Two {CuI[P4Mo6]2}-Based Coordination Polymers Incorporating In Situ Converted Tetrapyridyl Ligands for Trace Analysis of Nitrofuran Antibiotics.

Nitrofurans are important synthetic broad-spectrum antibacterial drugs with the basic structure of 5-nitrofuran. Due to their toxicity, it is essential to develop a sensitive sensor with strong anti-interference capabilities for their detection. In this work, two {P4Mo6O31}12--based compounds, [H4(HPTTP)]2{CuI[Mo12O24(OH)6(PO4)3(HPO4)(H2PO4)4]}·xH2O (x = 13 for (1), 7 for (2); HPTTP = 4,4',4″,4‴-(1H-pyrrole-2,3,4,5-tetrayl)tetrapyridine), exhibiting similar coordination but distinct stacking modes. Both compounds were synthesized and used for the electrochemical detection of nitrofuran antibiotics. The tetrapyridine-based ligand was generated in situ during assembly, and its potential mechanism was discussed. Composite electrode materials, formed by mixing graphite powder with compounds 1-2 and physically grinding them, proved to be highly effective in the electrochemical trace detection of furazolidone (FZD) and furaltadone hydrochloride (FTD·HCl) under optimal conditions. Besides, the possible electrochemical detection mechanisms of two nitro-antibiotics were studied.

[Liver targeting of compound liposomes mediated by glycyrrhetinic acid derivative receptor and its effect on hepatic stellate cells].

The 3-succinate-30-stearyl glycyrrhetinic acid(18-GA-Suc) was inserted into glycyrrhetinic acid(GA)-tanshinone Ⅱ_A(TSN)-salvianolic acid B(Sal B) liposome(GTS-lip) to prepare liver targeting compound liposome(Suc-GTS-lip) mediated by GA receptors. Next, pharmacokinetics and tissue distribution of Suc-GTS-lip and GTS-lip were compared by UPLC, and in vivo imaging tracking of Suc-GTS-lip was conducted. The authors investigated the effect of Suc-GTS-lip on the proliferation inhibition of hepatic stellate cells(HSC) and explored their molecular mechanism of improving liver fibrosis. Pharmacokinetic results showed that the AUC_(Sal B) decreased from(636.06±27.73) µg·h·mL~(-1) to(550.39±12.34) µg·h·mL~(-1), and the AUC_(TSN) decreased from(1.08±0.72) µg·h·mL~(-1) to(0.65±0.04) µg·h·mL~(-1), but the AUC_(GA) increased from(43.64±3.10) µg·h·mL~(-1) to(96.21±3.75) µg·h·mL~(-1). The results of tissue distribution showed that the AUC_(Sal B) and C_(max) of Sal B in the liver of the Suc-GTS-lip group were 10.21 and 4.44 times those of the GTS-lip group, respectively. The liver targeting efficiency of Sal B, TSN, and GA in the Suc-GTS-lip group was 40.66%, 3.06%, and 22.08%, respectively. In vivo imaging studies showed that the modified liposomes tended to accumulate in the liver. MTT results showed that Suc-GTS-lip could significantly inhibit the proliferation of HSC, and RT-PCR results showed that the expression of MMP-1 was significantly increased in all groups, but that of TIMP-1 and TIMP-2 was significantly decreased. The mRNA expressions of collagen-I and collagen-Ⅲ were significantly decreased in all groups. The experimental results showed that Suc-GTS-lip had liver targeting, and it could inhibit the proliferation of HSC and induce their apoptosis, which provided the experimental basis for the targeted treatment of liver fibrosis by Suc-GTS-lip.

Bioinspired Optical Flexible Cellulose Nanocrystal Films with Strain-Adaptive Structural Coloration.

Recent advances of photonic crystals are driven to mechanical sensors and smart wearable devices; however, for chiral photonic cellulose nanocrystal (CNC) materials, vivid structural coloration and reversible mechanochromism like chameleon skin remain a big challenge. Here, we report a ternary co-assembly and post-UV-irradiation polymerization strategy to develop flexible and elastic CNC composite films, which, notably, have naked-eye-visible brilliant structural colors and stretching-induced color change covering a broad wavelength region at a moderate deformation (like skin). By adjusting the stretching, the film is designed as a smart skin to adapt to surrounding environments for camouflage. This work offers a universal strategy for constructing biomimic optically functional cellulose skins.

