Effects of air-abrasion pressure on mechanical and bonding properties of translucent zirconia.

OBJECTIVES: The purpose of this in vitro study was to investigate the effects of different air-abrasion pressures on flexural strength and shear bond strength of a translucent zirconia. MATERIALS AND METHODS: The translucent zirconia surface was treated with 50 µm abrasive alumina particles at different pressure: 0.1 MPa; 0.2 MPa; 0.3 MPa; 0.4 MPa; 0.5 MPa; untreated specimens were used as control group (n = 33). For each group, three-point bending test was used to evaluate the flexural strength, and surface characterizations were analyzed. Following adhesive bonding and water storage for 24 h, specimens were subdivided into groups baseline and aged (5000 thermocycles). Then, shear bond strength was measured and failure mode was recorded. Statistical analysis was performed with one-way ANOVA and Tukey test (α = 0.05). RESULTS: Increasing air-abrasion pressure (0.3 MPa, 0.4 MPa, and 0.5 MPa) decreased the flexural strength. Higher air-abrasion pressure resulted in rougher zirconia surfaces and caused more microcracks. The highest shear bond strength was obtained for zirconia surfaces abraded at 0.2 MPa (15.88 ± 2.70 MPa) and 0.3 MPa (14.32 ± 1.12 MPa). Aging did not decrease the strength for all groups except control group (p < 0.001). CONCLUSIONS: Air-abrasion with 50 µm abrasive alumina particles at 0.2 MPa could achieve good strength for translucent zirconia ceramics while maintaining adequate and durable bonding with resin cement. CLINICAL RELEVANCE: A total of 0.2 MPa is recommended for air-abrasion procedure applied before a dental restoration fabricated with translucent zirconia is bonded to resin cement.

Glass-ceramic resin-bonded fixed partial dentures for replacing a single premolar tooth: A prospective investigation with a 4-year follow-up.

STATEMENT OF PROBLEM: Resin-bonded fixed partial dentures (RBFPDs) are a reliable treatment option for the replacement of a single missing tooth. Glass-ceramic may be a promising material for the fabrication of RBFPDs, but clinical verification has been lacking. PURPOSE: The purpose of this prospective clinical study was to evaluate the outcomes of glass-ceramic RBFPDs on participants with a single missing premolar. MATERIAL AND METHODS: Twenty participants (6 men, 14 women; age range: 20 to 54 years) were treated with 2-retainer RBFPDs. These RBFPDs were made of lithium disilicate glass-ceramic (IPS e.max Press; Ivoclar Vivadent AG) and designed with improved C-shaped retention. These prostheses were evaluated at 6 months, 12 months, and annually thereafter and were classified as survival or failure. Analysis was performed with the Kaplan-Meier analysis (95% confidence interval). Modified United States Public Health Service (USPHS) criteria were used to rate the clinical performance. Parameters assessed were fracture, marginal integrity, marginal discoloration, color of restoration, secondary caries, and abutment mobility. RESULTS: Twenty RBFPDs were provided, 9 in the maxilla and 11 in the mandible. The mean observation time was 49.2 months (minimum 9 months, maximum 53 months). Nineteen RBFPDs were evaluated as having survived during the observation period with some acceptable marginal discoloration, 1 RBFPD had to be replaced because of fracture and secondary caries and was evaluated as a failure. The Kaplan-Meier analysis revealed a survival rate of 95% after a 4-year observation. CONCLUSIONS: The glass-ceramic RBFPDs in this study displayed a good survival rate and clinical performance, indicating that glass-ceramic RBFPDs might be a promising approach for the short-term replacement of a single premolar. However, further investigations are needed to determine the long-term outcome.

Novel Bioactive and Therapeutic Dental Polymeric Materials to Inhibit Periodontal Pathogens and Biofilms.

