Sustainable Biomass Lignin-Based Hydrogels: A Review on Properties, Formulation, and Biomedical Applications.

Different techniques have been developed to overcome the recalcitrant nature of lignocellulosic biomass and extract lignin biopolymer. Lignin has gained considerable interest owing to its attractive properties. These properties may be more beneficial when including lignin in the preparation of highly desired value-added products, including hydrogels. Lignin biopolymer, as one of the three major components of lignocellulosic biomaterials, has attracted significant interest in the biomedical field due to its biocompatibility, biodegradability, and antioxidant and antimicrobial activities. Its valorization by developing new hydrogels has increased in recent years. Furthermore, lignin-based hydrogels have shown great potential for various biomedical applications, and their copolymerization with other polymers and biopolymers further expands their possibilities. In this regard, lignin-based hydrogels can be synthesized by a variety of methods, including but not limited to interpenetrating polymer networks and polymerization, crosslinking copolymerization, crosslinking grafted lignin and monomers, atom transfer radical polymerization, and reversible addition-fragmentation transfer polymerization. As an example, the crosslinking mechanism of lignin-chitosan-poly(vinyl alcohol) (PVA) hydrogel involves active groups of lignin such as hydroxyl, carboxyl, and sulfonic groups that can form hydrogen bonds (with groups in the chemical structures of chitosan and/or PVA) and ionic bonds (with groups in the chemical structures of chitosan and/or PVA). The aim of this review paper is to provide a comprehensive overview of lignin-based hydrogels and their applications, focusing on the preparation and properties of lignin-based hydrogels and the biomedical applications of these hydrogels. In addition, we explore their potential in wound healing, drug delivery systems, and 3D bioprinting, showcasing the unique properties of lignin-based hydrogels that enable their successful utilization in these areas. Finally, we discuss future trends in the field and draw conclusions based on the findings presented.

Application of Millifluidics to Encapsulate and Support Viable Human Mesenchymal Stem Cells in a Polysaccharide Hydrogel.

Human adipose-derived stromal cells (hASCs) are widely known for their immunomodulatory and anti-inflammatory properties. This study proposes a method to protect cells during and after their injection by encapsulation in a hydrogel using a droplet millifluidics technique. A biocompatible, self-hardening biomaterial composed of silanized-hydroxypropylmethylcellulose (Si-HPMC) hydrogel was used and dispersed in an oil continuous phase. Spherical particles with a mean diameter of 200 µm could be obtained in a reproducible manner. The viability of the encapsulated hASCs in the Si-HPMC particles was 70% after 14 days in vitro, confirming that the Si-HPMC particles supported the diffusion of nutrients, vitamins, and glucose essential for survival of the encapsulated hASCs. The combination of droplet millifluidics and biomaterials is therefore a very promising method for the development of new cellular microenvironments, with the potential for applications in biomedical engineering.

Interpenetrated Si-HPMC/alginate hydrogels as a potential scaffold for human tissue regeneration.

Interpenetrated gels of biocompatible polysaccharides alginate and silanized hydroxypropyl methyl cellulose (Si-HPMC) have been studied in order to assess their potential as scaffolds for the regeneration of human tissues. Si-HPMC networks were formed by reduction of the pH to neutral and alginate networks were formed by progressive in situ release of Ca(2+). Linear and non-linear mechanical properties of the mixed gels at different polymer and calcium concentrations were compared with those of the corresponding single gels. The alginate/Si-HPMC gels were found to be stiffer than pure Si-HPMC gels, but weaker and more deformable than pure alginate gels. No significant difference was found for the maximum stress at rupture measured during compression for all these gels. The degrees of swelling or contraction in excess water at pH 7 as well as the release of Ca(2+) was measured as a function of time. Pure alginate gels contracted by as much as 50 % and showed syneresis, which was much reduced or even eliminated for mixed gels. The important release of Ca(2+) upon ageing for pure alginate gels was much reduced for the mixed gels. Furthermore, results of cytocompatibility assays indicated that there was no cytotoxicity of Si-HPMC/alginate hydrogels in 2D and 3D culture of human SW1353 cells. The results show that using interpenetrated Si-HPMC/alginate gels has clear advantages over the use of single gels for application in tissue regeneration.