Photonic Cellulose Films with Vivid Structural Colors: Fabrication and Selectively Chemical Response.

Recent advances in structural-color cellulose nanocrystal (CNC) materials have been made toward chemical sensing applications; however, such materials lack sufficient color chroma for naked-eye observation, and their selective recognition to given chemicals as well as the corresponding mechanism has rarely been reported. Here, a dopamine-infiltration and post-polymerization approach is proposed to construct vivid structural-color composite films. The chiral nematic structure of CNC enables the structural coloration, while the strong light absorption of the polymeric co-phase, polydopamine (PDA) enhances the color chroma and visibility. By controlling the PDA amount, the composite films can detect organic solvents quantitatively and selectively via visible color changes. From the viewpoint of the compatibility and similitude principle, notably, a critical solubility parameter distance (R0) between PDA and "active" solvents is defined with a three-dimensional Hansen solubility sphere; this well constructs a rule for the sensing selectivity of the chemochromic composite films. The findings pave the foundation for the design of colorimetric sensors with specifically testing objects.

[Preparation of tanshinone â ¡_A-glycyrrhetinic acid solid lipid nanoparticles and its inhibitory effect on acne].

The optimal prescription of tanshinone Ⅱ_A(TSN)-glycyrrhetinic acid(GA) solid lipid nanoparticles(GT-SLNs) was explored and evaluated in vivo and in vitro, and its effect on acne after oral administration was investigated. The preparation processing and prescription were optimized and verified by single factor and response surface methodology. The in vitro release of GA and TSN in GT-SLNs was determined by ultra-performance liquid chromatography(UPLC). The effect of GT-SLNs on acne was investigated by the levels of sex hormones in mice, ear swelling model, and tissue changes in sebaceous glands, and the pharmacokinetics was evaluated. The 24-hour cumulative release rates of GA and TSN in SLNs were 65.87%±5.63% and 36.13%±2.31% respectively. After oral administration of GT-SLNs and the mixture of GA and TSN(GT-Mix), the AUC_(0-t) and AUC_(0-∞) of TSN in GT-SLNs were 1.98 times and 4.77 times those in the GT-Mix group, respectively, and the peak concentration of TSN in the GT-SLNs group was 17.2 times that in the GT-Mix group. After intragastric administration of GT-SLNs, the serum levels of testosterone(T) and the ratio of testosterone to estradiol(T/E2) in the GT-SLNs group significantly declined, and the sebaceous glands of mice were atrophied to a certain extent. The results demonstrated that obtained GT-SLNs with good encapsulation efficiency and uniform particle size could promote the release of GA and TSN. GT-SLNs displayed therapeutic efficacy on acne manifested by androgen increase, abnormal sebaceous gland secretion, and inflammatory damage.

[Preparation and in vivo study of liposomes mediated by glycyrrhetinic acid derivative ligand 18-GA-Gly].

Based on the research of active liver targeting liposomes mediated by glycyrrhetinic acid ligand at home and abroad, this paper focuses on the liver targeting effect of liposomes mediated with 18-GA-Gly, a kind of glycyrrhetinic acid ligand. salvianolic acid B(Sal B)-tanshinone ⅡA (TSN)liposomes mediated by 18-GA-Gly as well as the liposomes with unmodified ligands were prepared by film dispersion-high pressure homogenization method, and then the particle size, potential, encapsulation efficiency and ligand binding rate were detected. Plasma samples of the heart, liver, spleen, lung and kidney tissues were taken at different time points after tail vein injections. The contents of Sal B and TSN in each sample were determined with UPLC methods and the liver targeting effect of 18-GA-Gly ligands was evaluated. The results showed that the particle size, potential, encapsulation efficiency and ligand binding rate met the basic requirements; in vivo targeting investigation results showed no difference between GLY-TS-Lip group and TS-Lip group. The liposomes mediated by glycyrrhetinic acid derivative ligand 18-GA-Gly can increase the peak concentration of Sal B and TSN in liver, but showed no significant liver targeting effect.

