Design and preparation of Ti-xFe antibacterial titanium alloys based on micro-area potential difference.

Fe was selected as an alloying element for the first time to prepare a new antibacterial titanium alloy based on micro-area potential difference (MAPD) antibacterial mechanism. The microstructure, the corrosion resistance, the mechanical properties, the antibacterial properties and the cell biocompatibility have been investigated in detail by optical microscopy, scanning electron microscopy, electrochemical testing, mechanical property test, plate count method and cell toxicity measurement. It was demonstrated that heat treatment had a significant on the compressive mechanical properties and the antibacterial properties. Ti-xFe (x = 3,5 and 9) alloys after 850 °C/3 h + 550 °C/62 h heat treatment exhibited strong antimicrobial properties with an antibacterial rate of more than 90% due to the MAPD caused by the redistribution of Fe element during the aging process. In addition, the Fe content and the heat treatment process had a significant influence on the mechanical properties of Ti-xFe alloy but had nearly no effect on the corrosion resistance. All Ti-xFe alloys showed non-toxicity to the MC3T3 cell line in comparison with cp-Ti, indicating that the microzone potential difference had no adverse effect on the corrosion resistance, cell proliferation, adhesion, and spreading. Strong antibacterial properties, good cell compatibility and good corrosion resistance demonstrated that Ti-xFe alloy might be a candidate titanium alloy for medical applications.

Feasibility study on Ti-15Mo-7Cu with low elastic modulus and high antibacterial property.

Titanium and titanium alloy with low density, high specific strength, good biological, excellent mechanical compatibility and easy to process have been widely used in the medical materials, but their application in orthopedics and dentistry often face bacterial infection, corrosion failure and stress shielding. In this paper, Ti-15Mo-7Cu (TM-7Cu) alloy was prepared by high vacuum non-consumable electric arc melting furnace and then treated by solution and aging treatment. The microstructure, mechanical properties, antibacterial properties and cytocompatibility were studied by X-ray diffraction, microhardness tester, electrochemical working station, antibacterial test and Live/Dead staining technology. The results have shown that the heat treatment significantly influenced the phase transformation, the precipitation of Ti2Cu phase, the elastic modulus and the antibacterial ability. With the extension of the aging time, the elastic modulus slightly increased and the antibacterial rate obviously increased. TM-7Cu alloy with a low elastic modulus of 83GPa and a high antibacterial rate of > 93% was obtained. TM-7Cu alloy showed no cytotoxicity to MC3T3. It was suggested that TM-7Cu might be a highly competitive medical material.

Implementation of a Specific Set of Intraoperative C-Arm Fluoroscopy Terminologies in Percutaneous Vertebroplasty.

OBJECTIVE: Percutaneous vertebroplasty (PVP) is currently the primary minimally invasive surgical approach for treating vertebral compression fractures caused by senile osteoporosis. The current existing problem is the lack of research on the application of a specific set of intraoperative C-arm fluoroscopy terminologies in PVP. Therefore, the purpose of this study is to explore the use of a specific set of intraoperative C-arm fluoroscopic terminologies in PVP in order to increase fluoroscopy accuracy, decrease fluoroscopy frequencies and ray protection, and minimize operation times through rapid preoperative training of surgeons and radiographers. METHODS: Spine surgeons and radiographers with at least 5 years of experience from nine different hospitals were randomly selected for a series of specialized intraoperative C-arm fluoroscopy terminology training between October 2018 and December 2021. Before and after the training, they were surveyed using a five-point Likert scale to statistically compare their knowledge of the terminology. Simultaneously, 190 PVP cases completed by these surgeons and radiographers before and after the training were chosen for comparison and analysis of fluoroscopy times, effective fluoroscopy rate, fluoroscopy time, repeated puncture rate, and other indicators before and after receiving specialized terminology training. Two-sample tests were mainly used to investigate differences in answers between surgeons and radiographers. RESULTS: After the training, there was a notable improvement in the fluency of intraoperative communication between professional spine surgeons and radiographers. By comparing the indicators of pre-training with post-training, the effective anteroposterior fluoroscopy rate increased from 46.5% to 75.7%; the effective lateral fluoroscopy rate increased from 59.8% to 76.9%. Moreover, a notable decrease in communication barriers, fluoroscopy frequencies, fluoroscopy time, and the rate of repeated punctures, and a notable increase in the effective fluoroscopy rate was observed. CONCLUSION: Smooth intraoperative communication between professional spine surgeons and radiographers can significantly lower the communication barrier, reduce the fluoroscopy frequencies and time, the rate of repeated puncture, and increase the effective fluoroscopy rate, all of which are important in improving the fluoroscopy in PVP.