Micro-CT Analysis of Radiation-Induced Osteopenia and Bone Hypovascularization in Rat.

Treatment of carcinomas of the upper aerodigestive tract often requires external radiation therapy. However, radiation affects all the components of bone, with different degrees of sensitivity, and may produce severe side effects such as mandibular osteoradionecrosis (ORN). Intraosseous vascularization is thought to be decreased after irradiation, but its impact on total bone volume is still controversial. The aim of this study was to compare intraosseous vascularization, cortical bone thickness, and total bone volume in a rat model of ORN versus nonirradiated rats, using a micro-computed tomography (micro-CT) analysis after intracardiac injection of a contrast agent. The study was performed on 8-week-old Lewis 1A rats (n = 14). Eleven rats underwent external irradiation on the hind limbs by a single 80-Gy dose. Three rats did not receive irradiation and served as controls for statistical analysis. Eight weeks after the external irradiation, all the animals received a barium sulfate intracardiac injection under general anesthesia. All samples were analyzed with the micro-computed tomography system at a resolution of 5.5 µm. The images were later processed to create 3D reconstructions and study vascularization, bone volume, and cortical thickness. Data from irradiated and nonirradiated rats were compared using the Kruskal-Wallis test. No animal died after irradiation. Nineteen irradiated tibias and six nonirradiated tibias were included for micro-CT analysis. The vessel percentage was significantly lower in irradiated bones (p = 0.0001). The distance between the vessels, a marker of vascular destruction, was higher after irradiation (p = 0.001). The vessels were also more altered distally after irradiation (p = 0.028). Cortical thickness was severely decreased after irradiation, sometimes even reduced to zero. Both trabecular and cortical structures were destroyed after irradiation, with wide bone gaps. Finally, both total bone volume (p = 0.0001) and cortical thickness (p = 0.0001) were significantly decreased in irradiated tibias compared to nonirradiated tibias. These results led to multiple spontaneous fractures in the irradiated group, and the destruction of intraosseous vessels observed macroscopically with the radiographic preview. This study revealed the impact of radiation on intraosseous vasculature and cortical bone with a micro-CT analysis in a rat ORN model. Hypovascularization and osteopenia are consistent with the literature, contributing a morphological scale with high resolution. Visualization of the vasculature by micro-CT is an innovative technique to see the changes after radiation, and should help adjust bone tissue engineering in irradiated bone.

Diagnostic value of VEGF in peri-implantitis and its correlation with titanium particles: A controlled clinical study.

OBJECTIVES: VEGF is prototypic marker of neovascularization, repeatedly proposed as intrinsic characteristic of peri-implantitis. This study aimed to assess pattern of VEGF in peri-implantitis, its correlation with titanium particles (TPs) and capacity as respective biomarker. MATERIAL AND METHODS: Pathological specificity of VEGF was assessed in peri-implant granulations using immunohistochemistry, periodontal granulations represented Ti-free positive controls. VEGF was correlated to TPs, identified using scanning electron microscopy coupled with dispersive x-ray spectrometry. Diagnostic accuracy, sensitivity and specificity of VEGF were estimated in PICF specimens from peri-implantitis, peri-implant mucositis (PIM) and healthy peri-implant tissues (HI) using machine learning algorithms. RESULTS: Peri-implantitis exhibited rich neovascular network with expressed density in contact zones toward neutrophil infiltrates without specific pattern variations around TPs, identified in all peri-implantitis specimens (mean particle size 8.9 ± 24.8 µm2; Ti-mass (%) 0.380 ± 0.163). VEGF was significantly more expressed in peri-implantitis (47,065 ± 24.2) compared to periodontitis (31,14 ± 9.15), and positively correlated with its soluble concentrations in PICF (p = 0.01). VEGF was positively correlated to all clinical endpoints and significantly increased in peri-implantitis compared to both PIM and HI, but despite high specificity (96%), its overall diagnostic capacity was average. Two patient clusters were identified in peri-implantitis, one with 8-fold higher VEGF values compared to HI, and second with lower values comparable to PIM. SIGNIFICANCE: VEGF accurately reflects neovascularization in peri-implantitis that was expressed in contact zones toward implant surface without specific histopathological patter variation around TPs. VEGF answered requests for biomarker of peri-implantitis but further research is necessary to decrypt its exact underlying cause.