[Preliminary study on premixed materials of emulsion gel].

The purpose of this paper was to study the pre-mixed materials of emulsion gel. Accessories were screened and formula was designed with the most common use, low cost and simple process as the standards. Experiments were designed by central composite design-response surface methodology (ccd-rsm). 8.0.6 Trial Design-Expert was used for data processing and analysis, and subjective scores were used as the index to draw the three-dimensional effect surface and 2D contour maps. It was determined that the optimal ranges were A (carbomer 940)： 0.05-0.065 g; B (castor oil)： 1.00-1.12 mL; C (poly polysorbate-80)： 0.15 mL. The optimal formula was as follows： carbopol 0.057 5 g, castor oil 1.1 mL, polysorbate-80 0.15 mL. The formulated substrate was studied on its preliminary stability and rheology characteristics, such as viscosity and thixotropy. Then with the optimal formula as substrate, emulsion type gel was prepared respectively with 98% rutin, 98% berberine hydrochloride, and 98% berbamine hydrochloride as the main component. With 0.9% normal saline as the absorption solution, the results showed that the ransdermal flux of the three formulations of 1 h was all less than 1%. The results indicated that this substrate had the potential to be developed into a premixed material. The emulsion type gel matrix made from this formula had a good appearance, stability to certain extent, appropriate viscosity and thixotropy, and showed no skin irritation in 1 h.

A pH-responsive chitosan-b-poly(p-dioxanone) nanocarrier: formation and efficient antitumor drug delivery.

Increasing attention has recently been paid to the fabrication of drug delivery systems with excellent cell internalization and intracellular drug release properties. In this study, an amphiphilic block copolymer of chitosan was synthesized for the first time, which can self-assemble into micelles in a neutral aqueous solution but partially disassemble in an acidic endosomal/lysosomal environment. The antitumor drug, camptothecin (CPT), was encapsulated in the cores of the micelles for tumor cell therapy. In vitro drug release studies demonstrated that the micelles presented a much faster release of CPT at pH 5.0 than at pH 7.4. Blank micelles were found to be nontoxic in preliminary in vitro cytotoxicity assays. Cell experiments showed that the CPT-loaded micelles could be effectively internalized by Hela cells and accomplished a potent antitumor cell efficacy, indicating that the chitosan-based micelles might be an attractive new platform for efficient intracellular drug delivery.

A cellulose nanocrystal templating approach to synthesize size-controlled gold nanoparticles with high catalytic activity.

Advanced templating methods have shown precise regulation of the micro/nanostructures of inorganic catalysts. Here, on the basis of controlled self-assembly and micro-structures of cellulose nanocrystals (CNCs), a new bio-mass-mediated templating approach is proposed to control the growth of gold nanoparticles (Au NPs). The catalytic performance of the as-prepared Au NPs was evaluated using p-nitrophenol as a model pollutant. TEM, POM, zeta-potential, and rheological measurements were conducted to investigate the structure and catalytic activity of the nano-materials. By regulating the chiral nematic liquid crystal texture formed by the self-assembly of CNCs, the size of Au NPs could be adjusted at the nanoscale dimension, from 1.38 ± 0.38 nm to 4.25 ± 1.24 nm. Depending on the Au size, a high catalytic effect, namely, 98.0% conversion rate, was obtained within 30 min. The conversion rate was maintained at 97.0% even after 3-run cyclic application. Such findings demonstrate the potential of using CNCs as a bio-template to control the growth of nanomaterials.

Thermoformable and transparent one-component nanocomposites based on surface grafted cellulose nanofiber.

