Synergetic delivery of artesunate and isosorbide 5-mononitrate with reduction-sensitive polymer nanoparticles for ovarian cancer chemotherapy.

Ovarian cancer is a highly fatal gynecologic malignancy worldwide. Chemotherapy remains the primary modality both for primary and maintenance treatments of ovarian cancer. However, the progress in developing chemotherapeutic agents for ovarian cancer has been slow in the past 20 years. Thus, new and effective chemotherapeutic drugs are urgently needed for ovarian cancer treatment. A reduction-responsive synergetic delivery strategy (PSSP@ART-ISMN) with co-delivery of artesunate and isosorbide 5-mononitrate was investigated in this research study. PSSP@ART-ISMN had various effects on tumor cells, such as (i) inducing the production of reactive oxygen species (ROS), which contributes to mitochondrial damage; (ii) providing nitric oxide and ROS for the tumor cells, which further react to generate highly toxic reactive nitrogen species (RNS) and cause DNA damage; and (iii) arresting cell cycle at the G0/G1 phase and inducing apoptosis. PSSP@ART-ISMN also demonstrated excellent antitumor activity with good biocompatibility in vivo. Taken together, the results of this work provide a potential delivery strategy for chemotherapy in ovarian cancer.

Resonant-Cantilever-Detected Kinetic/Thermodynamic Parameters for Aptamer-Ligand Binding on a Liquid-Solid Interface.

Nucleic acid aptamers have been widely used as recognition elements on various biosensing interfaces, but quantitative kinetic/thermodynamic analysis for revealing the aptamer-ligand binding mechanism, which occurs on a liquid-solid interface, has not been realized due to a lack of usable biophysical tools. Herein we apply a resonant microcantilever sensor to continuously record the frequency shift according to the binding-induced mass change on the liquid-solid interface. The frequency-shift curve is used for tracing the reaction process and is fitted with classic equations to calculate a set of kinetic/thermodynamic parameters, such as rate constants (ka = 902.95 M-1 s-1, kd = 0.000141 s-1), equilibrium constants (KD = 1.55 µM), the Gibbs free energy (ΔG° = -32.57 kJ/mol), and the activation energy (Ea = 38.03 kJ/mol) for the immobilized aptamer and free ATP. This quantitative analysis method is label-free, calibration-free, and highly sensitive. The kinetic/thermodynamic parameter detection method provides new resolution to the in-depth understanding of the ligand-aptamer interaction on the liquid-solid interface for biosensing or lab-on-a-chip applications.

New Insights on the Structure of Electrochemically Deposited Lithium Metal and Its Solid Electrolyte Interphases via Cryogenic TEM.

Lithium metal has been considered the "holy grail" anode material for rechargeable batteries despite the fact that its dendritic growth and low Coulombic efficiency (CE) have crippled its practical use for decades. Its high chemical reactivity and low stability make it difficult to explore the intrinsic chemical and physical properties of the electrochemically deposited lithium (EDLi) and its accompanying solid electrolyte interphase (SEI). To prevent the dendritic growth and enhance the electrochemical reversibility, it is crucial to understand the nano- and mesostructures of EDLi. However, Li metal is very sensitive to beam damage and has low contrast for commonly used characterization techniques such as electron microscopy. Inspired by biological imaging techniques, this work demonstrates the power of cryogenic (cryo)-electron microscopy to reveal the detailed structure of EDLi and the SEI composition at the nanoscale while minimizing beam damage during imaging. Surprisingly, the results show that the nucleation-dominated EDLi (5 min at 0.5 mA cm-2) is amorphous, while there is some crystalline LiF present in the SEI. The EDLi grown from various electrolytes with different additives exhibits distinctive surface properties. Consequently, these results highlight the importance of the SEI and its relationship with the CE. Our findings not only illustrate the capabilities of cryogenic microscopy for beam (thermal)-sensitive materials but also yield crucial structural information on the EDLi evolution with and without electrolyte additives.