Periodontitis is a common infectious disease characterized by loss of tooth-supporting structures, which eventually leads to tooth loss. The heavy burden of periodontal disease and its negative consequence on the patient's quality of life indicate a strong need for developing effective therapies. According to the World Health Organization, 10⁻15% of the global population suffers from severe periodontitis. Advances in understanding the etiology, epidemiology and microbiology of periodontal pocket flora have called for antibacterial therapeutic strategies for periodontitis treatment. Currently, antimicrobial strategies combining with polymer science have attracted tremendous interest in the last decade. This review focuses on the state of the art of antibacterial polymer application against periodontal pathogens and biofilms. The first part focuses on the different polymeric materials serving as antibacterial agents, drug carriers and periodontal barrier membranes to inhibit periodontal pathogens. The second part reviews cutting-edge research on the synthesis and evaluation of a new generation of bioactive dental polymers for Class-V restorations with therapeutic effects. They possess antibacterial, acid-reduction, protein-repellent, and remineralization capabilities. In addition, the antibacterial photodynamic therapy with polymeric materials against periodontal pathogens and biofilms is also briefly described in the third part. These novel bioactive and therapeutic polymeric materials and treatment methods have great potential to inhibit periodontitis and protect tooth structures.

Multifunctional surface of the nano-morphic PEEK implant with enhanced angiogenic, osteogenic and antibacterial properties.

Polyetheretherketone (PEEK) is a high-performance polymer suitable for use in biomedical coatings. The implants based on PEEK have been extensively studied in dental and orthopedic fields. However, their inherent inert surfaces and poor osteogenic properties limit their broader clinical applications. Thus, there is a pressing need to produce a multifunctional PEEK implant to address this issue. In response, we developed sulfonated PEEK (sPEEK)-Cobalt-parathyroid hormone (PTH) materials featuring multifunctional nanostructures. This involved loading cobalt (Co) ions and PTH (1-34) protein onto the PEEK implant to tackle this challenge. The findings revealed that the controlled release of Co2+ notably enhanced the vascular formation and the expression of angiogenic-related genes, and offered antimicrobial capabilities for sPEEK-Co-PTH materials. Additionally, the sPEEK-Co-PTH group exhibited improved cell compatibility and bone regeneration capacity in terms of cell activity, alkaline phosphatase (ALP) staining, matrix mineralization and osteogenic gene expression. It surpassed solely sulfonated and other functionalized sPEEK groups, demonstrating comparable efficacy even when compared to the titanium (Ti) group. Crucially, animal experiments also corroborated the significant enhancement of osteogenesis due to the dual loading of cobalt ions and PTH (1-34). This study demonstrated the potential of bioactive Co2+ and PTH (1-34) for bone replacement, optimizing the bone integration of PEEK implants in clinical applications.

Effects of combined modification of sulfonation, oxygen plasma and silane on the bond strength of PEEK to resin.

OBJECTIVE: This study aimed to evaluate the combined effects of sulfonation, non-thermal oxygen plasma and silane on the shear bond strength (SBS) of PEEK to resin materials. MATERIALS AND METHODS: Two hundred and eighty specimens were randomly divided into four groups: (A) untreated; (B) sulfonation for 60 s; (C) oxygen plasma for 20 min; (D) sulfonation for 60 s and oxygen plasma for 20 min. According to the instructions, 120 samples (N = 30) were coated with silane, adhesive, and resin composites. Each group of bonding specimens was divided into two subgroups (n = 15) to measure immediate and post-aging SBS. The surface morphology and the interface between the samples and adhesive were analyzed through SEM. Physicochemical characteristics of the surface and mechanical properties were determined through XPS, FTIR, light interferometry, contact angle measurement, and three-point bending tests. RESULTS: Sulfonation produced a porous layer of approximately 20 µm thickness on the surface, and the oxygen plasma increased the O/C ratio and oxygen-containing groups of the sample surface. After coating with silane, the SBS values of sulfonated PEEK and plasma-treated PEEK increased (9.96 and 10.72 MPa, respectively), and dual-modified PEEK exhibited the highest SBS value (20.99 MPa), which was significantly higher than that of blank group (p > 0.01). After 10,000 thermal cycles, the dual-modified PEEK still displayed a favorable SBS (18.68 MPa). SIGNIFICANCE: Sulfonation strengthened the mechanical interlocking between PEEK and the resin while oxygen plasma established a chemical bonding between silane and PEEK. This dual modification of the surface microstructure and chemical state synergistically improved the bond strength of PEEK to resin and resulted in considerable long-term effects.

Enhancing bioactivity and biocompatibility of polyetheretherketone (PEEK) for dental and maxillofacial implants: A novel sequential soaking process.

