A comparative characterisation of commercially available lipid-polymer nanoparticles formed from model membranes.

From the discovery of the first membrane-interacting polymer, styrene maleic-acid (SMA), there has been a rapid development of membrane solubilising polymers. These new polymers can solubilise membranes under a wide range of conditions and produce varied sizes of nanoparticles, yet there has been a lack of broad comparison between the common polymer types and solubilising conditions. Here, we present a comparative study on the three most common commercial polymers: SMA 3:1, SMA 2:1, and DIBMA. Additionally, this work presents, for the first time, a comparative characterisation of polymethacrylate copolymer (PMA). Absorbance and dynamic light scattering measurements were used to evaluate solubilisation across key buffer conditions in a simple, adaptable assay format that looked at pH, salinity, and divalent cation concentration. Lipid-polymer nanoparticles formed from SMA variants were found to be the most susceptible to buffer effects, with nanoparticles from either zwitterionic DMPC or POPC:POPG (3:1) bilayers only forming in low to moderate salinity (< 600 mM NaCl) and above pH 6. DIBMA-lipid nanoparticles could be formed above a pH of 5 and were stable in up to 4 M NaCl. Similarly, PMA-lipid nanoparticles were stable in all NaCl concentrations tested (up to 4 M) and a broad pH range (3-10). However, for both DIBMA and PMA nanoparticles there is a severe penalty observed for bilayer solubilisation in non-optimal conditions or when using a charged membrane. Additionally, lipid fluidity of the DMPC-polymer nanoparticles was analysed through cw-EPR, showing no cooperative gel-fluid transition as would be expected for native-like lipid membranes.

Nanodisc-Targeted STD NMR Spectroscopy Reveals Atomic Details of Ligand Binding to Lipid Environments.

Saturation transfer difference (STD) NMR spectroscopy is one of the most popular ligand-based NMR techniques for the study of protein-ligand interactions. This is due to its robustness and the fact that it is focused on the signals of the ligand, without any need for NMR information on the macromolecular target. This technique is most commonly applied to systems involving different types of ligands (e.g., small organic molecules, carbohydrates or lipids) and a protein as the target, in which the latter is selectively saturated. However, only a few examples have been reported where membrane mimetics are the macromolecular binding partners. Here, we have employed STD NMR spectroscopy to investigate the interactions of the neurotransmitter dopamine with mimetics of lipid bilayers, such as nanodiscs, by saturation of the latter. In particular, the interactions between dopamine and model lipid nanodiscs formed either from charged or zwitterionic lipids have been resolved at the atomic level. The results, in agreement with previous isothermal titration calorimetry studies, show that dopamine preferentially binds to negatively charged model membranes, but also provide detailed atomic insights into the mode of interaction of dopamine with membrane mimetics. Our findings provide relevant structural information for the design of lipid-based drug carriers of dopamine and its structural analogues and are of general applicability to other systems.

A detergent-free strategy for the reconstitution of active enzyme complexes from native biological membranes into nanoscale discs.

BACKGROUND: The reconstitution of membrane proteins and complexes into nanoscale lipid bilayer structures has contributed significantly to biochemical and biophysical analyses. Current methods for performing such reconstitutions entail an initial detergent-mediated step to solubilize and isolate membrane proteins. Exposure to detergents, however, can destabilize many membrane proteins and result in a loss of function. Amphipathic copolymers have recently been used to stabilize membrane proteins and complexes following suitable detergent extraction. However, the ability of these copolymers to extract proteins directly from native lipid bilayers for subsequent reconstitution and characterization has not been explored. RESULTS: The styrene-maleic acid (SMA) copolymer effectively solubilized membranes of isolated mitochondria and extracted protein complexes. Membrane complexes were reconstituted into polymer-bound nanoscale discs along with endogenous lipids. Using respiratory Complex IV as a model, these particles were shown to maintain the enzymatic activity of multicomponent electron transporting complexes. CONCLUSIONS: We report a novel process for reconstituting fully operational protein complexes directly from cellular membranes into nanoscale lipid bilayers using the SMA copolymer. This facile, single-step strategy obviates the requirement for detergents and yields membrane complexes suitable for structural and functional studies.

Helical membrane protein conformations and their environment.

