A Guanidinobenzol-Rich Polymer Overcoming Cascade Delivery Barriers for CRISPR-Cas9 Genome Editing.

The efficient cytosolic delivery of the CRISPR-Cas9 machinery remains a challenge for genome editing. Herein, we performed ligand screening and identified a guanidinobenzol-rich polymer to overcome the cascade delivery barriers of CRISPR-Cas9 ribonucleoproteins (RNPs) for genome editing. RNPs were stably loaded into the polymeric nanoparticles (PGBA NPs) by their inherent affinity. The polymer facilitated rapid endosomal escape of RNPs via a dynamic multiple-step cascade process. Importantly, the incorporation of fluorescence in the polymer helps to identify the correlation between cellular uptake and editing efficiency, increasing the efficiency up to 70% from the initial 30% for the enrichment of edited cells. The PGBA NPs efficiently deliver RNPs for in vivo gene editing via both local and systemic injections and dramatically reduce PCSK9 level. These results indicate that PGBA NPs enable the cascade delivery of RNPs for genome editing, showing great promise in broadening the therapeutic potential of the CRISPR-Cas9 technique.

A Novel Preoperative Design to Address Dermatochalasis in Asian Upper Blepharoplasty.

BACKGROUND: The preoperative design for the amount of skin excision of the upper eyelid is a common procedure in Asian blepharoplasty, but there lack of an effective method addressing dermatochalasis to acquire esthetically pleasing results. Our aim was to propose an alternative technique to determine the skin excision combined with the esthetics of eyes for correcting skin laxity and therefore to create attractive double eyelids. MATERIALS AND METHODS: The preoperative invaginating-simulating design combined with esthetic criteria for determining the amount of excised skin were performed during blepharoplasty. The Strasser grading system and the Global Aesthetic Improvement Scale were evaluated by analyzing the preoperative and 6-month-postoperative photographs. RESULTS: One hundred forty-two patients were included. The general outline of the "optimal incision" took on a knife in shape with a mean of 2.2±3.32 points of Strasser grading score. A total of 130 of 142 patients (91.5%) were judged as "good results" and 12 of 142 patients (8.5%) were judged as "mediocre". The Global Aesthetic Improvement Scale showed a significant cosmetic improvement with the result of 89.4%(127 of 142 patients) for "very much improved", 7.8% for "much improved" and other patients for "improved". No severe complications were observed. CONCLUSIONS: This preoperative design approach has been proven to be effective to address dermatochalasis (especially for lateral hooding) by simulating the expected appearance of a double eyelid combined with esthetic criteria of eyes simultaneously, which can contribute to achieving upper-lid rejuvenation and beautiful and natural outcomes.

Phyllanthi Tannin Loaded Solid Lipid Nanoparticles for Lung Cancer Therapy: Preparation, Characterization, Pharmacodynamics and Safety Evaluation.

The objective of the present study was to develop PTF-loaded solid lipid nanoparticles (PTF-SLNs) and investigate their efficacy in treating lung cancer. The PTF-SLNs were prepared by the thin film hydration method and verified by FTIR and TEM. Their physicochemical properties were characterized by particle size, polydispersity index (PDI), zeta potential, entrapment efficiency (EE), drug loading (DL), etc. Then, the pharmacodynamic studies of PTF-SLNs were performed on Lewis lung cancer cells and tumor-bearing mice. Finally, the safety studies were assessed by organ index, serum biochemical indicators, and histopathological changes. The PTF-SLNs were characterized by around 50 nm sphere nanoparticles, sustained ideal stability, and controlled drug release effects. The pharmacodynamic evaluation results showed that PTF-SLNs had stronger anti-tumor efficacy than PTF. An in vitro study revealed a more obvious cytotoxicity and apoptosis effect. The IC 50 values of PTF and PTF-SLNs were 67.43 µg/mL and 20.74 µg/mL, respectively. An in vivo study showed that the tumor inhibition rates of 2 g/kg PTF and 0.4 g/kg PTF-SLNs were 59.97% and 64.55%, respectively. The safety preliminary study indicated that PTF-SLNs improve the damage of PTF to normal organs to a certain extent. This study provides a nanoparticle delivery system with phenolic herbal extract to improve anti-tumor efficacy in lung cancer.