Polyetheretherketone (PEEK) exhibits excellent biocompatibility, fatigue resistance, and an elastic modulus similar to bone, presenting broad application prospects in the field of dental and maxillofacial implants. However, the bioinertness of PEEK limits its applications. In this study, we developed a method to generate biocompatible and bioactive PEEK through a simple sequential soaking process, aimed at inducing bone differentiation and enhancing antibacterial properties. Initially, a three-dimensional (3D) porous network was introduced on the PEEK surface by soaking in concentrated sulfuric acid and water. Subsequently, the sulfonated PEEK surface was treated with oxygen plasma, followed by immersion in a dopamine solution to coat a polydopamine (PDA) layer. Finally, polydopamine phosphate ester-modified 3D porous PEEK was obtained through the reaction of phosphoryl chloride with surface phenolic hydroxyl groups. Systematic studies were conducted using scanning electron microscopy, X-ray photoelectron spectroscopy, water contact angle analysis, cell proliferation and adhesion, osteogenic gene expression detection, alkaline phosphatase staining, alizarin red staining, and bacterial culture. Overall, compared to unmodified PEEK, the modified PEEK significantly enhanced in vitro cell proliferation and adhesion, osteogenic differentiation, and antibacterial properties. The simple surface modification measures combined in this study may represent a promising technology and could facilitate the application of PEEK in dental and maxillofacial implants.

Effects of thermal cycling on bonding properties of novel low-shrinkage resin adhesive.

OBJECTIVES: The current study aimed to investigate the bonding properties of a novel low-shrinkage resin adhesive containing expanding monomer and epoxy resin monomer after thermal cycling aging treatment. METHODS: Expanding monomer of 3,9-diethyl-3,9-dimethylol-1,5,7,11-tetraoxaspiro-[5,5] undecane (DDTU) as an anti-shrinkage additive and unsaturated epoxy monomer of diallyl bisphenol A diglycidyl ether (DBDE) as a coupling agent were synthesized. A blend of DDTU and DBDE at a mass ratio of 1∶1, referred to as "UE", was added into the resin matrix at the mass fraction of 20% to prepare a novel low-shrinkage resin adhesive.Then, the methacrylate resin adhesive without UE was used as the blank control group, and a commercial resin adhesive system was selected as the commercial control group. Moreover, the resin-dentin bonding and micro-leakage testing specimens were prepared for the thermal cycling aging treatment. The bonding strength was tested, the fracture modes were calculated, the bonding fracture surface was observed by scanning electron microscope (SEM), and the dye penetration was used to evaluate the tooth-restoration marginal interface micro-leakage. All the data were analyzed statistically. RESULTS: After aging, the dentin bonding strength of the experimental group was (19.20±1.03) MPa without a significant decrease (P>0.05), that of the blank control group was (11.22±1.48) MPa with a significant decrease (P<0.05) and that of the commercial control group was (19.16±1.68) MPa without a significant decrease (P>0.05). The interface fracture was observed as the main fracture mode in each group after thermal cycling by SEM. The fractured bonding surfaces of the experimental group often occurred on the top of the hybrid layer, whereas those of the blank and commercial control groups mostly occurred on the bottom of the hybrid layer. Micro-leakage rating counts of specimens before and after thermal cycling were as follows: the experimental group was primarily 0 grade, thereby indicating that a relatively ideal marginal sealing effect could be achieved (P>0.05); meanwhile, the blank control group was primarily 1 grade, and the penetration depth of dye significantly increased after thermal cycling (P<0.05); the commercial control group was primarily 0 grade without statistical difference before and after thermal cycling (P>0.05), while a significant difference was observed between the commercial control group and experimental group after thermal cycling (P<0.05). CONCLUSIONS: The novel low-shrinkage resin adhesive containing 20%UE exhibited excellent bonding properties even after thermal cycling aging treatment, thereby showing a promising prospect for dental application.

Novel antimicrobial and self-healing dental resin to combat secondary caries and restoration fracture.

