RESUMO
After millions of years of evolution, biological chemical sensing systems (i.e., olfactory and taste systems) have become very powerful natural systems which show extreme high performances in detecting and discriminating various chemical substances. Creating field-effect sensors using biomaterials that are able to detect specific target chemical substances with high sensitivity would have broad applications in many areas, ranging from biomedicine and environments to the food industry, but this has proved extremely challenging. Over decades of intense research, field-effect sensors using biomaterials for chemical sensing have achieved significant progress and have shown promising prospects and potential applications. This review will summarize the most recent advances in the development of field-effect sensors using biomaterials for chemical sensing with an emphasis on those using functional biomaterials as sensing elements such as olfactory and taste cells and receptors. Firstly, unique principles and approaches for the development of these field-effect sensors using biomaterials will be introduced. Then, the major types of field-effect sensors using biomaterials will be presented, which includes field-effect transistor (FET), light-addressable potentiometric sensor (LAPS), and capacitive electrolyte-insulator-semiconductor (EIS) sensors. Finally, the current limitations, main challenges and future trends of field-effect sensors using biomaterials for chemical sensing will be proposed and discussed.
Assuntos
Materiais Biocompatíveis , Técnicas Biossensoriais , Eletrólitos , Potenciometria , SemicondutoresRESUMO
The fabrication of scaffolds with suitable chemical, physical, and electrical properties is critical for nerve cell adhesion and proliferation. Recently, electrical stimulation on conductive polymers has been applied to construct functional nerve cell scaffolds. Herein, we prepared natural polymer (cellulose)/conductive polymer nanofibrous mats, i.e., electrospun cellulose (EC)/poly N-vinylpyrrole (PNVPY) and EC/poly(3-hexylthiophene) (P3HT) through an efficient in situ polymerization method. The surface immobilization was characterized by optical microscopy (OM), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, hydrophilicity, porosity, and cyclic voltammetry. The OM and SEM images showed that PNVPY formed polymer coatings and aggregated nanoparticles on the EC nanofibers, while P3HT only produced polymer coatings. Compared with pure EC mats, both the composite mats had increased thickness, higher porosity, and higher conductivity. Also, an increase in hydrophilicity was found for EC/P3HT. In vivo cytocompatibility of the undifferentiated PC12 cells showed that the EC/PNVPY and EC/P3HT scaffolds exhibited favorable cell activity, adhesion, and proliferation. Furthermore, the results of electrical stimulation experiments indicated that the EC/P3HT mats could effectively promote the proliferation of the PC12 cells more than the EC and EC/PNVPY mats. The findings suggest a positive outcome regarding the conductive polymer-modified EC/PNVPY and EC/P3HT nanofibrous mats in neural tissue engineering.
Assuntos
Nanofibras , Engenharia Tecidual , Animais , Proliferação de Células , Celulose , Estimulação Elétrica , Polímeros , Ratos , Espectroscopia de Infravermelho com Transformada de Fourier , Alicerces TeciduaisRESUMO
Bacterial cellulose (BC), produced by bacteria and fungi, is a promising material in the biomedical field. However, non-antibacterial activity limits its broad applications. Herein, antibacterial composites (BC/ZIF-8-iodine) were prepared by loading iodine into zeolitic imidazolate framework-8 (ZIF-8) modified BC (BC/ZIF-8). BC/ZIF-8-iodine was well characterized by SEM, XRD, FTIR, XPS, Raman and contact angle analyses. The increase of ZIF-8 content augmented the loading capacity of iodine in BC/ZIF-8-iodine. Meanwhile, the adsorbed iodine can be released from BC/ZIF-8-iodine composites, following the Higuchi equation. A reduced sublimation of iodine was observed in BC/ZIF-8-iodine composites, indicating their good iodine preservation ability. BC/ZIF-8-iodine composites exhibited strong antibacterial activity towards Escherichia coli, Staphylococcus aureus and Candida albicans. XPS and Raman analyses indicated that the adsorbed iodine of BC/ZIF-8-iodine composites was in the form of I3-. The expected iodine loading, release and preservation behaviors of BC/ZIF-8-iodine composites ensure their antibacterial performance and suggest potential clinical applications.
Assuntos
Iodo , Zeolitas , Antibacterianos/farmacologia , Bactérias , Celulose/farmacologia , Escherichia coli , Iodetos , Iodo/farmacologia , Zeolitas/farmacologiaRESUMO
Light-addressable potentiometric sensor (LAPS) has been widely used in biomedical applications since its advent. As a member of the potentiometric sensors, ion-sensitive LAPS (ISLAPS) can be obtained by modifying ion selective sensing membrane on the sensor surface. Compared with the conventional ion-selective electrodes (ISEs) with liquid contact, the all-solid-state ISEs have more advantages such as easy maintenance, more convenient for miniaturization and practical applications. However, the commonly used ion-sensitive membrane (ISM) matrix like PVC has many limitations such as poor adhesion to silicone-based sensor and easy overflow of the plasticizer from the membrane. In this work, LAPS was combined with a variety of ionophore-doped all-solid-state silicone-rubber ISMs for the first time, to establish a program-controlled multiplexed ISLAPS system for physiological ions (Na+, K+, Ca2+ and H+) detection. The silicone-rubber ISMs have better adhesion to silicon-based sensors without containing plasticizers, which can avoid the plasticizer pollution and improve the long-term stability. A layer of poly(3-octylthiophene-2,5-diyl) (P3OT) was pre-modified on the sensor surface to inhibit the formation of an aqueous layer and improve the sensor lifetime. With the aid of a translation stage, the light spot automatically illuminated the detection sites in sequence, and the response of the four ions could be obtained in one measurement within 1 min. The proposed multiplexed ISLAPS has good sensitivity with micromolar limit of detection (LOD), good selectivity and long-term stability (more than 3 months). The results of the real Dulbecco's Modified Eagle Medium (DMEM) sample detection proved that the ISLAPS system can be used for the physiological ions detection, and is promising to realize a multi-parameter microphysiometer.
Assuntos
Borracha , Elastômeros de Silicone , Eletrodos Seletivos de Íons , Íons , PotenciometriaRESUMO
Etoposide (VP16) is the traditional antitumor agent which has been widely used in a variety of cancers. However, intravenous administration of VP16 was limited in clinical application because of its low aqueous solubility, poor bioavailability and dose-limiting adverse effects. Local chemotherapy with VP16-loaded drug delivery systems could provide a continuous release of drug at the target site, while minimizing the systemic toxicity. In this study, we prepared the poly-l-lactic acid (PLLA) based VP16-loaded implants (VP16 implants) by the direct compression method. The VP16 implants were characterized with regards to drug content, micromorphology, drug release profiles, differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR) analyses. Furthermore, the biodistribution of VP16 via intratumoral chemotherapy with VP16 implants was investigated using the murine Lewis lung carcinoma model. Our results showed that VP16 dispersed homogenously in the polymeric matrix. Both in vitro and in vivo drug release profiles of the implants were characterized by high initial burst release followed by sustained release of VP16. The VP16 implants showed good compatibility between VP16 and the excipients. Intratumoral chemotherapy with VP16 implants resulted in significantly higher concentration and longer duration of VP16 in tumor tissues compared with single intraperitoneal injection of VP16 solution. Moreover, we found the low level of VP16 in plasma and normal organ tissues. These results suggested that intratumoral chemotherapy with VP16 implants enabled high drug concentration at the target site and has the potential to be used as a novel method to treat cancer.