Cladophora Cellulose: Unique Biopolymer Nanofibrils for Emerging Energy, Environmental, and Life Science Applications.

Because of its natural abundance, hierarchical fibrous structure, mechanical flexibility, potential for chemical modification, biocompatibility, renewability, and abundance, cellulose is one of the most promising green materials for a bio-based future and sustainable economy. Cellulose derived from wood or bacteria has dominated the industrial cellulose market and has been developed to produce a number of advanced materials for applications in energy storage, environmental, and biotechnology areas. However, Cladophora cellulose (CC) extracted from green algae has unprecedented advantages over those celluloses because of its high crystallinity (>95%), low moisture adsorption capacity, excellent solution processability, high porosity in the mesoporous range, and associated high specific surface area. The unique physical and chemical properties of CC can add new features to and enhance the performance of nanocellulose-based materials, and these attributes have attracted a great deal of research interest over the past decade. This Account summarizes our recent research on the preparation, characterization, functionalization, and versatile applications of CC. Our aim is to provide a comprehensive overview of the uniqueness of CC with respect to material structure, properties, and emerging applications. We discuss the potential of CC in energy storage, environmental science, and life science, with emphasis on applications in which its properties are superior to those of other nanocellulose forms. Specifically, we discuss the production of the first-ever paper battery based on CC. This battery has initiated a rising interest in the development of sustainable paper-based energy storage devices, where cellulose is used as a combined building block and binder for paper electrodes of various types in combination with carbon, conducting polymers, and other electroactive materials. High-active-mass and high-mass-loading paper electrodes can be made in which the CC acts as a high-surface-area and porous substrate while a thin layer of electroactive material is coated on individual nanofibrils. We have shown that CC membranes can be used directly as battery separators because of their low moisture content, high mesoporosity, high thermal stability, and good electrolyte wettability. The safety, stability, and capacity of lithium-ion batteries can be enhanced simply by using CC-based separators. Moreover, the high chemical modifiability and adjustable porosity of dried CC papers allow them to be used as advanced membranes for environmental science (water and air purification, pollutant adsorption) and life science (virus isolation, protein recovery, hemodialysis, DNA extraction, bioactive substrates). Finally, we outline some concluding perspectives on the challenges and future directions of CC research with the aim to open up yet unexplored fields of use for this interesting material.

Nanoporous platinum-copper flowers for non-enzymatic sensitive detection of hydrogen peroxide and glucose at near-neutral pH values.

Multimodal nanoporous PtCu flowers (np-PtCu) were prepared via a two-step dealloying strategy under mild conditions. The np-PtCu alloy possesses an interconnected flower-like network skeleton with multiscale pore distribution. This material was placed on a glassy carbon electrode where it shows outstanding detection performance towards hydrogen peroxide and glucose in near-neutral pH solutions. It can be attributed to the specific structure in terms of interconnected nanoscaled ligaments, rich pore openings and a synergistic alloying effect. Figures of merit for detection H2O2 assay include (a) a working voltage of 0.7 V (vs. the reversible hydrogen electrode); (b) a wide linear response range (from 0.01 to 1.7 mM), and (c) a low detection limit (0.1 µM). The respective data for the glucose assay are (a) 0.4 V, (b) 0.01-2.0 mM, and (c) 0.1 µM. The method is not interfered in the presence of common concentrations of dopamine, acetaminophen and ascorbic acid. Graphical abstract Multimodal nanoporous (np) PtCu alloy was prepared via a two-step dealloying strategy under mild conditions. Np-PtCu exhibits superior electrocatalytic activity. The assay is highly sensitive, selective, and it allows for a long-term detection of H2O2 and glucose.

Preclinical Justification of pbi-shRNA EWS/FLI1 Lipoplex (LPX) Treatment for Ewing's Sarcoma.