OBJECTIVE: Dental resin composites have been the most popular materials for repairing tooth decay in recent years. However, secondary caries and bulk fracture are the major hurdles that affect the lifetime of dental resin composites. This current study synthesized a novel antimicrobial and self-healing dental resin containing nanoparticle-modified self-healing microcapsules to combat secondary caries and restoration fracture. METHODS: Multifunctional dental resins containing 0-20% nanoparticle-modified self-healing microcapsules were prepared. The water contact angle, antimicrobial properties, mechanical properties, cell toxicity, and self-healing capability of the dental resins were tested. RESULTS: A novel multifunctional dental resin was synthesized. When the microcapsule mass fraction was 10%, the resin presented a strong bacteriostasis rate (80.3%) and excellent self-healing efficiency (66.1%), while the hydrophilicity, mechanical properties, and cell toxicity were not affected. SIGNIFICANCE: The novel antimicrobial self-healing dental resin is a promising candidate for use in clinical practice, which provides a simple and highly efficient strategy to combat secondary caries and restoration fracture. This novel dental resin also gives the inspiration to prolong the service life of dental restorations.

Novel low-shrinkage dental resin containing microcapsules with antibacterial and self-healing properties.

Dental resin restorations commonly fail because of fractures and secondary caries. The aim of this research was to synthesize a novel low-shrinkage dental resin with antibacterial and self-healing properties. The low-shrinkage dental resin was obtained by incorporating a 20 wt% anti-shrinkage mixture of an expanding monomer 3,9-diethyl-3,9-dimethylol -1,5,7,11-tetraoxaspiro[5,5] undecane and an epoxy resin monomer diallyl bisphenol A diglycidyl ether (1:1, referred as "UE") and different mass fractions of self-healing antibacterial microcapsules (0%, 2.5%, 5%, 7.5%, and 10%) were incorporated into the matrix to prepare multifunctional dental resin. Polymerization shrinkage, mechanical properties, antibacterial activity, self-healing ability, and cytotoxicity of this dental resin were evaluated. The polymerization volumetric shrinkage of resin containing 20 wt% UE and 7.5 wt% microcapsules was reduced by 30.12% (4.13% ± 0.42%) compared with control. Furthermore, it exhibited high antibacterial activity and a good self-healing efficiency of 71% without adversely affecting the mechanical property and cell viability. This novel multifunctional dental resin with low polymerization shrinkage and excellent antibacterial activity and self-healing capability has potential application as a dental resin material to decrease the incidence of fractures and secondary caries.

Surface-Confined Piezocatalysis Inspired by ROS Generation of Mitochondria Respiratory Chain for Ultrasound-Driven Noninvasive Elimination of Implant Infection.

Implant-associated infections (IAI) are great challenges to medical healthcare and human wellness, yet current clinical treatments are limited to the use of antibiotics and physical removal of infected tissue or the implant. Inspired by the protein/membrane complex structure and its generation of reactive oxygen species in the mitochondria respiration process of immune cells during bacteria invasion, we herein propose a metal/piezoelectric nanostructure embedded on the polymer implant surface to achieve efficient piezocatalysis for combating IAI. The piezoelectricity-enabled local electron discharge and the induced oxidative stress generated at the implant-bacteria interface can efficiently inhibit the activity of the attachedStaphylococcus aureusby cell membrane disruption and sugar energy exhaustion, possess high biocompatibility, and eliminate the subcutaneous infection by simply applying the ultrasound stimulation. For further demonstration, the treatment of root canal reinfection with simplified procedures has been achieved by using piezoelectric gutta-percha implanted in ex vivo human teeth. This surface-confined piezocatalysis antibacterial strategy, which takes advantage of the limited infection interspace, easiness of polymer processing, and noninvasiveness of sonodynamic therapy, has potential applications in IAI treatment.

Development of novel hydrophilic and antibacterial silicone rubber impression material for dental application.