One-component nanocomposites based on poly(methyl methacrylate)(PMMA) and polystyrene (PS) grafted cellulose nanofiber (CNF) with high polymer graft percentage were fabricated. At relative ambient conditions, less active vinyl monomer, MMA, and styrene were grafted from CNF via surface-initiated Cu(0)-mediated reversible deactivation radical polymerizations (RDRP), and PMMA/PS grafted CNFs could reach a graft percentage as high as 7550 % and 3530 %, respectively. The one-component composite films were manufactured by simple hot-pressing subsequentially. Optical transparency, thermal stability, and glass transition temperature of one-component nanocomposites were enhanced dramatically in contrast with the bicomponent nanocomposite. The uniform fracture surface confirmed the uniform dispersity by morphological observation. Mechanical tests indicated that break elongation and tensile strength ascended notably, and tensile modulus slightly descended as the graft percentage increased for PS and PMMA grafted CNF one-component composite. It was concluded that for glassy graft chains, obtaining one-component nanocomposites with high enough graft chain length was essential to achieve moderated mechanical performance without compromising optical properties and thermal manufacturing ability.

Biodegradable soy protein isolate-based materials: a review.

Recently, there is an increasing interest of using bio-based polymers instead of conventional petroleum-based polymers to fabricate biodegradable materials. Soy protein isolate (SPI), a protein with reproducible resource, good biocompatibility, biodegradability, and processability, has a significant potential in the food industry, agriculture, bioscience, and biotechnology. Up to now, several technologies have been applied to prepare SPI-based materials with equivalent or superior physical and mechanical properties compared with petroleum-based materials. The aim of this review is focused on discussion of the advantages and limitations of native SPI as well as the bulk and surface modification strategies for SPI. Moreover, some applications of SPI-based materials, especially for food preservation and packaging technology, were discussed.

Synthesis, structure, and photoluminescent properties of metal-organic coordination polymers assembled with bithiophenedicarboxylic acid.

Four novel metal-organic coordination polymers with the formulas Mn(3)(btdc)(3)(DMF)(4) (1), Co(btdc)(DMF)(3) (2), Zn(btdc)(DMF)(3) (3), and Zn(btdc)(4,4'-bpy)(0.5) (4), where H(2)btdc = 2,2'-bithiophene-5,5'-dicarboxylic acid, DMF = N,N'-dimethylformamide, and 4,4'-bpy = 4,4'-bipyridine, have been successfully synthesized. Crystal 1 with Mn(2+) as the cation features a three-dimensional (3D) infinite framework built from trimanganese clusters, and crystals 2 and 3 with Co(2+) and Zn(2+), respectively, as the cation both have one-dimensional zigzag polymeric coordination chains. Crystal 4 synthesized using a mixture of 4,4'-bpy and H(2)btdc exhibits a triply interpenetrating 3D framework built from a dizinc paddlewheel second building unit with a distorted primitive cubic single net. The results of UV/vis spectra indicate that metal binding does not disturb the detailed electronic structure of the ligand. We also demonstrate that Zn(2+) can greatly enhance the luminescence emission of the H(2)btdc ligand, and the emission intensity of crystal 4 is almost 20 times higher than that of the free H(2)btdc ligand. Steady-state and time-resolved spectroscopic measurement reveal that the more rigid environment of the btdc ligand can stabilize the highly excited long-lived states in metal-organic frameworks (MOFs), which thus greatly changes the emission properties of MOFs.

A fully bio-based composite coating with mechanical robustness and dual superlyophobicity for efficient two-way oil/water separation.

Recently, two-way oil/water separation materials bearing both "water-removing" and "oil-removing" functions are of great interest for treating environmental water pollution. Despite having switchable surface wettability, these materials are generally designed to possess superhydrophilicity in air, which, standing on the viewpoint of thermodynamics, is unstable and easy to lose the superwetting property. Concerning the full exploitation of sustainable biomass resources, herein, we use soy protein and ramie fiber to fabricate a cross-linked biocomposite whose amphiphilicity can be tuned by introducing a low surface-energy agent, octadecylamine. The resultant composite can be used as a coating for stainless steel meshes, preparing stably hydrophobic surface in air as well as achieving dual superlyophobicity under liquid that is required for efficiently separating light and heavy oils from water. Furthermore, a high separation efficiency is acquired for both light oil/water and heavy oil/water mixtures during cyclicusage. Notably, the fully bio-based coating displays high resistance against mechanical abrasion and harsh chemical corrosions (acid, alkaline, and salt) without losing high separation efficiency, indicating the potential application of such material in oily wastewater treatment.