Evidence that membrane proteins respond conformationally and functionally to their environment is growing. Structural models, by necessity, have been characterized in preparations where the protein has been removed from its native environment. Different structural methods have used various membrane mimetics that have recently included lipid bilayers as a more native-like environment. Structural tools applied to lipid bilayer-embedded integral proteins are informing us about important generic characteristics of how membrane proteins respond to the lipid environment as compared with their response to other nonlipid environments. Here, we review the current status of the field, with specific reference to observations of some well-studied α-helical membrane proteins, as a starting point to aid the development of possible generic principles for model refinement.

Two states of a light-sensitive membrane protein captured at room temperature using thin-film sample mounts.

Room-temperature diffraction methods are highly desirable for dynamic studies of biological macromolecules, since they allow high-resolution structural data to be collected as proteins undergo conformational changes. For crystals grown in lipidic cubic phase (LCP), an extruder is commonly used to pass a stream of microcrystals through the X-ray beam; however, the sample quantities required for this method may be difficult to produce for many membrane proteins. A more sample-efficient environment was created using two layers of low X-ray transmittance polymer films to mount crystals of the archaerhodopsin-3 (AR3) photoreceptor and room-temperature diffraction data were acquired. By using transparent and opaque polymer films, two structures, one corresponding to the desensitized, dark-adapted (DA) state and the other to the ground or light-adapted (LA) state, were solved to better than 1.9 Šresolution. All of the key structural features of AR3 were resolved, including the retinal chromophore, which is present as the 13-cis isomer in the DA state and as the all-trans isomer in the LA state. The film-sandwich sample environment enables diffraction data to be recorded at room temperature in both illuminated and dark conditions, which more closely approximate those in vivo. This simple approach is applicable to a wide range of membrane proteins crystallized in LCP and light-sensitive samples in general at synchrotron and laboratory X-ray sources.

Bilayer-mediated clustering and functional interaction of MscL channels.

Mechanosensitive channels allow bacteria to respond to osmotic stress by opening a nanometer-sized pore in the cellular membrane. Although the underlying mechanism has been thoroughly studied on the basis of individual channels, the behavior of channel ensembles has yet to be elucidated. This work reveals that mechanosensitive channels of large conductance (MscL) exhibit a tendency to spatially cluster, and demonstrates the functional relevance of clustering. We evaluated the spatial distribution of channels in a lipid bilayer using patch-clamp electrophysiology, fluorescence and atomic force microscopy, and neutron scattering and reflection techniques, coupled with mathematical modeling of the mechanics of a membrane crowded with proteins. The results indicate that MscL forms clusters under a wide range of conditions. MscL is closely packed within each cluster but is still active and mechanosensitive. However, the channel activity is modulated by the presence of neighboring proteins, indicating membrane-mediated protein-protein interactions. Collectively, these results suggest that MscL self-assembly into channel clusters plays an osmoregulatory functional role in the membrane.

Detergent-free solubilisation & purification of a G protein coupled receptor using a polymethacrylate polymer.

G protein coupled receptors (GPCRs) function as guanine nucleotide exchange factors (GEFs) at heterotrimeric G proteins, and conduct this role embedded in a lipid bilayer. Detergents are widely used to solubilise GPCRs for structural and biophysical analysis, but are poor mimics of the lipid bilayer and may be deleterious to protein function. Amphipathic polymers have emerged as promising alternatives to detergents, which maintain a lipid environment around a membrane protein during purification. Of these polymers, the polymethacrylate (PMA) polymers have potential advantages over the most popular styrene maleic acid (SMA) polymer, but to date have not been applied to purification of membrane proteins. Here we use a class A GPCR, neurotensin receptor 1 (NTSR1), to explore detergent-free purification using PMA. By using an NTSR1-eGFP fusion protein expressed in Sf9 cells, a range of solubilisation conditions were screened, demonstrating the importance of solubilisation temperature, pH, NaCl concentration and the relative amounts of polymer and membrane sample. PMA-solubilised NTSR1 displayed compatibility with standard purification protocols and millimolar divalent cation concentrations. Moreover, the receptor in PMA discs showed stimulation of both Gq and Gi1 heterotrimers to an extent that was greater than that for the detergent-solubilised receptor. PMA therefore represents a viable alternative to SMA for membrane protein purification and has a potentially broad utility in studying GPCRs and other membrane proteins.

Constitutive dimerization of the G-protein coupled receptor, neurotensin receptor 1, reconstituted into phospholipid bilayers.