The EWS/FLI1 fusion gene is well characterized as a driver of Ewing's sarcoma. Bi-shRNA EWS/FLI1 is a functional plasmid DNA construct that transcribes both siRNA and miRNA-like effectors each of which targets the identical type 1 translocation junction region of the EWS/FLI1 transcribed mRNA sequence. Previous preclinical and clinical studies confirm the safety of this RNA interference platform technology and consistently demonstrate designated mRNA and protein target knockdown at greater than 90% efficiency. We initiated development of pbi-shRNA EWS/FLI1 lipoplex (LPX) for the treatment of type 1 Ewing's sarcoma. Clinical-grade plasmid was manufactured and both sequence and activity verified. Target protein and RNA knockdown of 85-92% was demonstrated in vitro in type 1 human Ewing's sarcoma tumor cell lines with the optimal bi-shRNA EWS/FLI1 plasmid. This functional plasmid was placed in a clinically tested, liposomal (LP) delivery vehicle followed by in vivo verification of activity. Type 1 Ewing's sarcoma xenograft modeling confirmed dose related safety and tumor response to pbi-shRNA EWS/FLI1 LPX. Toxicology studies in mini-pigs with doses comparable to the demonstrated in vivo efficacy dose resulted in transient fever, occasional limited hypertension at low- and high-dose assessment and transient liver enzyme elevation at high dose. These results provide the justification to initiate clinical testing.

Measuring the Surface-Surface Interactions Induced by Serum Proteins in a Physiological Environment.

In this work, we applied total internal reflection microscopy (TIRM) to directly measure the interactions between three different kinds of macroscopic surfaces: namely bare polystyrene (PS) particle and bare silica surface (bare-PS/bare-silica), PS particle and silica surfaces both coated with bovine serum albumin (BSA) (BSA-PS/BSA-silica), and PS particle and silica surfaces both modified with polyethylene glycol (PEG) (PEG-PS/PEG-silica) polymers, in phosphate buffer solution (PBS) and fetal bovine serum (FBS). Our results showed that in PBS, all the bare-PS, BSA-PS, and PEG-PS particles were irreversibly deposited onto the bare silica surface or surfaces coated either with BSA or PEG. However, in FBS, the interaction potentials between the particle and surface exhibited both free-diffusing particle and stuck particle profiles. Dynamic light scattering (DLS) and elliposmeter measurements indicated that there was a layer of serum proteins adsorbed on the PS particle and silica surface. TIRM measurement revealed that such adsorbed serum proteins can mediate the surface-surface interactions by providing additional stabilization under certain conditions, but also promoting bridging effect between the two surfaces. The measured potential profile of the stuck particle in FBS thus was much wider than in PBS. These quantitative measurements provide insights that serum proteins adsorbed onto surfaces can regulate surface-surface interactions, thus leading to unique moving behavior and stability of colloidal particles in the serum environment.

Non-Fullerene-Acceptor-Based Bulk-Heterojunction Organic Solar Cells with Efficiency over 7.

A novel perylene bisimide (PBI) dimer-based acceptor material, SdiPBI-S, was developed. Conventional bulk-heterojunction (BHJ) solar cells based on SdiPBI-S and the wide-band-gap polymer PDBT-T1 show a high power conversion efficiency (PCE) of 7.16% with a high open-circuit voltage of 0.90 V, a high short-circuit current density of 11.98 mA/cm(2), and an impressive fill factor of 66.1%. Favorable phase separation and balanced carrier mobilites in the BHJ films account for the high photovoltaic performance. The results demonstrate that fine-tuning of PBI-based materials is a promising way to improve the PCEs of non-fullerene BHJ organic solar cells.

Measurements of long-range interactions between protein-functionalized surfaces by total internal reflection microscopy.

Understanding the interaction between protein-functionalized surfaces is an important subject in a variety of protein-related processes, ranging from coatings for biomedical implants to targeted drug carriers and biosensors. In this work, utilizing a total internal reflection microscope (TIRM), we have directly measured the interactions between micron-sized particles decorated with three types of common proteins concanavalin A (ConA), bovine serum albumin (BSA), lysozyme (LYZ), and glass surface coated with soy proteins (SP). Our results show that the protein adsorption greatly affects the charge property of the surfaces, and the interactions between those protein-functionalized surfaces depend on solution pH values. At pH 7.5-10.0, all these three protein-functionalized particles are highly negatively charged, and they move freely above the negatively charged SP-functionalized surface. The net interaction between protein-functionalized surfaces captured by TIRM was found as a long-range, nonspecific double-layer repulsion. When pH was decreased to 5.0, both protein-functionalized surfaces became neutral and double-layer repulsion was greatly reduced, resulting in adhesion of all three protein-functionalized particles to the SP-functionalized surface due to the hydrophobic attraction. The situation is very different at pH = 4.0: BSA-decorated particles, which are highly charged, can move freely above the SP-functionalized surfaces, while ConA- and LYZ-decorated particles can only move restrictively in a limited range. Our results quantify these nonspecific kT-scale interactions between protein-functionalized surfaces, which will enable the design of surfaces for use in biomedical applications and study of biomolecular interactions.