Tunnelling conductive hybrid films of gold nanoparticles and cellulose and their applications as electrochemical electrodes.

Conductive hybrid films of metal nanoparticles and polymers have practical applications in the fields of sensing, microelectronics and catalysis, etc. Herein, we present the electrochemical availability of tunnelling conductive hybrid films of gold nanoparticles (GNPs) and cellulose.The hybrid films were provided with stable tunnelling conductive properties with 12 nm GNPs of 12.7% (in weight). For the first time, the conductive hybrid films were used as substrates of electrochemical electrodes to load calmodulin (CaM) proteins for sensing of calcium cations.The electrodes of hybrid films with 20 nm GNPs of 46.7% (in weight) exhibited stable electrochemical properties, and showed significant responses to calcium cations with concentrations as low as 10(−9) M after being loaded with CaM proteins.

Repairing cartilage defects with bone marrow mesenchymal stem cells induced by CDMP and TGF-ß1.

The aim of this study was to explore the ability for chondrogenic differentiation of bone marrow mesenchymal stems cells (BMSCs) induced by either cartilage-derived morphogenetic protein 1 (CDMP-1) alone or in the presence of transforming growth factor-ß1 (TGF-ß1) in vivo and in vitro. BMSCs and poly-lactic acid/glycolic acid copolymer (PLGA) scaffold were analyzed for chondrogenic capacity induced by CDMP-1 and TGF-ß1 in vivo and in vitro. Chondrogenic differentiation of BMSCs into chondrocytes using a high density pellet culture system was tested, whether they could be maintained in 3-D PLGA scaffold instead of pellet culture remains to be explored. Under the culture of high-density cell suspension and PLGA frame, BMSCs were observed the ability to repair cartilage defects by either CDMP-1 alone or in the presence of TGF-ß1 in vitro. Then the cell-scaffold complex was implanted into animals for 4 and 8 weeks for in vivo test. The content of collagen type II and proteoglycan appeared to increase over time in the constructs of the induced groups (CDMP in the presence of TGF-ß1), CDMP group and TGF group. However, the construct of the control group did not express them during the whole culture time. At 4 and 8 weeks, the collagen type II expression of the induced group was higher than the sum of TGF group and CDMP group by SSPS17.0 analysis. BMSCs and PLGA complex induced by CDMP-1 and TGF- ß1 can repair cartilage defects more effectively than that induced by CDMP-1 or TGF-ß1 only.

[Anti-tumor effects of DDP-PLLA-CNTs on human cholangiocarcinoma cell line in vitro].

OBJECTIVE: To explore the antitumor effects of DDP-PLLA-CNTs on human cholangiocarcinoma cell line. METHODS: DDP-PLLA-CNTs were prepared with the method of ultrasound emulsification. The morphology of DDP-PLLA-CNTs was determined by scanning electron microscope (SEM). And its drug loading and drug release curve in vitro was detected by UV-Vis-NIR spectrophotometer. CCK8 was used to test the cytotoxic effects of DDP-PLLA-CNTs at different concentrations on QBC939 cell proliferation.Flow cytometry was employed to measure the changes of apoptotic rate. RESULTS: With excellent controlled-release characteristic of in vitro drug release, DDP-PLLA-CNTs inhibited the proliferation and significantly increased the apoptotic rate of QBC939 cell line. CONCLUSION: DDP-PLLA-CNTs have drug sustained-release characteristics and can significantly inhibit the proliferation of QBC939 cell line.

Machine learning-aided unveiling the relationship between chemical pretreatment and methane production of lignocellulosic waste.