Neurotensin receptor 1 (NTS1), a Family A G-protein coupled receptor (GPCR), was expressed in Escherichia coli as a fusion with the fluorescent proteins eCFP or eYFP. A fluorophore-tagged receptor was used to study the multimerization of NTS1 in detergent solution and in brain polar lipid bilayers, using fluorescence resonance energy transfer (FRET). A detergent-solubilized receptor was unable to form FRET-competent complexes at concentrations of up to 200 nM, suggesting that the receptor is monomeric in this environment. When reconstituted into a model membrane system at low receptor density, the observed FRET was independent of agonist binding, suggesting constitutive multimer formation. In competition studies, decreased FRET in the presence of untagged NTS1 excludes the possibility of fluorescent protein-induced interactions. A simulation of the experimental data indicates that NTS1 exists predominantly as a homodimer, rather than as higher-order multimers. These observations suggest that, in common with several other Family A GPCRs, NTS1 forms a constitutive dimer in lipid bilayers, stabilized through receptor-receptor interactions in the absence of other cellular signaling components. Therefore, this work demonstrates that well-characterized model membrane systems are useful tools for the study of GPCR multimerization, allowing fine control over system composition and complexity, provided that rigorous control experiments are performed.

From polymer chemistry to structural biology: The development of SMA and related amphipathic polymers for membrane protein extraction and solubilisation.

Nanoparticles assembled with poly(styrene-maleic acid) copolymers, identified in the literature as Lipodisq, SMALPs or Native Nanodisc, are routinely used as membrane mimetics to stabilise protein structures in their native conformation. To date, transmembrane proteins of varying complexity (up to 8 beta strands or 48 alpha helices) and of a range of molecular weights (from 27 kDa up to 500 kDa) have been incorporated into this particle system for structural and functional studies. SMA and related amphipathic polymers have become versatile components of the biochemist's tool kit for the stabilisation, extraction and structural characterization of membrane proteins by techniques including cryo-EM and X-ray crystallography. Lipodisq formation does not require the use of conventional detergents and thus avoids their associated detrimental consequences. Here the development of this technology, from its fundamental concept and design to the diverse range of experimental methodologies to which it can now be applied, will be reviewed.

beta-Sheet structured beta-amyloid(1-40) perturbs phosphatidylcholine model membranes.

The disruption of intracellular calcium homeostasis plays a central role in the pathology of Alzheimer's disease, which is also characterized by accumulation of the amyloid-beta peptides Abeta40 and Abeta42. These amphipathic peptides may become associated with neuronal membranes and affect their barrier function, resulting in the loss of calcium homeostasis. This suggestion has been extensively investigated by exposing protein-free model membranes, either vesicles or planar bilayers, to soluble Abeta. Primarily unstructured Abeta has been shown to undergo a membrane-induced conformational change to either primarily beta-structure or helical structure, depending, among other factors, on the model membrane composition. Association of Abeta renders lipid bilayers permeable to ions but there is dispute whether this is due to the formation of discrete transmembrane ion channels of Abeta peptides, or to a non-specific perturbation of bilayer integrity by lipid head group-associated Abeta. Here, we have attempted incorporation of Abeta in the hydrophobic core of zwitterionic bilayers, the most simple model membrane system, by preparing proteoliposomes by hydration of a mixed film of Abeta peptides and phosphatidylcholine (PC) lipids. Despite the use of a solvent mixture in which Abeta40 and Abeta42 are almost entirely helical, the Abeta analogs were beta-structured in the resulting vesicle dispersions. When Abeta40-containing vesicles were fused into a zwitterionic planar bilayer, the typical irregular "single channel-like" conductance of Abeta was observed. The maximum conductance increased with additional vesicle fusion, while still exhibiting single channel-like behavior. Supported bilayers formed from Abeta40/PC vesicles did not exhibit any channel-like topological features, but the bilayer destabilized in time. Abeta40 was present primarily as beta-sheets in supported multilayers formed from the same vesicles. The combined observations argue for a non-specific perturbation of zwitterionic bilayers by surface association of small amphipathic Abeta40 assemblies.

Solid-state NMR in drug design and discovery for membrane-embedded targets.

Observing drugs and ligands at their site of action in membrane proteins is now possible through the use of a development in biomolecular NMR spectroscopy known as solid-state NMR. Even large, functionally active complexes are being examined using this method, with structural details being resolved at super-high subnanometre resolution. This is supplemented by detailed dynamic and electronic information about the surrounding ligand environment, and gives surprising new insights into the way in which ligands bind, which can aid drug design.

Two types of Alzheimer's beta-amyloid (1-40) peptide membrane interactions: aggregation preventing transmembrane anchoring versus accelerated surface fibril formation.