Ultra-pH-sensitive nanoprobe library with broad pH tunability and fluorescence emissions.

pH is an important physiological parameter that plays a critical role in cellular and tissue homeostasis. Conventional small molecular pH sensors (e.g., fluorescein, Lysosensor) are limited by broad pH response and restricted fluorescent emissions. Previously, we reported the development of ultra-pH-sensitive (UPS) nanoprobes with sharp pH response using fluorophores with small Stokes shifts (<40 nm). In this study, we expand the UPS design to a library of nanoprobes with operator-predetermined pH transitions and wide fluorescent emissions (400-820 nm). A copolymer strategy was employed to fine tune the hydrophobicity of the ionizable hydrophobic block, which led to a desired transition pH based on standard curves. Interestingly, matching the hydrophobicity of the monomers was critical to achieve a sharp pH transition. To overcome the fluorophore limitations, we introduced copolymers conjugated with fluorescence quenchers (FQs). In the micelle state, the FQs effectively suppressed the emission of fluorophores regardless of their Stokes shifts and further increased the fluorescence activation ratios. As a proof of concept, we generated a library of 10 nanoprobes each encoded with a unique fluorophore. The nanoprobes cover the entire physiologic range of pH (4-7.4) with 0.3 pH increments. Each nanoprobe maintained a sharp pH transition (on/off < 0.25 pH) and high fluorescence activation ratio (>50-fold between on and off states). The UPS library provides a useful toolkit to study pH regulation in many pathophysiological indications (e.g., cancer, lysosome catabolism) as well as establishing tumor-activatable systems for cancer imaging and drug delivery.

Phthalate ester (PAEs) accumulation in wheat tissues and dynamic changes of rhizosphere microorganisms in the field with plastic-film residue.

Phthalates acid esters (PAEs) have accumulated in soil and crops like wheat as a result of the widespread usage of plastic films. It is yet unclear, nevertheless, how these dynamic variations in PAE accumulation in wheat tissues relate to rhizosphere bacteria in the field. In this work, a field root-bag experiment was conducted to examine the changes of PAEs accumulation in the rhizosphere soil and wheat tissues under film residue conditions at four different growth stages of wheat, and to clarify the roles played by the microbial community in the alterations. Results showed that the plastic film residues significantly increased the concentrations of PAEs in soils, wheat roots, straw and grains. The maximum ΣPAEs concentration in soils and different wheat tissues appeared at the maturity, with the ΣPAEs concentration of 1.57 mg kg-1, 4.77 mg kg-1, 5.21 mg kg-1, 1.81 mg kg-1 for rhizosphere soils, wheat roots, straw and grains, respectively. The plastic film residues significantly changed the functions and components of the bacterial community, increased the stochastic processes of the bacterial community assembly, and reduced the complexity and stability of the bacterial network. In addition, the present study identified some bacteria associated with plastic film residues and PAEs degradation in key-stone taxa, and their relative abundances were positive related to the ΣPAEs concentration in soils. The PAEs content and key-stone taxa in rhizosphere soil play a crucial role in the formation of rhizosphere soil bacterial communities. This field study provides valuable information for better understanding the role of microorganisms in the complex system consisting of film residue, soil and crops.

Engineered Bio-Based Hydrogels for Cancer Immunotherapy.