Chemical pretreatment is a common method to enhance the cumulative methane yield (CMY) of lignocellulosic waste (LW) but its effectiveness is subject to various factors, and accurate estimation of methane production of pretreated LW remains a challenge. Here, based on 254 LW samples, a machine learning (ML) model to predict the methane production performance of pretreated feedstock was constructed using two automated ML platforms (tree-based pipeline optimization tool and neural network intelligence). Furthermore, the interactive effects of pretreatment conditions, feedstock properties, and digestion conditions on methane production of pretreated LW were studied through model interpretability analysis. The optimal ML model performed well on the validation set, and the digestion time, pretreatment agent, and lignin content (LC) were found to be key factors affecting the methane production of pretreated LW. If the LC in the raw LW was lower than 15%, the maximum CMY might be achieved using the NaOH, KOH, and alkaline hydrogen peroxide (AHP) with concentrations of 3.8%, 4.4%, and 4.5%, respectively. On the other hand, if LC was higher than 15%, only high concentrations of AHP exceeding 4% could significantly increase methane production. This study provides valuable guidance for optimizing pretreatment process, comparing different chemical pretreatment approaches, and regulating the operation of large-scale biogas plants.

Complete Prevention of Bubbles in a PDMS-Based Digital PCR Chip with a Multifunction Cavity.

In a chamber-based digital PCR (dPCR) chip fabricated with polydimethylsiloxane (PDMS), bubble generation in the chambers at high temperatures is a critical issue. Here, we found that the main reason for bubble formation in PDMS chips is the too-high saturated vapor pressure of water at an elevated temperature. The bubbles should be completely prevented by reducing the initial pressure of the system to under 13.6 kPa to eliminate the effects of increased-pressure water vapor. Then, a cavity was designed and fabricated above the PCR reaction layer, and Parylene C was used as a shell covering the chip. The cavity was used for the negative generator in sample loading, PDMS degassing, PCR solution degassing in the digitization process and water storage in the thermal reaction process. The analysis was confirmed and finally achieved a desirable bubble-free, fast-digitization, valve-free and no-tubing connection dPCR.

Enhanced humification via lignocellulosic pretreatment in remediation of agricultural solid waste.

Stover and manure are the main solid waste in agricultural industry. The generation of stover and manure could lead to serious environmental pollution if not handled properly. Composting is the potential greener solution to remediate and reduce agricultural solid waste, through which stover and manure could be remediated and converted into organic fertilizer, but the long composting period and low efficiency of humic substance production are the key constraints in such remediation approach. In this study, we explore the effect of lignocellulose selective removal on composting by performing chemical pretreatment on agricultural waste followed by utilization of biochar to assist in the remediation by co-composting treatment and reveal the impacts of different lignocellulose component on organic fertilizer production. Aiming to discover the key factors that influence humification during composting process and improve the composting quality as well as comprehensive utilization of agricultural solid waste. The results demonstrated that the removal of selective lignin or hemicellulose led to the shift of abundances lignocellulose-degrading bacteria, which in turn accelerated the degradation of lignocellulose by almost 51.2%. The process also facilitated the remediation of organic waste via humification and increased the humic acid level and HA/FA ratio in just 22 days. The richness of media relies on their lignocellulose content, which is negatively correlated with total nitrogen content, humic acid (HA) content, germination index (GI), and pH, but positively correlated with fulvic acid (FA) and total organic carbon (TOC). The work provides a potential cost effective and efficient framework for agricultural solid waste remediation and reduction.

Calibration of discrete element parameters for simulating wheat crushing.

The mechanical properties of wheat grains were measured and analyzed using discrete element software, which provided crucial data for their processing in a mill. The foundational Hertz-Mindlin model was used as a theoretical framework to evaluate the accumulation angle of wheat grains. The Plackett-Burman, steepest ascent, and Box-Behnken methods were utilized in a series of experiments, with the accumulation angle serving as the dependent variable. Targeting the actual angle of repose in the response surface, the optimal parameters were derived using the regression equations. These included a static-friction coefficient of 0.3 between individual wheat grains, rolling-friction coefficient of 0.04 for wheat-wheat interactions, static-friction coefficient of 0.554 for wheat-tooth roller interactions, collision recovery coefficient of 0.5 for wheat-wheat collisions, collision recovery coefficient of 0.45 for wheat-tooth roller collisions, and rolling-friction coefficient of 0.05 for wheat-roller interactions. Relying on the bonding contact model of Hertz-Mindlin, virtual uniaxial compression tests were conducted to calibrate the wheat grain bonding parameters. A regression equation for the critical load was subsequently generated using the critical load of the wheat grain bonding model as the response variable. The optimal parameters were calculated and incorporated into the EDEM model for computation, which resulted in a relative error of 1.6% between the calculated and observed values, confirming the accuracy and feasibility of the calibration method, suggesting that the calibrated parameters were accurate.