OBJECTIVES: This investigation aimed to develop a novel hydrophilic and antibacterial silicone rubber impression material for dental application. METHODS: The basic formula of the new silicone rubber was determined on a preliminary study, and 6% polyether modified silicone oil was added as wetting agent to provide the hydrophilicity. No-vel nano-antibacterial inorganic fillers containing quaternary ammonium salt with long chain alkyl were incorporated into the hydrophilic silicone rubber impression materials at a mass fraction of 0%, 1%, 2%, 3%, 4%, or 5%. A commercial silicone rubber impression material was used as control. The mechanical properties, wettability, detail reproducibility, dimensional stability, and mixing time of silicone rubber materials were measured. Thin-film adhesion method and cell counting kit-8 method were used to detect the antibacterial property and cytotoxicity. Scanning electron microscopy (SEM) was chosen to observe the micromorphology of the novel silicone rubber. RESULTS: When the content of antibacterial filler exceeded 4%, the mechanical properties of the new silicone rubber decreased significantly (P<0.05). Compared with those of the control group, the contact angle and linear size change rate of different groups had no significant change at different time nodes, and the detail reproducibility was intact (P>0.05). The addition of antibacterial fillers had no significant effect on the mixing time (P>0.05). Adding 4% antibacterial fillers could result in the antibacterial rate of 95.26%, showing good antibacterial properties. No significant difference was found in the cytotoxicity of all groups (P>0.05). The SEM pictures of the cross section of the silicone rubber sample showed that the fillers had good compatibility with the silicone rubber matrix and distributed in the matrix evenly. CONCLUSIONS: A novel silicone rubber impression material containing 6% polyether modified silicone oil could obtain promising hydrophilic and antibacterial properties after being added with 4% antibacterial inorganic fillers.

Novel nanoparticle-modified multifunctional microcapsules with self-healing and antibacterial activities for dental applications.

OBJECTIVE: Although microcapsules (MCs) have been used for dental resins to achieve self-healing capabilities, the fragile organic shell and single healing event functions during the service period limit their use. Herein, a novel nanoparticle-modified MC with a nano-antibacterial inorganic filler (NIF) containing a quaternary ammonium salt was synthesized to address these issues. METHODS: MCs with 0 %-30 % NIFs were prepared via an in situ polymerization method and characterized their morphology, chemical composition, thermal stability, roughness, mechanical properties, and antibacterial effect. Subsequently, M-10 MCs were mixed into the resin matrix at a mass fraction of 7.5 %. The self-healing capability and cytotoxicity were evaluated. RESULTS: The introduction of nanomaterials enhances the shell of the MCs and endows them with an antibacterial effect. With the addition of NIFs, the roughness, modulus, and hardness values of MCs all increased (p < 0.05). The presence of M-10 MCs reduced the CFU by 2-3 orders of magnitude compared to the control group. The dental resin containing 7.5 % M-10 MCs obtained almost 69 % self-healing efficiency, without significantly compromising cell viability (p < 0.05). SIGNIFICANCE: Self-healing MCs with NIFs were prepared for the first time with strong antibacterial properties, a substantial self-healing capability, and low toxicity. This multifunctional MC is a promising candidate for use in dental resins to extend the service life and resolve the problem of bulk fracture and secondary caries.

Development of low-shrinkage dental adhesives via blending with spiroorthocarbonate expanding monomer and unsaturated epoxy resin monomer.

Polymerization shrinkage is one of the main drawbacks of dental resin adhesives. In this study, spiroorthocarbonate expanding monomer 3,9-diethyl-3,9-dimethylol -1,5,7,11-tetraoxaspiro-[5,5] undecane (DDTU) and unsaturated epoxy resin monomer Diallyl bisphenol A diglycidyl ether (DBDE) were synthesized and utilized as anti-shrinkage-coupling additive of methacrylate-based adhesives. Polymerization process and physicochemical properties including double bond conversion, polymerization shrinkage, compatibility, mechanical performance, thermal stability, contact angle, shear bond strength and cytotoxicity were characterized. Results indicated that adhesives containing anti-shrinkage-coupling additive had reduced volume shrinkage, improved compatibility and enhanced shear bond strength. When the amount of additive was 20 wt%, the volume shrinkage was decreased by 45.8% (4.17 ± 0.32%) and the shear bond strength was increased by 49.6% (19.64 ± 0.99 MPa). The results also showed that the use of additive had no adversely affect on double bond conversion and cytotoxicity. Therefore, novel low-shrinkage resin adhesives were prepared via blending with spiroorthocarbonate expanding monomer and unsaturated epoxy resin monomer.

Novel antibacterial dental resin containing silanized hydroxyapatite nanofibers with remineralization capability.