Comparison of percutaneous vertebroplasty and conservative treatment for one level thoracolumbar osteoporotic compression fracture in a 3-year study.

The efficacy of Mesh optimized versus standard percutaneous vertebroplasty (PVP) for osteoporotic vertebral compression fractures. Grid optimization (102 cases; 38 men, 64 women aged 67.3 ± 8.5) and traditional PVP groups (94 cases) were identified from 196 PVP patients treated from May 2016 to 2019. The optimal puncture site and angle forced bone cement into both groups before surgery. The main indexes were operation time, X-ray fluoroscopy times, bone cement injection volume, leakage, VAS, and injured vertebrae height. Preoperative general data were equivalent between groups (P > 0.05). All patients survived surgery without spinal cord injury, incision infection, pulmonary embolism, or death. The mesh optimization group had improved operation time (34.8 ± 6.5 min), fluoroscopy times (29.5 ± 5.5), bone cement injection volume (5.3 ± 2.1 ml), and bone cement permeability greater (3.9 percent; 4/98) than the standard PVP group (P < 0.05). Similarly, the grid optimization group had superior VAS scores (1.1 ± 0.6; 1.0 ± 0.3; and 0.9 ± 0.2) than the standard PVP group at 3 days, 3 months, and the last follow-up visit (P < 0.05). On day three after surgery, both had similar heights of injured vertebra's anterior and middle edges (P > 0.05). However, in the mesh optimization group, measurements improved to 1.8 ± 0.4 mm and (1.8 ± 0.3) mm by month three and to 1.7 ± 0.3 mm at last follow-up (P < 0.05). Mesh-optimized PVP with a mesh locator treats osteoporotic vertebral compression fractures more safely and effectively than regular PVP.

Combined Application of Grid Body Surface Locator and Preemptive Analgesia in Daytime Vertebroplasty.

Objective: To explore the clinical advantages of grid body surface locator combined with preemptive analgesia in the treatment of osteoporotic lumbar fractures in daytime vertebroplasty. Methods: A retrospective study was conducted on 120 patients who underwent lumbar vertebroplasty in the Department of Orthopedics of General Hospital of Northern Theater Command from January 2017 to January 2020. According to the preoperative planning and analgesic mode of treatment, they were divided into the daily operation experimental group and the traditional mode control group. Prone positioning of a patient under anesthetic is safe of ensuring optimum surgical access for many procedures, providing that the risks are fully understood. The general baseline data, intraoperative fluoroscopy times and operation time, bone cement injection volume, bone cement permeability, VAS score before operation, 1 day, and 3 months after operation, and the recovery of anterior vertebral height before and after operation were analyzed. Results: There was no statistically significant difference in the preoperative general data between the two groups. One day after operation, the VAS score of the experimental group was lower than that of the control group, but there was no difference after 3 months. The permeability of bone cement in the experimental group was lower than that in the control group, the height of anterior edge of injured vertebra was better than that in the control group, and the operation time was less than that in the control group. Conclusion: The daytime operation experimental group can significantly alleviate postoperative pain, increase the amount of bone cement injection, and reduce the permeability of bone cement through preoperative planning of puncture path and key puncture points, combined with advanced labor pain, but there is no significant difference in long-term pain relief.