Glutamine metabolism targeting liposomes for synergistic chemosensitization and starvation therapy in ovarian cancer.

Platinum-based chemotherapy is a first-line therapeutic regimen against ovarian cancer (OC); however, the therapeutic potential is always reduced by glutamine metabolism. Herein, a valid strategy of inhibiting glutamine metabolism was proposed to cause tumor starvation and chemosensitization. Specifically, reactive oxygen species-responsive liposomes were developed to co-deliver cisplatin (CDDP) and bis-2-(5-phenylacetamido-1,3,4-thiadiazol-2-yl) ethyl sulfide (BPTES) [C@B LPs]. The C@B LPs induced effective tumor cell starvation and significantly sensitized OC cells to CDDP by reducing glutathione generation to prevent CDDP detoxification, suppressing ATP production to avoid CDDP efflux, hindering nucleotide synthesis to aggravate DNA damage induced by CDDP, and blocking mammalian target of rapamycin (mTOR) signaling to promote cell apoptosis. More importantly, C@B LPs remarkably inhibited tumor growth in vivo and reduced the side effects. Taken together, this study provided a successful strategy of synergistic chemosensitization and starvation therapy escalating the rate of therapeutic success in OCs. STATEMENT OF SIGNIFICANCE: This work proposed a valid strategy of inhibiting glutamine metabolism to cause tumor starvation and chemosensitization. Specifically, ROS-responsive liposomes were developed to co-deliver cisplatin CDDP and BPTES [C@B LPs]. The C@B LPs induced effective tumor cell starvation and significantly sensitized OC cells to cisplatin by reducing glutathione generation to prevent cisplatin detoxification, suppressing ATP production to avoid cisplatin efflux, hindering nucleotide synthesis to aggravate DNA damage induced by cisplatin, and blocking mTOR signaling to promote cell apoptosis. More importantly, C@B LPs remarkably inhibited tumor growth in vivo and reduced the side effects. Taken together, this study provided a successful strategy of synergistic chemosensitization and starvation therapy escalating the rate of therapeutic success in OCs.

Broadband near-infrared emission in Tm3+-Dy3+ codoped amorphous chalcohalide films fabricated by pulsed laser deposition.

Structural and near-infrared (NIR) emission properties were investigated in the Tm(3+)-Dy(3+) codoped Ge-Ga-based amorphous chalcohalide films fabricated by pulsed laser deposition. The homogeneous films illustrated similar random network to the glass target according to the measurements of X-ray diffraction, X-ray photoelectron spectroscopy, and Raman spectroscopy. An 808 nm laser diode pumping generated a superbroadband NIR emission ranging from 1050 to 1570 nm and the other intense broadband NIR emission centered at ~1800 nm, which was attributed to the efficient energy transfer from Tm(3+) to Dy(3+) ions. This was further verified by the broad-range excitation measurements near the Urbach optical-absorption edge involved defect states. The results shed light on the potential highly integrated planar optical device applications of the codoped amorphous chalcohalide films.

[Study on osteogenesis and angiogenesis of Pluronic F-127 composite gel loaded with transforming growth factor ß 3 and bone marrow mesenchymal stem cells in rabbit maxillary sinus lift].