Structure and properties of soy protein/poly(butylene succinate) blends with improved compatibility.

A novel environmentally friendly thermoplastic soy protein/polyester blend was successfully prepared by blending soy protein isolate (SPI) with poly(butylene succinate) (PBS). To improve the compatibility between SPI and PBS, the polyester was pretreated by introducing different amounts of urethane and isocyanate groups before blending. The blends containing pretreated PBS showed much finer phase structures because of good dispersion of polyester in protein. Consequently, the tensile strength and modulus of blends increased obviously. A lower glass transition temperature of protein in the blends than that of the pure SPI, which was caused by the improvement of the compatibility between two phases, was observed by dynamic mechanical analyzer (DMA). The hydrophobicity, water resistance, and moisture absorption at different humidities of the blends were modified significantly due to the incorporation of PBS.

The current strategy of repair of tetralogy of Fallot in children and adults.

OBJECTIVES: The strategies of repair of tetralogy of Fallot change with the age of patients. In children older than 4 years and adults, the optimal strategy may be to use different method of reconstruction of the right ventricular outflow tract from those followed in younger children, so as to avoid, or reduce, the pulmonary insufficiency that is increasingly known to compromise right ventricular function. METHODS: From April, 2001, through May, 2008, we undertook complete repair in 312 patients, 180 male and 132 female, with a mean age of 11.3 years +/-0.4 years, and a range from 4 to 48 years, with typical clinical and morphological features of tetralogy of Fallot, including 42 patients with the ventriculo-arterial connection of double outlet right ventricle. The operation was performed under moderate hypothermia using blood cardioplegia. The ventricular septal defect was closed with a Dacron patch. When it was considered necessary to resect the musculature within the right ventricular outflow tract, or perform pulmonary valvotomy, we sought to preserve the function of the pulmonary valve by protecting as far as possible the native leaflets, or creating a folded monocusp of autologous pericardium. RESULTS: The repair was achieved completely through right atrium in 192, through the right ventricular outflow tract in 83, and through the right atrium, the outflow tract, and the pulmonary trunk in 36 patients. A transjunctional patch was inserted in 169 patients, non-valved in all but 9. There were no differences regarding the periods of aortic cross-clamping or cardiopulmonary bypass. Of the patients, 5 died (1.6%), with no influence noted for the transjunctional patch. Of those having a non-valved patch inserted, three-tenths had pulmonary regurgitation of various degree, while those having a valved patch had minimal pulmonary insufficiency and good right ventricular function postoperatively, this being maintained after follow-up of 8 to 24-months. CONCLUSIONS: Based on our experience, we suggest that the current strategy of repair of tetralogy of Fallot in older children and adults should be based on minimizing the insertion of transjunctional patches, this being indicated only in those with very small ventriculo-pulmonary junctions. If such a patch is necessary, then steps should be taken to preserve the function of the pulmonary valve.

Biomimetic Optical Cellulose Nanocrystal Films with Controllable Iridescent Color and Environmental Stimuli-Responsive Chromism.

As a wise and profound teacher, nature provides numerous creatures with rich colors to us. To biomimic structural colors in nature as well as color changes responsive to environmental stimuli, there is a long way to go for the development of free-standing photonic films from natural polymers. Herein, a highly flexible, controllably iridescent, and multistimuli-responsive cellulose nanocrystal (CNC) film is prepared by simply introducing a small molecule as both plasticizer and hygroscopic agent. The presence of the additive does not block the self-assembly of CNC in aqueous solution but results in the enhancement of its mechanical toughness, making it possible to obtain free-standing iridescent CNC films with tunable structural colors. In response to environmental humidity and mechanical compression, such films can change structural colors smoothly by modulating their chiral nematic structures. Notably, the chromism is reversible by alternately changing relative humidity between 16 and 98%, mimicking the longhorn beetle Tmesisternus isabellae. This chromic effect enables various applications of the biofilms in colorimetric sensors, anticounterfeiting technology, and decorative coatings.