Immunotherapy represents a revolutionary paradigm in cancer management, showcasing its potential to impede tumor metastasis and recurrence. Nonetheless, challenges including limited therapeutic efficacy and severe immune-related side effects are frequently encountered, especially in solid tumors. Hydrogels, a class of versatile materials featuring well-hydrated structures widely used in biomedicine, offer a promising platform for encapsulating and releasing small molecule drugs, biomacromolecules, and cells in a controlled manner. Immunomodulatory hydrogels present a unique capability for augmenting immune activation and mitigating systemic toxicity through encapsulation of multiple components and localized administration. Notably, hydrogels based on biopolymers have gained significant interest owing to their biocompatibility, environmental friendliness, and ease of production. This review delves into the recent advances in bio-based hydrogels in cancer immunotherapy and synergistic combinatorial approaches, highlighting their diverse applications. It is anticipated that this review will guide the rational design of hydrogels in the field of cancer immunotherapy, fostering clinical translation and ultimately benefiting patients.

Identification of a Novel Homozygous Mutation in MTMR2 Gene Causes Very Rare Charcot-Marie-Tooth Disease Type 4B1.

Background: Charcot-Marie-Tooth disease (CMT) is a heterogeneous group of disorders involving peripheral nervous system. Charcot-Marie-Tooth disease 4B1 (CMT4B1) is a rare subtype of CMT. CMT4B1 is an axonal demyelinating polyneuropathy with an autosomal recessive mode of inheritance. Patients with CMT4B1 usually manifested with dysfunction of the motor and sensory systems which leads to gradual and progressive muscular weakness and atrophy, starting from the peroneal muscles and finally affecting the distal muscles. Germline mutations in MTMR2 gene causes CMT4B1. Material and Methods: In this study, we investigated a 4-year-old Chinese boy with gradual and progressive weakness and atrophy of both proximal and distal muscles. The proband's parents did not show any abnormalities. Whole-exome sequencing and Sanger sequencing were performed. Results: Whole-exome sequencing identified a novel homozygous nonsense mutation (c.118A>T; p.Lys40*) in exon 2 of MTMR2 gene in the proband. This novel mutation leads to the formation of a truncated MTMR2 protein of 39 amino acids instead of the wild- type MTMR2 protein of 643 amino acids. This mutation is predicted to cause the complete loss of the PH-GRAM domain, phosphatase domain, coiled-coil domain, and PDZ-binding motif of the MTMR2 protein. Sanger sequencing revealed that the proband's parents carried the mutation in a heterozygous state. This mutation was absent in 100 healthy control individuals. Conclusion: This study reports the first mutation in MTMR2 associated with CMT4B1 in a Chinese population. Our study also showed the importance of whole-exome sequencing in identifying candidate genes and disease-causing variants in patients with CMT4B1.

Lipid-polymer nanoparticles encapsulating doxorubicin and 2'-deoxy-5-azacytidine enhance the sensitivity of cancer cells to chemical therapeutics.

Nanomedcine holds great potential in cancer therapy due to its flexibility on drug delivery, protection, releasing, and targeting. Epigenetic drugs, such as 2'-deoxy-5-azacytidine (DAC), are able to cause reactive expression of tumor suppressor genes (TSG) in human cancers and, therefore, might be able to enhance the sensitivity of cancer cells to chemotherapy. In this report, we fabricated a lipid-polymer nanoparticle for codelivery of epigenetic drug DAC and traditional chemotherapeutic drug (DOX) to cancer cells and monitored the growth inhibition of the hybrid nanoparticles (NPs) on cancer cells. Our results showed that NPs encapsulating DAC, DOX, or both, could be effectively internalized by cancer cells. More importantly, incorporating DAC into NPs significantly enhanced the sensitivity of cancer cells to DOX by inhibiting cell growth rate and inducing cell apoptosis. Further evidence indicated that DAC encapsulated by NPs was able to rescue the expression of silenced TSG in cancer cells. Overall our work clearly suggested that the resulting lipid-polymer nanoparticle is a potential tool for combining epigenetic therapy and chemotherapy.

The content of PAEs in field soils caused by the residual film has a periodical peak.