OBJECTIVE: To prepare Pluronic F-127 composite gel loaded with transforming growth factor ß 3 (TGF-ß 3) and bone marrow mesenchymal stem cells (BMSCs) and observe its osteogenesis and angiogenesis effects in vivo and in vitro. METHODS: BMSCs were isolated from the tibial and femoral bone marrow of New Zealand white rabbits and passaged, and the 3rd generation cells were used for subsequent experiments after identification of osteogenic and adipogenic induction. Pluronic F-127 powder and TGF-ß 3 were dissolved in L-DMEM medium to prepare Pluronic F-127 gel, TGF-ß 3+Pluronic F-127 gel, BMSCs+Pluronic F-127 gel, and TGF-ß 3+BMSCs+Pluronic F-127 gel. The 3rd generation of BMSCs were cultured with L-DMEM medium (group A), osteogenic induction medium (group B), osteogenic induction medium containing Pluronic F-127 gel (group C), and osteogenic induction medium containing TGF-ß 3+Pluronic F-127 gel (group D), respectively. After 14 days of culturing, alkaline phosphatase (ALP) staining and Alizarin red staining were used to observe the osteogenesis. In addition, the BMSCs were cultured with L-DMEM medium containing Pluronic F-127 gel (experimental group) and L-DMEM medium (control group) for 1, 2, 3, and 4 days, respectively. And the cell proliferation was detected by MTT assay. Ten New Zealand white rabbits were taken to prepare the maxillary sinus lift models, and Pluronic F-127 gel (group A), TGF-ß 3+Pluronic F-127 gel (group B), BMSCs+Pluronic F-127 gel (group C), and TGF-ß 3+BMSCs+Pluronic F-127 gel (group D) were injected into the bone defects, respectively. On the 8th week, imaging examination and HE staining were used to observe the formation of new bone, immunohistochemical staining was used to observe the expression of vascular endothelial growth factor (VEGF) and bone morphogenetic protein 2 (BMP-2) in bone tissue, and Western blot was used to detect the relative expressions of VEGF, oncostatin M (OSM), and BMP-4 proteins in bone tissue. RESULTS: Osteogenic and adipogenic induction identified the isolated and cultured cells as BMSCs. In vitro staining showed that ALP activity and Alizarin red concentration in group D were significantly higher than those in other groups ( P<0.05). MTT assay showed that the absorbency ( A) value of the two groups increased gradually, and there was no significant difference between the groups at each time point ( P>0.05). In vivo experimental imaging examination showed that the bone mineral density and osteogenic continuity of group D were the best, and the proportion of new bone volume was superior to other groups ( P<0.05). HE staining showed that compared with other groups, bone trabeculae in group D were dense and arranged regularly, on which a large number of osteoblasts and osteoclasts were distributed, and a large number of new bone formation could be seen. Immunohistochemical staining showed the strong positive expressions of BMP-2 and VEGF in group D ( P<0.05); Western blot detection showed that the relative expressions of VEGF, OSM, and BMP-4 proteins in group D were significantly higher than those in other groups ( P<0.05). CONCLUSION: The BMSCs in Pluronic F-127 composite gel loaded with TGF-ß 3 and BMSCs can be induced to differentiate into osteoblasts, and the composite gel has no toxic effect on cells, and has obvious osteogenesis and angiogenesis in the maxillary sinus of rabbits.

Eco-friendly ionic liquid imprinted polymer based on a green synthesis strategy for highly selective adsorption tylosin in animal muscle samples.

A novel eco-friendly molecularly imprinted polymer (MIP) was proposed as solid-phase extraction (SPE) adsorbent to selective adsorption tylosin (TYL) in animal muscle samples. The MIP was synthesized in aqueous by using 1,4-butanediyl-3,3-bis-1-vinyl imidazolium chloride and 2-acrylamide-2-methylpropanesulfonic acid as bifunctional monomer. The obtained MIP had excellent selectivity towards TYL in water, and the maximum binding capacity can reach 123.45 mg g-1. Combined with high-performance liquid chromatography, the presented MIP can be used as SPE sorbent to recognize and detect TYL in the range of 0.008 to 0.6 mg L-1 (R2 = 0.9995). The limit of detection and limit of quantification were 0.003 mg L-1 and 0.008 mg L-1, and the intraday and interday precision were 1.05% and 3.36%, respectively. Under the optimal condition, the established MIP-SPE-HPLC method was successfully applied to separate and determine trace TYL in chicken, pork, and beef samples with satisfactory recoveries ranged from 94.0 to 106.3%, and the MIP-SPE cartridge can be cycled at least 20 times. This study implies a promising green MIP-SPE-HPLC method for highly selective adsorption and analysis trace TYL in complex matrices.