OBJECTIVES: Secondary caries is the primary issue that causes restoration failure. The objectives of this study were to: (1) synthesize silanized hydroxyapatite nanofibers loaded with erythromycin (s-HAFs@EM); (2) evaluate the mechanical property, antibacterial activity, and remineralization capability of the novel dental resin containing s-HAFs@EM. METHODS: s-HAFs were prepared by the solvothermal approach and loaded with EM. Characterization and antibacterial activity were evaluated. Subsequently, s-HAFs@EM were incorporated into dental resin at different mass fractions (5 %, 10 %, 15 %, and 20 %), and then they were submitted to characterization, including mechanical property, antibacterial activity, remineralization capability, and cytotoxicity. RESULTS: s-HAFs@EM were successfully synthesized, and they exhibited excellent antibacterial activity. Resin containing 15 % s-HAFs@EM exhibited the best flexural strength (118.67 ± 15.71 MPa) and elastic modulus (2.02 ± 0.30 GPa) (P < 0.05), which were increased by 65.43 % and 90.7 %, compared to those of neat resin, respectively. Resin with 15-20 % s-HAFs@EM showed high antibacterial rate (>85 %) when compared control group (P < 0.05). Furthermore, resin also exhibited a definite remineralization capability and good biosafety in vitro. SIGNIFICANCE: This novel multifunctional resin with improved mechanical property, desirable antibacterial activity and remineralization capability is promising to combat secondary caries.

Review on Development and Dental Applications of Polyetheretherketone-Based Biomaterials and Restorations.

Polyetheretherketone (PEEK) is an important high-performance thermoplastic. Its excellent strength, stiffness, toughness, fatigue resistance, biocompatibility, chemical stability and radiolucency have made PEEK attractive in dental and orthopedic applications. However, PEEK has an inherently hydrophobic and chemically inert surface, which has restricted its widespread use in clinical applications, especially in bonding with dental resin composites. Cutting edge research on novel methods to improve PEEK applications in dentistry, including oral implant, prosthodontics and orthodontics, is reviewed in this article. In addition, this article also discusses innovative surface modifications of PEEK, which are a focus area of active investigations. Furthermore, this article also discusses the necessary future studies and clinical trials for the use of PEEK in the human oral environment to investigate its feasibility and long-term performance.

[Development of novel self-adhesive resin cement with antibacterial and self-healing properties].

OBJECTIVE: This study aimed to develop novel self-adhesive resin cement with antibacterial and self-healing properties. Furthermore, the dentin bonding strength, mechanical properties, self-healing efficiency, and antibacterial property of the developed cement were measured. METHODS: Novel nano-antibacterial inorganic fillers that contain quaternary ammonium salts with long-chain alkyls were synthesized. These fillers were added into self-adhesive resin cement containing self-healing microcapsules at mass fractions of 0, 2.5%, 5.0%, 7.5%, or 10.0%. The dentin shear bonding test was used to test the bonding strength, whereas the flexural test was used to measure the flexural strength and elastic modulus of the cement. The single-edge V-notched beam method was used to measure self-healing efficiency, and human dental plaque microcosm biofilms were chosen to calculate the antibacterial property. RESULTS: The dentin shear bond strength significantly decreased when the mass fraction of the nano-antibacterial inorganic fillers in the novel cement reached 7.5% (P<0.05). The incorporation of 0, 2.5%, 5.0%, 7.5%, or 10.0% mass fraction of nano-antibacterial inorganic fillers did not adversely affect the flexural strength, elastic modulus, fracture toughness, and self-healing efficiency of the cement (P>0.1). Resin cement containing 2.5% mass fraction or more nano-antibacterial inorganic fillers significantly inhibited the metabolic activity of dental plaque microcosm biofilms, indicating strong antibacterial potency (P<0.05). CONCLUSIONS: The novel self-adhesive resin cement exhibited promising antibacterial and self-healing properties, which enable the cement to be used for dental applications.

[Application and potential future directions of self-healing polymers in dentistry].

Self-healing materials have rapidly developed in recent years to overcome the micro-cracks occurring in the polymer matrix. Self-healing ability offers autonomous crack repairs to prolong the service lives of polymers or polymer composites. As a main approach, extrinsic self-healing materials based on microcapsules have been applied in dentistry recently. This paper comprehensively presented and reviewed the definition and classification of self-healing materials, the synthesis of microcapsules, the calculation of self-healing efficiency, and the application of self-healing materials in dentistry. The future directions of self-healing polymers are also discussed.