Nanocomposite hydrogels for cartilage tissue engineering: mesoporous silica nanofibers interlinked with siloxane derived polysaccharide.

Injectable materials for mini-invasive surgery of cartilage are synthesized and thoroughly studied. The concept of these hybrid materials is based on providing high enough mechanical performances along with a good medium for chondrocytes proliferation. The unusual nanocomposite hydrogels presented herein are based on siloxane derived hydroxypropylmethylcellulose (Si-HPMC) interlinked with mesoporous silica nanofibers. The mandatory homogeneity of the nanocomposites is checked by fluorescent methods, which show that the silica nanofibres dispersion is realized down to nanometric scale, suggesting an efficient immobilization of the silica nanofibres onto the Si-HPMC scaffold. Such dispersion and immobilization are reached thanks to the chemical affinity between the hydrophilic silica nanofibers and the pendant silanolate groups of the Si-HPMC chains. Tuning the amount of nanocharges allows tuning the resulting mechanical features of these injectable biocompatible hybrid hydrogels. hASC stem cells and SW1353 chondrocytic cells viability is checked within the nanocomposite hydrogels up to 3 wt% of silica nanofibers.

The association of hydrogel and biphasic calcium phosphate in the treatment of dehiscence-type peri-implant defects: an experimental study in dogs.

Hydrogel polymers have many applications in regenerative medicine. The aim of this study in dogs was to investigate bone regeneration in dehiscence-type peri-implant defects created surgically and treated with (i) biphasic calcium phosphate (BCP) granules alone; (ii) a composite putty hydroxypropyl methylcellulose (HPMC)/BCP (MBCP/putty); and (iii) a polymer crosslinked membrane of silanized-HPMC (Si-HPMC/BCP) compared with empty controls. At 3 months, new bone formation was significantly more important in defects filled with HPMC/BCP or Si-HPMC/BCP compared with spontaneous healing in control (P = 0.032 and P = 0.046 respectively) and more substantial compared with BCP alone. Furthermore, new bone formation in direct contact with the implant surface was observed in all three groups treated with BCP. The addition of HPMC to the BCP granules may have enhanced the initial stability of the material within the blood clot in these large and complex osseous defects. The Si-HPMC hydrogel may also act as an occlusive membrane covering the BCP, which could improve the stability of the granules in the defect area. However, the crosslinking time of the Si-HPMC is too long for easy handling and the mechanical properties remain to be improved. The composite MBCP/putty appears to be a valuable bone-graft material in complex defects in periodontology and implantology. These encouraging results should now be confirmed in clinical studies.

A recall program for the outcome of conventional root canal treatment performed in a teaching hospital.

OBJECTIVES: This study investigated the long-term survival and the prognostic factors of endodontic treatments performed in a dental teaching hospital. The aim was to calculate the probabilities of success or failure according to the follow-up extent and to assess the time allowed for a complete periapical healing. MATERIALS AND METHODS: A cohort of 185 teeth were re-examined 1-4 years after treatment. The outcome was assessed on the basis of radiographic and clinical criteria as success, uncertain or failure. A survival analysis using the Cox model was used (i) to explore tooth survival and periapical healing over the time and (ii) to highlight the predictive factors of treatment outcome. RESULTS: After 2 years, the appearance of an apical periodontitis remained lower than 3.5%, whereas only 22.8% of periapical healed cases were notified. The prognosis factors are: (i) for teeth with initial healthy periapical conditions, coronal leakage (p = 0.002) with the higher risk of failure (RR = 19.77), absence of correspondence filling length/shaping = 0.026), type of teeth (p = 0.041) and (ii) for teeth with apical periodontitis, number of root canals (p = 0.000,91), correspondence filling length/shaping length (p = 0.017) and over-filling (p = 0.09). New periapical lesions or tooth loss were recorded after 2 years. Half of the successful cases of periapical healing were observed during the follow-up from 2-4 years. CONCLUSIONS: This longitudinal study shows that coronal leakage is responsible for late failure and that periapical healing is long to achieve. Therefore, endodontic treatments may require a follow-up of over 2 years.