2-Mercaptoethanol (2-ME)-based IATs or Polybrene method mitigates the interference of daratumumab on blood compatibility tests.

OBJECTIVES: Treating red blood cells (RBCs) with dithiothreitol (DTT) is a wildly-recommended to overcome the interference of the daratumumab (DARA) with blood compatibility testing. Nevertheless, DTT can be hard to obtain in the clinical laboratory, while its use in routine practice may be time-consuming. In the following study, we explored the feasibility of using a commercial 2-mercaptoethanol (2-ME) working solution or the time-saving Polybrene method to mitigate DARA interference. METHODS: Antibody screening and cross-matching were performed using 2-ME or DTT-based indirect antiglobulin tests (IATs) and Polybrene method (with human IgG anti-E same IATs titer as DARA as positive control) on 37 samples. Most clinically important blood group antigens on RBCs were detected after treatment with 2-ME or DTT. RESULTS: Treating RBCs with 2-ME eliminates the DARA interference with the antibody screening or cross-matching; yet, K antigen is denatured during treatment. DARA does not interfere with antibody screening and cross-matching via Polybrene method, while 2+ agglutinations of anti-E antibody with the same titer (IATs method) as DARA could be observed in the positive controls via this method. CONCLUSION: 2-ME-based IATs or Polybrene method could replace DTT-based IATs to mitigate DARA interference.

A novel GSH-triggered polymeric nanomicelles for reversing MDR and enhancing antitumor efficiency of hydroxycamptothecin.

Tumor multidrug resistance (MDR) is one of the main reasons for the failure of clinical chemotherapy. Here, a bio-responsive anti-drug-resistant polymer micelle that can respond to the reductive GSH in the tumor microenvironment (TME) for delivery of HCPT was designed. A new type of polymer with anti-drug resistance and anti-tumor effect was synthesized and used to encapsulated HCPT to form reduction-sensitive micelles (PDSAH) by a thin-film dispersion method. It is demonstrated that the micelle formulation improves the anti-tumor activity and biosafety of HCPT, and also plays a significant role in reversing the drug resistance, which contributes to inhibiting the tumor growth and prolonging the survival time of H22 tumor-bearing mice. The results indicate that this nanoplatform can serve as a flexible and powerful system for delivery of other drugs that are tolerated by tumors or bacteria.

Endovascular treatment of congenital brain arteriovenous fistulas with combination of detachable coils and onyx liquid embolic agent.

INTRODUCTION: Congenital brain arteriovenous fistulas (BAVFs) are rare vascular lesions, and conservative management was associated with a high mortality rate. We report our experience in the treatment of congenital BAVFs using detachable coils and Onyx liquid embolic agent. METHODS: Over the past 5 years, 15 patients with congenital BAVFs were treated endovascularly at our hospital using detachable coils and Onyx-34. All patients were clinically followed-up for 12-48 months. We retrospectively reviewed the medical records, cerebral angiograms, and endovascular reports for each patient. RESULTS: There were 15 patients with a total of 16 BAVFs (six men and nine women, with a mean age of 29.4 years). The clinical presentations were intracranial hemorrhage in six patients, headaches in four patients, and seizure in three patients, with two patients diagnosed incidentally. In all of the cases, transarterial microcatheterization was performed, 13 patients were treated with a combination of detachable coils and Onyx-34, and two with balloon-assisted coils and Onyx-34 embolization. There was no significant morbidity or mortality. All BAVF-related symptoms resolved immediately or gradually on clinical follow-up. Immediate angiographic obliteration was achieved in all patients. The fistulas remained closed in all patients, as ascertained by follow-up angiograms. No new neurological deficits related to the procedure were detected. CONCLUSIONS: In our experience, the endovascular treatment of BAVFs with combination of detachable coils and Onyx is feasible, safe, and effective. This technique affords more control in the Onyx injection and minimizes the risk of distal embolization.