The wide use of plastic film mulch has led to the release of phthalate esters (PAEs), which seriously threatens the soil environment and the safety of crop production. However, it is unknown whether there is a maximum threshold of soil PAEs accumulation induced by plastic film residue, and the dynamic changes of soil PAEs under field conditions are still unclear. To address these issues, a field experiment was conducted to investigate the temporal fluctuations of soil PAEs content and the response of microbial community structure in the field with plastic film residue. Results showed that the content of soil PAEs fluctuated during an observation period of one year, had a periodical peak in winter and summer, and was exacerbated by the increase in the aging degree and residual amount of plastic films. The PAEs content in soil with black films was higher than the US soil allowable criteria. High-throughput sequencing analysis showed that the addition of residual film significantly increased the alpha diversity of bacterial communities, changed the structure of bacterial community, and generated significant disturbances in bacterial function. Besides, the residual film recruited more microbiota related to plastic film and PAEs degradation. Results of the present study provide insight into the dynamic variation of soil PAEs caused by plastic film residue in one year, which is important to help evaluate the pollution risk of PAEs on soils and crops caused by residual plastic film.

LyP-1 modification to enhance delivery of artemisinin or fluorescent probe loaded polymeric micelles to highly metastatic tumor and its lymphatics.

Metastatic cancers are prone to form metastasis at a distance and acquire drug resistance, which are very common clinically and major obstacles to successful chemotherapy. Besides the tumor itself, the lymphatic system is increasingly emerging as a new target for anticancer therapy because it is an important route of tumor metastasis. To specifically deliver drug to both highly metastatic tumor and its lymphatics, tumor- and tumor lymphatics-homing peptide (LyP-1) conjugated PEG-PCL micelles (LyP-1-PM) were first constructed. Artemisinin (ART), a natural product with potential anticancer and antilymphangiogenesis effects, was chosen as the model drug and associated into the micelles. Both PM and LyP-1-PM had similar physiochemical properties, about 30 nm in size with uniform distribution. Highly metastatic breast cancer MDA-MB-435S cells and lymphatic endothelial cells (LEC) were applied as cell models. Flow cytometry and confocal microscopy studies showed that LyP-1-PM exhibited its specificity to both cell lines evidenced by its higher cellular uptake than PM. LyP-1-PM-ART demonstrated higher inhibition effect than PM-ART against these two cell lines in cell apoptosis, cell cycle and cytotoxicity tests. Near-infrared imaging showed that LyP-1-PM was distributed more in orthotopic MDA-MB-435S tumor than PM. Further study by colocalization indicated that PM accumulated near blood vessels, while LyP-1-PM further homed to tumor lymphatic vessels. LyP-1-PM achieved higher antitumor efficacy than other ART formulations in vivo with low toxicity. Both in vitro and in vivo studies here proved that LyP-1 modification enhanced the specific delivery of ART or fluorescent probe loaded polymeric micelles to MDA-MB-435S and LEC. Therefore, LyP-1-PM might be promising in terms of specific delivery of therapeutic or imaging agents to both highly metastatic breast tumor and its lymphatics.

Diagnosis and treatment of ectopic thyroid carcinoma: A case report and literature review.

Introduction: Ectopic thyroid cancer (ETC) is primary thyroid cancer occurring in ectopic thyroid tissue, and its incidence rate is approximately 0.3%-0.5% of thyroid cancer. Only approximately 132 cases of ETC have been diagnosed and treated worldwide in the past 110 years, with most of them being adults. Of note, patients with ETC are prone to misdiagnosis and mistreatment. Case report: This was a 13-year-old adolescent female who reported having a sensation of swallowing obstruction when eating blocky foods. Color Doppler Ultrasound (CDU) found a 2.3 cm ×1.7 cm × 2.1 cm hypoechoic nodule slightly to the right of the deep surface of the tongue base, with a honeycomb shape. Meanwhile, a mixed echogenic nodule of approximately 2.0 cm × 1.9 cm × 2.3 cm was seen deep in the mouth floor, and a very low echogenic region of 1.4 cm × 1.1 cm × 1.8 cm was observed in the nodule. We then performed a fine needle aspiration biopsy (FNAB) of the thyroid nodules guided by CDU, and the results showed papillary thyroid carcinoma (PTC). Then, a local extended resection of the thyroid carcinoma was performed. Bilateral cervical IA and adjacent subhyoid lymph node dissection was performed through a small anterior cervical incision. The patient recovered well, and was discharged on the fifth day after surgery. The patient only took levothyroxine tablets for replacement therapy after surgery. The patient was followed up for 36 months, and the thyroid function remained in the normal range. Reexamination by CDU showed no tumor recurrence, lymph node enlargement, or obvious change in the tongue base ectopic thyroid. Conclusions: ETC is an extremely rare type of thyroid cancer, which is easy to be misdiagnosed. Preoperative use of CDU, nuclide scanning, computed tomography (CT)/Magnetic resonance imaging (MRI), and FNAB can significantly reduce the misdiagnosis rate of this disease. Surgery is currently the main treatment for ETC. Complete resection still has a high cure rate. For patients with advanced ETC who cannot be completely resected, external radiotherapy and targeted therapy can be tried, but the prognosis needs to be verified with more cases in the future.