Biocompatible Fe3O4/chitosan scaffolds with high magnetism.

Durable and biocompatible magnetic scaffolds prepared by simple approaches are important for the development of tissue engineering. In this work, by freeze-drying method and without using any crosslinker, we successfully fabricated Fe3O4/chitosan magnetic scaffolds that belong to hard magnetic materials and are stable in physiological fluid. In vitro biocompatibility assay showed that mouse mesenchymal progenitor cells grow normally on the surface of the scaffolds. So these magnetic scaffolds have potentials to be used in tissue engineering as implants that independently direct drug targeting.

Self-healing adhesive with antibacterial activity in water-aging for 12 months.

OBJECTIVE: Secondary caries and micro-cracks are the main limiting factors for dentin bond durability. The objectives of this study were to develop a self-healing adhesive containing dimethylaminohexadecyl methacrylate (DMAHDM) and nanoparticles of amorphous calcium phosphate (NACP), and investigate the effects of water-aging for 12 months on self-healing, dentin bonding, and antibacterial properties for the first time. METHODS: Microcapsules were synthesized with poly (urea-formaldehyde) (PUF) shells containing triethylene glycol dimethacrylate (TEGDMA) and N,N-dihydroxyethyl-p-toluidine (DHEPT). The adhesive contained 7.5% microcapsules, 10% DMAHDM, and 20% NACP (all mass). Specimens were water-aged at 37 °C for 1 day to 12 months. Dentin bond strength was measured using extracted human teeth. A single-edge-V-notched-beam (SEVNB) method was used to measure fracture toughness KIC and self-healing efficiency. A dental plaque microcosm biofilm model was used with human saliva as inoculum. RESULTS: The microcapsules + DMAHDM + NACP group showed no decline in dentin bond strength after water-aging for 12 months, which was significantly higher than that of other groups without DMAHDM (p < 0.05). A self-healing efficiency of 67% recovery in KIC was obtained even after 12 months of water immersion, indicating that the self-healing ability was not lost in water-aging (p > 0.1). The bacteria-killing ability of this adhesive did not decline from 1 day to 12 months (p > 0.1), with biofilm CFU reduction by 3-4 orders of magnitude after the resin was water-aged for 12 months, compared to control resin. SIGNIFICANCE: This novel adhesive with triple merits of self-healing, antibacterial and remineralization functions showed an excellent long-term durability in water-aging for 12 months. This multifunctional adhesive has the potential for dental applications to heal cracks, inhibit bacteria, provide ions for remineralization, and increase the restoration longevity.

[Effect of water immersion on a dental self-healing and antibacterial resin composite].

OBJECTIVE: This investigation aimed to develop a novel self-healing and antibacterial dental resin composite. The effects of water immersion on its properties were also evaluated. METHODS: Microcapsules filled with healing agent of triethylene glycol dimethacrylate were synthesized on the basis of previous studies. Antibacterial resin composite contained nano-antibacterial inorganic fillers that were modified by quaternary ammonium salt with long-chain alkyl. Microcapsules were incorporated into antibacterial resin composite at mass fraction of 7.5%. A commercial resin composite named Tetric N-Ceram was used as control. The resin samples were immersed in 37 °C distilled water for different periods. A flexural test was used to measure the mechanical properties of the novel resin composite. A single-edge V-notched beam method was used to measure fracture toughness and self-healing efficiency. A dental plaque microcosm biofilm model with human saliva as inoculum was formed. Colony-forming units (CFU) and lactic acid production of biofilm on the novel resin composite were calculated to test the antibacterial property. RESULTS: Mechanical properties and fracture toughness decreased significantly after the composite was immersed in water for 30 days (P<0.05), and no significant reduction was found from then on (P>0.05). Water immersion did not weaken the self-healing capability of the composite (P>0.05), and self-healing efficiency of 64% could still be obtained even after 270 days. The antibacterial resin composite showed a strong inhibition effect on the biofilm metabolic activity versus water immersion time from 1 day to 270 days. Therefore, the composite could still have a promising antibacterial property even after being immersed in water (P<0.05). CONCLUSIONS: Water immersion could weaken the mechanical properties of the novel self-healing and antibacterial resin composite, but it insignificantly affected the self-healing and antibacterial properties of the composite.