In vitro degradation of biodegradable blending materials based on poly(p-dioxanone) and poly(vinyl alcohol)-graft-poly(p-dioxanone) with high molecular weights.

Amphiphilic biodegradable graft copolymer, poly(vinyl alcohol)-graft-poly(p-dioxanone) (PVA-g-PPDO), was used to prepare a new biodegradable material by blending with poly(p-dioxanone) (PPDO). The in vitro degradation properties of the copolymer and blends with different contents of PVA-g-PPDO were studied in phosphate buffer at 37 degrees C. The degradation processes of the PVA-g-PPDO and its blends with the PPDO were monitored by weight loss, viscosimetry, water uptake, differential scanning calorimetry (DSC), and scanning electron microscopy. The results of inherent viscosity and weight loss reveal that the PVA-g-PPDO has a different in vitro degradation behavior from that of PPDO, and the introducing of copolymer into the blending system may enhance the degradability of PPDO when the contents of copolymer is higher than 5%. The change of the degree of crystallization (Dc) of copolymer and blends derived from the DSC also shows that the copolymer and blends have faster degradation rates than the neat PPDO during the testing period. A degradation mechanism of the blends was postulated based on the results of the weight retention, inherent viscosity measurement, and DSC.

"AND" logic gate regulated pH and reduction dual-responsive prodrug nanoparticles for efficient intracellular anticancer drug delivery.

A dual-responsive drug delivery system simulating an AND logic gate is developed by core-cross-linking of a disulfide-containing anticancer prodrug with Cu(2+) for safe and efficient delivery of anticancer drugs. These prodrug nanoparticles are stable and exhibit nearly no premature drug release, and allow a fast drug release under simulated intracellular conditions, realizing a precise drug delivery towards cell nuclei.

Bamboo (Neosinocalamus affinis)-based thin film, a novel biomass material with high performances.

Exploration of biomass based materials to replace conventional petroleum based ones has been a trend in recent decades. In this work, bamboo (Neosinocalamus affinis) with abundant resources was used for the first time to prepare films in the presence of cellulose. The effects of weight ratio of bamboo/cellulose on the appearances and properties of the films were investigated. It was confirmed there existed strong interactions between bamboo and cellulose, which were favorable to formation of homogeneous structure of blend films. Particularly, the presence of bamboo could improve the surface hydrophobicity, water resistance and thermal stability of blend films, and the films possessed an excellent oxygen barrier property, compared with generally used commercial packaging films. The bamboo biomass, therefore, is successfully used to create a new film material with a good application prospect in the fields of packaging, coating, and food industry.

Comparison of degradation behavior and the associated bone response of ZK60 and PLLA in vivo.

The aim of this study was to investigate whether ZK60, an extruded magnesium alloy, reacts in vivo with an appropriate host response, and to investigate how microarc oxidation treatment influences this in vivo corrosion behavior. Twelve cylinders were machined from as-extruded ZK60, with six cylinders treated with MAO and six left untreated; poly-l-lactic acid pins were used as a control to compare biocompatibility. These cylinders were implanted into the right distal femur of mice along the transepicondylar axis from the medial condyle. Microcomputerized tomography was used to quantitatively analyze corrosion in a nondestructive manner in vivo and the corrosion rate was calculated based on the volume measurements of the residual implants. The physiological response of the rats postimplantation was obtained by clinical observation and blood biochemical analysis. Histological analyses of the soft tissue around the implants were used to assess bone response in relation to the implants. The results obtained clearly indicate that the untreated ZK60 alloy showed high degradation rates in vivo, and that MAO treatment had a significant but unsatisfying effect on protecting the implant from further corrosion. Compared with PLLA, the ZK60 alloy showed good osteoconductivity and osteoinductivity, and, according to biochemical indicators, had good biocompatibility in vivo.