Injection of calcium phosphate pastes: prediction of injection force and comparison with experiments.

Calcium phosphate ceramics suspensions (ICPCS) are used in bone and dental surgery as injectable bone substitutes. This ICPCS biomaterial associates biphasic calcium phosphate (BCP) granules with hydroxypropylmethylcellulose (HPMC) polymer. Different ICPCS were prepared and their rheological properties were evaluated in parallel disks geometry as a function of the BCP weight ratio (35, 40, 45 and 50 %). The suspensions show a strongly increased viscosity as compared to the suspending fluid and the high shear rate part of the flow curve can be fitted with a power law model (Ostwald-de Waele model). The fitting parameters depend on the composition of the suspension. A simple device has been used to characterize extrusion of the paste using a disposable syringe fitted with a needle. The injection pressure of four ICPCS formulations was studied under various conditions (needle length and radius and volumetric flow rate), yielding an important set of data. A theoretical approach based on the capillary flow of non-Newtonian fluids was used to predict the necessary pressure for injection, on the basis of flow curves and extrusion conditions. The extrusion pressure calculated from rheological data shows a quantitative agreement with the experimental one for model fluids (Newtonian and HPMC solution) but also for the suspension, when needles with sufficiently large diameters as compared to the size of particles, are used. Depletion and possibly wall slip is encountered in the suspensions when narrower diameters are used, so that the injection pressure is less than that anticipated. However a constant proportionality factor exists between theory and injection experiments. The approach developed in this study can be used to correlate the rheological parameters to the necessary pressure for injection and defines the pertinent experimental conditions to obtain a quantitative agreement between theory and experiments.

Assay of in vitro osteoclast activity on dentine, and synthetic calcium phosphate bone substitutes.

Resorption of synthetic bone substitute materials is essential for the integration of these materials into the natural bone remodeling process. Osteoclast behavior in the presence of calcium phosphate bioceramics (CaPB) is partially understood, and a better understanding of the underlying mechanisms is expected to facilitate the development of new synthetic bone substitutes to improve bone regeneration. In the present study, our aim was to investigate osteoclastic resorption of various synthetic CaPB. We used neonatal total rabbit bone cells to generate osteoclasts. Osteoclast-generated resorption on dentine and multiple CaPB was investigated by quantifying the surface resorbed and measuring tartrate resistant acid phosphatase (TRAP) enzyme activity. In this study, we observed that osteoclastic cells responded in a different way to each substrate. Both dentine and CaPB were resorbed but the quantitative results for the surface resorbed and TRAP activity showed a specific response to each substrate and that increased mineral density seemed to inhibit osteoclast activity.

Material-Assisted Strategies for Osteochondral Defect Repair.

The osteochondral (OC) unit plays a pivotal role in joint lubrication and in the transmission of constraints to bones during movement. The OC unit does not spontaneously heal; therefore, OC defects are considered to be one of the major risk factors for developing long-term degenerative joint diseases such as osteoarthritis. Yet, there is currently no curative treatment for OC defects, and OC regeneration remains an unmet medical challenge. In this context, a plethora of tissue engineering strategies have been envisioned over the last two decades, such as combining cells, biological molecules, and/or biomaterials, yet with little evidence of successful clinical transfer to date. This striking observation must be put into perspective with the difficulty in comparing studies to identify overall key elements for success. This systematic review aims to provide a deeper insight into the field of material-assisted strategies for OC regeneration, with particular considerations for the therapeutic potential of the different approaches (with or without cells or biological molecules), and current OC regeneration evaluation methods. After a brief description of the biological complexity of the OC unit, the recent literature is thoroughly analyzed, and the major pitfalls, emerging key elements, and new paths to success are identified and discussed.