Flexible conductive silk-PPy hydrogel toward wearable electronic strain sensors.

Conductive hydrogels have been studied as promising materials for the flexible and wearable bioelectronics, because of their unique electrical and mechanical properties. Addition of conducting polymers in biomaterial-based hydrogel matrix is a simple yet effective way to construct hydrogels with good conductivity and flexibility. In this work, a conductive hydrogel composed by a silk hydrogel and a conducting polymer, polypyrrole (PPy), is developed viain situpolymerization of pyrrole into the silk fibroin network. The silk-PPy hydrogel shows high conductivity (26 S m-1), as well as sensitive and fast responses to corresponding conformation changes. Taking advantages of these properties, flexible and wearable strain sensors are proposed for the monitoring of various body movements, which can detect both the large and subtle human motions with good sensitivity, reproducibility and stability. The hybridization of biomaterials and conducting polymers endows the multifunctions of the conductive hydrogels, thus showing considerable potentials in the advancement of the wearable electronics.

Thermoresponsive polypeptides from pegylated poly-L-glutamates.

The synthesis and characterization of new thermoresponsive pegylated poly-L-glutamate (poly-L-EG(x)Glu) are described. The obtained polypeptides display low critical solution temperature (LCST) behaviors in water, and the LCST can be tuned via copolymerization of different amino acid monomers at varied molar ratio. This is the first example of thermoresponsive polypeptide made from ring-opening polymerization of α-amino acid N-carboxyanhydrides (NCAs). Circular dichroism characterizations reveal that the secondary structure of poly-L-EG(x)Glu depended on the chain length of the side chain.

Porous structure design and mechanical behavior analysis based on TPMS for customized root analogue implant.

Compared with the traditional dental implant with screw structure, the root analogue implant (RAI) is customized to fit with the wall of the alveolar bone, which helps to accelerate the clinical implantation process. However, a solid RAI made of Ti6Al4V material has a much higher Young's modulus than the surrounding bone tissue, which can cause a stress shielding effect and thereby lead to implant failure. Also, a solid RAI is not conducive to the growth of osteoblasts. To overcome these problems, a porous structure design and optimization method for customized RAIs is proposed. A triply periodic minimal surface (TPMS) offers a smooth surface with pore interconnectivity, which can satisfy the biological/mechanical implantation requirements and efficiently construct many complex bone scaffolds. P and G structures with four degrees of porosity (30%, 40%, 50%, and 60%) were designed and prepared as cubic samples. The Young's modulus, Poisson's ratio, and yield strength of each sample were measured through compression experiments. Additionally, the stress distribution at the interface between the customized RAI and surrounding bone tissue under different pore structures and porosities was evaluated by finite element analysis (FEA). It was found that the quantitative relationships between the Young's modulus/Poisson's ratio and porosity of the P and G structures were consistent with the rules of the percolation model. The yield strengths of the P and G structures with four different porosities were all greater than the yield strength of cortical bone, which satisfies the implantation conditions. Furthermore, the P and G structures with 30% and 40% porosity were proved by FEA to have no stress shielding effect, promote the growth of surrounding bone tissue, and form long-term and stable osseointegration. It can be concluded that the porous RAI constructed with a TPMS can reduce the stress shielding effect, which is beneficial for accelerating the clinical implantation process.