The 39-42 amino acid long, amphipathic amyloid-beta peptide (Abeta) is one of the key components involved in Alzheimer's disease (AD). In the neuropathology of AD, Abeta presumably exerts its neurotoxic action via interactions with neuronal membranes. In our studies a combination of 31P MAS NMR (magic angle spinning nuclear magnetic resonance) and CD (circular dichroism) spectroscopy suggest fundamental differences in the functional organization of supramolecular Abeta(1-40) membrane assemblies for two different scenarios with potential implication in AD: Abeta peptide can either be firmly anchored in a membrane upon proteolytic cleavage, thereby being prevented against release and aggregation, or it can have fundamentally adverse effects when bound to membrane surfaces by undergoing accelerated aggregation, causing neuronal apoptotic cell death. Acidic lipids can prevent release of membrane inserted Abeta(1-40) by stabilizing its hydrophobic transmembrane C-terminal part (residue 29-40) in an alpha-helical conformation via an electrostatic anchor between its basic Lys28 residue and the negatively charged membrane interface. However, if Abeta(1-40) is released as a soluble monomer, charged membranes act as two-dimensional aggregation-templates where an increasing amount of charged lipids (possible pathological degradation products) causes a dramatic accumulation of surface-associated Abeta(1-40) peptide followed by accelerated aggregation into toxic structures. These results suggest that two different molecular mechanisms of peptide-membrane assemblies are involved in Abeta's pathophysiology with the finely balanced type of Abeta-lipid interactions against release of Abeta from neuronal membranes being overcompensated by an Abeta-membrane assembly which causes toxic beta-structured aggregates in AD. Therefore, pathological interactions of Abeta peptide with neuronal membranes might not only depend on the oligomerization state of the peptide, but also the type and nature of the supramolecular Abeta-membrane assemblies inherited from Abeta's origin.

Reconstitution of membrane proteins: a GPCR as an example.

Membrane proteins are the gatekeepers to the cell and are essential to the function of all cells, controlling the flow of molecules and information across the cell membrane. Much effort has been put into the development of systems for studying membrane proteins in simplified environments that nevertheless mimic their native lipid environment. After isolation and production of purified membrane proteins in detergent, it is often necessary to reconstitute them into a lipid structure such as liposome, nanodisc, or lipodisq. Each of these has the advantage of returning the protein to a defined lipid environment, and the choice of system depends on the application. Regardless of the system to be used, the fundamental process involves the removal of detergent and incorporation of the protein into a stable lipid system. This chapter details methodologies we have developed, mainly focussed on the model G protein-coupled receptor (GPCR) neurotensin receptor 1, and the GPCR-homologue and model, bacteriorhopdopsin.

Membrane protein structure determination using solid-state NMR.

Solid-state NMR is emerging as a method for resolving structural information for large biomolecular complexes, such as membrane-embedded proteins. In principle, there is no molecular weight limit to the use of the approach, although the complexity and volume of data is still outside complete assignment and structural determinations for any large (Mr > approx 30,000) complex unless specific methods to reduce the information content to a manageable amount are employed. Such methods include specific residue-type labeling, labeling of putative segments of a protein, or examination of complexes made up of smaller, manageable units, such as oligomeric ion channels. Labeling possibilities are usually limited to recombinant or synthesized proteins, and labeling strategies often follow models from a bioinformatics approach. In all cases, and in common with most membrane studies, sample preparation is vital, and this activity alone can take considerable effort before NMR can be applied--peptide or protein production (synthesis or expression) followed by reconstitution into bilayers and resolution of suitable sample geometry is still technically challenging. As experience is gained in the field, this development time should decrease. Here, the practical aspects of the use of solid-state NMR for membrane protein structural determinations are presented, as well as how the methodology can be applied. Some successes to date are discussed, with an indication of how the area might develop.

Combined quantitative and mechanistic study of drug-membrane interactions using a novel 2H NMR approach.

Several analytical methods are available for determining the partition coefficients of drug compounds in model phospholipid membranes, but such methods provide little information at the molecular level about how the membrane affinity of drugs relates to their interactions with the lipid molecules. A new (2)H nuclear magnetic resonance (NMR) approach has been developed here that quantifies the affinity of (2)H-labeled small molecules for different phospholipid membranes and, simultaneously, provides information on the mechanism of the drug-membrane interaction. In the example given, (2)H NMR analysis of a weakly basic ion pump inhibitor found that the drug partitioned preferentially into membranes of predominantly unsaturated or short-chain phospholipids. The (2)H NMR analysis also suggested that the membrane specificity of the drug was directly correlated to the ability of its phenyl moiety to penetrate into the interior of the lipid bilayer. The (2)H NMR approach could be of value in guiding medicinal chemistry toward or away from structures promoting interactions with specific types of biological membranes.