Non-monotonous enzyme-assisted self-assembly profiles resulting from reaction-diffusion processes in host gels.

Reaction-diffusion (RD) processes are responsible for surface and in-depth micropatterning in inanimate and living matter. Here we show that enzyme-assisted self-assembly (EASA) of peptides is a valuable tool to functionnalize host gels. By using a phosphatase distributed in a host hydrogel, the diffusion of phosphorylated peptides from a liquid/host gel interface leads to the spontaneous formation of a pattern of dephosphorylated peptide self-assembly presenting at least two self-assembly maxima. Variation of enzyme and peptide concentrations change the pattern characteristics. When a peptide drop is deposited on a phosphatase functionalized gel, a self-assembly pattern is also formed both along the gel-solution interface and perpendicular to the interface. This self-assembly pattern induces a local change of the gel mechanical properties measured by nanoindentation. Its appearance relies on the formation of self-assembled structures by nucleation and growth processes which are static in the hydrogel. This process presents great similarities with the Liesegang pattern formation and must be taken into account for the functionalization of hydrogels by EASA. A mechanism based on RD is proposed leading to an effective mathematical model accounting for the pattern formation. This work highlights EASA as a tool to design organic Liesegang-like microstructured materials with potential applications in biomaterials and artificial living systems design.

Design and characterization of an in vivo injectable hydrogel with effervescently generated porosity for regenerative medicine applications.

Injectable hydrogels that polymerize directly in vivo hold significant promises in clinical settings to support the repair of damaged or failing tissues. Existing systems that allow cellular and tissue ingrowth after injection are limited because of deficient porosity and lack of oxygen and nutrient diffusion inside the hydrogels. Here is reported for the first time an in vivo injectable hydrogel in which the porosity does not pre-exist but is formed concomitantly with its in situ injection by a controlled effervescent reaction. The hydrogel tailorable crosslinking, through the reaction of polyethylene glycol with lysine dendrimers, allows the mixing and injection of precursor solutions from a dual-chamber syringe while entrapping effervescently generated CO2 bubbles to form highly interconnected porous networks. The resulting structures allow preserving modular mechanical properties (from 12.7 ± 0.9 to 29.9 ± 1.7 kPa) while being cytocompatible and conducive to swift cellular attachment, proliferation, in-depth infiltration and extracellular matrix deposition. Most importantly, the subcutaneously injected porous hydrogels are biocompatible, undergo tissue remodeling and support extensive neovascularisation, which is of significant advantage for the clinical repair of damaged tissues. Thus, the porosity and injectability of the described effervescent hydrogels, together with their biocompatibility and versatility of mechanical properties, open broad perspectives for various regenerative medicine or material applications, since effervescence could be combined with a variety of other systems of swift crosslinking. STATEMENT OF SIGNIFICANCE: A major challenge in hydrogel design is the synthesis of injectable formulations allowing easy handling and dispensing in the site of interest. However, the lack of adequate porosity inside hydrogels prevent cellular entry and, therefore, vascularization and tissue ingrowth, limiting the regenerative potential of a vast majority of injectable hydrogels. We describe here the development of an acellular hydrogel that can be injected directly in situ while allowing the simultaneous formation of porosity. Such hydrogel would facilitate handling through injection while providing a porous structure supporting vascularization and tissue ingrowth.

Standardized and axially vascularized calcium phosphate-based implants for segmental mandibular defects: A promising proof of concept.

