted to statistical analysis with SPSS 17.0 software package. RESULTS: ΔE001 increased with increase of thickness of the core and veneer layer, but there was no significant difference between 0.25 mm and 0.50 mm core thickness groups with 0.50 mm veneer in thickness (P>0.01). Except for light grey, ΔE002 decreased over other substrates with increase of thickness of the core and veneer layer, but there was no significant difference between 0.50 mm and 0.75 mm core thickness groups with 0.25 mm veneer in thickness (P>0.01). Both ΔE001 and ΔE002 were significantly different over different substrates（P<0.01）. TP decreased as the increase of core and veneer thickness and TP was significantly different with different core and veneer thickness（P<0.01）. CONCLUSIONS: Both the core/veneer thickness and the substrate have significant influence on color matching and masking ability of IPS e.max LT porcelain laminate veneers used to restore tetracycline stained teeth. As for IPS e.max LT porcelain veneers, the color property was the best when yellowish tetracycline stained teeth were restored, while the light grey was worst. The thickness of core and veneer has significant influence on the translucency of porcelain laminate veneers.

The effect of crude drugs on the angiogenic property and dynamic viscoelasticity of PEMA-based soft polymer materials.

This study aimed to determine the effect of crude drugs on the dynamic viscoelasticity and angiogenic property of soft polymer materials, in vitro. Two kinds of polyethyl methacrylates, and crude drugs (Astragalus membranaceus Bunge [HQ] and Salvia miltiorrhiza Bunge [DS]) were used in their powdered forms. And, acetyl tributyl citrate and ethyl alcohol were used in the liquid form. The dynamic viscoelasticity of each specimen was measured after 0, 1, 3, 7, 14 and 28 days of immersion in distilled water. The CellPlayer angiogenesis PrimeKit assay was used to test angiogenesis. Significant differences in dynamic viscoelasticity were observed among the materials. Specimens containing 1 wt% HQ showed higher angiogenic activity than those containing 5 wt% and 10 wt% HQ, and DS. Our results suggest that the addition of low amounts of crude drugs to soft polymer materials may promote angiogenesis in human tissues.