Lipid-dependent GPCR dimerization.

It has been widely demonstrated that G protein-coupled receptors (GPCRs) can form dimers both in vivo and in vitro, a process that has functional consequences. These receptor-receptor interactions take place within a phospholipid bilayer, yet, generally, little is known of the requirements for specific lipids that mediate the dimerization process. Studying this phenomenon in vivo is challenging due to difficulties in modulating the lipid content of cell membranes. Therefore, in this chapter, we describe techniques for reconstitution of GPCRs into model lipid bilayers of defined composition. The concentrations of specific lipids and sterols can be precisely controlled in these liposomes, as well as maintaining an appropriate lipid-protein ratio to avoid artifactual interactions. Receptor dimerization in this system is monitored via Förster resonance energy transfer (FRET), which requires the use of fluorescently labeled receptors. We therefore also include protocols for labeling with appropriate fluorophores and determining the apparent FRET efficiency, a measurement of the extent of receptor dimerization. Understanding the lipid dependence of GPCR dimerization will be key in understanding how this process is regulated in the dynamic heterogeneous environment of the cell membrane.

A spectrometer designed for 6.7 and 14.1 T DNP-enhanced solid-state MAS NMR using quasi-optical microwave transmission.

A Dynamic Nuclear Polarisation (DNP) enhanced solid-state Magic Angle Spinning (MAS) NMR spectrometer operating at 6.7 T is described and demonstrated. The 187 GHz TE(13) fundamental mode of the FU CW VII gyrotron is used as the microwave source for this magnetic field strength and 284 MHz (1)H DNP-NMR. The spectrometer is designed for use with microwave frequencies up to 395 GHz (the TE(16) second-harmonic mode of the gyrotron) for DNP at 14.1T (600 MHz (1)H NMR). The pulsed microwave output from the gyrotron is converted to a quasi-optical Gaussian beam using a Vlasov antenna and transmitted to the NMR probe via an optical bench, with beam splitters for monitoring and adjusting the microwave power, a ferrite rotator to isolate the gyrotron from the reflected power and a Martin-Puplett interferometer for adjusting the polarisation. The Gaussian beam is reflected by curved mirrors inside the DNP-MAS-NMR probe to be incident at the sample along the MAS rotation axis. The beam is focussed to a ~1 mm waist at the top of the rotor and then gradually diverges to give much more efficient coupling throughout the sample than designs using direct waveguide irradiation. The probe can be used in triple channel HXY mode for 600 MHz (1)H and double channel HX mode for 284 MHz (1)H, with MAS sample temperatures ≥85 K. Initial data at 6.7 T and ~1 W pulsed microwave power are presented with (13)C enhancements of 60 for a frozen urea solution ((1)H-(13)C CP), 16 for bacteriorhodopsin in purple membrane ((1)H-(13)C CP) and 22 for (15)N in a frozen glycine solution ((1)H-(15)N CP) being obtained. In comparison with designs which irradiate perpendicular to the rotation axis the approach used here provides a highly efficient use of the incident microwave beam and an NMR-optimised coil design.

Channel activity of a viral transmembrane peptide in micro-BLMs: Vpu(1-32) from HIV-1.

We report for the first time on pore-suspending lipid bilayers, which we call micro-black lipid membranes (micro-BLMs), based on a highly ordered macroporous silicon array. Micro-BLMs were established by first functionalizing the backside porous silicon surface with gold and then chemisorbing 1,2-dipalmitoyl-sn-glycero-3-phosphothioethanol followed by spreading 1,2-diphytanoyl-sn-glycero-3-phosphocholine dissolved in n-decane. Impedance spectroscopy revealed the formation of single lipid bilayers confirmed by a mean specific capacitance of 0.6 +/- 0.2 microF/cm2. Membrane resistances were in the G omega-regime and beyond. The potential of the system for single channel recordings was demonstrated by inserting the transmembrane domain of the HIV-1 accessory peptide Vpu(1-32), which forms helix bundles with characteristic opening states. We elucidated different amilorides as potential drugs to inhibit channel activity of Vpu.