Construction of multilayer films with bactericidal and long-term antitumor drug release properties as a non-vascular stent coating for therapy in obstruction.

The construction of antibacterial and antitumor coatings could offer effective routes to improve the therapeutic effects of non-vascular stents for unresectable obstructions caused by malignant tumours. Herein, polyelectrolyte multilayers have been explored as bactericidal coatings with controlled antitumor drug release. To solve the challenges of loading and controlled release of small-molecule chemotherapeutic drugs in polyelectrolyte multilayers, the antitumor drug doxorubicin (DOX) was chemically conjugated onto polyethylenimine via cis aconitic anhydride (pH-sensitive linker), thus obtaining the polycation prodrug PEI-CA-DOX. Alginate sodium was oxidized (O-Alg) and mixed with DOX to prepare the O-Alg-DOX complex as a polyanion. QCM-D and contact angle tests were used to monitor and verify the progressive build-up of the PEI-CA-DOX/O-Alg-DOX multilayer films, which show a linear growth. The in vitro antibacterial tests indicated that the PEI-CA-DOX-terminated PEI-CA-DOX/O-Alg-DOX multilayers could kill the bacteria effectively. As-such multilayers also presented a long-term sustained DOX release behaviour in PBS due to the combination of slow release in PEI-CA-DOX and fast release in the O-Alg-DOX complex. The as-designed PEI-CA-DOX/O-Alg-DOX multilayers with combined antibacterial and antitumor properties may have great potential for applications in non-vascular stent coatings for palliative treatment of obstruction caused by malignant tumours.

Cell directional migration and oriented division on three-dimensional laser-induced periodic surface structures on polystyrene.

The extracellular matrix in animal tissues usually provides a three-dimensional structural support to cells in addition to performing various other important functions. In the present study, wavy submicrometer laser-irradiated periodic surface structures (LIPSS) were produced on a smooth polystyrene film by polarized laser irradiation with a wavelength of 266 nm. Rat C6 glioma cells exhibited directional migration and oriented division on laser-irradiated polystyrene, which was parallel to the direction of LIPSS. However, rat C6 glioma cells on smooth polystyrene moved in a three-step invasion cycle, with faster migration speed than that on laser-irradiated polystyrene. In addition, focal adhesions examined by immunostaining focal adhesion kinase in human epithelial carcinoma HeLa cells were punctuated on smooth polystyrene, whereas dash-like on laser-irradiated polystyrene. We hypothesized that LIPSS on laser-irradiated polystyrene acted as an anisotropic and persistent mechanical stimulus to guide cell anisotropic spreading, migration and division through focal adhesions.

Wearable humidity sensor based on porous graphene network for respiration monitoring.

Respiration is as one of the most essential physiological signals, which can be used to monitor human healthcare and activities. Herein, we report a flexible, lightweight and highly conductive porous graphene network as the humidity sensor for respiration monitoring. To enhance the sensing performance, the graphene oxide (GO), poly (3, 4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT: PSS) and Ag colloids (AC) were used to modify the porous graphene. The humidity properties of porous based graphene networks have been investigated at different relative humidity (RH). The porous based graphene sensors exhibit excellent capability of monitoring different breathing patterns including mouse and nose respiration, normal and deep respiration. Besides, the signal variations before and after water intake was recorded by the sensor, which demonstrates the ability to monitor water loss during breathing period. Furthermore, the humidity sensor shows the ability to detect physiological activities including skin moisture, speaking and whistle rhythm, which could be a promising electronic for clinical respiration monitoring.