The reconstruction of massive segmental mandibular bone defects (SMDs) remains challenging even today; the current gold standard in human clinics being vascularized bone transplantation (VBT). As alternative to this onerous approach, bone tissue engineering strategies have been widely investigated. However, they displayed limited clinical success, particularly in failing to address the essential problem of quick vascularization of the implant. Although routinely used in clinics, the insertion of intrinsic vascularization in bioengineered constructs for the rapid formation of a feeding angiosome remains uncommon. In a clinically relevant model (sheep), a custom calcium phosphate-based bioceramic soaked with autologous bone marrow and perfused by an arteriovenous loop was tested to regenerate a massive SMD and was compared to VBT (clinical standard). Animals did not support well the VBT treatment, and the study was aborted 2 weeks after surgery due to ethical and animal welfare considerations. SMD regeneration was successful with the custom vascularized bone construct. Implants were well osseointegrated and vascularized after only 3 months of implantation and totally entrapped in lamellar bone after 12 months; a healthy yellow bone marrow filled the remaining space. STATEMENT OF SIGNIFICANCE: Regenerative medicine struggles with the generation of large functional bone volume. Among them segmental mandibular defects are particularly challenging to restore. The standard of care, based on bone free flaps, still displays ethical and technical drawbacks (e.g., donor site morbidity). Modern engineering technologies (e.g., 3D printing, digital chain) were combined to relevant surgical techniques to provide a pre-clinical proof of concept, investigating for the benefits of such a strategy in bone-related regenerative field. Results proved that a synthetic-biologics-free approach is able to regenerate a critical size segmental mandibular defect of 15 cm3 in a relevant preclinical model, mimicking real life scenarii of segmental mandibular defect, with a full physiological regeneration of the defect after 12 months.

Treatment of periodontal defects in dogs using an injectable composite hydrogel/biphasic calcium phosphate.

An injectable composite silanized hydroxypropyl methyl cellulose/biphasic calcium phosphate (Si-HPMC/BCP) has been investigated in humans with promising results. The aim of this study was to evaluate his efficacy for treating periodontal defects (canine fenestration and premolar furcation) in dog models. At 3 months, we observed that bone formation around BCP particles in furcation model is more discernible but not statistically significant in defects filled with Si-HPMC/BCP compared to healing in control. We suggest that BCP particles sustain the bone healing process by osteoconduction, while the Si-HPMC hydrogel enhances intergranular cohesion and acts as an exclusion barrier. Furthermore, bone ingrowth is not so distinctive in superficial defects where the biomaterial appears unstable. These results with Si-HPMC/BCP are encouraging. In addition, this biomaterial is easy to use and simplifies the process of filling periodontal lesions. However, more researches are needed to improve the viscosity and hardness to adjust the material to the specificities of periodontal defects.

Injectable silanized hyaluronic acid hydrogel/biphasic calcium phosphate granule composites with improved handling and biodegradability promote bone regeneration in rabbits.

Biphasic calcium phosphate (BCP) granules are osteoconductive biomaterials used in clinics to favor bone reconstruction. Yet, poor cohesivity, injectability and mechanical properties restrain their use as bone fillers. In this study, we incorporated BCP granules into in situ forming silanized hyaluronic acid (Si-HA) and hydroxypropylmethylcellulose (Si-HPMC) hydrogels. Hydrogel composites were shown to be easily injectable (F < 30 N), with fast hardening properties (<5 min), and similar mechanical properties (E∼ 60 kPa). In vivo, both hydrogels were well tolerated by the host, but showed different biodegradability with Si-HA gels being partially degraded after 21d, while Si-HPMC gels remained stable. Both composites were easily injected into critical size rabbit defects and remained cohesive. After 4 weeks, Si-HPMC/BCP led to poor bone healing due to a lack of degradation. Conversely, Si-HA/BCP composites were fully degraded and beneficially influenced bone regeneration by increasing the space available for bone ingrowth, and by accelerating BCP granules turnover. Our study demonstrates that the degradation rate is key to control bone regeneration and that Si-HA/BCP composites are promising biomaterials to regenerate bone defects.

Refining the mandibular osteoradionecrosis rat model by in vivo longitudinal µCT analysis.

Osteoradionecrosis (ORN) is one of the most feared side effects of radiotherapy following cancers of the upper aero-digestive tract and leading to severe functional defects in patients. Today, our lack of knowledge about the physiopathology restricts the development of new treatments. In this study, we refined the ORN rat model and quantitatively studied the progression of the disease. We tested the impact of radiation doses from 20 to 40 Gy, delivered with incident 4MV X-ray beams on the left mandible of the inbred Lewis Rat. We used micro-computed tomography (µCT) to obtain in vivo images for longitudinal bone imaging and ex vivo images after animal perfusion with barium sulphate contrast agent for vessel imaging. We compared quantification methods by analyzing 3D images and 2D measurements to determine the most appropriate and precise method according to the degree of damage. We defined 25 Gy as the minimum irradiation dose combined with the median molar extraction necessary to develop non-regenerative bone necrosis. µCT image analyses were correlated with clinical and histological analyses. This refined model and accurate methods for bone and vessel quantification will improve our knowledge of the progression of ORN pathology and allow us to test the efficacy of new regenerative medicine procedures.

Versatile lysine dendrigrafts and polyethylene glycol hydrogels with inherent biological properties: in vitro cell behavior modulation and in vivo biocompatibility.

Poly(ethylene glycol) (PEG) hydrogels have been extensively used as scaffolds for tissue engineering applications, owing to their biocompatibility, chemical versatility, and tunable mechanical properties. However, their bio-inert properties require them to be associated with additional functional moieties to interact with cells. To circumvent this need, we propose here to reticulate PEG molecules with poly(L-lysine) dendrigrafts (DGL) to provide intrinsic cell functionalities to PEG-based hydrogels. The physico-chemical characteristics of the resulting hydrogels were studied in regard of the concentration of each component. With increasing amounts of DGL, the cross-linking time and swelling ratio could be decreased, conversely to mechanical properties, which could be tailored from 7.7 ± 0.7 to 90 ± 28.8 kPa. Furthermore, fibroblasts adhesion, viability, and morphology on hydrogels were then assessed. While cell adhesion significantly increased with the concentration of DGL, cell viability was dependant of the ratio of DGL and PEG. Cell morphology and proliferation; however, appeared mainly related to the overall hydrogel rigidity. To allow cell infiltration and cell growth in 3D, the hydrogels were rendered porous. The biocompatibility of resulting hydrogels of different compositions and porosities was evaluated by 3 week subcutaneous implantations in mice. Hydrogels allowed an extensive cellular infiltration with a mild foreign body reaction, histological evidence of hydrogel degradation, and neovascularization.

A partially demineralized allogeneic bone graft: in vitro osteogenic potential and preclinical evaluation in two different intramembranous bone healing models.

In skeletal surgical procedures, bone regeneration in irregular and hard-to-reach areas may present clinical challenges. In order to overcome the limitations of traditional autologous bone grafts and bone substitutes, an extrudable and easy-to-handle innovative partially demineralized allogenic bone graft in the form of a paste has been developed. In this study, the regenerative potential of this paste was assessed and compared to its clinically used precursor form allogenic bone particles. Compared to the particular bone graft, the bone paste allowed better attachment of human mesenchymal stromal cells and their commitment towards the osteoblastic lineage, and it induced a pro-regenerative phenotype of human monocytes/macrophages. The bone paste also supported bone healing in vivo in a guide bone regeneration model and, more interestingly, exhibited a substantial bone-forming ability when implanted in a critical-size defect model in rat calvaria. Thus, these findings indicate that this novel partially demineralized allogeneic bone paste that combines substantial bone healing properties and rapid and ease-of-use may be a promising alternative to allogeneic bone grafts for bone regeneration in several clinical contexts of oral and maxillofacial bone grafting.

Kinetic studies of a composite carbon nanotube-hydrogel for tissue engineering by rheological methods.

Here we used rheological methods to study the gelation kinetics of silanized hydroxypropylmethylcellulose (HPMC-Si) hydrogel for tissue engineering. Firstly, the gelation time was determined from the independence of tan delta on frequency, and the Arrhenius law was applied to obtain the apparent activation energy of gelation, which was found to be about 109.0 kJ/mol. Secondly, the gelation process was monitored by measuring the sample storage modulus. The results showed that the gelation process could be well classified as a second-order reaction. In addition, a composite HPMC-Si/MWNTs hydrogel system for potential cartilage tissue engineering was investigated. The comparison of pure HPMC-Si hydrogel and composite HPMC-Si/MWNTs systems indicated that the addition of MWNTs could increase the mechanical strength of hydrogel without changing the gelation mechanism of the system.